Scribd
Upload
888 views4 pages

Polishing Procedure For Pipes

The document outlines the polishing procedure for stainless steel pipes to be used in a plant project, including inspecting pipes for defects before polishing, using polishing wheels with specified abrasive materials to polish pipe interiors in stages down to a 400 or 600 grit finish for straight and bent pipes respectively, and inspecting the final polish roughness with a measuring apparatus before approval.

Uploaded by

คุณพ่อน้อง บิ๊กบอส
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
888 views4 pages

Polishing Procedure For Pipes

The document outlines the polishing procedure for stainless steel pipes to be used in a plant project, including inspecting pipes for defects before polishing, using polishing wheels with specified abrasive materials to polish pipe interiors in stages down to a 400 or 600 grit finish for straight and bent pipes respectively, and inspecting the final polish roughness with a measuring apparatus before approval.

Uploaded by

คุณพ่อน้อง บิ๊กบอส
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • General Description
  • Polishing Tools
  • Polishing Procedure
  • Inspect Prior to Polish
  • Inspect the Polishing Roughness

Doc.

No PL-6404-PPP-01
Polishing Procedure for Pipes
Rev. No.: A

TITLE:

POLISHING PROCEDURE FOR PIPES

DOCUMENT NO. : PL—6404-PPP-01

PROJECT NAME : E-401 Pipe Spool in 4TF Plant Project

JOB NO. : 6404-1

OWNER : Mitr Project Services Co., Ltd.

A 16-2-2021 ISSUED FOR REVIWE Mr.Ramin Mr.Jakkrid Mr.Chatchawan

REV. DATE. DESCRIPTION PREPARED CHECKED REVIEWED APPROVED


BY BY BY BY

1|Page
Doc. No PL-6404-PPP-01
Polishing Procedure for Pipes
Rev. No.: A

CONTENTS

Page

1. General Description 3

2. Inspect prior to polish 3

3. Polishing tools 3

4. Polishing procedure 3

5. Inspect the polishing roughness 4

2|Page
Doc. No PL-6404-PPP-01
Polishing Procedure for Pipes
Rev. No.: A

1. General Description
1.1 The dimension of pipes for polishing shall be 8B SCH.80 (O.D219.1 x 12.7t) with the material SA312-
TP 304.
1.2 The inside surface of straight pipe shall be polished to 400#
1.3 The inside surface of bend pipe shall be polished to 600# before bending.

2. Inspect prior to polish


Inspect the surface of pipe, it shall be free of mottling, rut and other defects.

3. Polishing tools
3.1 Polishing wheel, used for rough polish and finishing polishing, is made of cotton cloth, soft cloth,
canvas and some grinding material
3.2 Grinding material shall be aluminum oxide, chrome oxide and shall be iron-free.

4. Polishing procedure
4.1 Polishing procedure (Straight pipe)
4.1.1 Rough polish and the inside surface of pipe shall be cleaned of oxide.
4.1.2 Semi-finishing polish and inside surface of pipe shall be polished to 180#
4.1.3 Finishing polish and inside surface of pipe shall be polished to 320#
4.1.4 Lustering with glazer and inside surface of pipe shall be polished to 400#
4.2 For bend pipe, the procedure is the same as straight pipe before lustering. Prior to lustering, the inside
surface of pipe shall be polished to 600# by MES

3|Page
Doc. No PL-6404-PPP-01
Polishing Procedure for Pipes
Rev. No.: A

5. Inspect the polishing roughness


After polishing, the inspector check whether the rough satisfy the requirements of drawing by rough
measuring apparatus (model: Surtronic 10), and compare with the polishing sample. It shall be re-
polished for sub-quality parts.

Three ample pieces shall be submitted for approval and one piece will be returned to the Vendor after
approval or review with comments. Sample piece size: 100mm x 100mm x 3mm thick.

4|Page

You might also like