OVERHEAD LINE SPLICES

AUTOMATIC COPPER
COPPER

GL100

• Fastest method of splicing copper & copperweld conductor

• Inhibitor protected for optimum long term performance
• Individually bagged to seal out dirt before use
DB
*RBS = Rated Breaking Strength 1
Material: Shell – Drawn Copper Tube
Jaw – Bronze Alloy

Product Data & Conductor Size

CONDUCTOR RANGE APPROXIMATE CONDUCTOR O.D. DIMENSIONS INCHES (MM)
COPPER
CATALOG SOLID STRAND COPPERWELD MIN/MAX MIN/MAX
NUMBER ASTM-B258 ASTM-B8 STRAND INCHES MM A B
GL110 8 – – .12-.13 3.1-3.3 3.4 (86) .50 (13)
GL111+ 6 – 3 #12 .16-.17 4.0-4.4 3.4 (86) .50 (13)
GL112+ 4 – 8A .19-.20 4.9-5.2 3.5 (89) .56 (14)
GL113 3 4 (7) 6A .22-.23 5.7-5.9 3.5 (89) .56 (14)
GL114 2 3 (7), 4 (3) 5A .25-.26 6.3-6.6 4.4 (110) .75 (19)
GL1140 2 or 3 3 (7), 4 (7) – .22-.26 5.7-6.6 6.5 (160) .75 (19)
GL115+ 1 2 (7) 4A .28-.29 7.2-7.4 4.4 (110) .75 (19)
GL116 1/0 1 (7), 2 (3) 3A .32-.33 8.1-8.3 4.4 (110) .75 (19)
GL117+ 2/0 1/0 (7), 1 (3) 2A .36-.37 9.1-9.3 5.5 (140) .94 (24)
GL118+ 3/0 2/0 (7) – .40-.41 10.2-10.5 5.5 (140) .94 (24)
GL119+ 4/0 3/0 (7) – .45-.46 11.5-11.8 6.9 (180) 1.2 (30)
GL120+ – 4/0 (7,19) – .52-.53 13.2-13.4 6.9 (180) 1.2 (30)
GL121 – 250 (19,37) – .57-.58 14.4-14.7 6.9 (180) 1.2 (30)
GL123 – 300 (19,37) – .62-.63 15.8-16.1 8.6 (220) 1.5 (38)
GL125 – 350 (19) – .67-.68 17.0-17.2 8.6 (220) 1.5 (38)
GL127 – 400 (19,37) – .71-.73 18.1-18.5 8.6 (220) 1.5 (38)
GL128 – 450 (37) – .76-.77 19.4-19.6 8.6 (220) 1.5 (38)
GL130 – 500 (19,37) – .80-.81 20.4-20.7 8.6 (220) 1.5 (38)
+RUS Listed

Splices for Metric Conductor

APPROXIMATE CONDUCTOR O.D. DIMENSIONS INCHES (MM)
CATALOG
NUMBER CONDUCTOR MIN/MAX INCHES MIN/MAX MM A B
GL110M 6 mm2 .10-.14 2.6-3.5 4.20 (107) .51 (13)
GL111M 10 mm2 .14-.17 3.4-4.3 4.20 (107) .51 (13)
GL112M 16 mm2 Sol. .17-.20 4.2-5.2 4.36 (111) .55 (14)
GL113M 16 mm2 Str. .20-.22 5.0-5.8 4.36 (111) .55 (14)
GL114M 25 mm2 .22-.26 5.8-6.6 5.46 (139) .71 (18)
GL115M 35 mm2 .25-.30 6.5-7.6 5.46 (139) .71 (18)
GL117M 50 mm2 .31-.37 7.9-9.4 6.48 (165) .90 (23)
GL118M 70 mm2 .37-.43 9.4-10.9 6.48 (165) .90 (23)
GL119M 95 mm2 .44-.50 11.3-12.6 7.98 (203) 1.22 (31)
GL120M 120 mm2 .50-.56 12.6-14.2 7.98 (203) 1.22 (31)

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES
SUREFIT™ AUTOMATIC ALUMINUM
ALUMINUM

GLSF400

• ANSI C119.4, full tension, Class A connector (95% of conductor

breaking strength unless otherwise noted)
• Color coded funnel guides for easy identification
DB • Funnel guides deploy after full insertion
2 • Factory inhibitor protected
• Fastest method of splicing aluminum, aluminum alloy, and ACSR
conductor

Material: Shell – High Strength Aluminum Alloy

Jaws – Aluminum Alloy
Internal Components – Galvanized Steel and Thermoplastic

Product Data & Conductor Size

APPROXIMATE
CONDUCTOR SIZE CONDUCTOR O.D. DIMENSIONS INCHES (MM)
CATALOG ACSR AAAC AAC MIN/MAX. MIN./MAX. COLOR
NUMBER ASTM-B232 ASTM-B399 ASTM-B231 INCHES MM CODE A B
GLSF4042A 4-2 4-2 4-2 .220-.320 5.59-8.13 Red-Orange 12 (305) 1.0 (25)
GLSF4076A 1/0 - 2/0 1/0 - 2/0 1/0 - 2/0 .355-.470 9.02-11.94 Yellow-Gray 18 (460) 1.4 (36)
GLSF4098 3/0 - 4/0 3/0 - 4/0 3/0 - 4/0 .450-.595 11.43-15.11 Pink-Black 22 (560) 1.7 (43)
GLSF402A #2 #2 #2 .225 - .250 5.72 - 6.35 Orange 10 0.09
GLSF406A 1/0 1/0 1/0 .355 - .400 9.03 - 10.18 Yellow 13 1.1
GLSF410 266.8 (18/1) 312.8 *336.4 .603-.666 15.32-16.92 Brown 19 (480) 1.7 (43)
GLSF411 336.4 (18/1) 394.5 *397.5, **336.4 .659-.724 16.74-18.42 Green 20 (510) 1.8 (46)
GLSF412 397.5 (18/1) 465.4 *477 .720-.795 18.34-20.19 Blue 22 (560) 2.0 (51)
GLSF413 477 (18/1) 559.5 *556.5, 500 .780-.858 19.81-21.79 White 24 (610) 2.1 (54)
556.5 (18/1) - 600 (37 str),
GLSF414 652.4, 740.8 .879 - 1.041 22.33 - 26.44 26.76 2.5 Natural
795 (36/1) 795 (61 str)

*Includes compact conductor of same size - ASTM-B400

** Round only

Released Funnel Guide Fully Seated Funnel Guide

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES
SUREFIT™ AUTOMATIC -
ALUMINUM
CORROSIVE ENVIRONMENT ALUMINUM GLSF400 KR

• Designed SPECIFICALLY for high corrosive/problem environments

• Extensively tested, including Fault Current & Salt Spray.
• ANSI C119.4, full tension, Class A connector (95% of conductor
breaking strength unless otherwise noted)
DB
• Sequence Tested: Salt Fog per ASTM G85, Current Cycle per ANSI 3
C119.4, and Fault Current per IEEE837
• Color coded end funnel guides for easy identification
• Funnel guides deploy after full insertion
• Fastest method of splicing aluminum, aluminum alloy, and ACSR
conductor
• Special inhibitor blend for corrosive environments
• Stainless steel springs
• Stainless steel or plastic pilot cups
• Holes in shell & center stop for drainage & evaporation

Material: Shell – High Strength Aluminum Alloy

Jaws – Aluminum Alloy
Internal Components – Stainless Steel and Thermoplastic

Product Data & Conductor Size

APPROXIMATE
CONDUCTOR SIZE CONDUCTOR O.D. DIMENSIONS INCHES (MM)
CATALOG ACSR AAAC AAC MIN/MAX. MIN./MAX. COLOR
NUMBER ASTM-B232 ASTM-B399 ASTM-B231 INCHES MM CODE A B
GLSF4042AKR 4-2 4-2 4-2 .220-.320 5.59-8.13 Red-Orange 12 (305) 1.0 (25)

GLSF4076AKR 1/0 - 2/0 1/0 - 2/0 1/0 - 2/0 .355-.470 9.02-11.94 Yellow-Gray 18 (460) 1.4 (36)

GLSF4098KR 3/0 - 4/0 3/0 - 4/0 3/0 - 4/0 .450-.595 11.43-15.11 Pink-Black 22 (560) 1.7 (43)

GLSF402AKR #2 #2 #2 .225 - .250 5.72 - 6.35 Orange 10 0.09

GLSF406AKR 1/0 1/0 1/0 .355 - .400 9.03 - 10.18 Yellow 13 1.1

GLSF410KR 266.8 (18/1) 312.8 *336.4 .603-.666 15.32-16.92 Brown 19 (480) 1.7 (43)

GLSF411KR 336.4 (18/1) 394.5 *397.5, **336.4 .659-.724 16.74-18.42 Green 20 (510) 1.8 (46)

GLSF412KR 397.5 (18/1) 465.4 *477 .720-.795 18.34-20.19 Blue 22 (560) 2.0 (51)

GLSF413KR 477 (18/1) 559.5 *556.5, 500 .780-.858 19.81-21.79 White 24 (610) 2.1 (54)
556.5 (18/1) - 600 (37 str),
GLSF414KR 652.4, 740.8 .879 - 1.041 22.33 - 26.44 26.76 2.5 Natural
795 (36/1) 795 (61 str)

*Includes compact conductor of same size - ASTM-B400

Note: For conductors other than those listed, consult factory.

Released Funnel Guide Fully Seated Funnel Guide

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES
AUTOMATIC ALUMINUM
ALUMINUM

GL400

• ANSI C119.4, Class 1, full tension connector (95% of conductor

breaking strength unless otherwise noted)
• ANSI C119.4, full tension, Class A connector (95% of conductor
DB breaking strength unless otherwise noted)
4 • Color coded end funnel guides for easy identification
• Factory inhibitor protected
• Fastest method of splicing aluminum, aluminum alloy and ACSR
conductor

Material: Shell – High Strength Aluminum Alloy

Jaws – Aluminum Alloy

Product Data & Conductor Size

APPROXIMATE
CONDUCTOR SIZE CONDUCTOR O.D. DIMENSIONS INCHES (MM)
CATALOG ACSR AAAC AAC MIN/MAX. MIN./MAX. COLOR
NUMBER ASTM-B232 ASTM-B399 ASTM-B231 INCHES MM CODE A B
GL401 6-4 6-4 6-4 .184-.263 4.68-6.70 Blue 14 (360) 1.0 (25)

GL402A 4 4 4 .225-.250 5.72-6.35 Orange 9 (230) 0.9 (23)

GL404A 2 2 2 .280-.320 7.11-8.13 Red 12 (305) 1.0 (25)

GL4042A 4-2 4-2 4-2 .220-.320 5.59-8.13 Red- Orange 12 (305) 1.0 (25)

GL406A 1/0 1/0 1/0 .355-.400 9.02-10.16 Yellow 12 (305) 1.1 (28)

GL4076A 1/0-2/0 1/0-2/0 1/0-2/0 .355-.470 9.02-11.94 Yellow-Gray 18 (460) 1.4 (36)

GL407 2/0 2/0 2/0 .400-.470 10.16-11.94 Gray 18 (460) 1.4 (36)

GL408 3/0 3/0 3/0 .450-.530 11.43-13.46 Black 20 (510) 1.6 (41)

GL4098 3/0-4/0 3/0-4/0 3/0-4/0 .450-.595 11.43-15.11 Pink-Black 22 (560) 1.7 (43)

GL409A 4/0 4/0 4/0 .505-.595 12.83-15.11 Pink 17 (430) 1.6 (41)

GL1205A – – *4/0-266.8 .518-.595 13.16-15.11 Natural 9 (230) 1.2 (31)

*Includes compact conductor of same size - ASTM-B400

Note: For conductors other than those listed, consult factory.

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES
AUTOMATIC ALUMINUM
ALUMINUM
(MULTIPLE LAYER STRAND CONDUCTORS) GL400

• Automatic for larger multiple layer stranded conductor used in

primary distribution and transmission
• ANSI C119.4, full tension, Class A connector (95% of conductor
breaking strength unless otherwise noted)
DB
• Color coded end funnel guides for easy identification 5
• Factory inhibitor protected
• Fastest method of splicing aluminum, aluminum alloy and ACSR
conductor

Material: Shell – Seamless High Strength Aluminum Alloy

Jaws – High Strength Aluminum Alloy

Note: For conductors other than those listed, consult factory.

