Connection Panel (depending on the model)

COLOUR TELEVISION ➢ The product colour and shape may vary depending on the
model.

Rear Panel Front (or Side) Panel

Owner’s Instructions 1 Audio input

Before operating, please read this manual thoroughly,
and retain it for future reference. 2 Video input
or
Register your product at www.samsung.com/global/register.
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________ cable television
network

Connecting to the RCA Input

The 1 (AUDIO-L/R or AUDIO) and 2 (VIDEO) connectors
☛ Whenever you connect an audio or video system to your are used for equipment, such as a camcorder, video disc
television, ensure that all elements are switched off.
Control Panel (depending on the model) ☛ Please be sure to match the colour coded input terminals player, or video game device.
and cable jacks.
➢ The product colour and shape may vary depending on the ➢ When both the front (or side) AV and rear connectors are
Connecting to an Aerial or Cable Television Network connected to external equipment, the front (or side) AV
model. receives priority.
Connect the aerial or network input cable to the 1 (75 Ω
coaxial socket).
Front (or Side) Panel To view television channels correctly, a signal must be
received by the set from one of the sources: an outdoor aerial,
cable television network, or satellite network.
If you are using an indoor aerial, you may need to adjust it
when tuning your television until you obtain a picture that is
both sharp and clear.

1 On-screen menu display Connecting to the RCA Output

2 Volume adjustment The RCA2 connectors are used for equipment, such as a
3 Channel selection recording VCR or audio system.
4 Remote control sensor
5 Standby indicator Connecting to the RCA Input
6 Power on/off The RCA3 connectors are used for equipment, such as a
VCR, DVD, decoder, satellite receiver, video game device, or
 You can use the 3 buttons to switch the TV on when it is video disc player. (When using the mono equipment, connect
in standby mode depending on the model. to the AUDIO-L input connector.)
 The 2 and 3 buttons also have the same function as the The RCA4 connectors are used for equipment such as a
◄/►/▲/▼ buttons on the remote control. DVD with component output.
 If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.

English - 1 AA68-03905W-00

AA68-03905W_Eng.indd 1 2007-08-09 ｿﾀﾈﾄ 1:20:00

 Remote Control (depending on the model) Switching the Television On and Off
➢ Operation of remote control may be affected by bright 4 / # P /P The mains lead is attached to the rear of the television
artificial light near to the TV. Used to increase or Used to display the
1 Plug the mains lead into an appropriate socket.
➢ This is a special remote control for the visually impaired, decrease the volume. next or previous stored
➢ The main voltage is indicated on the rear of the
and has Braille points on the POWER, Channel and 5 MENU channel.
Volume buttons. television and the frequency is 50 or 60Hz.
Used to display the $ EXIT
on-screen menu or Used to exit from any 2 Press the “ I ” button (On/Off) on the front (or side) of the
return to the previous display or return to television.
menu. normal viewing.
3 Press the POWER button on the remote control to switch
6 ▲/▼/◄/► % MUTE the television on. The programme that you were watching
Used to control the Used to switch the 2 2 last is re-selected automatically. If you have not yet stored
cursor in the menu. sound off temporarily. any channels, no clear picture appears. Refer to “Channel
To turn the sound back 1 1
7 S.MENU (option) - Auto Store” on page 3 or “Channel - Manual Store” on
Used to display the on, press the MUTE, page 4.
, or button.
sound menu. ➢ If the television is initially powered on, several basic
8 TURBO (option) ^ ENTER customer settings proceed automatically.
Used to select the turbo While using the Refer to “Setup - Plug & Play” on page 3.
sound option. on-screen menus, press
4 To switch the television off, press the “ I ” button (On/Off)
the ENTER button to
9 DUAL I-II (option) on the front (or side) of the television.
activate (or change) a
Used to select the particular item.
sound mode.
& S.MODE (option)
0 SOURCE Used to select the
Used to display all of sound effect.
the available video
sources. * P.MODE
Used to select the
Placing the Television in Standby Mode
! INFO picture effect.
Used to view the The television can be placed in standby mode, in order to
channel information ( TV reduce power consumption and wear of the cathode ray
and setting status you Used to return to the tube. Standby mode can be useful when you wish to interrupt
selected. TV mode when it is in viewing temporarily (during a meal, for example).
external input mode.
@ PRE-CH 1 Press the POWER button on the remote control while
Used to switch ) SLEEP
viewing.
repeatedly between Used to select a
The television is in standby mode.
the last two channels preset time interval for
displayed. automatic turn off. 2 To switch the television back on, simply press it again.
➢ You can also switch on by pressing the TV,
P / P , or numeric button.

