B R A I D E D G U I D I N G C A T H E T E R S
FARGOMINI - FARGO - FARGOMAX
FARGOMAX
INNOVATION, ANYWAY
[Link]
FARGOMINI 040 (ID:1.02mm/.040’’/3.1F)
TRIAXIAL TECHNIQUE: FARGOMAX- FARGOMINI- microcatheter (with an OD<3F, such as VASCO+21)
in AVM treatment in Aneurysm treatment
Magic
VASCO+21 SILK+
Fargomini
FARGOMINI VASCO+21
Fargomax
FARGOMINI
FARGOMAX
NITINOL inner braiding struts:
OD: 4,2F (140mm) proximal end; 3,9F (130mm) distal end
SUPPLENESS with extra supple distal part
Use FARGOMINI 040:
For Distal Navigation
For Distal Stability: To control the microcatheter’s tip
For Distal High Flow road map inside a 6F guiding catheter (.070’’), thanks to its small OD
Legend
ID: Inner diameter
OD: Outer diameter
FARGO 058 (ID:1.46mm/.058"/4.4F)
OD: 6F (2mm) proximal end; 4.9F (1.63mm) distal end
HIGHT FLEXIBILITY AND NAVIGABILITY with extra-supple distal part, to pass throught acute curves &
hydrophilic coating
GREAT STABILITY & SUPPORT thanks to tight braiding on distal part, and wide braiding on proximal part
HIGH VISIBILITY thanks to its radiopaque shaft at the end of the distal part
Use FARGO 058:
When your standard guiding catheter is not stable enough
Together with a long introducer and the VASCO+21 for your SILK+ cases
To pass the carotid syphon or up to the basilar
FARGOMAX 070
OD: 6F (2mm) proximal and distal ends
(ID:1.78mm/.070”/5.3F)
SUPPORT with extra-supple distal part
Large ID 1.78mm (0.070”) to fit both a balloon-tipped microcatheter (ECLIPSE or COPERNIC)
and a coiling microcatheter (VASCO+10)
Use FARGOMAX 070:
For your remodeling balloon assisted coiling procedures with VASCO+10
and ECLIPSE or COPERNIC
Together with a long introducer and the VASCO+21 for your SILK+ cases
For High Flow Road Maps
FARGOMAX
FARGOLINE
BRAIDED GUIDING CATHETERS
FARGOMINI 040 (ID:1.02mm/.040’’/3.1F)
SUPER-SUPPLE
PROXIMAL OD – TOTAL
REFERENCE INNER ID DISTAL PART CURVES
DISTAL OD LENGTH (cm)
LENGTH (cm)
FRGMIN4,2F120
FRGMIN4,2F120MP 1.02mm 120 2,5
4,2F-3,9F (.040”)
FRGMIN4,2F135
FRGMIN4,2F135MP 135 1,5 STRAIGHT MULTIPURPOSE
FARGO 058 (ID:1.46mm/.058”/4.4F)
SUPER-SUPPLE
PROXIMAL OD – TOTAL
REFERENCE INNER ID DISTAL PART CURVES
DISTAL OD LENGTH (cm)
LENGTH (cm)
FRG6F105_8
FRG6F105_8MP 105
FRG6F115_8
6,0F-4,9F 1.46mm 115 8
FRG6F115_8MP
(.058")
FRG6F125_8
125 STRAIGHT MULTIPURPOSE
FRG6F125_8MP
FRG6F135_15
135 15
BALT Extrusion continues to manufacture its entire portfolio in France
FRG6F135_15MP
FARGOMAX 070 (ID:1.78mm/.070"/5.3F)
SUPER-SUPPLE
PROXIMAL OD – TOTAL
REFERENCE INNER ID DISTAL PART CURVES
DISTAL OD LENGTH (cm)
LENGTH (cm)
FRGMAX6F95_8
FRGMAX6F95_8MP 95
FRGMAX6F105_8
6,0F-6,0F 1.78mm 105 8
FRGMAX6F105_8MP
(.070”)
FRGMAX6F115_8
115 STRAIGHT MULTIPURPOSE
FRGMAX6F115_8MP
FRGMAX6F125_8 125
FRGMAX6F125_8MP
[Link]
DC026GB 2015/10
The content of this document, in particular data, information, trademarks and logos are BALT EXTRUSION SAS’s
10, rue de la Croix Vigneron (hereinafter “BALT”) sole property. Consequently, all representation and/or reproduction, whether in part or in full, is
95160 Montmorency • France forbidden and would be considered a violation of BALT’s copyrights and other intellectual proprietary rights. This
Tél. : +33 (0)1 39 89 46 41 document with associated pictures are non-contractual and are solely dedicated to healthcare professionals and
Fax : +33 (0)1 34 17 03 46 BALT’s distributors. The products commercialized by BALT shall exclusively be used in accordance with the package
[Link] inserts which have been updated and included in the boxes.
B R A I D E D G U I D I N G C A T H E T E R S
FARGOMINI - FARGO - FARGOMAX
[Link]
B R A I D E D G U I D I N G C A T H E T E R S
FARGOMINI - FARGO - FARGOMAX
FARGOMAX
INNOVATION, ANYWAY