Product Data & Conductor Size

MULTIPLE LAYER STRAND CONDUCTORS-KCMIL SIZES
APPROXIMATE
CONDUCTOR SIZE CONDUCTOR O.D. DIMENSIONS INCHES (MM)
CATALOG ACSR AAAC AAC MIN/MAX. MIN./MAX. COLOR
NUMBER ASTM-B232 ASTM-B399 ASTM-B231 INCHES MM CODE A B
GL410 266.8 (18/1) 312.8 *336.4 .603-.666 15.32-16.92 Brown 19 (480) 1.7 (43)

GL411 336.4 (18/1) 394.5 *397.5,**336.4 .659-.724 16.74-18.39 Green 20 (510) 1.8 (46)

GL412 397.5 (18/1) 465.4 *477 .720-.795 18.29-20.19 Blue 22 (560) 2.0 (51)

GL413 477 (18/1) 559.5 *556.5, 500 .780-.858 19.81-21.79 White 24 (610) 2.1 (54)

GLT1316A 266.8 (26/7) – – – – Natural 36 (916) 2.2 (56)

GLT1317B 336.4 (26/7) – – – – Green 22 (560) 2.0 (51)

GLT1319A 477 (26/7) – – – – White 36 (916) 2.2 (56)

GL1333A+ 556.5 (18/1) Consult Fargo 636 .840-.920 21.34-23.37 Natural 15 (380) 2.0 (51)

GL1351A+ 556.5 (26/7) Consult Fargo 652.8 .927-.940 23.55-23.88 Natural 16 (410) 2.0 (51)

GL1355A+ Consult Fargo Consult Fargo 700, 715 .940-.976 23.88-24.80 Natural 16 (410) 2.0 (51)

GL1385A+ Consult Fargo Consult Fargo 795 .996-1.031 25.30-26.19 Natural 16 (410) 2.0 (51)

GL1441A+ Consult Fargo Consult Fargo 954 1.100-1.140 27.94-28.96 Red 16 (410) 2.0 (51)

*Includes compact conductor of same size - ASTM-B400

+Maximum design rating 10,000 lb./44.5 kN
**Round only

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES
AUTOMATIC - CORROSIVE ENVIRONMENT
ALUMINUM

GL*KR
ALUMINUM

• Designed SPECIFICALLY for high corrosive/problem environments

• Extensively tested, including Fault Current & Salt Spray.
• ANSI C119.4, Class 1, full tension connector (95% of conductor
DB breaking strength unless otherwise noted)
6 • ANSI C119.4 Class A, temperature rated connector
• Sequence Tested: Salt Fog per ASTM G85, Current Cycle per ANSI
C119.4, and Fault Current per IEEE837
Conductor Strands • Color coded end funnel guides for easy identification
• Fastest method of splicing aluminum, aluminum alloy, and ACSR
Corrosion Resistant Splice conductor
(KR) • Special inhibitor blend for corrosive environments
• Stainless springs
• Stainless or plastic pilot cups
• Holes in shell & center stop for drainage & evaporation
• Positive conductor insertion, look in the holes

Material: Shell – Seamless High Strength Aluminum Alloy

Jaws – High Strength Aluminum Alloy
Internal Components – Stainless Steel or Plastic

After 2000 hours of Salt Fog, 1000

hours of Heat Cycle, and Three
Rounds of Fault Current Testing

Product Data & Conductor Size

APPROXIMATE
CONDUCTOR O.D. DIMENSIONS,
CONDUCTOR SIZE†† INCHES (MM) INCHES (MM)
CATALOG COLOR
NUMBER ACSR AAAC AAC MIN MAX CODE A B
GL402AKR #4 #4 #4 0.225 (5.72) 0.250 (6.35) Orange 9 (230) 0.9 (23)

GL404AKR #2 #2 #2 0.280 (7.11) 0.320 (8.13) Red 12 (305) 1.0 (25)

GL4042AKR #4 - #2 #4 - #2 #4 - #2 0.220 (5.59) 0.320 (8.13) Red-Orange 12.8 (325) 1.0 (25)

GL406AKR 1/0 1/0 1/0 0.355 (9.02) 0.400 (10.16) Yellow 12 (305) 1.1 (28)

GL4076AKR 1/0 - 2/0 1/0 - 2/0 1/0 - 2/0 0.355 (9.02) 0.470 (11.94) Yellow-Gray 18 (460) 1.4 (36)

GL407KR 2/0 2/0 2/0 0.400 (10.16) 0.470 (11.94) Gray 18 (460) 1.4 (36)

GL408KR 3/0 3/0 3/0 0.450 (11.43) 0.530 (13.46) Black 20 (510) 1.6 (41)

GL409AKR 4/0 4/0 4/0 0.505 (12.83) 0.595 (15.11) Pink 17 (430) 1.6 (41)

GL410KR 266.8 (18/1) 312.8 336.4 0.603 (15.32) 0.666 (16.92) Brown 19 (480) 1.7 (43)

GL411KR 336.4 (18/1) 394.5 397.5, 336.4** 0.659 (16.74) 0.724 (18.39) Green 20 (510) 1.8 (46)

GL412KR 397.5 (18/1) 465.4 477 0.720 (18.29) 0.795 (20.19) Blue 22 (560) 2.0 (51)

GL413KR 477 (18/1) 559.5 556.5, 500 0.780 (19.81) 0.858 (21.79) White 24 (610) 2.1 (54)

GL1333AKR+ 556.5 (18/1) Consult Factory 636 0.840 (21.34) 0.920 (23.37) Natural 16.5 (420) 2.0 (51)

GL1351AKR+ 556.5 (27/7), 636 (18/1) Consult Factory 652.8 0.927 (23.55) 0.940 (23.88) Natural 16 (410) 2.0 (51)

GL1355AKR+ Consult Factory Consult Factory 700, 715 0.940 (23.88) 0.976 (24.79) Natural 16 (410) 2.0 (51)

GL1385AKR+ Consult Factory Consult Factory 795 0.996 (25.30) 1.031 (26.19) Natural 16 (410) 2.0 (51)

GL1441AKR+ 795 (26/7) Consult Factory 954 1.100 (27.94) 1.140 (28.96) Red 16 (410) 2.0 (51)

†† Includes compact conductor of same size.

+ Maximum design rating 10,000 lbs (44.5kN)
** Round Only
Note: For conductor other than those listed, consult factory.

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES
AUTOMATIC REDUCING
REDUCING

GL

• Allows easy splicing from one size conductor to another size conductor
• Allows utilities the option of not stocking old conductor that isn’t
used anymore
• Splice provides full strength of the weaker of the two conductors
DB
and a resistance lower than the equivalent conductor 7
• Same design philosophy and material as used in the copper and
aluminum automatic splices.
Copper
Material: Copper
Shell – Drawn Copper Tube
Jaws – Bronze Alloy
Aluminum
Shell – Aluminum Alloy
Jaws – Aluminum Alloy ACSR

Product Data & Conductor Size

COPPER REDUCING SPLICES
CONDUCTOR SIZE DIMENSIONS INCHES (MM)
LARGE END SMALL END
CATALOG
NUMBER SOLID STRAND SOLID STRAND A B
GL150 4 – 6 – 4 (100) .56 (14)
GL151 3 4 6 – 4 (100) .56 (14)
GL152 3 4 4 – 4 (100) .56 (14)
GL153 2 3 6 – 5 (130) .75 (19)
GL154 2 3 4 – 5 (130) .75 (19)
GL155 1 2 6 – 5 (130) .75 (19)
GL156 1 2 4 – 5 (130) .75 (19)
GL157 1 2 3 4 5 (130) .75 (19)
GL158 1 2 2 3 5 (130) .75 (19)
GL159 1/0 1 3 4 5 (130) .75 (19)
GL160 1/0 1 2 3 5 (130) .75 (19)
GL161 1/0 1 1 2 5 (130) .75 (19)
GL162 2/0 1/0 3 4 6 (150) .94 (24)
GL163 2/0 1/0 2 3 6 (150) .94 (24)
GL164 2/0 1/0 1 2 6 (150) .94 (24)
GL165 2/0 1/0 4 – 6 (150) .94 (24)
GL166 2/0 1/0 1/0 1 6 (150) .94 (24)
GL167 3/0 2/0 3 4 6 (150) .94 (24)
GL168 3/0 2/0 2 3 6 (150) .94 (24)
GL169 3/0 2/0 1 2 6 (150) .94 (24)
GL170 3/0 2/0 1/0 1 6 (150) .94 (24)
GL171 3/0 2/0 2/0 1/0 6 (150) .94 (24)
GL172 4/0 3/0 3/0 2/0 7.4 (190) 1.3 (33)
GL173 – 4/0 2/0 1/0 7.4 (190) 1.3 (33)
GL174 – 4/0 3/0 2/0 7.4 (190) 1.3 (33)
GL175 – 4/0 4/0 3/0 7.4 (190) 1.3 (33)
GL176 – 250 – 4/0 7.4 (190) 1.3 (33)
ACSR REDUCING SPLICES
GL406A4042A 1/0 4-2 12.1 (307) 1.2 (30)
GL412411 397.5 336.4 21 (530) 2.0 (51)

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES AUTOMATIC
BI-METAL (COPPER TO ALUMINUM)
BI-METAL

GL

• Provide a permanent electrical and mechanical connection of

copper to ACSR, aluminum or aluminum alloy conductors
• Factory loaded inhibitor to ensure long term corrosion free
DB performance
8 • Individually bagged to seal out dirt before use

Material: Shell – Aluminum Alloy

Jaws on side – Aluminum Alloy
Jaws on copper side – Plated Bronze Alloy

Product Data & Conductor Size

CONDUCTOR RANGE DIMENSIONS INCHES (MM)
COPPER END ALUMINUM END
CATALOG
NUMBER SOLID STRAND ACSR AAAC AAC A B
GL113195A 3 4 – 2/0 - 3/0 3/0 - 4/0 8.5 (220) 1.3 (33)

GL114185A 2 3 – 1/0 1/0 - 2/0 8.5 (220) 1.3 (33)

GL114195A 2 3 – 2/0 - 3/0 3/0 - 4/0 8.5 (220) 1.3 (33)

GL117018A 2/0 1/0 – 1/0 2/0 8.5 (220) 1.3 (33)

GL118195A 3/0 2/0 – 2/0 - 3/0 3/0 - 4/0 8.5 (220) 1.3 (33)

GL4042A11 6 – 2-4 2-4 2-4 9.4 (239) 1.0 (25)

GL4042A12 4 6 2-4 2-4 2-4 9.4 (239) 1.0 (25)

GL4042A13 3 4 2-4 2-4 2-4 9.4 (239) 1.0 (25)

GL40615 1 2 1/0 1/0 1/0 13 (331) 1.3 (33)

GL41118 3/0 2/0 336.4 (18/1) 394.5 397.5 15.5 (394) 1.8 (46)

GL41223 – 300 397.5 (18/1) 465.4 477 18 (450) 2.0 (51)

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 SPLICES
AUTOMATIC GUY WIRE
ALUMINUM

GLS

• For splicing applications with overhead or support guy wires

• Fargo GLS500x series automatic splices are designed for use on
High Strength (HS), Common (Com), Siemens-Martin (SM), Utilities
(Util) and Bell System strand
DB
• Fargo GLS504x series automatic splices are designed for use on 9
all guy wire types listed above, plus Extra High Strength (EHS) and
Alumoweld (AW)
• All GLS automatic splices will hold a minimum of 90% of the guy
wire rated breaking strength

Material: Shell – High Strength Aluminum Alloy

Jaws – Plated Steel

Product Data & Conductor Size

DIMENSIONS
TO BE USED WITH: INCHES (MM)
HS, COM,
CATALOG PRIMARY STRAND AW/ S-M, UTIL, RANGE RANGE
NUMBER APPLICATION EHS AWAC BELL (IN.) (MM) A B
6.4 0.9
GLS5000 1/4” HS, Com, S-M, Util, Bell l 0.240 - 0.253 6.11 - 6.44
(163) (23)
7.4 1.1
GLS5001 5/16” HS, Com, S-M, Util, Bell l 0.310 - 0.335 7.89 - 8.53
(189) (28)
9.00 1.3
GLS5002 3/8” HS, Com, S-M, Util, Bell l 0.360 - 0.405 9.16 - 10.31
(229) (33)
8.6 1.13
GLS5039 3/16 STR EHS, AW l l l 0.145 - .215 3.86 - 5.45
(219) (29)
1/4” EHS 8.3 1.13
GLS5040 l l l 0.215 - 0.270 5.46 - 6.86
7#12 (6M) AW (211) (28)
5/16” EHS 9.4 1.22
GLS5041 l l l 0.270 - 0.315 6.86 - 8.00
7#10 (10M), 7#11 (8M) AW (239) (31)
3/8” EHS
10.0 1.48
GLS5042 3#5, 7#8, 7#9, 12.5M, 14M, 16M AW l l l 0.325 - 0.392 8.26 - 9.96
(260) (38)
#4-2/5, #2-3/4, #1-5/2 AWAC
7/16” EHS
11.0 1.60
GLS5043 7#7 (20M), 18M AW l l l 0.392 - 0.458 9.96 - 11.63
(280) (41)
#2-2/5, #1-3/4, #1/0-5/2 AWAC
1/2” EHS, 25M AW,
10.8 1.70
GLS5044 #1-2/5, #1/0-3/4, #2/0-5/2 AWAC l l l 0.455 - 0.520 11.56 - 13.21
(273) (43)
#2/0-4/3 AWAC

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 ALUMINUM

GLS Reducing

• For splicing applications with overhead or support wires.

