Scribd
Upload
925 views8 pages

Steel Specification Standards Overview

1. The document provides the chemical composition specifications for various grades of steel, listing the allowable percentages of elements like carbon, manganese, phosphorus, sulfur, and silicon. 2. Over 30 steel grades are specified, ranging from low carbon steels to higher carbon and alloy steels, each with limits for major alloying elements. 3. The specifications are intended to establish quality control standards for steel production and ensure mechanical properties meet requirements.

Uploaded by

Peter Antony
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
925 views8 pages

Steel Specification Standards Overview

1. The document provides the chemical composition specifications for various grades of steel, listing the allowable percentages of elements like carbon, manganese, phosphorus, sulfur, and silicon. 2. Over 30 steel grades are specified, ranging from low carbon steels to higher carbon and alloy steels, each with limits for major alloying elements. 3. The specifications are intended to establish quality control standards for steel production and ensure mechanical properties meet requirements.

Uploaded by

Peter Antony
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Steel Specification Standards: Lists steel grades along with their chemical composition specifications including percentages of elements like Carbon, Manganese, Silicon, etc., and any relevant notes or conditions related to the specification.
  • Notes on Chemical Composition: Provides additional notes regarding standards for the chemical composition of steel grades and specific considerations for certain elements.

KALYANI

FORGE

SUBJECT : Steel Specification Standard DEPT. : QA


REF. NO. : QA-SD-05
FIRST RELEASED ON :
02/01/2004
GRADE %C % Mn %P %S % Si % Cr % Ni % Mo % Al % Cu %V % Ti
- - - 0.020 - - - - 0.020 - - -
Fe410WA
0.23 1.50 0.035 0.035 0.40 - - - 0.040 - - -
- 0.25 - 0.020 0.15 - - - 0.020 - - -
SAE1006
0.08 0.40 0.035 0.035 0.35 - - - 0.040 - - -
0.08 0.30 - 0.020 0.15 - - - 0.020 - - -
SAE1010
0.13 0.60 0.035 0.035 0.35 - - - 0.040 - - -
0.12 0.30 - - 0.15 - - - 0.020 - - -
C15
0.18 0.60 0.045 0.045 0.35 - - - 0.040 - - -
0.13 0.30 - 0.020 0.15 - - - 0.020 - - -
S15C
0.18 0.60 0.03 0.035 0.35 - - - 0.040 - - -
0.10 0.60 - - 0.15 - - - 0.020 - - -
15C8
0.20 0.90 0.050 0.050 0.35 - - - 0.040 - - -
0.18 0.30 - 0.020 0.15 - - - 0.020 - - -
S20C
0.23 0.60 0.030 0.035 0.35 - - - 0.040 - - -
0.25 0.70 - 0.020 0.05 - - - 0.020 - - -
En5A
0.30 0.90 0.035 0.035 0.35 - - - 0.040 - - -
0.25 0.60 0.020 0.05 - - - 0.020 - - -
C30
0.35 0.90 0.035 0.035 0.35 - - - 0.040 - - -
0.30 0.60 - - 0.15 - - - 0.020 - - -
35C8
0.40 0.90 0.050 0.050 0.35 - - - 0.040 - - -
0.32 0.50 - - 0.15 - - - 0.020 - - -
C35
0.39 0.80 0.045 0.045 0.35 - - - 0.040 - - -
S35C / 0.32 0.60 - 0.020 0.15 - - - 0.020 - - -
SAE1035 0.38 0.90 0.030 0.035 0.35 - - - 0.040 - - -
RELEASED CONTROLLED BY APPROVED BY REVISION NO. COPY NO.

