Scribd
Upload
159 views1 page

Certificate of Compliance for Masks

The certificate is for the Yiwu Panfeng Non-woven Fabrics Co., Ltd. and certifies that their daily protective masks have been verified to comply with European standard EN 149:2001+A1:2009. The masks were tested under report number XMT0202001032LY/PPE and were found to satisfy the requirements for the European Conformity (ECM) Certification Mark. The certificate is valid from March 13, 2020 until March 12, 2025.

Uploaded by

Lalo cura
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
159 views1 page

Certificate of Compliance for Masks

The certificate is for the Yiwu Panfeng Non-woven Fabrics Co., Ltd. and certifies that their daily protective masks have been verified to comply with European standard EN 149:2001+A1:2009. The masks were tested under report number XMT0202001032LY/PPE and were found to satisfy the requirements for the European Conformity (ECM) Certification Mark. The certificate is valid from March 13, 2020 until March 12, 2025.

Uploaded by

Lalo cura
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Certificate – Cертификат – 證明書 – Certificat – 증명서 – ‫شهادة‬

Certificate of Compliance
No. 0H200313.YPNU67
Test Report no. XMT0202001032LY/PPE

Certificate’s Yiwu Panfeng Non-woven Fabrics


Holder: Co., Ltd.
First Phases of Huanglinshan industrial Zone, Yiting
town, Yiwu City, Zhejiang Province.

Certification ECM
Mark: European Type
Conformity Approved

Product: Daily protective mask


Model(s): 17.5cm×9.5cm, 11.5cm×11.5cm

Verification to: Standard:


EN 149:2001+A1:2009

related to CE Directive(s):
R 2016/425 (Personal Protective Equipment)

Remark: The product(s) has been verified on a voluntary basis. The product(s) satisfies the requirements of
the Certification Mark of ECM, in reference to the above listed Standard(s). The above Compliance Mark
can be affixed on the product(s) accordingly to the ECM regulation about its release and its use. The
regulation can be found at www.entecerma.it. This Certificate of Compliance can be checked for validity
at www.entecerma.it
This verification doesn’t imply assessment of the production of the product(s).
Additional information, clarification about the Marking:
We attest that a TCF for the Marking process is in place. Whereas the
Manufacturer is Responsible to start the Marking Certification Procedure through
an appointed Notified Body and the perform all the necessary activities, as required
by the Directive and accepted by the Notified Body, before placing the Mark on
the product(s).

Date of issue 13 March 2020 Expiry date 12 March 2025

Service Manager Deputy Manager


Luca Bedonni Amanda Payne

Ente Certificazione Macchine Srl


Via Ca’ Bella, 243 – Loc. Castello di Serravalle – 40053 Valsamoggia (BO) - ITALY
 +39 051 6705141  +39 051 6705156  [email protected]  www.entecerma.it

You might also like