• Fargo GLS508x series automatic splices are designed for use on
High Strength (HS), Common (Com), Siemens-Martin (SM), Utilities
DB (Util), and Bell System Strand (Bell).
10 • All GLS automatic splices will hold a minimum of 90% of the guy
wire rated breaking strength.

Material: Shell – High Strength Aluminum Alloy

Jaws – Plated Steel

Product Data & Conductor Size

TO BE USED WITH:
HS,
COM,
S-M, SMALL END LARGE END
CATALOG SMALL END STRAND LARGE END STRAND AW/ UTIL, RANGE IN. RANGE IN.
NUMBER APPLICATION APPLICATION EHS AWAC BELL (MM) (MM)
3/16” HS, Com, S-M, 1/4” HS, Com, S-M, 0.145-0.215 0.215-0.270
GLS5086 l l l
Util, Bell Util, Bell (3.68-5.46) (5.46-6.86)

5/16” EHS
1/4” EHS 0.215-0.270 0.270-0.315
GLS5087 7#10, (10M), 7#11, l l l
7#12, (6M) AW (5.46-6.86) (6.86-8.00)
(8M) AW
3/8” EHS
5/16” EHS
3#5, 7#8, 7#9, 12.5M, 14M, 0.270-0.315 0.325-0.392
GLS5088 7#10, (10M), 7#11, l l l
16M AW #4-2/5, #2-3/4, (6.86-800) (8.26-9.96)
(8M) AW
#1-5/2 AWAC
3/8” EHS 7/16” EHS
3#5, 7#8, 7#9, 12.5M, 14M, 7#7 (20M), 18M AW 0.325-0.392 0.392-0.458
GLS5089 l l l
16M AW #4-2/5, #2-3/4, #2-2/5, #1-3/4, (8.26-9.96) (.96-11.63)
#1-5/2 AWAC #1/0-5/2 AWAC

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES: AL AND AL-CU
COMPRESSION
ALUMINUM
VERSATILE™ SPLICE MINIMUM TENSION VACS

• ANSI C119.4, minimum tension, Class 3 connector (5% of conductor

breaking strength)
• For use with either VERSA-CRIMP® or conventional compression tools
• For aluminum to aluminum, aluminum to copper and copper to
DB
L
copper (except as noted) conductor splicing D 11
• Color coded end plugs for easy die selection

Material: Body – Aluminum Alloy-Tin Plated

Factory Inhibited

AL9CU (90°C Rated)

LISTED
261L

Product Data & Conductor Size

ALUMINUM OR COPPER CONDUCTOR DIMENSIONS INCHES (MM)
VERSA-CRIMP APPROX.
CATALOG CONVENTIONAL VERSA-CRIMP TOOL WT. EACH I.D. INCHES
NUMBER ∆ RANGE SYSTEM RANGE TYPE L D LBS. (KG) (MM)
VACS8 #8 Str. Al/Cu #8 Str. Al/Cu 1-7/8 (47.6) 7/8 (22.2) .007 (.003) .166 (4.2)

VACS6 #6 Str. Al/Cu #6 Str. Al/Cu VC6350 1-7/8 (47.6) 7/8 (22.2) .012 (.005) .206 (5.2)

VACS4 #4 Str. Al/Cu #4 Str. Al/Cu 2-1/8 (54.0) 1 (25.4) .021 (.009) .252 (6.4)

VACS2 #2 Str. Al/Cu #6–#2 Str. Al/Cu 2-3/8 (60.3) 1-1/8 (28.6) .03 (.013) .312 (7.3)

VACS1 #1 Str. Al/Cu #4–#1 Str. Al/Cu 2-3/8 (60.3) 1-1/8 (28.6) .04 (.02) .350 (8.9)

VACS10 1/0 Str. Al/Cu #8-1/0 Str. Al/Cu 2-11/16 (68.3) 1-5/16 (33.3) .05 (.02) .393 (10)

VACS20 2/0 Str. Al/Cu #4-2/0 Str. Al/Cu VC6 2-11/16 (68.3) 1-5/16 (33.3) .06 (.03) .450 (11.4)

VACS30 3/0 Str. Al/Cu #4-3/0 Str. Al/Cu (ALL) 2-11/16 (68.3) 1-5/16 (33.3) .08 (.04) .502 (12.7)

VACS40 4/0 Str. Al/Cu #2-4/0 Str. Al/Cu 3-3/8 (85.7) 1-5/8 (41.3) .11 (.05) .562 (14.3)

VACS250 250 MCM Al/Cu 1/0-250 MCM Al/Cu 3-3/8 (85.7) 1-5/8 (41.3) .15 (.07) .605 (13.4)

VACS300 300 MCM Al/Cu 1/0-300 MCM Al/Cu 3-3/8 (85.7) 1-5/8 (41.3) .19 (.08) .660 (16.8)

VACS350 350 MCM Al/Cu 2/0-350 MCM Al/Cu 5 (127.0) 2-7/16 (62.0) .22 (.10) .711 (18.1)
VC63
VACS400 400 MCM Al/Cu 3/0-400 MCM Al/Cu 5 (127.0) 2-7/16 (62.0) .27 (.12) .758 (19.2)
VC6FT
VACS500 500 MCM Al/Cu 4/0-500 MCM Al/Cu 5 (127.0) 2-7/16 (62.0) .36 (.16) .843 (21.4)

350-600 MCM Al
VACS600* 600 MCM Al VC6FT 6 (152.4) 2-15/16 (74.6) .47 (.21) .923 (23.4)
350-500 MCM Cu
VC8
VACS750* 750 MCM Al 500-750 MCM Al 6 (152.4) 2-15/16 (74.6) .65 (.40) 1.028 (26.1)

VACS1000* 1000 MCM Al 750-1000 MCM Al VC8 6-3/8 (161.9) 3-1/8 (79.4) .97 (.44) 1.182 (30)

∆ Refer to pages DB-23 & DB-24 for recommended tool and die information.
* Not for copper to copper.
HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL,VACL,VHCL, VHCS and VCELC) are rated at 34.5kV. The other U.L. listed compres-
sion connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 2000 volts, however Anderson recommends these con-
nectors for application through 34.5 KV subject to the manufacturers’ limitations and recommendations for the insulation material. For further information, contact
factory.

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES: AL AND AL-CU
COMPRESSION VERSA-CRIMP® SPLICE
ALUMINUM

VCSE
MINIMUM TENSION – RANGE TAKING

• ANSI C119.4, minimum tension, Class 3 connector (5% of conductor

breaking strength)
L • For use with VERSA-CRIMP® tools only
DB • For aluminum to aluminum and aluminum to copper conductor
12 splicing. Not for copper to copper splicing
D • Aluminum alloy conductor recommendations include 5005, 6201
(AAAC) and ACAR of the same maximum diameter as a given
ACSR conductor shown below. In addition, compressed (compact)
conductor sizes within listed AAC range are recommended

Material: Body – Aluminum Alloy

Factory inhibited

Product Data & Conductor Size

VERSA-CRIMP DIMENSIONS INCHES (MM) APPROX.
CATALOG VERSA CRIMP SYSTEM TOOL WT. EACH
NUMBER CONDUCTOR RANGE TYPE L D LBS. (KG)
#10(7)-1/0 (19) AAC
2 21/32 .063
VCSE44 #8 (6/1)-1/0 (6/1) ACSR
(50.8) (16.7) (.028)
#10 Sol.-1/0(19) Cu
#8(7)-3/0 (19) AAC
VC6 3 1-7/16 .11
VCSE55 #6 (6/1)-2/0 (6/1) ACSR
(ALL) (76.2) (36.5) (.05)
#8 Sol.-3/0 (19) Cu
#4 (7)-266.8 (19) AAC
4 1-7/8 .18
VCSE66 #4 (6/1)-4/0 (6/1) ACSR
(101.6) (47.6) (.08)
#4 Sol.-250 (37) Cu
2/0 (7)-350 (37) AAC
5 2-3/8 .27
VCSE77 2/0 (6/1)-336.4 (18/1) ACSR
*VC6500 (127.0) (60.3) (.12)
2/0 (7)-350 (37) Cu
VC63
4/0 (7)-500 (37) AAC
VC6FT 5 2-3/8 .28
VCSE88 4/0 (6/1)-477 (18/1) ACSR
(127.0) (60.3) (.12)
4/0(7)-500(37) Cu
500 (19)-750 (61) AAC
VC6FT 6 2-7/8 .45
VCSE99 477(18/1)-636 (26/7) ACSR
VC8 (152.4) (73.0) (.20)
500 (37) Cu

*VC6500 for use with aluminum conductor only in range 350-500 MCM.

OVERHEAD AND SERVICE ENTRANCE

PLASTIC
LINE SPLICES COMPRESSION
SEC PLASTIC COVER
Snap on cover for minimum tension splice

Material: Black thermoplastic

APPROX.
CATALOG WT. EACH
NUMBER DESCRIPTION LBS. (KG)
SEC4 ** For use on any 5/8” OD splice up to 2” long .04 (.02)
SEC6 ** For use on any .840 OD splice up to 4” long .06 (.03)

**RUS Listed

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES: AL AND AL-CU
COMPRESSION
ALUMINUM
VERSAtile™ REDUCING SPLICE VAUS
MINIMUM TENSION
• ANSI C119.4, minimum tension, Class 3 connector (5% of conductor
breaking strength)
• For use with either VERSA-CRIMP® or conventional compression
2” ” 4” DB
tools—4 standard die sizes 16 8”
• For aluminum to aluminum or aluminum to copper conductor 15/ 1-7/ 13
splicing. Not for copper to copper connections. ”
16 8”
• Color coded end caps for quick conductor sizing thru 4/0 15/ 1-7/

Material: Aluminum Alloy

Factory Inhibited with Non-Petroleum Sealant
0 6
.65 5/8” DIE SIZE .90 .840” DIE SIZE

