Scribd
Upload
542 views1 page

SG 460-SS

This document provides information about SG 460 SS high performance slip seal grease. It is designed for maximum wear protection in applications requiring high load capacity such as slip seals in kiln sponge iron plants. Key characteristics include a lithium complex thickener, mineral base oil with a viscosity of 460 cSt, NLGI grade 2/1, and protection against corrosion and water washout. It offers benefits such as excellent work stability, adherence, and an extended re-lubrication period.

Uploaded by

varun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
542 views1 page

SG 460-SS

This document provides information about SG 460 SS high performance slip seal grease. It is designed for maximum wear protection in applications requiring high load capacity such as slip seals in kiln sponge iron plants. Key characteristics include a lithium complex thickener, mineral base oil with a viscosity of 460 cSt, NLGI grade 2/1, and protection against corrosion and water washout. It offers benefits such as excellent work stability, adherence, and an extended re-lubrication period.

Uploaded by

varun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

SG 460 SS

High Performance Slip Seal Grease


Benefits :
 Designed for maximum wear protection.
 High load carrying capacity.
 Excellent work stability.
 Good adherence to base metal.
 Offers very good corrosion protection.
 Extended re-lubrication period.
 A specifically designed product keeping slip seal application in mind.

Applications :
 Primarily formulated product to meet slip seal application requirements in sponge iron plants.
 For slip seals in kilns.
 For high load and low speed applications in steel and other related plants.

Characteristics Test Method Unit Specifications

Appearance Visual – Smooth


Colour Visual – Amber
Base [Thickener] – – Lithium Complex
Base Oil – – Mineral
Base Oil Viscosity @ 40°C ASTM D-445 cSt 460
Flash Point (of Base Oil) [min.] ASTM D-92 °C 270
NLGI Grade – – # 2/1
Worked Penetration ASTM D-217 0.1 mm 290-310
Water Washout @ 80°C, wt. loss ASTM D-1264 % <5
Copper Strip Corrosion Test ASTM D-4048 rating 1a
Operating Temperature Range - °C -20/+250

MSDS available on request.


Due to continual upgradation of products above data is subject to change without notice.
This supersedes our previously issued data sheets. [REV. 4 / 01.04.18]

Information and data given herein is offered in good faith as accurate, but without guarantee. Conditions of use and suitability of a product for a particular use is
beyond our control; all risks of use of the product are therefore assumed by the user and W E EXPRESSLY DISCLAIM ALL WARRANTIES OF EVERY KIND AND
NATURE.

Anand Engineers Pvt Ltd. 66, MIDC, Road No. 13, Andheri (East), Mumbai - 400093,INDIA.
Tel :+91 22 28219292/8/9 Fax: +91 22 28379337 Email: [email protected] Web: www.molygraph.com

You might also like