Scribd
Upload
139 views2 pages

Neonatal Warming Lamp Guide

The ANTARES Warming Lamp is an overhead fixture designed to treat newborns suffering from hypothermia. It contains a 350W radiant heater and halogen light controlled by a microprocessor. The heater can operate manually, where the user sets the heat level, or automatically to maintain the baby's skin temperature between 23-38°C. Additional features include a pre-heating mode and height adjustment. The lamp weighs 19kg and has a small footprint of 0.4m2.

Uploaded by

Steven Brown
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
139 views2 pages

Neonatal Warming Lamp Guide

The ANTARES Warming Lamp is an overhead fixture designed to treat newborns suffering from hypothermia. It contains a 350W radiant heater and halogen light controlled by a microprocessor. The heater can operate manually, where the user sets the heat level, or automatically to maintain the baby's skin temperature between 23-38°C. Additional features include a pre-heating mode and height adjustment. The lamp weighs 19kg and has a small footprint of 0.4m2.

Uploaded by

Steven Brown
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

ANTARES

Warming lamp
Antares
The ANTARES Warming Lamp is an overhead fix- in contact with the baby.
ture designed for the treatment of newborns suf- To complete those functions already present, Ma-
fering from hypothermia in beds, neonatal nual and Automatic Mode, there is also a Pre-hea-
treatment tables or even changing units. ting function which provides for the supply of
The apparatus is equipped with a radiant heater heating to be equal to 30% of the maximum hea-
and a halogen lamp illumination system both ma- ting output without any safety alarm coming on
naged by an electronic micro-processor control for use during the transitional treatment phase of
unit. The Heating System consists of a 350W ra- the patient until the system has come up to nor-
diant quartz tube giving off infrared emissions mal operating condition. The illumination system
and can be used in either Manual or Automatic is equipped with four halogen lamps each with a
Modes. The Manual Mode requires the operator power of 20 W which give a supply of white light
to set the heating quantity. Safety features in this capable of providing optimum visibility of the pa-
mode are insured by the sounding of an acoustic tient. The apparatus is equipped with a height
alarm. The Automatic Mode requires the desired adjustable chrome plated stainless steel stand
skin temperature of the patient to be selected and which has an internal device that facilitates and
set by the operator in a range between 23.0°C to balances the movements. The Y base is in
38.0°C, then a sophisticated micro-processor painted stainless steel mounted on 5 cm diameter
controlled servo-control unit automatically regu- wheels. The apparatus footprint is 0.4 m2 and its
lates the radiant heat level by using the informa- weighs approximately 19 kg.
tion arriving from the skin sensor probe, which is

Technical Specifications
Heating 1 x 350W Quartz heating tube
Temperature Control Automatic, Manual, Pre-heating
Set T Indicator, °C Digital, 23-38°C
Reading T Indicator from patient, °C Digital, 15-50°C
Illumination Lamp 4 Halogen, each 20W
Weight, kg (lb) 19 (42)
Overhead Fixture dimension, cm (in) 80x28x11 (31.5x11x 4.3)
Height of Overhead Fixture from 135-180 (53-71)
the ground, cm (in)
Power Supply 230Vac, 50-60 Hz
Power Consumption 525 W

Accessories and consumables


8084BCB rev.02

12423A70 12263A73 11730A73 565


Wall Support Halogen Lamps (4 pcs) Newborn Thermometric Sensor probe fixer Gel Reflect Ø38
Skin Probes Blue (6 (24 pcs)
pcs) 11814A73
Sensor probe fixer Gel Reflect Ø26
(24 pcs)

Quality System ISO 13485:2016


GINEVRI srl Tel.: +39 06 93 459 330 ISO 9001:2015
Via Cancelliera, 25/b Fax: +39 06 93 459 393
The specifications in this catalogue are indicative. The company
00041 Albano Laziale e-mail: export@[Link] GINEVRI srl reserves the right to make changes, without further no-
Rome - Italy [Link] tice, to the products described within this catalogue in order to im-
prove reliability, function or design.

You might also like