Product Data & Conductor Size

DIELESS VERSA-CRIMP: VC6 5/8” DIE SIZE: STD. TOOLS
INSIDE A/B APPROX.
DIAM. COLOR WT.
CATALOG VERSA CRIMP VC6 SERIES (INCHES) CONVENTIONAL DIE-TYPE STANDARD CODED EACH
NUMBER (ALL) TOOLING RANGES A/B ENDS CONDUCTOR RANGES DIE SETS ENDS LBS. (KG)
#8 Str.–#4 Sol. Al/Cu & #6 ACSR #6 Str.–#4 Sol. Al/Cu & #6 ACSR Blue .058
VAUS68** .233-.186
#8 Str. Al & #8 Str.– #6 Sol. Cu #8 Str. Al & #8 Str.–#6 Sol. Cu Green (.026)
VAUS66** #8 Str.–#4 Sol. Al/CU & #6 ACSR .233-.233 #6 Str.–#4 Sol. Al/Cu & #6 ACSR Blue .057 (.026)
#8 Str.–#2 Sol. Al/Cu & #6–#4 ACSR #4 Str.–#2 Sol. Al/Cu & #4 ACSR Orange .057
VAUS48** .281-.186
#8 Str. Al & #8 Str.–#6 Sol. Cu #8 Str. Al & #8 Str.–#6 Sol. Cu Green (.026)
#8 Str.–#2 Sol. Al/Cu & #6–#4 ACSR #4 Str.–#2 Sol. Al/Cu & #4 ACSR Orange .056
VAUS46** .281-.233
#8 Str.–#4 Sol. Al/Cu & #6 ACSR #6 Str.–#4 Sol. Al/Cu & #6 ACSR Blue (.025)
VAUS44** #8 Str.–#2 Sol. Al/Cu & #6–#4 ACSR .281-.281 #4 Str.–#2 Sol. Al/Cu & #4 ACSR Orange .048 (.022)

EEI-8A Burndy BG Index 243

#8–#1 Str. Al/Cu & #6–#2 ACSR #2–#1 Str. Al/Cu & #2 ACSR Red .053
VAUS18** .355-.186
#8 Str. Al & #8 Str.–#6 Sol. Cu #8 Str. Al & #8 Str.–#6 Sol. Cu Green (.024)

T&B/Blackburn TU52
#8–#1 Str. Al/Cu & #6–#2 ACSR #2–#1 Str. Al/Cu & #2 ACSR Kearney 5/8” Red .052
VAUS16** .355-.233
#8 Str.–#4 Sol. Al/Cu &#6 ACSR #6 Str.–#4 Sol. Al/Cu & #6 ACSR Blue (.024)
#8–#1 Str. Al/Cu & #6–ACSR #2–#1 Str. Al/Cu & #2 ACSR Red .051
VAUS14** 355-.281
#8 Str.–#2 Sol. Al/Cu & #6–#4 ACSR #4 Str.–#2 Sol. Al/Cu & #4 ACSR Orange (.023)
VAUS11** #8–#1 Str. Al/Cu & #6–#2 ACSR .355-.355 #2–#1 Str. Al/Cu & #2 ACSR Red .048 (.022)
#8–1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR Yellow .049
VAUS108** .421-.186
#8 Str. Al & #8 Str.–#6 Sol. Cu #8 Str. Al & #8 Str. –#6 Sol. Cu Green (.022)
#8–1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR Yellow .048
VAUS106** .421-.233
#8 Str.–#4 Sol. Al/Cu & #6 ACSR #6 Str.–#4 Sol. Al/Cu & #6 ACSR Blue (.022)
#8–1/0 Str. Al Cu/ASCR 1/0 Str. Al/Cu/ACSR Yellow .047
VAUS104** .421-.281
#8 Str.–#2 Sol. Al/Cu & #6–#4 ACSR #4 Str.–#2 Sol. Al/Cu & #4 ACSR Orange (.021)
#8–1/0 Str. Al/Cu/ASCR 1/0 Str. Al/Cu/ACSR Yellow .043
VAUS101** .421-.355
#8–#1 Str. Al/Cu & #6–#2 ACSR #2–#1 Str. Al/Cu & #2 ACSR Red (.020)
VAUS1010** #8–1/0 Str. Al/Cu/ASCR .421-.421 1/0 Str. Al/Cu/ACSR Yellow .039 (.018)
DIELESS VERSA-CRIMP: VC6 .840” DIE SIZE: STD. TOOLS
#4–1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR-2/0 Comp Yellow .240
VAUSH101** .421-.355
#6–#1 Str. AI/CU & #6–#2 ACSR #2–#1 Str. Al/Cu & #2 ACSR–#1–1/0 Comp. Red (.11)
EEI-IIA Burndy

#4–1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR–2/0 Comp. .240

K840/249

VAUSH1010** .421-.421 Yellow

#4–1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR–2/0 Comp. (.11)
#4–2.0 Str. Al/Cu/ACSR 2/0 Str. Al/Cu/ACSR–3/0 Comp Gray .213
VAUS206** .469-.233
#8 Str.–#4 Sol. Al/Cu & #6 ACSR #6 Str.–#4 Sol. Al/Cu & #6 ACSR Blue (.097)
#4–2/0 Str. Al/Cu/ACSR 2/0 Str. Al/Cu/ACSR-3/0 Comp. Gray .210
VAUS204** .469-.289
#8 Str.–#2 Sol. Al/Cu & #6–#4 ACSR #4 Str.–#2 Sol. Al/Cu & #4 ACSR Orange (.095)
Continued on next page.
**RUS Listed
ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017
 OVERHEAD LINE SPLICES:
AL AND AL-CU COMPRESSION 5”
/16
” 7-1
/2 ”
/16
”
3-9
VERSAtile™ REDUCING /16
”
2-7
/16
”
3-9
ALUMINUM
SPLICE MINIMUM TENSION 2-7

VAUS (CONTINUED) 7 50
1.18 1.3
1-1/8” Die Size 1-5/16” Die Size
DIELESS VERSA-CRIMP: VC6 .840” DIE SIZE: STD. TOOLS
INSIDE A/B APPROX.
DB DIAM. COLOR WT.
14 CATALOG VERSA CRIMP VC6 SERIES (INCHES) CONVENTIONAL DIE-TYPE STANDARD CODED EACH
NUMBER (ALL) TOOLING RANGES A/B ENDS CONDUCTOR RANGES DIE SETS ENDS LBS. (KG)
#4-2/0 Str. Al/Cu/ACSR 2/0 Str. Al/Cu/ACSR-3/0 Comp. Gray .203
VAUS201** .469-.355
#6-#1 Str. Al/Cu & #6-#2 ACSR #2-#1 Str. Al/Cu & #2 ACSR-#1-1/0 Comp. Red (.092)
#4-2/0 Str. Al/Cu/ACSR 2/0 Str. Al/Cu/ACSR-3/0 Comp. Gray .195
VAUS2010** .469-.429
#4-1/0 Str. Al/Cu/ACSR 1/0 Str. Al.Cu/ACSR-2/0 Comp. Yellow (.088)
VAUS2020** #4-2/0 Str. Al/Cu/ACSR .469-.469 2/0 Str. Al/Cu/ACSR-3/0 Comp. Gray .189 (.086)
#4-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-4/0 Comp. Black .201
VAUS304** .531-.281
#8 Str.-#2 Sol. Al/Cu & #6-#4 ACSR #4 Str.-#2 Sol. Al/Cu & #4 ACSR Orange (.091)
#4-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-4/0 Comp. Black .194
VAUS301** .531-.355
#6-#1 Str. Al/Cu & #6-#2 ACSR #2-#1 Str. Al/Cu & #2 ACSR-#1-1/0 Comp. Red (.088)
#4-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-4/0 Comp. Black .186
VAUS3010** .531-.421

Blackburn 840 B49EA Kearney: 840

#4-1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR-2/0 Comp. Yellow (.084)

EEI-11A Burndy K840 Index 249

#4-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-4/0 Comp. Black .180
VAUS3020** .531-.469
#4-2/0 Str. Al/Cu/ACSR 2/0 Str. Al/Cu/ACSR-3/0 Comp. Gray (.082)

T&B TX 76 76H
VAUS3030** #4-3/0 Str. Al/Cu/ACSR .531-.531 3/0 Str. Al/Cu/ACSR-4/0 Comp. Black .171 (.078)
#4 Sol. -250 Str. Al/Cu & #5-4/0 ACSR 4/0-250 Str. Al/Cu/ACSR-250-300 Comp. Pink .181
VAUS404** .595-.281
#8 Str.-#2 Sol. Al/Cu & #6-#4 ACSR #4 Str.-#2 Sol. Al/Cu & #4 ACSR Orange (.082)
#4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR 4/0-250 Str. Al/Cu 4/0 ACSR 250-300 Comp. Pink .184
VAUS401** .595-.355
#6-#1 Str. Al/Cu & #6-#2 ACSR #2-#1 Str. Al/Cu/ACSR-#1-1/0 Comp. Red (.083)
#4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR 4/0-250 Str. Al/Cu 4/0 ACSR-250-300 Comp. Pink .176
VAUS4010** .595-.421
#4-1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR-2/0 Comp. Yellow (.080)
#4 Sol.-250 Str. Al/Cu& #5-4/0 ACSR 4/0-250 Str. Al/Cu 4/0 ACSR 250-300 Comp. Pink .170
VAUS4020** .595-.469
#4-2/0 Str. Al/Cu/ACSR 2/0 Str. Al/Cu/ACSR-3/0 Comp. Gray (.077)
#4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR 4/0-250 Str. Al/Cu 4/0 ACSR-250-300 Comp. Pink .161
VAUS4030** .595-.531
#4-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-3/0 Comp. Black (.073)
VAUS4040** #4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR .595-.595 4/0-250 Str. Al/Cu 4/0 ACSR-250-300-Comp. Pink .151 (.068)
#1-350 Str. & #1-336.4 18/1 ACSR 300-350 Str. & 336.4 18/1 ACSR-350-400 Comp. None .200
VAUS34930** .704-.531
#4-3/0 Str. Al/Cu/ACSR 3/0 Str. Al/Cu/ACSR-4/0 Comp. Black (.10)
#1-350 Str. & #1-336.4 18/1 ACSR 300-350 Str. & 336.4 18/1 ACSR-350-400 Comp. None .200
VAUS34940** .704-.595
#4 Sol.-250 Str. Al/Cu & #5-4/0 ACSR 4/0-250 Str.-4/0 ACSR-250-300 Comp. Pink (.10)
VAUS349349** #1-350 Str. & #1-336.4 18/1 ACSR .704-.704 300-350 Str. & 336.4 18/1 ACSR 350-400 Comp. None .190 (.10)
DIELESS VERSA-CRIMP: VC6 1-1/8” DIE SIZE: STD. TOOLS
3/0-300 Str. Al/Cu 250-300 Str. Al/Cu & 300-350 Comp. .379
U32 ART Index 655 & 472

T&B 96 & 96H Blackburn:

VAUS300300**∆ .650-.650 None

705, 316 Kearney: 1 1/8

3/0 (6/1)-266.8 (18/1) ACSR 4/0 (6/1)-266.8 (18/1) ACSR (.172)

EEI-13A Burndy:

3/0-350 Str. Al/Cu 336.4-350 Str. Al/Cu & 350-400 Comp. .349
VAUS350350**∆ .718-.718 None
B80EA

3/0(6/1)-336.4 (18/1) ACSR 266.8 (6/1)-336.4(18/1) ACSR (.158)

4/0-400 Str. Al/Cu 336.4-400 Str. Al/Cu & 500 Comp. .313
VAUS400400**∆ .781-.781 None
4/0 (6/1)-397-(18/1) ACSR 336.4 (36/1)-397 (18/1) ACSR (.142)
4/0-500 Str. Al/Cu 450-500 Str. Al/Cu & 600 Comp. .275
VAUS500500**∆ .843-.843 None
4/0 (6/1)-477 (18/1) ACSR 397.5 (18/1)-477 (18/1) ACSR (.125)
DIELESS VERSA-CRIMP: VC6/VC8 1-5/16” DIE SIZE: STD. TOOLS
450-500 Str. & 600 Comp.
4/0-500 Str. .748
VAUS475475** .843-.843 397 (18/1) (24/7) (26/7) (30/7) ACSR None
EEI-14A Burndy: Index

4/0 (6/1)-477 (18/1) ACSR (.389)

317,327,719 Kearney:

Blackburn: B20AH

477 (36/1) (18/1) ACSR

1-5/16 T&B 106H

500-556.5 Str. & 650-700 Comp.

