STANDARDS, REGULATIONS, AND LISTINGS aquatherm
500 S 500 W
The following national and international standards, regulations, and listings are applicable Lindon UT, 84042
to Aquatherm piping systems. 801-805-6657
• NSF Standard 61 ([Link] 180 °F/82 °C) • ASTM F2389
Suitable for potable water Standard specification for pressure rated polypropylene (PP)
piping systems
• NSF Standard 14
Meets piping performance requirements • CSA B137.11
Polypropylene (PP-R) pipe and fittings for pressure applications
• NSF Standard 51
Suitable for food processing up to 212 °F (100 °C) • CSA B214
Polypropylene (PP-R) pipe and fittings for hydronic applications
• CFIA #A508
Canadian Food Inspection Agency approval #A508 • BNQ 3660-950
Safety of products and materials in contact with drinking water
• ICC ESR-1613 / PMG Listing 1014
Polypropylene pipe and fittings meet or exceed North American • ISO 15874
standards Plastic pipe system for hot and cold water installation:
polypropylene
• DIN EN ISO 9001
Quality management systems: requirements • ASTM F2023
Standard test method for evaluating the oxidative resistance of
• IPC 2009 Sec. 605 plastic piping to hot chlorinated water
Water distribution & Water service
• ASTM D 635
• IMC 2009 Chapter 12 Standard test method for rate of burning and/or extent and
Hydronic piping time of burning of plastics in a horizontal position
• IRC 2009 Chapter 21 & 26 • FM 1635
Hydronic piping & Plumbing For wet pipe automatic sprinkler systems in light-hazard
occupancies
• UMC 2009 Chapter 12
Hydronic piping • NFPA 13, 13D and 13R
Standard for the installation of sprinkler systems in one/two-
• UPC 2012 Chapter 6 family dwellings & manufactured homes
Water distribution & Building supply
• DIN EN ISO 14001
• IAPMO File M-6022 Standard for environmental management
Mechanical
• IAPMO File 5053
Plumbing
©2015 Aquatherm NA, L.C. All rights reserved.
[Link]
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a
combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the
supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in
the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product
acceptance by Authorities Having Jurisdiction. acceptance by Authorities Having Jurisdiction.
The most updated information on this Certificate of Listing is available online at [Link] The most updated information on this Certificate of Listing is available online at [Link]
Effective Date: April 2014 Void After: April 2015 Effective Date: June 2014 Void After: June 2015
Product: Pressure Rated Polypropylene Piping Systems File No. M-6022 Product: Pressure Rated Polypropylene Piping Systems File No. 5053
Issued To: Aquatherm Gmbh Issued To: AQUATHERM GMBH
Biggen 5 Biggen 5
D-57439 Attendorn, D-57439 Attendorn,
Germany Germany
Identification: Pipe shall be marked at intervals of not more than 5 ft. with the Identification: Pipe shall be marked at intervals of not more than 5 ft. with the
manufacturer's name or trademark, nominal size, for metric series pipe - the manufacturer's name or trademark, nominal size, for metric series pipe - the
term "metric" and the dimension ratio or both the outside diameter and wall term "metric" and the dimension ratio or both the outside diameter and wall
thickness, IPS series pipe shall include "Schedule 80" or "SCH 80", type of thickness, IPS series pipe shall include "Schedule 80" or "SCH 80", type of
material (PP-R) and classification number (80 or 100), pressure rating and material (PP-R) and classification number (80 or 100), pressure rating and
temperature for which pressure rating is valid, the designation "F2389", temperature for which pressure rating is valid, the designation "F2389",
manufacturer's production code, and pipe intended for the transport of manufacturer's production code, and pipe intended for the transport of
potable water shall bear the mark of the lab making such evaluation. potable water shall bear the mark of the lab making such evaluation.
Fittings shall be marked with the manufacturer's name or trademark, nominal Fittings shall be marked with the manufacturer's name or trademark, nominal
size, dimension ratio or schedule for corresponding pipe and type of material size, dimension ratio or schedule for corresponding pipe and type of material
(PP-R). The fitting or packaging shall be marked with "Metric" or "NPT" for (PP-R). The fitting or packaging shall be marked with "Metric" or "NPT" for
threaded fittings, and the designation "F2389". All products shall bear the threaded fittings, and the designation "F2389". All products shall bear the
UMC certification mark. UPC® certification mark.
Characteristics: Pressure rated polypropylene pipe and fittings manufactured in accordance Characteristics: Pressure rated polypropylene pipe and fittings manufactured in accordance
with ASTM F2389. To be installed per the manufacturer's instructions. with ASTM F2389. To be installed per the manufacturer's instructions and the
latest edition of the Uniform Plumbing Code.
This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,
This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material,
manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of
manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of
non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.
non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing.
Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.
Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc.
Any alteration of this certificate could be grounds for revocation of the listing.
Any alteration of this certificate could be grounds for revocation of the listing.
©2015 Aquatherm NA, L.C. All rights reserved.
[Link]