0
QA HEAD
PREPARED BY REVISION DT PAGE NO.

---- 10 of 17
QA HEAD

KALYANI
FORGE

SUBJECT : Steel Specification Standard DEPT. : QA


REF. NO. : QA-SD-05
FIRST RELEASED ON :
02/01/2004
GRADE %C % Mn %P %S % Si % Cr % Ni % Mo % Al % Cu %V % Ti
CK35M / 0.35 0.60 - 0.020 0.15 0.20 - - 0.020 - - -
35C8M 0.40 0.90 0.035 0.035 0.35 0.30 - - 0.040 - - -
0.40 0.70 - 0.020 0.05 - - - 0.020 - - -
En8D
0.45 0.90 0.035 0.035 0.35 - - - 0.040 - - -
0.40 0.60 - - 0.15 - - - 0.020 - - -
45C8
0.50 0.90 0.050 0.050 0.35 - - - 0.040 - - -
45C8 0.42 0.60 0.020 0.10 0.020 -
TELCO 0.50 0.90 0.035 0.035 0.35 0.040 -
0.42 0.60 - 0.020 0.15 - - - 0.020 - - -
S45C
0.48 0.90 0.030 0.035 0.35 - - - 0.040 - - -
0.40 0.50 0.020 0.15 - - - 0.020 - - -
C43
0.46 0.80 0.030 0.035 0.40 0.040 - - -
CK45/C45 0.42 0.50 - 0.020 0.15 - - - 0.020 - - -
0.50 0.80 0.035 0.035 0.35 - - - 0.040 - - -
CK45M 0.43 0.60 - 0.020 0.15 0.17 - - 0.020 - - -
0.48 0.75 0.035 0.035 0.35 0.23 - - 0.040 - - -
0.18 0.30 - - 0.15 - - - 0.020 - - -
SAE 1020
0.23 0.60 0.040 0.050 0.35 - - - 0.040 - - -
0.15 0.60 - - 0.15 - - - 0.020 - - -
CL-II
0.25 0.90 0.050 0.050 0.35 - - - 0.040 - - -
0.28 0.60 0.020 0.15 - - - 0.020 - - -
SAE1030
0.34 0.90 0.035 0.035 0.35 - - - 0.040 - - -
RELEASED CONTROLLED BY APPROVED BY REVISION NO. COPY NO.

0
QA HEAD
PREPARED BY REVISION DT PAGE NO.

---- 11 of 17
QA HEAD
KALYANI
FORGE

SUBJECT : Steel Specification Standard DEPT. : QA


REF. NO. : QA-SD-05
FIRST RELEASED ON :
02/01/2004
GRADE %C % Mn %P %S % Si % Cr % Ni % Mo % Al % Cu %V % Ti
0.35 0.60 - 0.020 0.15 - - - 0.020 - - -
SAE 1038
0.42 0.90 0.035 0.035 0.35 - - - 0.040 - - -
0.45 0.60 - 0.020 0.15 - - - 0.020 - - -
S48C
0.51 0.90 0.030 0.035 0.35 - - - 0.040 - - -
S48C 0.48 0.80 - 0.020 0.15 0.20 - - 0.020 - - -
( M&M ) 0.51 0.90 0.030 0.035 0.35 0.30 - - 0.040 - - -
0.15 0.70 - 0.020 0.15 - - - 0.020 - - -
SAE1019
0.20 1.00 0.035 0.035 0.35 - - - 0.040 - - -
0.15 1.30 - 0.020 0.1 - - - 0.020 - - -
En14A
0.25 1.70 0.035 0.035 0.35 - - - 0.040 - - -
0.35 1.60 - 0.020 0.10 - - - 0.020 - - -
En15
0.40 1.70 0.035 0.035 0.35 - - - 0.040 - - -
0.32 1.30 - 0.020 0.10 - - - 0.020 - - -
37C15
0.42 1.70 0.035 0.035 0.35 - - - 0.040 - - -
0.50 0.60 - - 0.15 - - - 0.020 - - -
S53C
0.56 0.90 0.030 0.035 0.35 - - - 0.040 - - -
S55C 0.52 0.60 - 0.020 0.15 - - - 0.020 - - -
0.58 0.90 0.030 0.035 0.35 - - - 0.040 - - -
0.50 0.50 - 0.020 0.05 - - - 0.020 - - -
En9
0.60 0.80 0.035 0.035 0.35 - - - 0.040 - - -
RELEASED CONTROLLED BY APPROVED BY REVISION NO. COPY NO.

