Scribd
Upload
119 views2 pages

Gujarat Technological University: B.E Semester: 3 Aeronautical Engineering

This document outlines the course content for Analyses of Mechanism and Machine Elements, a subject in the 3rd semester of the Aeronautical Engineering program at Gujarat Technological University. The course covers [1] analysis of mechanisms including velocity, acceleration, and force analysis of linkages and slider crank mechanisms, and [2] analysis of machine elements including stresses, riveted and welded joints, pressure vessels, and shaft design. Reference books on theory of machines, mechanisms, and machine design are also listed.

Uploaded by

jay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
119 views2 pages

Gujarat Technological University: B.E Semester: 3 Aeronautical Engineering

This document outlines the course content for Analyses of Mechanism and Machine Elements, a subject in the 3rd semester of the Aeronautical Engineering program at Gujarat Technological University. The course covers [1] analysis of mechanisms including velocity, acceleration, and force analysis of linkages and slider crank mechanisms, and [2] analysis of machine elements including stresses, riveted and welded joints, pressure vessels, and shaft design. Reference books on theory of machines, mechanisms, and machine design are also listed.

Uploaded by

jay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

GUJARAT TECHNOLOGICAL UNIVERSITY

B.E Semester: 3
Aeronautical Engineering
Subject Code 130103
Subject Name Analyses of Mechanism and Machine Elements

[Link] Course content

Analysis of Mechanism

1. Introduction to mechanism & machine :


link, kinematic pair, degrees of freedom, classification of kinematic pairs,
inversions of four bar chain, slide crank mechanism & double slider crank
mechanism.

2. Velocity and Acceleration analysis –


Velocity analysis: Absolute & relative motion, vectors, motion of a link,
Velocity analysis of four-link mechanism & slider crank mechanism, angular
velocity of links, velocity of rubbing, I- centre method, Kennedy’s theorem,
and centrode. Acceleration analysis: Acceleration, Acceleration analysis of
four-link mechanism & slider crank mechanism, corioli’s acceleration
component, crank & slotted lever mechanism.

3. Force Analysis –
Static force analysis: Introduction to static force analysis, superposition,
principle of virtual work, Dynamic force analysis: D’Alembert’s principle,
dynamic analysis of slider crank chain, velocity & acceleration of piston,
engine force analysis, inertia of connecting rod.

Analysis of Machine elements

4. Introduction to Simple Stresses :


Definition, classification, general procedure, physical & mechanical
properties of materials, stress strain diagram, Tensile stress & strain,
compressive stress & strain, shear stress & strain, crushing & bearing
stress, factor of safety, linear & lateral strain, Poission’s ratio, volumetric
strain, impact stress.

5. Torsional and Bending stresses :


Torsional shear stress, shafts subjected to torsion, shafts in series &
parallel, bending stress in straight beams. Maximum principal stress theory,
Maximum shear stress theory, Maximum strain energy theory, Maximum
distortion energy theory.
6. Riveted and Welded joints –
Riveted joints:
Methods of riveting, types of rivet heads, types of riveted joints,
terminology, and strength of a riveted joint, efficiency of a riveted joint,
riveted joints for structural use.
Welded joints:
Advantages & disadvantages of welded joints over riveted joints, welding
processes, types of welded joints, strength of transverse fillet welded joint,
strength of parallel fillet welded joint, strength of butt joint, stresses on
welded joints, axially loaded unsymmetrical welded section, eccentrically
loaded welded joints.

7. Pressure vessels:
Classification, stresses in thin shell cylinders due to internal pressure, Hoop
stress, longitudinal stress, change in dimension, thick cylindrical shell
subjected to internal pressure, compound cylindrical shell.

8. Shafts :
Types of shafts, material of shafts, ASME codes for shaft design, stresses
in shaft, design of shafts subjected to twisting moment only, design of
shafts subjected to bending moment only, design of shafts subjected to
combined twisting & bending, design of shafts subjected to axial load in
addition to combined twisting & bending. Combined twisting & bending,
design of shaft on the basis of rigidity.

Reference Books:
1. Theory of Machines by [Link]
2. Theory of Machines and mechanisms by [Link]
3. Machine design by [Link]
4. Design of machine elements by V.B. Bhandar
5. Design of Machine elements by R S Khurmi.

You might also like