Installing Batteries ☛ Do not leave the television in standby mode for long
periods of time (when you are away on holiday, for
Remove the cover. Install two AAA size example). Turn the television off by pressing the “ I ”
1 POWER 3 -/-- batteries, then replace the cover. button (On/Off) on the front (or side) of the television. It is
Used to switch the TV Used to select a When the remote control does not operate best to unplug the set from the mains and aerial.
on and off. channel numbered normally, check that the “+” and “–” ends of
ten or over. Press this the batteries are inserted correctly or the
2 Numeric buttons
Used to select channels button, then “--” symbol batteries are drained.
directly. is displayed. Enter
the two-digit channel
➢ Do not mix battery types, i.e. alkaline and manganese.

number.

English - 2

AA68-03905W_Eng.indd 2 2007-08-09 ｿﾀﾈﾄ 1:20:04

 Viewing the Menus Input - Source List
1 Press the MENU button. 3 To search the channels, Plug & Play You can switch between viewing TV Source List

The main menu is displayed on the screen. Its left side press the ENTER button. Auto Store signal from connected equipment, TV
AV
has five icons: Input, Picture, Sound, Channel, and To stop the search, press the such as a VCR, DVD, set-top box, Component
Setup. ENTER button. and the TV source (broadcast or
Start
When the channel searching cable).
2 Press the ▲ or ▼ button to select one of the icons. has finished, the Clock Set
Press the ENTER button to access the icon’s sub-menu. menu is displayed.
Enter Skip
➢ You can change the required
Move Enter Return
Plug & Play external source simply by
3 Press the ▲ or ▼ button to move to items in the menu. Auto Store pressing the SOURCE button
4 Press the ◄ or ► button to
Press the ENTER button to enter items in the menu. P 1 102MHz on the remote control. It might take a short period of time
move to the hour or minute. 7 %
for pictures to be switched. To return to the TV mode,
4 Press the ▲/▼/◄/► button to change the selected items. Set the hour or minute by Stop press the TV button on the remote control.
Press the MENU button to return to the previous menu. pressing the ▲ or ▼ button.
Enter Skip

5 Press the EXIT button to exit from the menu. 5 When you have finished, Plug & Play
press the MENU button. Clock Set 01:-- am
The Enjoy your watching. Move Enter
is displayed, and then the Adjust Skip
channel which has been
stored will be activated. Enjoy your watching.
OK

Setup - Plug & Play (depending on the model)

When the television is initially powered on, several basic
Re-setting the Plug & Play TV Setup Channel - Auto Store
Plug & Play ►
customer settings proceed automatically and subsequently. Method: Language : English ►
The following settings are available. Time ► You can scan for the frequency ranges available to you (and
MENU  ▲/▼ (Setup)  Child Lock ► availability depends on your country). Automatically allocated
ENTER  ▲/▼ (Plug & Play) Blue Screen : Off ►
1 If the television is in standby Plug & Play
programme numbers may not correspond to actual or desired
mode, press the POWER  ENTER programme numbers. However you can sort numbers
Start Plug & Play
button on the remote control. Move Enter Return manually and clear any channels you do not wish to watch.
OK
The message Start Plug & Enter Return
Play is displayed. Channels are sorted and stored Search
To start Plug & Play, press the Plug & Play in the order which reflects their P 1 102MHz
7 %
ENTER button. Language position in the frequency range
The Language menu is English (with lowest first and highest Stop
displayed. Français last). The programme originally Enter Return

➢ The Language menu will Indonesia selected is then displayed.