0
QA HEAD
PREPARED BY REVISION DT PAGE NO.

---- 12 of 17
---- 12 of 17
QA HEAD

KALYANI
FORGE

SUBJECT : Steel Specification Standard DEPT. : QA


REF. NO. : QA-SD-05
FIRST RELEASED ON :
02/01/2004
GRADE %C % Mn %P %S % Si % Cr % Ni % Mo % Al % Cu %V % Ti
0.50 0.60 0.020 0.15 - - - 0.020 - - -
SAE1055
0.60 0.90 0.035 0.035 0.35 - - - 0.040 - - -
0.50 0.65 - 0.010 0.15 - - - 0.015 - - -
CF53
0.56 0.80 0.025 0.025 0.30 - - - 0.040 0.25 - -
0.45 0.60 - 0.015 0.10 - - - 0.015 - - -
XC45
0.50 0.80 0.025 0.030 0.40 - - - 0.040 0.25 - -
0.45 0.60 - 0.040 0.15 - - - 0.020 - - -
S48CS1
0.51 1.00 0.030 0.070 0.35 - - - 0.040 - - -
0.07 0.80 - 0.200 - - - - 0.020 - - -
En1A
0.15 1.20 0.070 0.300 0.10 - - - 0.040 - - -
0.35 0.60 - 0.02 0.05 - - - 0.020 - - -
En8
0.45 1.00 0.035 0.035 0.35 - - - 0.040 - - -
0.35 0.80 - 0.140 - - - - - - - -
40C10S18
0.45 1.20 0.060 0.220 0.25 - - - - - - -
0.35 1.00 - 0.120 - - - - - - - -
En8M
0.45 1.30 0.060 0.200 0.25 - - - - - - -
0.10 0.60 - - 0.05 - - - 0.020 - - -
En32B
0.18 1.00 0.050 0.070 0.35 - - - 0.040 - - -
0.37 0.70 - 0.080 0.15 - - - - - - -
SAE 1140
0.44 1.00 0.040 0.130 0.35 - - - - - - -
RELEASED CONTROLLED BY APPROVED BY REVISION NO. COPY NO.

0
QA HEAD
PREPARED BY REVISION DT PAGE NO.

---- 13 of 17
QA HEAD
KALYANI
FORGE

SUBJECT : Steel Specification Standard DEPT. : QA


REF. NO. : QA-SD-05
FIRST RELEASED ON :
02/01/2004
GRADE %C % Mn %P %S % Si % Cr % Ni % Mo % Al % Cu %V % Ti
0.37 1.35 - 0.080 0.15 - - - - - - -
SAE 1141
0.45 1.65 0.040 0.130 0.35 - - - - - - -
0.36 1.35 - 0.020 0.15 - - - 0.020 - - -
SAE 1541
0.44 1.65 0.035 0.035 0.35 - - - 0.040 - - -
16MnCr5 / 0.14 1.00 - 0.020 0.15 0.80 - - 0.020 - - -
16MnCrS5 0.19 1.30 0.035 0.035 0.40 1.10 - - 0.040 - - -
0.17 1.10 - 0.020 0.15 1.00 - - 0.020 - - -
20MnCr5
0.22 1.40 0.035 0.035 0.40 1.30 - - 0.040 - - -
0.18 0.60 - - 0.15 0.90 - - 0.020 - - -
SCr420H2V2
0.23 0.85 0.030 0.030 0.35 1.20 - - 0.040 - - -
0.30 0.60 - 0.020 0.15 0.90 - - 0.020 - - -
34Cr4
0.37 0.90 0.035 0.035 0.40 1.20 - - 0.040 - - -
0.36 0.70 - 0.020 0.15 1.05 - - 0.025 - - -
39Cr5
0.42 1.00 0.035 0.040 0.30 1.30 - - 0.040 - - -
0.35 0.60 - 0.020 0.10 0.90 - - 0.020 - - -
40Cr4
0.45 0.90 0.035 0.035 0.35 1.20 - - 0.040 - - -
0.35 0.60 - 0.020 0.10 1.00 - - 0.020 - - -
40Cr4B
0.40 0.90 0.035 0.035 0.35 1.20 - - 0.040 - - -
0.36 0.60 0.025 0.10 0.90 - - 0.020 - - -
530A32
0.44 0.90 0.035 0.035 0.35 1.20 - - 0.040 - - -
RELEASED CONTROLLED BY APPROVED BY REVISION NO. COPY NO.

