TDA7265B

30 W + 30 W stereo amplifier with mute and standby

Features
■ Wide-range supply voltage (up to ± 35 V ABS
max.)
■ Split supply
■ High output power
■ 30 W + 30 W at THD=10%, RL = 8 Ω, VS ± 23 V
■ 25 W + 25 W at THD=1%, RL = 8 Ω, VS ± 23 V
■ No “pop” at turn-on/off Multiwatt11 (vertical)
■ Mute (“pop-free”) applications such as home entertainment
■ Standby feature (low IQ) systems and stereo TV sets.
■ Short-circuit protection The device is pin-to-pin compatible with the
■ Thermal overload protection TDA7265, TDA7269A and TDA7292.

Description Table 1. Device summary

The TDA7265B is class-AB dual audio power Order code Package Packing
amplifier assembled in the Multiwatt package,
TDA7265B Multiwatt11 (vertical) Tube
especially designed for high-quality sound

Figure 1. Typical application circuit in split supply

+VS

1000μF
15K 1µF
MUTE/
ST-BY 3
5
IN (L) 7
+ 4 OUT (L)
1µF -
18K 4.7Ω
RL (L)
8 IN- (L)
100nF
15K 18K
GND 9 560Ω
+5V µP
10 IN- (R) 560Ω

18K
1µF - 2 OUT (R)
IN (R) 11
+
4.7Ω
1 6 RL (R)
-VS 100nF

1000mF
D94AU085

December 2011 Doc ID 022601 Rev 1 1/18

www.st.com 1
Contents TDA7265B

Contents

1 Pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Electrical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Typical operating characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

4 Mute standby function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.1 Stereo configuration circuit and PCB layout . . . . . . . . . . . . . . . . . . . . . . . 11
5.2 Application suggestions for stereo configuration . . . . . . . . . . . . . . . . . . . 13
5.3 Single supply circuit configuration and PCB layout . . . . . . . . . . . . . . . . . 14

6 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2/18 Doc ID 022601 Rev 1

TDA7265B List of tables

List of tables

Table 1. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Table 2. Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table 3. Thermal data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table 4. Electrical characteristcs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Table 5. Recommended values of the external components in the TDA7265B demonstration
board schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 6. Mute, standby truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Table 7. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Doc ID 022601 Rev 1 3/18

List of figures TDA7265B

List of figures

Figure 1. Typical application circuit in split supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Figure 2. Pin connections (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Figure 3. Quiescent current vs. supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 4. Frequency response . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 5. THD vs. output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 6. Output power vs. supply voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Figure 7. Quiescent current vs. pin 5 voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 8. Attenuation vs. pin 5 voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 9. Crosstalk vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 10. Power dissipation vs. output power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Figure 11. Mute/standby thresholds on pin 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 12. Test and application circuit (stereo configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 13. Soldering side (bottom). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 14. Component side (top) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 15. Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 16. Typical application circuit in single supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Figure 17. Soldering side (bottom). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Figure 18. Component side (top) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 19. Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 20. Multiwatt 11 (vertical) mechanical data & package dimensions . . . . . . . . . . . . . . . . . . . . . 16

4/18 Doc ID 022601 Rev 1

TDA7265B Pin connections

1 Pin connections

Figure 2. Pin connections (top view)

11 IN+(1)
10 IN-(1)
9 GND
8 IN-(2)
7 IN+(2)
6 -VS
5 MUTE/St-By
4 OUTPUT(2)
3 +VS
2 OUTPUT(1)
1 -VS

TAB CONNECTED TO PIN 6 D95AU316

Doc ID 022601 Rev 1 5/18

Electrical specifications TDA7265B

2 Electrical specifications

2.1 Absolute maximum ratings

Table 2. Absolute maximum ratings
Symbol Description Value Unit

VS DC supply voltage ±35 V

IO Output peak current (internally limited) 5 A
Ptot Power dissipation Tcase = 70 °C 40 W
Top Operating temperature -20 to 85 °C
Tstg, Tj Storage and junction temperature -40 to +150 °C

2.2 Thermal data

Table 3. Thermal data
Symbol Parameter Value Unit

Rth j case Thermal resistance junction-casetyp. 1.5 °C/W

2.3 Electrical characteristics

Refer to the test circuit, VS = ± 23 V; RL = 8 Ω; Rs = 50 Ω; GV = 30 dB; f = 1 kHz;
Tamb = 25 °C, unless otherwise specified.