Melayu
automatically appear after ➢ To stop the search before it has finished, press the ENTER
several seconds, even if button.
Türkçe
the ENTER button is not Move Enter Skip
When finished, the Sort menu is displayed. To sort the stored
pressed.
channels into the desired numerical order, refer to “Channel -
2 Select the appropriated Plug & Play Sort” on page 4.
language by pressing the Check antenna input. To exit without sorting, press the EXIT button.
▲ or ▼ button. Press the OK
ENTER button. Enter Skip
The Check antenna input. is
displayed.
➢ If any language is not selected, the language menu
will disappear about 30 seconds later.

continued...

English - 3

AA68-03905W_Eng.indd 3 2007-08-09 ｿﾀﾈﾄ 1:20:08

 Channel - Sort Channel - Add/Delete Setup - Time
This operation allows you to TV Sort You can exclude channels you TV Add/Delete
 Clock TV Time

change the programme numbers From : P 1 have chosen from the channels ▲ More Clock - - : - - am
To : P-- P 1 : Added You can set the television On Timer - - : - - am Off
of stored channels. Store : ? you scanned. When you scan P 2 : Added clock so that the current time Off Timer - - : - - am Off
This operation may be necessary through the stored channels, P 3 : Added
is displayed when pressing
P 4 : Added
after using auto store. those you have chosen to skip are P 5 : Added the INFO button on the
not displayed. All of the channels ▼ More remote control. You must also
Move Adjust Return that you did not specifically Move Enter Return
set the time if you wish to use Move Enter Return

 From : Channel number to be choose to skip are displayed the automatic on or off timers.
changed. during scanning. ➢ When pressing the “ I ” button (On/Off) on the front
 To : New channel number to be identified. (or side) of the television, the clock setting will be
 Store : Confirmation the exchange of channel numbers. Method: reset.
ENTER  ▲/▼  ENTER : Select Added or Deleted.
 On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛ You must set the clock first.
☛ Auto Power Off
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
Channel - Manual Store Channel - Fine Tune “On” mode and prevents overheating, which may occur if a
TV is on for too long.
You can store channels, including TV Manual Store If the reception is clear, you do Fine Tune

those received via cable networks. Programme : P 3 not have to fine-tune the channel, P 1 0
Colour System : AUTO ►
When storing channels manually, Sound System : BG ► as this is done automatically
Reset
you can choose: Search : 46MHz during the search and store
Store : ?
– Whether or not to store each of operation. If however the signal is Move Save
Adjust Return
the channels found weak or distorted, you may have
– The programme number of Move Adjust Return to fine-tune the channel manually.
each stored channel which you
wish to identify Method:

 Programme (Programme number to be assigned to a

◄/► : You can obtain a sharp and clear picture and good
sound quality.
Sleep Timer
channel) ▲/▼  ENTER : You can reset the setting.
 Colour System : AUTO / PAL / SECAM / NTSC4.43 / MENU : You can memorise adjusted picture or sound. You can select a time period of
NTSC3.58 between 30 and 180 minutes
 Sound System : BG / DK / I / M after which the television
 Search (When you do not know the channel numbers) automatically switches to
The tuner scans the frequency range until the first channel standby mode.
or the channel that you selected is received on the screen. You can select these options 30 Min.
 Store (When you store the channel and associated simply by pressing the SLEEP
programme number) button on the remote control.
If the sleep timer is not yet set, Off is displayed. If it is already
➢ If there is no sound or abnormal sound, re-select the set, the remaining time before which the television switches to
sound standard required. standby mode is displayed.

English - 4

AA68-03905W_Eng.indd 4 2007-08-09 ｿﾀﾈﾄ 1:20:09

 Setup - Child Lock Picture - Mode Sound - (depending on the model)
This feature allows you to prevent TV Child Lock
 Mode : Dynamic / Standard TV Mode
Mode / Adjust / Auto Volume / Turbo Sound
Child Lock : On ► Mode : Dynamic ►
unauthorized users, such as Programme : P 1
/ Movie / Custom Contrast : 100
children, from watching unsuitable Lock : ? You can select the type Brightness : 50  Mode : Standard / Music / TV Sound

