Scribd
Upload
869 views1 page

Jotun Hardtop AS Technical Data Sheet

This technical data sheet summarizes the properties of Hardtop AS, a two-component chemically curing aliphatic acrylic polyurethane coating. It has a high gloss finish with good chemical resistance and is recommended for use as a topcoat on marine vessel topsides, decks, superstructures and offshore/industrial structures. The product has approvals for low flame spread and meets the requirements of various international certifications schemes. It is available in different colors according to the manufacturer's color card and tinting system.

Uploaded by

TamerTamer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
869 views1 page

Jotun Hardtop AS Technical Data Sheet

This technical data sheet summarizes the properties of Hardtop AS, a two-component chemically curing aliphatic acrylic polyurethane coating. It has a high gloss finish with good chemical resistance and is recommended for use as a topcoat on marine vessel topsides, decks, superstructures and offshore/industrial structures. The product has approvals for low flame spread and meets the requirements of various international certifications schemes. It is available in different colors according to the manufacturer's color card and tinting system.

Uploaded by

TamerTamer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Technical Data Sheet

Approved 448;454;449 1,2 449 polyurethane ^(ValidationDate) 1

Hardtop AS

Product description
This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a high gloss finish with
excellent gloss retention. It has good chemical resistance. To be used as topcoat in atmospheric environments.

Typical use
Marine:
Recommended for topside, deck and superstructure.

Protective:
Recommended for offshore environments, refineries, power plants, bridges and buildings. Suitable for a wide
range of industrial structures. Used as a topcoat in pre-qualified NORSOK systems.
Other

Approvals and certificates


NORSOK System 1, Rev.5

When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5
and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with
IMO 2010 FTP Code Ch. 8

Consult your Jotun representative for details.


Additional certificates and approvals may be available on request.

Other variants available


Hardtop AS Alu
Refer to separate TDS for each variant.

Colours
according to colour card and Multicolor Industry tinting system (MCI)

Product data
Property Test/Standard Description
Solids by volume ISO 3233 50 ± 2 %
Gloss level (GU 60 °) ISO 2813 high gloss (85+)
Flash point ISO 3679 Method 1 26 °C
Density calculated 1,2 kg/l
VOC-US/Hong Kong US EPA method 24 (tested) 460 g/l
VOC-EU IED (2010/75/EU) (calculated) 458 g/l

The provided data is typical for factory produced products, subject to slight variation depending on colour.
All data is valid for mixed paint.
Gloss description: According to Jotun Performance Coatings' definition.

Date of issue: 7 November 2016 Page: 1/5

This Technical Data Sheet supersedes those previously issued.


The Technical Data Sheet (TDS) is recommended to be read in conjunction with the Safety Data Sheet (SDS) and the
Application Guide (AG) for this product. For your nearest local Jotun office, please visit our website at [Link]

You might also like