Scribd
Upload
131 views1 page

.204 DIA Hole Thru .375 Roll Inside Edges: Umpco

This document provides specifications for loop type bonding clamps made of various materials including steel, stainless steel, and aluminum alloys. The clamps come in different dash numbers corresponding to inside diameters ranging from 1/8" to 6". The document includes dimensions, material specifications, part numbering conventions, production notes, and a reference to request certified drawings from the manufacturer for actual specifications.

Uploaded by

Fred
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
131 views1 page

.204 DIA Hole Thru .375 Roll Inside Edges: Umpco

This document provides specifications for loop type bonding clamps made of various materials including steel, stainless steel, and aluminum alloys. The clamps come in different dash numbers corresponding to inside diameters ranging from 1/8" to 6". The document includes dimensions, material specifications, part numbering conventions, production notes, and a reference to request certified drawings from the manufacturer for actual specifications.

Uploaded by

Fred
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

ROLL INSIDE EDGES

.204 DIA
HOLE THRU

.375

.188 RADIUS

.031

.031 RADIUS

DASH NO Size Range "E"

-2 THRU -5 1/8" thru 5/16" D/2 + .250


.125 GAP -6 THRU -15 3/8" thru 15/16" D/2 + .281

-16 THRU -96 1" thru 6" D/2 + .312


 “D”

“E” .188

MATERIALS:

- 1010 LOW CARBON STEEL PER ASTM A109.


FINISH: CADMIUM PLATE PER QQ-P-416 TYPE II, CLASS 2

C 302 STAINLESS STEEL PER MIL-S-5059 OR 321 STAINLESS STEEL PER AMS 5510.
FINISH: PASSIVATE PER AMS 2700.

D 2024 ALUMINUM CLAD PER QQ-A-250/5.


FINISH: HEAT TREAT TO CONDITION T42 PER AMS-H-6088.

DC 2024 ALUMINUM CLAD PER QQ-A-250/5.


FINISH: HEAT TREAT TO CONDITION T42 PER AMS-H-6088 AND CHEMICAL TREAT PER MIL-C-5541, CLASS 3 COLOR:
GOLD.

EXAMPLE OF PART CALLOUT:

AN735 DC 10

DASH NO. IN 1/16” INCREMENTS


METAL AND FINISH CODE
BASIC PART NO.

EXAMPLES OF PART NUMERS:


AN735-2 = STEEL CLAMP, .125 INSIDE DIAMETER
AN735D2 = ALUMINUM ALLOY CLAMP, .125 INSIDE DIAMETER.
AN735DC2 = ALUMINUM ALLOY CLAMP WITH CHEMICAL FILM, .125 INSIDE DIAMETER.
AN735C2 = CRES, STEEL CLAMP, .125 INSIDE DIAMETER.

NOTES: ALUMINUM ALLOY CLAMPS MUST BE FORMED WITHIN ONE HOUR OF HEAT TREATMENT.

CLAMPS SHALL CHECK TO DIMENSIONS WITH ENDS HELD IN POSITION SHOWN.


BANDS SHALL HAVE ALL BURRS, SHARP EDGES AND SCALE REMOVED.

THIS CATALOG PAGE IS FOR REFERENCE ONLY. REQUEST A UMPCO, INC


CERTIFIED UMPCO DRAWING FOR ACTUAL SPECIFICATIONS. ANY
CONFLICT BETWEEN THIS DOCUMENT AND THE CERTIFIED CAGE CODE No. 18076
REV AS7351
DRAWING, THE CERTIFIED DRAWING WILL TAKE PRESIDENCE. IF
THE DOCUMENT IS CONTROLLED BY ANY OTHER SOURCE THAN A
UMPCO, THE CERTIFIED DRAWING MUST BE PURCHASED PART NUMBER
THROUGH THAT ORGANIZATION. CLAMP, LOOP TYPE BONDING

7100 LAMPSON AVE * PO BOX 5158 * GARDEN GROVE, CA 92846-5158 SALES: (714) 897-3531 * BUS: (714) 897-3536 * FAX: (714) 897-2611

You might also like