programmes by muting out video of picture which best

Sharpness :
Colour :
75
50
Movie / Speech / Custom Mode : Standard ►
Adjust ►
and audio. Child Lock cannot corresponds to your viewing Tint : G 50 R 50 You can select the type of Auto Volume : Off ►
Colour Tone : Cool1 ►
be released using front (or side) requirements. Reset ►
special sound effect to be Turbo Sound : Off ►
used when watching a given
panel buttons. Only remote Move Enter Return
➢ You can select these Move Enter Return
broadcast.
control can release the Child Lock options simply by
setting, so keep the remote control away from children. pressing the P.MODE button on the remote control. ➢ You can select these Move Enter Exit
options simply by
 Child Lock : On/Off  Contrast / Brightness / Sharpness / Colour / pressing the S.MODE button on the remote control.
If you want to unlock a channel, set to Off. Tint (NTSC only)
 Programme : Channel number to be locked. The television has several settings which allow you to  Adjust : Bass / Treble / Balance
 Lock : When press the ENTER button, the Locked is control the picture quality. The television has several settings which allow you to
displayed. control the sound quality.
 Colour Tone : Cool2 / Cool1 / Normal / Warm1 / Warm2 ➢ If you make any changes to these settings, the sound
mode is automatically switched to Custom.
➢ If any channel is locked, you can not access to the  Reset
Channel and Child Lock menu by using the control You can return to the factory defaults.  Auto Volume
buttons on the TV panel (the Not available is displayed The reset function is set for each mode Each broadcasting station has its own signal conditions,
in the Child Lock menu). You can accessby using the (Dynamic, Standard, Movie, or Custom). and so it is not easy to adjust the volume every time the
remote control only. channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is
low.
 Turbo Sound
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
Picture - Digital NR / DNIe Jr music, movie, or other channels.
Setup - Language / Blue Screen (depending on the model) ➢ You can change the options simply by pressing the
TURBO button on the remote control.

 Language TV Setup  Digital NR TV Picture

It is variable depending on
Plug & Play ► If the signal received by the Mode : Dynamic ►
Language : English ► Digital NR : Off ►
the model. When you start Time ►
television is weak, you can DNIe Jr : Off ►
using the television for the Child Lock ► activate this feature to reduce
Blue Screen : Off ►
first time, you must select the any static and ghosting that
language which will be used may appear on the screen.
Move Enter Exit Move Enter Exit
for displaying menus and  DNIe Jr
indications. This feature bring you more detailed image with detail
enhancement, contrast enhancement and white
 Blue Screen enhancement. New image compensation algorithm gives
If no signal is being received or the signal is very weak, brighter, clearer, much detailed image to you.
a blue screen automatically replaces the noisy picture DNIe Jr technology will fit every signals into your eyes.
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.

English - 5

AA68-03905W_Eng.indd 5 2007-08-09 ｿﾀﾈﾄ 1:20:09

 Teletext Feature (depending on the model) Troubleshooting
Most television stations provide written information services 1 (hold) Before contacting the Samsung after-sales service, perform
via teletext. The index page of the teletext service gives you Used to hold the display on a given page if the selected the following simple checks. If you cannot solve the problem
information on how to use the service. In addition, you can page is linked with several secondary pages which follow using the instructions below, note the model and serial number
select various options to suit your requirements by using the on automatically. To resume, press it again. of the television and contact your local dealer.
remote control buttons. 2 (index)
No sound or picture
☛ For teletext information to be displayed correctly, channel Used to display the index (contents) page at any time
reception must be stable. Otherwise, information may be while you are viewing teletext.  Check that the mains lead has been connected to a wall
missing or some pages may not be displayed. socket.
3 (sub-page)
Used to display the available sub-page.  Check that you have pressed the “ I ” button (On/Off) and
the POWER button.
4 (size)  Check the picture contrast and brightness settings.
Press to display the double-size letters in the upper half of  Check the volume.
the screen. For lower half of the screen, press it again. To
display normal screen, press it once again. Normal picture but no sound
5 (teletext on/mix)  Check the volume.
Press to activate teletext mode after selecting the channel  Check whether the volume MUTE button on the remote
providing the teletext service. Press it again to overlap the control has been pressed.
teletext with the current broadcasting screen.
No picture or black and white picture
6 (mode)
Press to select the teletext mode (LIST/FLOF).  Adjust the colour settings.
If you press it in the LIST mode, it switches into the List  Check that the broadcast system selected is correct.
save mode. In the List save mode, you can save teletext
page into list using the (store) button. Sound and picture interference
7 (reveal)  Try to identify the electrical appliance that is affecting the
Used to display the hidden text (answers to quiz games, television, then move it further away.
for example). To display normal screen, press it again.  Plug the television into a different mains socket.
8 (page up) Blurred or snowy picture, distorted sound
Used to display the next teletext page.
 Check the direction, location and connections of your
9 (page down) aerial.
Used to display the previous teletext page. This interference often occurs due to the use of an indoor
0 (cancel) aerial.
Used to display the broadcast when searching for a page.
Remote control malfunctions
! Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting  Replace the remote control batteries.
company, the different topics covered on a teletext page  Clean the upper edge of the remote control (transmission
are colour-coded and can be selected by pressing the window).
coloured buttons. Press one of them corresponding to  Check that the “+” and “–” ends of the batteries are
the required. The page is displayed with other coloured inserted correctly.
information that can be selected in the same way. To  Check that the batteries are drained.
display the previous or next page, press the corresponding
coloured button.
@ (store)
Used to store the teletext pages.