250-556.5 Str. .646
VAUS575575** .900-.900 477 (18/1) (24/7) (26/7) ACSR None
266.8(18/1)-556.5 18/1 ACSR (.307)
556 (36/1) (18/1) ACSR
600-700 Str. & 750-795 Comp.
350-700 Str. .748
VAUS675675** 1.000-1.000 477 (30/7) 556.5 (18/1) (24/7) (26/7) (30/7) ACSR None
336.4 (18/1)-605 26/7 ACSR (.389)
636 (18/1) (36/1) 605 (36/1) (24/7) (26/7) ACSR
∆ For VC6-350/VC6-500 Conductor range is limited to conventional tool/die wire range.
**RUS Listed
ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017
 OVERHEAD LINE SPLICES: AL/ACSR
COMPRESSION VERSA-CRIMP® SPLICE
ALUMINUM
PARTIAL TENSION VCSN
L
• ANSI C119.4, partial tension, Class 2 connector (40% of conductor
breaking strength)
• For use with VERSA-CRIMP® Type VC6 (all) tools only
• For Aluminum or ACSR messenger-neutrals of triplex service drop D DB
cables and loop jumper use 15

Material: Body – Aluminum Alloy

Factory Inhibited

Product Data & Conductor Size

DIMENSIONS
VERSA-CRIMP APPROX.
ALUMINUM CONDUCTOR RANGE INCHES (MM)
CATALOG TOOL WT. EACH
NUMBER MAIN TAP TYPE L D LBS. (KG)
#4 (7)-1/0 (19) AAC #4 (7)-1/0 (19) AAC VC6 3-9/16 1-3/4 .12
VCSN44
#6 (6/1)-1/0 (6/1) ACSR #6 (6/1) - 1/0 (6/1) ACSR (ALL) (90.5) (44.45) (.05)

OVERHEAD LINE SPLICES COMPRESSION

VERSAtile™ TRIPLEX NEUTRAL SPLICE ALUMINUM

PARTIAL TENSION VANS

• For use with VERSA-CRIMP® or conventional tools.

• Connectors have partial tension (40%) rating when used with
Aluminum and ACSR conductors.
• Connectors have minimum tension (5%) rating when used with L
copper conductors.
• Connectors are for splicing ACSR/Aluminum conductors to ACSR/
Aluminum or ACSR/Aluminum to copper. Not for copper to copper.
D
Material: Aluminum Alloy
Factory Inhibited with Non-Rubber Swelling
Inhibitor and Sealed With Color Coded Caps

Product Data & Conductor Size

ALUMINUM OR COPPER CONDUCTOR DIMENSIONS INCHES (MM)
VERSA-
CRIMP CONVEN- COLOR WT.
CATALOG VERSA-CRIMP SYSTEM TOOL CONVENTIONAL TIONAL CODED EACH
NUMBER CONDUCTOR RANGE TYPE WIRE RANGE TOOL-DIES END L D LBS. (KG)
#8 Str.-#4 Sol. Al/Cu #6 Str.-#4 Sol. Al/Cu EEI-8A 4-1/4 2-1/16 .123
VANS66 Blue
#6 ACSR #6 ACSR Burndy: (107.95) (52.39) (.055)
BG
#8 Str.-#2 Sol. Al/Cu #4-#2 Sol. Al/Cu 4-1/4 2-1/16 .115
VANS44 Index 243 Orange
#6-#4 ACSR #4 ACSR (107.95) (52.39) (.052)
OH-25
VC6
#8-#1 Str. Al/Cu #2-#1 Str. Al/Cu Kearney: 4-1/4 2-1/16 .093
VANS11 (ALL) Red
#6-#2 ACSR #2 ACSR 5/8 Nose (107.95) (52.39) (.044)
Somerset:
TU, 52 5 2-7/16 .097
VANS1010 #8-1/0 Str. Al/Cu/ACSR 1/0 Str. Al/Cu/ACSR Yellow
Blackburn: (127.0) (61.91) (.044)
5/8 Nose

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES: AAC AND ACSR
COMPRESSION VERSA-CRIMP® SPLICE
ALUMINUM

VCJSR
PARTIAL TENSION – RANGE TAKING

• For use with VERSA-CRIMP® tools only

• For aluminum, ACSR, compact, 5005, 6201 and ACAR partial
tension (40% tension rating) conductor jumper splicing
DB • Aluminum alloy conductor recommendations include 5005 and
16 ACAR having the same diameter as a given ACSR conductor shown
below. In addition, compressed (compact) conductor sizes within
the same decimal conductor range are recommended
• Use 800 series connectors only, if 6201 (AAAC) aluminum alloy
conductor is involved

Material: Body – Aluminum Alloy

Factory inhibited

L
D

Product Data & Conductor Size

VERSA- DIMENSIONS
CONDUCTOR RANGE – VERSA CRIMP TOOLS CRIMP INCHES (MM) APPROX.
CATALOG TOOL WT. EACH
NUMBER AAC ACSR TYPE L D LBS. (KG)
#6 (7), #4 (7), #3 (7), #6 (6/1), #4 (7/1), (6/1), 4-5/8 2-1/4 .13
VCJS36R
#2 (19, 7) #2 (7/1), (6/1) (117.5) (57.2) (.06)
#2 (19, 7), #1 (19, 7), 1/0 (19, 7), #2 (7/1, 6/1), #1 (6/1), 1/0 (6/1), VC6 6 2-15/16 .25
VCJS50R
2/0 (19, 7) 2/0 (6/1) (ALL) (152.4) (74.6) (.11)
1/0 (19, 7), 2/0 (19, 7), 3/0 (19, 7), 4/0 1/0 (6/1), 2/0 (6/1), 3/0 (6/1), 7-3/8 3-5/8 .45
VCJS61R
(19, 7) 4/0 (6/1) (187.3) (92.1) (.20)
4/0 (19, 7), 250 (37, 19), 266.8 (19, 7)
4/0 (6/1), 266.8 (18/1)
300 (37, 19), 336.4 (19), 350 (37, 19), VC6 7-3/8 3-5/8 .54
VCJS85R 336.4 (18/1, 36/1),
397.5 (19), 400 (37), 450 (37, 19), VC6FT (187.3) (92.1) (.24)
397.5 (18/1, 36/1), 477 (18/1, 36/1)
477 (37, 19), 500 (37, 19)
250 (37, 19), 266.8 (19, 7), 300 (37), 266.8 (30/7, 26/7, 24/7, 18/1),
336.4 (19), 350 (37,19), 397.5 (19), 366.4 (30/7, 26/7, 24/7, 18/1), 11-1/8 5-1/2 1.3
VCJS831R
400 (37), 450 (37, 19), 477 (37, 19) 397.5 (26/7, 24/7, 18/1), (282.6) (139.7) (.59)
500 (37, 19), 556.5 (37, 19) 477 (26/7, 24/7,18/1)
477 (26/7), 556.5 (26/7, 24/7), 12-7/8 6-3/8 1.6
VCJS832R 556.5 (37), 636 (37)
636 (18/1, 36/1) (327.0) (161.9) (.72)
700 (61), 715.5 (61, 37) 605 (26/7, 24/7), 636 (26/7, 24/7, 18/1), 12-7/8 6-3/8 1.7
VCJS833R VC8
795 (61, 37) 666.6 (24/7) , 795 (36/1) (327.0) (161.9) (.77)
715 (26/ 7), 14-5/8 7-1/4 2.1
VCJS834R 900 (61, 37)
795 (26/7, 54/7, 24/7, 45/7, 36/1) (371.5) (184.2) (.95)
1,033.5 (61, 37), 1,000 (61)
954 (61, 37), 1000 (61), 954 (54/7, 45/7) 14-5/8 7-1/4 2.2
VCJS835R
1,033.5 (61, 37) 900 (54/7, 45/7) (371.5) (184.2) (1.00)
795 (26/7)

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES: AAC
COMPRESSION
ALUMINUM
PARTIAL-TENSION SPLICES – AAC PTA

• For use with VERSA-CRIMP® or standard die-type compression tools

• Prefilled with tension compound
• Installed with popular compression dies from several manufacturers
DB
• Shorter barrel requires fewer crimps than higher strength splices for
alloyed conductors 17
• Meets industry requirements for partial tension (40% of conductor L
breaking strength) splicing per ANSI C119.4, Class 2

Material: Aluminum

Note: Refer to type PTR partial tension sleeves for splicing higher
strength alloyed aluminum condutors and single core
ACSR.

Product Data & Conductor Size

CONDUCTOR RANGE CONVENTIONAL DIES DIELESS L
TOOL: LENGTH APPROX.
CATALOG AAC COMPACT BURNDY EEI ANDER- INCHES WT. 100
NUMBER STR. INCHES (MM) INDEX KEARNEY T&B DIES SON (MM) LBS. (KG)
.336-.373 5/8 VC6 3.25 8
PTA10 1/0 (7,19) Str. BG, 243 52 8A
(8.53-9.47) 5/8-1 (ALL) (83) (4)
.475-.528 VC6 4.00 16
PTA40 4/0 (7,19) Str. 249 840 76 11A
(12.06-13.41) (ALL) (102) (7)
336.4 .603-.666 321, 705, 1-1/8-1 VC6 4.50 27
PTA337 96 —
19 or 37 Str. (15.31-16.91) 655 1-1/8-2 (ALL) (114) (12)
350 .616-.681 490, 1-1/8-1 6.50 42
PTA350 96 — VC6FT
19, 36, 61 Str. (15.64-17.29) 547 1-1/8-2 (165) (19)
477 or 500 .722-.814 317, 327 6.25 45
PTA477 1-1/8-2 106 14A VC6FT
19 or 37 Str. (18.33-20.68) 426 (159) (20)
556.5 .780-.858 261, 8.75 93
PTA556 1-5/16 115 15A VC8
19 or 37 Str. (19.81-21.79) 318 (222) (42)
636 .835-.918 7.50 87
PTA636 469 1-1/2 125 — VC8
37 Str. (21.20-23.31) (191) (39)
750-800 .998-1.031 10.5 151
PTA795 342 1-5/8 140 — VC8
37 or 61 Str. (23.67-26.18) (267) (68)

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES: AAC AND ACSR
COMPRESSION
ALUMINUM

PTR
PARTIAL-TENSION SPLICES – ACSR

• For use with VERSA-CRIMP® or standard die-type compression tools

• Positive center stop
• Installed with popular compression dies from several manufacturers
DB
• Prefilled with tension compound
18 • Meets industry requirements for partial tension (40% of conductor
L breaking strength) splicing per ANSI C119.4, Class 2

Material: Aluminum

Note: Refer to type PTA partial tension sleeves for AAC

application only.

Product Data & Conductor Size

CONDUCTOR RANGE CONVENTIONAL DIES L
DIELESS LENGTH APPROX.
CATALOG TYPES BURNDY KEARNEY EEI TOOL: INCHES WT. 100
NUMBER & SIZES INCHES (MM) INDEX REF. DIES ANDERSON (MM) LBS. (KG)
2 ACSR (7/1)
737
2 ACSR (6/1) .268-.325 C, 167, 247 VC6 5.00 22
PTR25 or 10A
2 AAAC (7) (6.80-8.25) or 702 (ALL) (127) (10)
747
2 AAC (7)
1/0 ACSR (6/1) 737
.338-.398 C, 167, 660 VC6 6.25 25
PTR10 1/0 AAAC (7) or 10A
(8.58-10.10) 247 or 702 (ALL) (159) (11)
1/0 AAC (7) 747
2/0 ACSR (6/1)
.381-.447 VC6 5.62 25
PTR205 2/0 AAAC (7) 659 3/4 —
(9.67-11.35) (ALL) (143) (11)
2/0 AAC (7)
3/0 ACSR (6/1)
.426-.503 VC6 5.25 25
PTR30 3/0 AAAC (7) 658 840 11A
(10.82-12.77) (ALL) (133) (11)
3/0 AAC (7)
4/0 ACSR (6/1)
.480-.565 1.00 VC6 5.25 34
PTR40 4/0 AAAC (7) 654 12A
(12.19-14.35) 1-2 (ALL) (133) (15)
4/0 AAC (7)
1-1/8-1
336.4 ACSR (18/1) .607-.684 VC6-3 5.25 37
PTR336 655 or 13A
336.4 AAC (19) (15.41-17.37) VC6-FT (133) (17)
1-1/8-2
447 ACSR (18/1) .754-.814 9.00 86
PTR477 720 1-5/16 15A VC8
477 & 500 AAC (19.15-20.67) (227) (39)
795 ACSR (36/1) .997-1.042 11.00 143
PTR795 342 1-1/2 — VC8
795 AAC Rd. Str. (25.32-26.46) (279) (65)

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES
COMPRESSION
ALUMINUM
FULL TENSION SPLICES-AAC FTA

• Positive center stop and tapered ends

• Installed with popular compression tools and dies from several
manufacturers, or VERSA-CRIMP® dieless system
• Prefilled with tension joint compound
DB
• Meets industry requirements for full tension (95% of conductor 19
breaking strength) splicing per ANSI C119.4, Class 1
L
Material: Aluminum

Note: Refer to type FTR—full tension sleeves for splicing higher

strength alloyed aluminum conductors and single core
ACSR.