0
QA HEAD
PREPARED BY REVISION DT PAGE NO.

---- 14 of 17
QA HEAD
KALYANI
FORGE

SUBJECT : Steel Specification Standard DEPT. : QA


REF. NO. : QA-SD-05
FIRST RELEASED ON :
02/01/2004
GRADE %C % Mn %P %S % Si % Cr % Ni % Mo % Al % Cu %V % Ti
0.38 0.50 - 0.020 0.15 0.90 - - 0.020 - - -
41Cr4
0.44 0.80 0.035 0.035 0.35 1.20 - - 0.040 - - -

41Cr4 ( BAL )
0.41 0.75 - 0.015 0.15 1.05 - - 0.015 - - -
0.45 0.90 0.035 0.035 0.40 1.20 - - 0.035 - - -
0.44 0.60 - 0.020 0.15 1.05 - - 0.020 - - -
41Cr4M
0.49 0.90 0.030 0.035 0.35 1.20 - - 0.040 - - -
En16C 0.35 1.30 - 0.020 0.10 - - 0.20 0.020 - - -
0.40 1.80 0.035 0.035 0.35 - - 0.35 0.040 - - -
0.32 1.30 - 0.020 0.10 - - 0.22 0.020 - - -
605M36
0.40 1.70 0.035 0.035 0.35 - - 0.32 0.040 - - -
0.35 0.50 - 0.020 0.10 0.90 - 0.20 0.020 - - -
En19
0.45 0.80 0.035 0.035 0.35 1.50 - 0.40 0.040 - - -
EN19A 0.35 0.50 - 0.020 0.10 0.90 - 0.20 0.020 - - -
0.45 0.80 0.035 0.035 0.35 1.20 - 0.35 0.040 - - -
0.40 0.50 - 0.020 0.10 0.90 - 0.20 0.020 - - -
En19C
0.45 0.80 0.035 0.035 0.35 1.20 - 0.35 0.040 - - -
0.35 0.45 - 0.020 0.10 0.90 1.30 0.20 0.020 - - -
En24
0.45 0.70 0.035 0.035 0.35 1.40 1.80 0.35 0.040 - - -
- 0.50 - 0.020 - 0.75 1.00 0.08 0.020 - - -
En353
0.20 1.00 0.035 0.035 0.35 1.25 1.50 0.15 0.040 - - -
0.50 - 0.020 - 0.75 1.50 0.10 0.020 - - -
En354
0.20 1.00 0.035 0.035 0.35 1.25 2.00 0.20 0.040 - - -
RELEASED CONTROLLED BY APPROVED BY REVISION NO. COPY NO.