English - 6

AA68-03905W_Eng.indd 6 2007-08-09 ｿﾀﾈﾄ 1:20:11

 OSD Map ✽ : It is variable depending on the model. Important Warranty Information
Regarding Television Format Viewing
Input – Source List ✽ – TV / AV / Component
Standard screen format televisions (4:3, the aspect ratio of the
Picture – Mode – Mode – Dynamic / Standard / Movie / Custom screen width to height) are primarily designed to view standard
Contrast format full-motion video. The images displayed on them should
Brightness primarily be in the standard 4:3 ratio format and constantly
moving. Displaying stationary graphics and images on screen,
Sharpness such as the dark top and bottom letterbox bars (wide screen
Colour pictures), should be limited to no more than 15% of the total
Tint (NTSC only) television viewing per week.
Colour Tone – Cool2 / Cool1 / Normal / Warm1 / Warm2
Reset Wide screen format televisions (16:9, the aspect ratio of
the screen width to height) are primarily designed to view
– Digital NR ✽ – Off / On
wide screen format full-motion video. The images displayed
– DNIe Jr ✽ – Off / On on them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
Sound – Mode ✽ – Standard / Music / Movie / Speech / Custom feature, and constantly moving. Displaying stationary graphics
– Adjust ✽ – Bass / Treble / Balance and images on screen, such as the dark side-bars on non-
– Auto Volume ✽ – Off / On expanded standard format television video and programming,
should be limited to no more than 15% of the total television
– Turbo Sound ✽ – Off / On viewing per week.

Channel – Auto Store Additionally, viewing other stationary images and text such as
– Manual Store – Programme stock market reports, video game displays, station logos, web
– Colour System ✽ – AUTO / PAL / SECAM / NTSC4.43 / NTSC3.58 sites or computer graphics and patterns, should be limited as
– Sound System ✽ – BG / DK / I / M described above for all televisions. Displaying any stationary
images that exceed the above guidelines can cause
– Search uneven aging of picture tubes (CRTs) that leave subtle,
– Store but permanent burned-in ghost images in the television
– Add/Delete picture. To avoid this, vary the programming and images,
– Fine Tune and primarily display full screen moving images, not
– Sort stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the
different formats as a full screen picture.
Setup – Plug & Play ✽
– Language ✽ Be careful in the selection and duration of television formats
– Time – Clock used for viewing. Uneven CRT aging as a result of format
– On Timer selection and use, as well as other burned-in images, is not
– Off Timer covered by your Samsung limited warranty.
– Child Lock
– Blue Screen – Off / On

English - 7

AA68-03905W_Eng.indd 7 2007-08-09 ｿﾀﾈﾄ 1:20:15

 This page is intentionally
left blank.

AA68-03905W_Eng.indd 8 2007-08-09 ｿﾀﾈﾄ 1:20:15