Scribd
Upload
207 views1 page

Arkhangelsk Pulp Mill Technical Data

This document provides technical parameters for semichemical fluting produced by Arkhangelsk Pulp and Paper Mill, JSC located in Novodvinsk, Arkhangelsk Region, Russia. It lists 7 key parameters including substance (basis weight), tensile strength, moisture content and test methods. Substance can range from 90 to 175 g/m2. Tensile strength MD must be at least 7.0 kN/m or higher depending on substance. Moisture content must be within 7+2/-1%

Uploaded by

arcepp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
207 views1 page

Arkhangelsk Pulp Mill Technical Data

This document provides technical parameters for semichemical fluting produced by Arkhangelsk Pulp and Paper Mill, JSC located in Novodvinsk, Arkhangelsk Region, Russia. It lists 7 key parameters including substance (basis weight), tensile strength, moisture content and test methods. Substance can range from 90 to 175 g/m2. Tensile strength MD must be at least 7.0 kN/m or higher depending on substance. Moisture content must be within 7+2/-1%

Uploaded by

arcepp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Arkhangelsk Pulp and Paper Mill, JSC

1, Melnikov st., Novodvinsk


Arkhangelsk reg., Russia, 164900
Phone: +7(81852) 6-35-00
Fax: +7(81852) 6-32-31
[Link]
info@[Link]

SEMICHEMICAL FLUTING
Technical Parameter Test method
GOST 13199/
1. Substance, g/m2 90+/-4 95+/-4 100+/-4 105+/-4 112+/-4 120+/-5 125+/-5 127+/-5 135+/-6 140+/-6 165+/-7 175+/-7
ISO 536
Typical value 170 180 210 210 240 260 280 280 300 310 320 350 GOST 20682 /
2. CMT30, N, not less, strip width
Guaranteed
– 12.7 mm, 150 160 180 180 210 250 250 250 270 280 290 300 ISO 7263
value
3. CCT30, kN/m, Typical value 1,2 1,3 1,4 1,5 1,7 1,9 2,0 2,0 2,4 2,4 3,0 3,2
Guaranteed GOST 28686
not less, strip width – 12.7 mm. 1,0 1,1 1,2 1,2 1,4 1,5 1,6 1,6 2,0 2,0 2,6 2,8
value
Typical value 1,8 1,9 2,0 2,2 2,4 2,6 2,7 2,8 3,2 3,2 3,7 4
4. SCT CD, kN/m Guaranteed ISO 9895
1,4 1,4 1,6 1,7 1,9 2,0 2,2 2,2 2,5 2,5 3,2 3,3
value
GOST 12605 /
5. Cobb30, g/m2 not less 50 50 50 50 50 50 50 50 50 50 50 50
ISO 535

6. Tensile strength MD, kN/m not less 7,0 7,0 8,0 8,0 9,0 10,0 10,0 10,0 12,0 12,0 14,0 15,0 GOST 13525.1

GOST 13525.19
7. Moisture, %. 7+2/-1 7+2/-1 7+2/-1 7+2/-1 7+2/-1 7+2/-1 7+2/-1 7+2/-1 7+2/-1 7+2/-1 7+2/-1 7+2/-1
ISO 287
Tested at 23 0C 50%RH

ISO 9001:2008
ISO 14001:2004

tech data are valid for 2019

You might also like