Scribd
Upload
142 views1 page

FTP Setup Guide for File Transfer

This document provides instructions for setting up an FTP server on a PC to enable file transfer between a CNC machine and the PC. It outlines selecting the FTP setup option from a pull-down menu, setting specific items then saving and closing. It also notes that once configured, launching the FTPSERV file or setting it to auto-launch at startup allows the PC to communicate with the CNC machine and view the file transfer log.

Uploaded by

Wazabi Moo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
142 views1 page

FTP Setup Guide for File Transfer

This document provides instructions for setting up an FTP server on a PC to enable file transfer between a CNC machine and the PC. It outlines selecting the FTP setup option from a pull-down menu, setting specific items then saving and closing. It also notes that once configured, launching the FTPSERV file or setting it to auto-launch at startup allows the PC to communicate with the CNC machine and view the file transfer log.

Uploaded by

Wazabi Moo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CNC Technical Services

7449 Auburn Road


Hornby, Ontario L0P 1E0
(905) 693 1334

• Select SETUP FTP from the pull down menu as shown below.

• Set the circled items as listed below then click SAVE and CLOSE
tab.

Optional

• When you want to use the software for file transfer all you have to
do is launch the program by clicking on the blue FTPSERV file or
have the software automatically launch at Windows startup. When
the NC tries to communicate with the PC you will see the
communication log as shown below.

You might also like