PA Dippenaar Investments | No 12 Sophia Rd, West Turffontein | South Africa
Tel : 011 680 2516 | Fax : 011 680 2533 | 0800-CHEMICALS
MATERIAL SAFETY DATA SHEET
(16 POINT MSDS)
Disclaimer and important safety notice
All information is provided in good faith and as accurate as possible. Chemical Techniques will not accept any
liability pertaining to the use of its products, as it is up to the end user “consumer” to determine the correct and safe
use of this product. Kindly study this document prior to using this product or, contact us for additional technical
advice. Please ensure that all personal storing, handling and using this product are properly trained and informed
with regards to any potential dangers and or hazards pertaining to this product. Please ensure that this document is
easily obtainable in the event of an emergency.
Date of issue: Jan 2013 Revised date: Nov 2017 Revision : 3 / 2017
Supplier identification and information
Manufacturer name P.A Dippenaar investments t\a Chemical Techniques
Address of manufacturing 12 Sophia street, West Turffontein , Johannesburg
Gauteng , South Africa
Tel no 011 680-2516 Fax no 011 680-2533
Emergency 083 406 1374 Technical 083 297 1617
Email info@[Link] Email chemicals@[Link]
Supplier quality systems
AN ISO 9001 SYSTEMS CERTIFIED COMPANY
MSDS – Nano Fresh (BEA) / Chemical Techniques / Nov 2017 P1 of 4
1. Product identification
Product name Interlude Bio Maintain CLG - Nano Code 00352
Fresh (BEA)
Chemical /technical nature Super concentrated biological hygiene cleaner & bad odor controller / neutralizer.
Application type Universal “green” cleaner – Septic tank safe
Additional Certification N/a
2. Composition /information on ingredients
Ingredients contributing to hazard Content % Risk-Phrase Safety Phrase
Viable bacillus strain < 20 S26
Enzyme blend / lipase / amylase / protease < 10 S26
Glycol <5 R36 S26
Non-ionic 2AE < 20 R36 S26
Inhibitors / stabilizers / fragrance R36 S26
For detailed risk and safety phrases see .15 of this msds. Please note data are typical of the product and
not a specification or a full composition. The risk profile may change if this product is mixed with other
compounds or as a blend within other components.
Revision of hazardous components based on SABS 0265:1999.
3. Hazard identification
Primary Safety Hazard Can cause irritation to eye
Secondary Safety Hazard N/a
Additional info N/a
4. First aid measures
Inhalation Fresh air
Skin contact Remove contaminated clothing, rinse with water, & or wash with soap. Apply cream to dry skin if
required
Eye contact Rinse with water, keep eye lids open. If discomfort does not subside within 30 minutes seek
further medical attention if required.
Ingestion Do not induce vomiting, keep person calm & seek medical attention.
General notes to the physician and / or medical officer
Never give anything by mouth or induce vomiting to an unconscious person. Treatment of exposure should
be directed at the control of the symptoms and the clinical condition of the patient. Depending on the risk
profile of the product and the patient the symptoms may re-occur and/or change over time. In that event
have the patient consult a physician again.
5. Fire-fighting measures
Extinguishing media Dry powder or foam agent
Specific hazards N/a
6. Accidental release measures
Clean up Dry sand. Discharge in accordance with local regulations.
method FOR SMALL LIQUID SPILLS (< 1 drum), transfer by mechanical means to a labelled, sealable
container for product recovery or safe disposal. Allow residues to evaporate or soak up with an
appropriate absorbent material and dispose of safely. Remove contaminated soil and dispose of
safely.
FOR LARGE LIQUID SPILLS (> 1 drum), transfer by mechanical means such as vacuum truck
to a salvage tank for recovery or safe disposal. Do not flush away residues with water. Retain as
contaminated waste. Allow residues to evaporate or soak up with an appropriate absorbent
material; and dispose of safely. Remove contaminated soil and dispose of safely.
Environmental Do not discharge large volume into sewers
precaution
MSDS – Nano Fresh (BEA) / Chemical Techniques / Nov 2017 P2 of 4
7. Handling and storage
Handling Caution should be taken. Do not decant or use near open flame or any form of heat.
Storage Cool storage, well ventilated, avoid high temperature. Keep container sealed and marked at all
times. Keep away from naked flame.
8. Exposure controls / personal protection
Engineering measures Non-specific requirements
Personal protective equipment Eye protection.
9. Stability and reactivity
Stability Stable under normal cool conditions.
Hazardous decomposition Not known
products
10. Physical and chemical properties
Appearance Non viscous liquid
Color Amber –opaque
Odor / Smell Citrus blend
Other characteristics May separate , shake before use
PH as supplied 6–9
PH @ 1% v/water 7
Boiling Point rage / Degrees C > 100
Melting Point Range / Degrees C N/a
Viscosity @ 20 Degrees / mPa-s N/a
Flashpoint / Degrees C N/a
Auto Ignition Temp / Degrees C N/a
Explosion limits in air % N/a
Vapor pressure @ 20 Degrees C N/a
Specific Gravity - (SG) 1.01 – 1.05
Soluble in water Yes
Soluble in other N/a
Other data / comments No
These data are typical for the product and not a specification
11. Toxicological information / health effects
Inhalation None.
Skin contact Can cause irritation to sensitive skin.
Eye contact May cause irritation.
Ingestion Not tested, no severe symptoms expected.
Specific effects Non known
12. Ecological information
Biodegradability Contains readily biodegradable properties.
This product can be successfully bio-remediated.
Ecotoxicity Non-toxic.
Bioaccumulation Not tested.
MSDS – Nano Fresh (BEA) / Chemical Techniques / Nov 2017 P3 of 4
13. Disposal consideration
In accordance with local regulations. In the event that disposal of material is conducted by a third party please
ensure that the service provider is authorized and reputable. Please contact the manufacturer for additional
information if required.
Material Disposal Recover or recycle if possible. It is the responsibility of the waste generator to determine
the toxicity and physical properties of the material generated to determine the proper
waste classification and disposal methods in compliance with applicable regulations.
Container Disposal Drain container thoroughly. After draining, vent in a safe place away
from sparks and fire. Refer to Section 7 before handling the product or
containers. Residues may cause an explosion hazard if heated above the flash point. Do
not puncture, cut or weld unclean drums. Send to drum recoverer or metal reclaimer.
Local Legislation Disposal should be in accordance with applicable regional, national, and local laws and
regulations. Local regulations may be more stringent than regional or national
requirements and must be complied with.
14. Transport information / road and rail only
Transport type UN No Class Item
ADR/RID - 9 -
(Road/Rail)
Additional transport May cause slippery spill
information
15. Regulatory information / EEC classification
Warning phrase Caution Symbol
R-phrase Can cause irritation to eye R36
S-phrase Keep out of children reach S2
Keep container closed S7
When using do not eat or drink S20
Avoid contact with eyes S25
In case of contact wash eye with water S26
If swallowed seek medical advise S46
Product contains Natural microbes & surfactants
Additional information No
16. Other information
General info Personnel using this product must be trained and advised on the best, safest and
most effective means of application.
Issued by R.P DIPPENAAR Signed
MSDS – Nano Fresh (BEA) / Chemical Techniques / July 2017 P4 of 4