FTR splices may also substitute for FTA splice installations.

Product Data & Conductor Size

(1) CONDUCTOR RANGE CONVENTIONAL DIES
L APPROX.
CATALOG BURNDY KEARNEY EEI LENGTH WT. 100
NUMBER ALUMINUM INCHES (MM) INDEX REF. DIES INCHES (MM) LBS. (KG)
.336-.373 5/8 7.25 16
FTA10 1/0 (7, 19) Str. BG, 243 8A
(8.53-9.47) 5/8-1 (184) (7)
.376-.419 5/8 9.25 25
FTA20 2/0 (7, 19) Str. 245 9A
(9.55-10.64) 5/8-1 (234) (11)
.475-.528 10.50 40
FTA40 4/0 (7, 19) Str. 249 840 11A
(12.06-13.41) (266) (18)
336.4 .603-.666 321, 705, 1-1/8-1 9.87 58
FTA337 —
19 or 37 Str. (15.31-16.91) 655 1-1/8-2 (251) (26)
350 .616-.681 490, 1-1/8-1 11.00 70
FTA350 —
19, 36, 61 Str. (15.64-17.29) 547 1-1/8-2 (279) (32)
397.5 .659-.724 1-1/8-1 12.25 84
FTA397 468, 655 13A
19 Str. (16.73-18.38) 1-1/8-2 (311) (38)
477 or 500 .722-.814 12.75 113
FTA477 317, 327, 426 1-1/8-2 14A
19 or 37 Str. (18.33-20.68) (324) (51)
556.5 .780-.858 12.75 138
FTA556 261, 318 1-5/16 15A
19 or 37 Str. (19.81-21.79) (324) (63)
750-800 .998-1.031 1-1/2 13.62 199
FTA795* 342 —
37 or 61 Str. (23.67-26.18) 1-5/8 (346) (90)
(1) Compact strand sizes within the O.D. inch range may be used.
*Consult factory; FTR795 option also available.

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES COMPRESSION
FULL TENSION “JIFFY SPLICES” –
ALUMINUM

FTR
ACSR (and AAC)

• Positive center stop and tapered ends

• Installed with popular compression tools and dies from several
manufacturers
DB • Prefilled with tension joint compound
20 • Meets industry requirements for full tension (95% of conductor
L breaking strength) splicing per ANSI C119.4, Class 1

Material: Aluminum

Note: Refer to type FTA—full tension sleeves for AAC application

only.

Product Data & Conductor Size

(1) CONDUCTOR RANGE CONVENTIONAL DIES
L APPROX.
CATALOG TYPES & BURNDY KEARNEY EEI LENGTH WT. 100
NUMBER SIZES INCHES (MM) INDEX REF. DIES INCHES (MM) LBS. (KG)
4 ACSR (7/1)
4 ACSR (6/1) .182-.257 12.00 37
FTR4** BG, 8A
4 AAAC (7) (4.62-6.52) (305) (17)
243 5/8
4 AAC (7)
or 5/8-1 or 635
2 ACSR (6/1)
.268-.325 687 10.25 28
FTR2** 2 AAAC (7) 9A
(6.80-8.25) (260) (13)
2 AAC (7)
2 ACSR (7/1)
2 ACSR (6/1) .268-.325 C 13.00 56
FTR25**
2 AAAC (7) (6.80-8.25) 167, 247, 702 (330) (25)
737
2 AAC (7) 10A
747
1/0 ACSR (6/1) C
.338-.398 14.75 59
FTR10** 1/0 AAAC (7) 167, 660,
(8.58-10.10) (375) (26)
1/0 AAC (7) 247, 702
2/0 ACSR (6/1) 781
.381-.447 16.00 70
FTR205** 2/0 AAAC (7) 659 or —
(9.67-11.35) (406) (32)
2/0 AAC (7) 3/4
3/0 ACSR (6/1)
.426-.503 18.25 88
FTR30** 3/0 AAAC (7) 658 840 11A
(10.82-12.77) (468) (40)
3/0 AAC (7)
4/0 ACSR (6/1) 1.00
.480-.565 18.50 120
FTR40** 4/0 AAAC (7) 654 or 12A
(12.19-14.35) (470) (54)
4/0 AAC (7) 1-2
336.4 ACSR (18/1) .607-.684 19.25 137
FTR336 655 1-1/8-1 13A
336.4 AAC (19) (15.41-17.37) (489) (62)
or
397.5 ACSR (18/1) .681-.743 22.00 154
FTR397 327 1-1/8-2 14A
350 & 397.5 AAC (17.29-18.87) (559) (70)
477 ACSR (18/1) .754-.814 23.00 220
FTR477 720 1-5/16 15A
447 & 500 AAC (19.15-20.67) (582) (100)
795 ACSR (36/1) .997-1.042 25.00 325
FTA795 342 1-1/2 —
795 AAC (25.32-26.46) (635) (147)
(1) Compact and 5005 cable sizes within the O.D. range may be used.
**RUS Listed
ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017
 VERSA-CRIMP® ALUMINUM
COMPRESSION SPLICE
ALUMINUM
TYPES VC-A, VC-AR, VC-R VCA, VCAR, VCR
FULL TENSION-AAC and ACSR
• ANSI C119.4, full tension, Class 1 connector (95% of conductor
breaking strength)
• For use with VERSA-CRIMP® tools only
• For aluminum, single core ACSR, 5005, 6201 and compact
DB
conductor splicing 21
D
• Compressed (compact) conductor sizes within the same decimal L
conductor range are recommended
• One piece splice eliminates cutting back the aluminum strands on
ACSR conductors, except on VC90R which requires the outside
layer (aluminum strands) to be cut back 5” on each side

Material: Body – Aluminum Alloy

Factory inhibited

Product Data & Conductor Size

DIMENSIONS APPROX.
CONDUCTOR RANGE – VERSA CRIMP TOOLS VERSA-CRIMP INCHES (MM) WT.
CATALOG TOOL EACH
NUMBER AAC ACSR 5005 OR AAAC (6201) TYPE ∆ L D LBS. (KG)
13-1/8 6-1/2 .32
VC36R** #4 (19), #4 (7), #2 (7) #4 (7/1, 6/1), #2 (7/1, 6/1) 48.69 (7), 77.47 (7)
(333.4) (165.1) (.14)
6-1/4 3-1/16 .16
VC410A #4 (7), #2 (7), 1/0 (7) — —
(158.8) (77.8) (.07)
15-7/8 7-7/8 .55
VC44R #2 (7), 1/0 (19), 1/0 (7) #2 (7/1, 6/1), 1/0 (6/1) 77.47 (7), 123.3 (7)
(403.2) (200.0) (.25)
#2 (7), 1/0 (19,7), 2/0 #2 (6/1, 7/1), 1/0 (6/1), 17-1/4 8-9/16 .65
VC50R** 123.3 (7), 155.4 (7)
(19,7) 2/0 (6/1) (438.2) (217.5) (.29)
VC6
1/0 (7), 2/0 (7), 3/0 (7), 7-5/8 3-3/4 .35
VC58A — — (ALL)
4/0 (7) (193.7) (95.3) (.16)
1/0 (6/1), 2/0 (6/1), 3/0
1/0 (19,7), 2/0 (7), 3/0 (7), 155.4 (7), 195.7 (7), 19-7/8 9-3/4 1.1
VC61R** (6/1),
4/0 (7) 246.9 (7) (504.8) (247.7) (.50)
4/0 (6/1)
4/0 (7), 266.8 (19,7), 9 4-716 .48
VC70A — —
336.4 (19) (228.6) (112.7) (.22)
4/0 (7), 226.8 (19,7), 4/0 (6/1), 226.8 (18/1), 22-7/8 11-3/8 1.6
VC80R** —
336.4 (19), 397.5 (19) 336.4 (18/1), 397.5 (18/1) (581.0) (288.9) (.72)
336.4 (19), 397.5 (19), ALL 11-3/4 5-13/16 .81
VC85A — —
477 (37,19) except VC6350 (298.5) (147.6) (.37)
22-7/8 11-3/8 1.7
VC90R — 397.5 (18/1), 477 (18/1) —
(581.0) (288.9) (.77)
VC8
21-5/8 10-3/4 2.5
*VC813AR — — 652.4 (19), 740.8 (37)
(549.3) (273.0) (1.13)
* Three end crimps are factory formed to minimize vibration damage to conductor.
** RUS Listed
∆ For VC6350/VC6500 connector and conductor recommendations, see application label in top of tool case.

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES-CU
COMPRESSION
COPPER

VHSS
VERSAtile™ COMPRESSION SPLICE
MINIMUM TENSION
STANDARD LENGTH

• ANSI C119.4, minimum tension, Class 3 connector (5% of conductor

DB breaking strength)
22 • For use with either VERSA-CRIMP® or conventional compression tools
• For copper stranded conductor, only
• Color coded bands for easy die selection

Material: Copper—Tin plated

D L
LISTED
261L

Product Data & Conductor Size

DIMENSIONS
VERSA-
COPPER CONDUCTOR INCHES (MM)
CRIMP APPROX.
CATALOG CONVENTIONAL VERSA–CRIMP TOOL WT. EACH I.D.
NUMBER WIRE SIZE SYSTEM RANGE TYPE L D LBS. (KG) (INCHES)
VC6350 1-3/4 13/16 .026
VHSS4 #4 Str. #4 Str. .246
VC6500 (44.45) (20.64) (.01)
1-7/8 7/8 .04
VHSS2 #2 Str. #6–#2 Str. .306
(47.62) (22.22) (.018)
1-7/8 7/8 .057
VHSS10 1/0 Str. #6-1/0 Str. .393
(47.62) (22.22) (.025)
2 15/16 .065
VHSS20 2/0 Str. #4-2/0 Str. VC6 .443
(50.8) (23.81) (.029)
(ALL)
2-1/8 1 .094
VHSS30 3/0 Str. #2-3/0 Str. .490
(53.98) (25.4) (.042)
VC7
2-1/8 1 .094
VHSS40 4/0 Str. #1-4/0 Str. (ALL) .547
(53.98) (25.4) (.042)
2-1/4 1-1/16 .12
VHSS250 250 MCM 1/0-250 MCM .595
(57.15) (26.97) (.054)
2-1/4 1-1/16 .14
VHSS300 300 MCM 2/0-300 MCM .650
(57.15) (26.97) (.063)
2-3/8 1-1/8 .17
VHSS350 350 MCM 3/0-350 MCM VC6-3 .700
(60.32) (28.58) (.077)
VC7
2-1/2 1-3/16 .31
VHSS400 400 MCM 4/0-400 MCM VC6FT .762
(63.5) (30.16) (.14)
VC7FT
2-7/8 1-3/8 .32
VHSS500 500 MCM 4/0-500 MCM VC8** .834
(73.02) (34.92) (.14)
VC6FT
3-3/8 1-5/8 .54
VHSS750 750 MCM 500-750 MCM VC7FT 1.030
(85.72) (41.28) (.24)
VC8**
Refer to page DB-25 for recommended tool and die information.
**Type VC8 compression tool crimping range is 500-1500 MCM Cu.
HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at 34.5 KV. The other U.L. listed com-
pression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 2000 volts, however Anderson recommends these
connectors for application through 34.5 kV subject to manufacturers’ limitations for insulation material. For further information, contact factory.