Table 4. Electrical characteristcs

Symbol Parameter Test condition Min. Typ. Max. Unit

VS Supply range ±8 ±33 V

Iq Total quiescent current 50 130 mA
VOS Input offset voltage –20 +20 mV
Ib Non-inverting input bias current 500 nA
THD = 10%; RL = 8 Ω 30 W
PO Output power
THD = 1%; RL = 8 Ω 25 W
IPeak Output peak current (Internally limited) 3.6 4 A
THD Total harmonic distortion RL = 8 Ω, Po = 1 W 0.02 %
CT Crosstalk f = 1 kHz 70 dB
SR Slew rate 11 V/ms
Gol Open-loop voltage gain 80 dB
eN Total input noise F = 20 Hz – 22 kHz 4 µV
Ri Input resistance 20 kΩ

6/18 Doc ID 022601 Rev 1

TDA7265B Electrical specifications

Table 4. Electrical characteristcs (continued)

Symbol Parameter Test condition Min. Typ. Max. Unit

SVR Supply voltage rejection 75 dB

Tj Thermal shutdown 145 °C

Mute function { ref.: +Vs }

VTmute Mute / play threshold -7 -6 -5 V

Am Mute attenuation 75 dB

Standby function { ref.: +Vs }

VTst-by Standby / mute threshold -3.5 -2.5 -1.5 V

Ast-by Standby attenuation 110 dB
Iq Quiescent current at standby 8 mA

Doc ID 022601 Rev 1 7/18

Typical operating characteristics TDA7265B

3 Typical operating characteristics

Figure 3. Quiescent current vs. supply Figure 4. Frequency response

voltage
Iq (mA) Ampl (dB)
55 +5

+4
Vs=+/-23V
50
+3 Rl = 8 Ohm
Iq+
+2 0dB = 1W
45
+1

+0
40
Iq-
-1

-2
35
-3

30 -4

8 10 12 14 16 18 20 22 24 26 28 30 32 34 -5
10 20 50 100 200 500 1k 2k 5k 10k 20k 50k 200k
Vs (+/-V) Freq(Hz)

Figure 5. THD vs. output power Figure 6. Output power vs. supply voltage
THD (%) Pout (W)
10
50
5
45
Vs= +/-23V Rl = 8 Ohm
2 Rl= 8 Ohm 40 f = 1Kz
35
1

30 THD=10%
0.5
25
0.2 f = 15KHz 20
0.1
15
0.05 10 THD=1%

f = 1KHz 5
0.02

0
0.01
100m 200m 500m 1 2 5 10 20 40 10 12 14 26 28 20 22 24 26 28 30
Pout (W) Vs (+/-V)

8/18 Doc ID 022601 Rev 1

TDA7265B Typical operating characteristics

Figure 7. Quiescent current vs. pin 5 voltage Figure 8. Attenuation vs. pin 5 voltage

Iq (mA) Attenuation (dB)

100 +10

90 +0

80 -10

70 -20 Vs= +/-20V

Vs=+/-20V
60 -30 Rl= 8 Ohm
Rl=8Ohm
50 -40 f =1KHz
0V = +Vs
40 Vi = 0 -50 OdB = 1V
30 -60 0V = +Vs
20 -70

10 -80

0 -90
-10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 -100
Vpin # 5 (V) -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 -0
Vpin #5 (V)

Figure 9. Crosstalk vs. frequency Figure 10. Power dissipation vs. output power
Crosstalk (dB)
Pdiss (W)
-30
40
-35
35 Rl =8 Ohm
Vs=+/- 26V A
-40 f = 1KHz
Rl = 8 Ohm 30 Vs= +/- 24V (A)
-45 Rs= 50 Ohm Vs= +/-20V (B)
25
-50

-55
20
Right to
B
-60 Left 15

-65 10

-70 5
Left to Right
-75 0
0.1 1 10 100
-80
20 50 100 200 500 1k 2k 5k 10k 20k
2xPout (W)

Frequency (Hz)

Doc ID 022601 Rev 1 9/18

Mute standby function TDA7265B

4 Mute standby function

Pin 5 (MUTE/St-By) controls the amplifier status using two different thresholds with
reference to +VS :
● when Vpin5 is greater than or equal to +VS - 2.5 V, the amplifier is in standby mode and
the final stage generators are off
● when Vpin5 is between +VS - 2.5V and +VS 6 V, the final stage current generators are
switched on and the amplifier is in mute mode
● when Vpin5 is less than +VS - 6 V, the amplifier is in play mode.