0
QA HEAD
PREPARED BY REVISION DT PAGE NO.

---- 15 of 17
QA HEAD
KALYANI
FORGE

SUBJECT : Steel Specification Standard DEPT. : QA


REF. NO. : QA-SD-05
FIRST RELEASED ON :
02/01/2004
GRADE %C % Mn %P %S % Si % Cr % Ni % Mo % Al % Cu %V % Ti
0.35 0.50 0.020 0.10 0.90 - 0.20 0.020 - - -
40Cr4Mo3
0.45 0.80 0.035 0.035 0.35 1.20 - 0.35 0.040 - - -
42CrMo4 / 0.38 0.50 - 0.020 0.15 0.90 - 0.15 0.020 - - -
42CrMoS4 0.45 0.80 0.035 0.035 0.40 1.20 - 0.30 0.040 - - -
SAE4140H 0.37 0.65 - 0.020 0.15 0.75 - 0.15 0.020 - - -
0.44 1.10 0.035 0.035 0.30 1.20 - 0.25 0.040 - - -
0.18 0.70 - 0.020 0.15 0.40 0.40 0.15 0.020 - - -
SAE8620
0.23 0.90 0.035 0.035 0.30 0.60 0.70 0.25 0.040 - - -
0.17 0.60 - 0.020 0.15 0.35 0.35 0.15 0.020 - - -
SAE8620H
0.23 0.95 0.035 0.035 0.30 0.65 0.75 0.25 0.040 - - -
0.17 0.60 0.015 0.20 0.35 0.35 0.15 0.020 - - -
SAE8620HM
0.23 0.95 0.03 0.035 0.35 0.65 0.75 0.25 0.040 - - -
SCM415H 0.12 0.55 - - 0.15 0.85 - 0.15 0.020 - - -
0.18 0.90 0.030 0.030 0.35 1.25 - 0.35 0.040 - - -
SCM420H 0.17 0.55 - 0.010 0.15 0.85 - 0.10 0.020 - - -
( HHML ) 0.23 0.90 0.030 0.030 0.35 1.25 - 0.25 0.040 - - -
SCM420H 0.17 0.55 - 0.015 - 0.85 - 0.15 0.015
( BAL ) 0.23 0.90 0.035 0.035 0.25 1.25 - 0.35 0.035
0.17 0.55 - - 0.15 0.85 - 0.15 0.020 - - -
SCM420H
0.23 0.90 0.030 0.030 0.35 1.25 - 0.35 0.040 - - -
RELEASED CONTROLLED BY APPROVED BY REVISION NO. COPY NO.

0
QA HEAD
PREPARED BY REVISION DT PAGE NO.

---- 16 of 17
QA HEAD
KALYANI
FORGE

SUBJECT : Steel Specification Standard DEPT. : QA


REF. NO. : QA-SD-05
FIRST RELEASED ON :
02/01/2004
GRADE %C % Mn %P %S % Si % Cr % Ni % Mo % Al % Cu %V % Ti
SCM420H 0.18 0.60 - - 0.15 0.90 - 0.15 0.020 - - -
TVSM 0.23 0.85 0.030 0.030 0.35 1.20 - 0.30 0.040 - - -
0.17 0.55 - - 0.15 0.85 - 0.15 0.020 - - -
SCM420KC1
0.23 0.90 0.030 0.030 0.35 1.25 - 0.35 0.040 - - -
0.15 0.60 - 0.010 - 0.90 - 0.40 0.020 - - -
DSG-1
0.21 0.90 0.015 0.020 0.15 1.20 - 0.50 0.040 - - -
38MnSiVS5 / 0.35 1.30 - 0.045 0.50 0.10 0.10 - 0.020 - 0.08 -
KRUPP1538 0.40 1.50 0.035 0.065 0.70 0.20 0.20 - 0.030 - 0.12 0.015
45M5BTUA2 0.41 0.95 - 0.060 0.10 - - - 0.015 - - -
* 0.45 1.30 0.025 0.090 0.40 0.25 0.25 0.05 0.040 0.40 - 0.010
- - - - - - - - 0.020 - - -
St 52-3
0.20 1.80 0.035 0.035 0.55 - - - 0.040 - - -
0.39 0.66 0.150 0.07 - - - - - - -
45S20U
0.53 1.15 0.065 0.280 0.33 - - - - - - -

Note : a) For all other grades, chemical composition shall be as per relevent international
standard. However S % & Al % shall be maintained at a minimum 0.020 % for all
grades, except the resulpharised grades.
b) In case of S48C & S53C, Ni + Cr should be less than 0.35 %
c) For Grade 45M5BTUA2 the Mn euivalevt should be 1.50 to 1.65
RELEASED CONTROLLED BY APPROVED BY REVISION NO. COPY NO.

0
QA HEAD
PREPARED BY REVISION DT PAGE NO.

---- 17 of 17
QA HEAD

You might also like