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 OVERHEAD LINE SPLICES-CU
COMPRESSION, VERSAtile™ SPLICE
COPPER
MINIMUM TENSION, HEAVY DUTY LENGTH VHS

• ANSI C119.4, minimum tension, Class 3 connector (5% of conductor

breaking strength)
• For use with either VERSA-CRIMP® or conventional compression tools
• For copper stranded conductor, only
DB
• Color coded bands for easy die selection 23

Material: Copper—Tin plated

LISTED D L
261L

Product Data & Conductor Size

DIMENSIONS
VERSA-
COPPER CONDUCTOR INCHES (MM)
CRIMP APPROX.
CATALOG CONVENTIONAL VERSA–CRIMP TOOL WT. EACH I.D.
NUMBER WIRE SIZE SYSTEM RANGE TYPE L D LBS. (KG) (INCHES)
2-3/8 1-1/8 .03
VHS6** #6 Str. #6 Str. .198
VC6350 (60.32) (28.58) (.01)
VC6500 2-3/8 1-1/8 .03
VHS4** #4 Str. #4 Str. .246
(60.32) (28.58) (.01)
2-3/8 1-1/4 .05
VHS2** #2 Str. #6–#2 Str. .306
(60.32) (31.75) (.02)
2-7/8 1-3/8 .06
VHS1** #1 Str. #6-#1 Str. .358
(73.02) (34.92) (.027)
2-7/8 1-3/8 .08
VHS10** 1/0 Str. #6-1/0 Str. .393
(73.02) (34.92) (.036)
VC6
3-1/8 1-1/2 .09
VHS20** 2/0 Str. #4-2/0 Str. (ALL) .443
(79.38) (38.1) (.04)
3-1/8 1-1/2 .11
VHS30** 3/0 Str. #2-3/0 Str. VC7 .490
(79.38) (38.1) (.05)
(ALL)
3-3/8 1-5/8 .15
VHS40** 4/0 Str. #1-4/0 Str. .547
(85.72) (41.28) (.068)
3-3/8 1-5/8 .18
VHS250** 250 MCM 1/0-250 MCM .595
(85.72) (41.28) (.082)
4-1/8 2 .25
VHS300** 300 MCM 2/0-300 MCM .650
(104.78) (50.8) (.11)
4-1/8 2 .29
VHS350** 350 MCM 3/0-350 MCM VC6-3 .700
(104.78) (50.8) (.13)
VC7
4-3/8 2-1/8 .37
VHS400** 400 MCM 4/0-400 MCM VC6FT .762
(111.12) (53.98) (.17)
VC7FT
4-5/8 2-1/4 .50
VHS500** 500 MCM 4/0-500 MCM VC8*** .834
(117.48) (57.15) (.23)
5-1/2 2-11/16 .78
VHS600** 600 MCM 250-600 MCM VC6FT .923
(139.7) (68.26) (.35)
VC7FT
5-7/8 2-7/8 .94
VHS750** 750 MCM 500-750 MCM VC8*** 1.030
(149.22) (73.02) (.43)
6-1/8 3 1.30
VHS1000** 1000 MCM 750–1000 MCM VC8*** 1.172
(155.58) (76.2) (.59)

Refer to page DB-26 for recommended tool and die information.

** RUS Listed
*** Type VC8 tool crimping range is 500-1500 MCM Cu.
HIGH VOLTAGE APPLICATIONS—All Aluminum/Copper and Copper Lugs (VCEL, VACL, VHCL, VHCS and VCELC) are rated at 34.5 KV. The other U.L. listed com-
pression connectors (VACS, VACT, VCCT, VHSS and VHS) have a maximum UL voltage requirement of less than 2000 volts, however Anderson recommends these
connectors for application through 34.5 KV subject to the manufacturers’ limitations and recommendations for the insulation material. For further information,
contact factory.

ANDERSON™ HUBBELL® POWER SYSTEMS FARGO® November 2017

 24
DB
VACL/VACS/VACT—Anderson/Burndy
ANDERSON™ VERSA-CRIMP® COMPRESSION
TOOLS CONVENTIONAL COMPRESSION DIE TOOLING
(Crimps per Connection) (Crimps per Connection)
VERSA-CRIMP Tools Burndy Burndy Indentor Tools
(Number of Crimps) (Crimps) (1 Crimp)
Catalog V-C Tools Wire Tool Tool Tool Tool
Number Wire Size Die Tools Y34A Y34B Y48B Y486RB
VACL (3) Range VC6 VC8 (AWG Color Die Tool Y35 Tool Tool Tool Tool (Inden- (Inden- (Inden- (Inden-
VACS (4) (AWG or *VC6 VC6 VC6 FT AL or Code Index Y34A Y39 Y34B Y48B Y486RB MY-29 tor) tor) tor) tor)
VACT (4) MCM) 500 350 (1) (1) NIBS MCM) (2) No. Die Die Die Die Die Die Nest Nest Nest Nest
#8 U8CABT #8
-8 #8 AL/CU 1 1 Blue 374
AL/CU (2) (1)
#6 A6CAB U6CABT B6CD #6 A4CD B4CD
-6 #6 AL/CU 1 1 Gray 346
AL/CU (1) (1) (1) (1) (Y34PA) (Y34PA)
#4 A4CAB U4CABT B4CD C4CAB #4 A1CD B1CD
-4 #4 AL/CU 2 2 Green 375
AL/CU (1) * (1) (1) (1) (1) (Y34PA) (Y34PA)
#2 A2CAB U2CABT B2CD #2 A26D B26D
-2 #6-#2 AL/CU 2 2 2 2 Pink 348
AL/CU (1) (1) (1) (2) (Y34PA) (Y34PA)
#1 A25AR U25ART B1CD #1 A27D B27D
-1 #8-#1 AL/CU 2 2 2 2 Tan 296
AL/CU (1) * (1) (1) (2) (Y34PR-5) (Y34PR-5)
1/0 A25AR U25ART B25D 1/0 A27D B27D
-1/0 #8-1/0 AL/CU 2 2 2 2 Tan 296
AL/CU (1) * (1) (1) (2) (Y34PR-5) (Y34PR-5)
2/0 A26AR U26ART B26D 2/0 A29D B29D
-2/0 #4-2/0 AL/CU 2 2 2 2 Olive 297
AL/CU (2) (2) (1) (2) (Y34PR-5) (Y34PR-5)

ANDERSON™ HUBBELL® POWER SYSTEMS

3/0 A27AR U27ART B27D 3/0 A30D B30D
-3/0 #4-3/0 AL/CU 2 2 2 2 Ruby 467
AL/CU (2) (2) (1) (2) (Y34PR-5) (Y34PR-5)
4/0 A28AR U28ART B28D C28AR F28AR 4/0 A31D B31D
-4/0 #2-4/0 AL/CU 3 3 2 2 White 298
AL/CU (2) (2) (1) (1) (1) (2) (Y34PR-5) (Y34PR-5)
250 A29AR U29ART B29D C29AR F29AR A32D B32D
-250 1/0-250 AL/CU 3 3 2 2 Red 324
AL/CU (2) (2) (1) (1) (1) (Y34PR-5) (Y34PR-5)
300 A30AR U30ART B30D C30AR F30AR A34D C34D F34D
-300 1/0-300 AL/CU 3 3 2 2 Blue 470 No Die
AL/CU (2) (2) (2) (1) (1) (Y34PR-11) (Y48PR-1) (Y48PR-1)
-350 350 U31ART B31D C31AR F31AR C35D F35D
(1) 2/0-350 AL/CU 4 3 3 Brown 299
AL/CU (2) (2) (1) (1) (Y48PR-1) (Y48PR-1)
-400 4 4 400 U32ART B32D C32AR F32AR C36D F36D
(1) 3/0-400 AL/CU 5 Green 472
O’lap O’lap AL/CU (4) (2) (2) (2) (Y48PR-1) (Y48PR-1)

FARGO®
No Die
-500 4 4 500 U32ART C32AR F32AR
(1) 4/0-500 AL/CU 7 Green 472 Required
O’lap O’lap AL/CU (4) (2) (2)
(2)
350 - 600 AL U34ART C34AR F34AR
-600 4 3 600 AL Pink 300
350 - 500 CU (4) (2) (2)
500 - 750 AL U34ART C34AR F34AR
-750 4 3 750 AL Pink 300
500 CU (4) (2) (2)
750-1000 C44AR F44AR C46D F46D
-1000 3 1000 AL Brown 302
AL (2) (2) (Y48PR-1) (Y48PR-1)
+ TBM-8 Tool ONLY
H Anderson HC-12 Dies, Burndy’s Y-35 Dies and Blackburn’s JB-12 Dies are interchangeable.
(1) “VACL” Lug sizes -350 to -500 take 1 less crimp (VC6 Tools) than shown.
(2) Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Blackburn, Kearney & T&B Hyd. Tools/Dies.
(3) The “VACL” lugs are qualified for UL “HV” applications.
(4) The “VACS” sleeves and “VACT” tee connectors are for AL to AL or AL to CU connections ONLY. (NOT for CU to CU connections).

November 2017
* Not UL Listed-pending completion of test.
 VACL/VACS/VACT—Anderson/Burndy
ANDERSON™ VERSA-CRIMP® COMPRESSION
TOOLS CONVENTIONAL COMPRESSION DIE TOOLING
(Crimps per Connection) (Crimps per Connection)
VERSA-CRIMP Tools Blackburn Kearney Thomas & Betts
(Number of Crimps) (Crimps) (Crimps) (Crimps)
Catalog V-C Tools Wire Tools
Number Wire Size Die Tool Tool Tools TBM5 12 Ton 15 Ton
VACL (3) Range VC6 VC8 (AWG Color OD-58 JB-12A (No. of Crimps) TBM8 Hyd. Tool Hyd. Tool
VACS (4) (AWG or *VC6 VC6 VC6 FT AL or Code WH-1 WH-2
VACT (4) MCM) 500 350 (1) (1) NIBS MCM) (2) Die Die Die O-52 PH-1 PH-2 Die Die Die
#8 BY17C B73CH Blue 24 24
-8 #8 AL/CU 1 1 Blue 1/4 (2)
AL/CU (2) (1) (1) (1) (1)
#6 BY19C B74CH Gray 29 29
-6 #6 AL/CU 1 1 Gray 5/16 (3) (1) (1)
AL/CU (3) (1) (2) (2) (2)
#4 BY21C U4CABT Green 37 37
-4 #4 AL/CU 2 2 Green 3/8 (3) (2) (2)
AL/CU (3) * (1) (2) (2) (2)
#2 BY23C BO6CH Pink 45 45
-2 #6-#2 AL/CU 2 2 2 2 Pink 1/2 (3) (2) (2)
AL/CU (3) (1) (2) (2) (2)
#1 BY23C U25ART Tan 50 50
-1 #8-#1 AL/CU 2 2 2 2 Tan 9/16 (4) (2) (2)
AL/CU (4) * (1) (2) (2) (2)
1/0 BY25C U25ART Tan 50 50
-1/0 #8-1/0 AL/CU 2 2 2 2 Tan 9/16 (4) (2) (2)
AL/CU (4) * (1) (2) (2) (2)
2/0 BY31C B09CH Olive 54 54H
-2/0 #4-2/0 AL/CU 2 2 2 2 Olive 5/8-1 (4) (3) (3)
AL/CU (4) (2) (2) (1) (2)

ANDERSON™ HUBBELL® POWER SYSTEMS

3/0 BY27C B26CH Ruby 62 62
-3/0 #4-3/0 AL/CU 2 2 2 2 Ruby 11/16 (5) (3) (3)
AL/CU (5) (2) (2) (1) (1)
4/0 BY35C B10CH1 +White 71H 71H
-4/0 #2-4/0 AL/CU 3 3 2 2 White 781 (5) (3) (3)
AL/CU (5) (2) (4) (3) (3)
250 BY37C B11CH +Red 76H 76
-250 1/0-250 AL/CU 3 3 2 2 Red 840 (5) (3) (3)
AL/CU (5) (2) (5) (3) (2)
300 B61EA +Blue 87H 87H
-300 1/0-300 AL/CU 3 3 2 2 Blue 29/32 (2) (2)
AL/CU (1) (5) (3) (3)
-350 350 B12CH1 +Brown 94H 94H
(1) 2/0-350 AL/CU 4 3 3 Brown 1-1/8-1 (2) (2)
AL/CU (2) (5) (3) (3)
-400 4 4 400 B80EA 99H 99H
(1) 3/0-400 AL/CU 5 Green 1-1/8-1 (2) (2)

FARGO®
O’lap O’lap AL/CU (2) (3) (3)
-500 4 4 500 B80EA 96H 96
(1) 4/0-500 AL/CU 7 Green 1-1/8-2 (2) (2)
O’lap O’lap AL/CU (3) (4) (2)
350 - 600 AL B20AH 106H 106H
-600 4 3 600 AL Pink 1-5/16 (4)
350 - 500 CU (3) (5) (5)
500 - 750 AL B20AH 106H 106H
-750 4 3 750 AL Pink 1-5/16 (4)
500 CU (3) (5) (5)
750-1000
-1000 3 1000 AL Brown
AL

+ TBM-8 Tool ONLY

H Anderson HC-12 Dies, Burndy’s Y-35 Dies and Blackburn’s JB-12 Dies are interchangeable.
(1) “VACL” Lug sizes -350 to -500 take 1 less crimp (VC6 Tools) than shown.
(2) Color code is for Anderson and Burndy dies only. Use the recommended die number (NOT die color) for Blackburn, Kearney & T&B Hyd. Tools/Dies.
(3) The “VACL” lugs are qualified for UL “HV” applications.
(4) The “VACS” sleeves and “VACT” tee connectors are for AL to AL or AL to CU connections ONLY. (NOT for CU to CU connections).
* Not UL Listed-pending completion of test.