Figure 11. Mute/standby thresholds on pin 5

+VS
(V)

26

-VS
-26

VIN
(mV)

Vpin5
(V)

VS
VS-2.5
VS-6
VS-10

Iq
(mA)

VOUT
(V)

OFF PLAY STDBY PLAY OFF

STDBY STDBY

MUTE D04AU1570 MUTE MUTE MUTE

10/18 Doc ID 022601 Rev 1

TDA7265B Applications

5 Applications

5.1 Stereo configuration circuit and PCB layout

Figure 12. Test and application circuit (stereo configuration)
+VS

C4 C5
R2 C3 +VS
MUTE/
ST-BY 3
5
R1 Q1 IN (L) 7
+ 4 OUT (L)
SW1 C1 -
ST-BY DZ R5 R7
RL (L)
8 IN- (L)
C8
R4 R3
GND 9 R6

SW2 10 IN- (R) R9

MUTE
R8
C2 - 2 OUT (R)
IN (R) 11
+
R10
1 6 RL (R)
-VS C9

C7 C6
D94AU087B

Figure 13. Soldering side (bottom)

Doc ID 022601 Rev 1 11/18

Applications TDA7265B

Figure 14. Component side (top)

Figure 15. Components

12/18 Doc ID 022601 Rev 1

TDA7265B Applications

5.2 Application suggestions for stereo configuration

The recommended values of the external components are those shown in the application
circuit of Figure 12. If different values are used, the following table can be helpful.

Table 5. Recommended values of the external components in the TDA7265B demonstration

board schematic
Recomm. Larger than Smaller than
Component Purpose
value recommended value recommended value
R1 10 kΩ Mute circuit Increase of Dz biasing current
R2 15 kΩ Mute circuit Vpin # 5 shifted downward Vpin # 5 shifted upward
R3 18 kΩ Mute circuit Vpin # 5 shifted upward Vpin # 5 shifted downward
R4 15 kΩ Mute circuit Vpin # 5 shifted upward Vpin # 5 shifted downward
R5, R8 18 kΩ Increase of gain
Closed-loop gain setting(1)
R6, R9 560 Ω Decrease of gain
R7, R10 4.7 Ω Frequency stability Danger of oscillations Danger of oscillations
C1, C2 1 µF Input DC decoupling Higher low-frequency cutoff
C3 1 µF St-By/Mute time constant Larger on/off time Smaller on/off time
C4, C6 1000 µF Supply voltage bypass Danger of oscillations
C5, C7 0.1 µF Supply voltage bypass Danger of oscillations
C8, C9 0.1 µF Frequency stability
Dz 5.1 V Mute circuit
Q1 BC107 Mute circuit
1. Closed-loop gain has to be ≥ 29 dB

Table 6. Mute, standby truth table

SW1 SW2
B A Standby
B B Standby
A A Mute
A B Play

Doc ID 022601 Rev 1 13/18

Applications TDA7265B

5.3 Single supply circuit configuration and PCB layout

Figure 16. Typical application circuit in single supply
+VS
D1 5.1V

R1 C1 R3 C5 C6
10K 1μF 15K 1000μF 0.1μF
MUTE 3
5
PLAY
5V Q1 IN (L) 7 C9 470μF
BS107 + 4 OUT (L)
0 C3 1μF -
MUTE R2 R4 R8 OUT
15K 30K 4.7Ω (L)
8 IN- (L)
C7
9 0.1μF
C2 R5
100μF C4 1μF 1K
IN (R) 11 + C10 470μF
2 IN- (R)
-
R6 R9 OUT
30K 4.7Ω (R)
10 OUT (R)
C8
0.1μF
1 6 R7
1K
GND
D96AU444A

Figure 17. Soldering side (bottom)

14/18 Doc ID 022601 Rev 1

TDA7265B Applications

Figure 18. Component side (top)

Figure 19. Components

Doc ID 022601 Rev 1 15/18

Package mechanical data TDA7265B

6 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.

Figure 20. Multiwatt 11 (vertical) mechanical data & package dimensions

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX. OUTLINE AND
A 5 0.197 MECHANICAL DATA
B 2.65 0.104
C 1.6 0.063
D 1 0.039
E 0.49 0.55 0.019 0.022
F 0.88 0.95 0.035 0.037
G 1.45 1.7 1.95 0.057 0.067 0.077
G1 16.75 17 17.25 0.659 0.669 0.679
H1 19.6 0.772
H2 20.2 0.795
L 21.9 22.2 22.5 0.862 0.874 0.886
L1 21.7 22.1 22.5 0.854 0.87 0.886
L2 17.4 18.1 0.685 0.713
L3 17.25 17.5 17.75 0.679 0.689 0.699
L4 10.3 10.7 10.9 0.406 0.421 0.429
L7 2.65 2.9 0.104 0.114
M 4.25 4.55 4.85 0.167 0.179 0.191
M1 4.73 5.08 5.43 0.186 0.200 0.214
S 1.9 2.6 0.075 0.102
S1 1.9 2.6 0.075 0.102
Multiwatt11 (Vertical)
Dia1 3.65 3.85 0.144 0.152

0016035 H

16/18 Doc ID 022601 Rev 1

TDA7265B Revision history

7 Revision history

Table 7. Document revision history

Date Revision Changes

19-Dec-2011 1 Initial release.

Doc ID 022601 Rev 1 17/18

 TDA7265B

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2011 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

18/18 Doc ID 022601 Rev 1