November 2017
25
DB
 26
DB
VHSS & VHCS
ANDERSON™ VERSA-CRIMP® COMPRESSION TOOLS CONVENTIONAL COMPRESSION DIE TOOLING
(Crimps per Connection) (Crimps per Connection)
VERSA-CRIMP® Tools Burndy Burndy Longitudinal Indent Kearney Thomas & Betts
V-C Tools (Number of Crimps) (Crimps) (Crimps) (Crimps) (Crimps)
Wire Copper Tool Hyd. Conduc-
Cata- Range Wire Tool Tool Tool Y48B Tool Tools Tools tor
log AWG or Size Y34A Y34B Y44B Inden- Y486RB Y35 Tools 12, 15 Insulation
Num- MCM AWG Tool Indentor Indentor Indentor tor Indentor Y39 Tools Tools TBM5 20 & Strip
ber Stranded VC8 or Die MY29-3 Y34PR Y34PR Y44PR Y48PR Y48PR Y45† “O” “WH” TBM8 40 Ton Lengths
VHSS (Copper *VC6 VC6 VC6 VC6 VC7 AL MCM Color Nest (Min.)
VHCS Only) -500 -350 (1) FT VC7 FT NIBS STR Code Setting Nest Nest Nest Nest Nest Die Die Die Die Die (1)
#6 A6CD B6CD U5CRT Blue 24
-6 #6 1 1 #6 Blue 15/16”
(1) (1) (1) (1) (2) (1)
#4 A4CD B4CD U4CRT 5/16 5/16 Gray 29
-4 #4 1 1 #4 Gray 15/16”
(1) (1) (1) (1) (3) (1) (2) (1)
#2 A2CD B2CD U2CRT 3/8 3/8 Brown 33
-2 #6-#2 1 1 1 1 1 1 #2 Brown 1”
(1) (1) (1) (1) (3) (1) (2) (1)
#1 A1CD B1CD U1CRT Green 37
-1 #6-#1 1 1 1 1 1 1 #1 Green 1”
(1) (1) (1) (1) (2) (1)
1/0 A25D B25D E25D U25RT 1/2 1/2 Pink 42H(2)
-1/0 #6-1/0 1 1 1 1 1 1 1/0 Pink 1”
(1) (1) (1) (1) (1) (3) (1) (2) 42(1)
2/0 A26D B26D E26D U26RT 9/16 9/16 Black 45
-2/0 #4-2/0 1 1 1 1 1 1 2/0 Black 1-1/16”
(1) (1) (1) (1) (1) (3) (1) (2) (1)
2 2 3/0 A27D B27D E27D U27RT 9/16 9/16 Orange 50
-3/0 #2-3/0 2 2 2 2 3/0 Orange 1-1/8”
O’lap O’lap (1) (1) (1) (1) (1) (3) (2) (2) (1)

ANDERSON™ HUBBELL® POWER SYSTEMS

2 2 4/0 A28D B28D E28D C28D F28D U28RT 5/8-1 5/8-1 Purple 54
-4/0 #1-4/0 2 2 2 2 4/0 Purple 1-1/8”
O’lap O’lap (1) (1) (1) (1) (1) (1) (1) (3) (2) (2) (1)
2 2 250 A29D B29D E29D C29D F29D U29RT 11/16 11/16 Yellow 60(1)
-250 1/0-250 2 2 2 2 250 Yellow 1-3/16”
O’lap O’lap (1) (1) (1) (1) (1) (1) (1) (3) (2) (2) 62(1)
2 2 A30D B30D E30D C30D F30D U30RT 781 781 +White 66H(2)
-300 2/0-300 2 2 2 2 300 White 1-3/16”
O’lap O’lap (1) (1) (1) (1) (1) (1) (3) (2) (2) 66(1)
3 2 2 A31D B31D E31D C31D F31D U31RT 840 840 +Red 71H(2)
-350 3/0-350 2 2 350 Red 1-1/4”
O’lap O’lap O’lap (1) (1) (1) (1) (1) (1) (3) (2) (2) 71(1)
3 2 2 A32D B32D E32D C32D F32D U32RT +Blue 76H(2)
-400 4/0-400 2 2 400 Blue 1-5/16”
O’lap O’lap O’lap (1) (2) (1) (1) (1) (1) (2) 76(1)
1 or
No Die
4 A34D E34D C34D F34D U34RT 1-2 +Brown 87H(2)
-500 4/0-500 2 2 2 2 1 (2) 500 Brown Required 1-1/2”
O’lap (1) (1) (1) (1) (2) (2 (2) 87(1)
(1)

FARGO®
O’lap)
E36D C36D F36D U36RT 94H(2)
-600 250-600 2 2 1 (3) 600 Green 1-1/2”
(1) (1) (1) (2) 94(1)
3 2 E39D C39D F39D 106H(2)
-750 500-750 3 750 Black 1-3/4”
O’lap O’lap (1) (1) (1) 106(1)
2 E40D C40D F40D 107H(2)
-800 500-800 800 1-3/4”
O’lap (1) (1) (1) 107(1)
No Die
C44D F44D 125H(2)
-1000 750-1000 2 1000 Required 2”
(1) (1) 125(1)
(1)
C46D F46D
-1500 1000-1500 2 1500 2-1/8”
(1) (1)
+ TBM-8 ONLY
† Burndy Y45 head requires an adapter for use with “U” series dies.
(1) Users of VC6 and VC7 tools must strip off an extra 1-5/8” of insulation from one end of cable to permit removal of tool over conductor sizes 250 MCM and larger on “VHSS” sleeves.
(2) VC8 tool crimps 500 MCM ONLY.

November 2017
(3) VC8 tool crimps 500-600 MCM ONLY.
* Not UL Listed-pending completion of test.
 VHS & VHCL
ANDERSON™ VERSA-CRIMP® COMPRESSION TOOLS CONVENTIONAL COMPRESSION DIE TOOLING
(Crimps per Connection) (Crimps per Connection)
VERSA-CRIMP® Tools Burndy Burndy Longitudinal Indent Kearney Thomas & Betts
V-C Tools (Number of Crimps) (Crimps) (Crimps) (Crimps) (Crimps) Conduc-
Wire Copper Tool Tool Tool Tool Hyd. tor
Range Wire Y34A Y34B Y44B Y48B Tool Tools Tools Insula-
Catalog AWG or Size Inden- Inden- Inden- Inden- Y486RB Y35 Tools 12, 15 tion
Num- MCM AWG Tool tor tor tor tor Indentor Y39 Tools Tools TBM5 20 & Strip
ber Stranded VC8 or Die MY29-3 Y34PR Y34PR Y44PR Y48PR Y48PR Y45† “O” “WH” TBM8 40 Ton Lengths
VHS (Copper *VC6 VC6 VC6 VC6 VC7 AL MCM Color Nest (Min.)
VHCL Only) -500 -350 (1) FT VC7 FT NIBS STR Code Setting Nest Nest Nest Nest Nest Die Die Die Die Die (1)
#6 A6CD B6CD U5CRT Blue 24
-6 #6 2 2 #6 Blue 1-1/4”
(1) (1) (1) (2) (2) (1)
#4 A4CD B4CD U4CRT 5/16 5/16 Gray 29
-4 #4 2 2 #4 Gray 1-1/4”
(1) (1) (1) (2) (5) (2) (2) (1)
2 2 #2 A2CD B2CD U2CRT 3/8 3/8 Brown 33
-2 #6-#2 2 2 2 #2 Brown 1-3/8”
O’lap O’lap (1) (1) (1) (2) (5) (2) (2) (1)
#1 A1CD B1CD U1CRT Green 37
-1 #6-#1 3 3 2 2 2 2 #1 Green 1-1/2”
(1) (1) (1) (1) (2) (1)
1/0 A25D B25D E25D U25RT 1/2 1/2 Pink 42H(2)
-1/0 #6-1/0 3 3 2 2 2 2 1/0 Pink 1-1/2”
(1) (1) (1) (1) (2) (5) (2) (2) 42(1)
2/0 A26D B26D E26D U26RT 9/16 9/16 Black 45
-2/0 #4-2/0 3 3 2 2 2 2 2/0 Black 1-5/8”
(1) (1) (1) (1) (2) (5) (3) (2) (1)
3/0 A27D B27D E27D U27RT 9/16 9/16 Orange 50
-3/0 #2-3/0 3 3 2 2 2 2 3/0 Orange 1-5/8”
(1) (1) (1) (1) (2) (5) (3) (2) (1)

ANDERSON™ HUBBELL® POWER SYSTEMS

4/0 A28D B28D E28D C28D F28D U28RT 5/8-1 5/8-1 Purple 54
-4/0 #1-4/0 3 3 2 2 2 2 4/0 Purple 1-3/4”
(1) (1) (1) (1) (1) (1) (2) (5) (3) (2) (1)
250 A29D B29D E29D C29D F29D U29RT 11/16 11/16 Yellow 60(1)
-250 1/0-250 3 3 2 2 2 2 250 Yellow 1-3/4”
(1) (1) (1) (1) (1) (1) (2) (5) (3) (2) 62(1)
A30D B30D E30D C30D F30D U30RT 781 781 +White 66H(4)
-300 2/0-300 4 4 3 3 3 3 300 White 2-1/8”
(2) (2) (2) (2) (2) (2) (5) (3) (4) 66(2)
A31D B31D E31D C31D F31D U31RT 840 840 +Red 71H(4)
-350 3/0-350 5 3 3 3 3 350 Red 2-1/8”
(2) (2) (2) (2) (2) (2) (5) (3) (4) 71(2)
A32D B32D E32D C32D F32D U32RT +Blue 76H(4)
-400 4/0-400 6 3 3 3 3 400 Blue 2-1/4”
(2) (2) (2) (2) (2) (2) (4) 76(2)
No Die 1 or
4 4 A34D E34D C34D F34D U34RT +Brown 87H(4)
-500 4/0-500 6 4 4 2 (2) 500 Brown Required 1-2 2-3/8”
O’lap O’lap (2) (2) (2) (2) (4) (4) 87(2)
(2) (3)

FARGO®
E36D C36D F36D U36RT 94H(4)
-600 250-600 4 4 3 (3) 600 Green 2-13/16”
(2) (2) (2) (5) 94(2)
4 E39D C39D F39D 106H(4)
-750 500-750 4 3 750 Black 3”
O’lap (2) (2) (2) 106(2)
E40D C40D F40D 107H(4)
-800 500-800 3 800 3-1/16”
(2) (2) (2) 107(2)
No Die
4 C44D F44D 125H(4)
-1000 750-1000 1000 Required 3-1/8”
O’lap (2) (2) 125(2)
(2)
4 C46D F46D
-1500 1000-1500 1500 3-5/16”
O’lap (2) (2)

+ TBM-8 ONLY
† Burndy Y45 head requires an adapter for use with “U” series dies.
(1) Users of VC6 and VC7 tools must strip off an extra 1-5/8” of insulation from one end of cable to permit removal of tool over conductor sizes 250 MCM and larger on “VHS” sleeves.
(2) VC8 tool crimps 500 MCM ONLY.

November 2017
(3) VC8 tool crimps 500-600 MCM ONLY.
* Not UL Listed-pending completion of test.
27
DB