Product Information

TORZEN® U4820L NC01 PA66 Resin

Product Description
Properties (dry) Value Units Method
TORZEN® U4820L NC01 is a general purpose
Density 1.14 g/cm3 ISO 1183 PA66 resin suitable for injection molding and
Mold Shrinkage, 2.0 mm, Parallel 1.9 % ISO 294-4 extrusion applications where fast cycles are
Physical

required. It is lubricated internally and

Mold Shrinkage, 2.0 mm, Transverse 1.8 % ISO 294-4
externally for excellent machine feed and mold
Water Absorption - 24 hours 1.4 % ISO 62 release. Available in natural and black.
Water Absorption - Equilibrium @ 50% RH 2.7 % ISO 62
Tensile Strength at Yield (50 mm/min) 82 MPa ISO 527 General Information
Tensile Strength at Break - MPa ISO 527 Material Status
Commercial: Active
Elongation at Yield 4.2 % ISO 527
Elongation at Break 50 % ISO 527 Availability
North America, South America, Europe, Asia
Tensile Modulus (1 mm/min) 3200 MPa ISO 527
Mechanical

Features
Flexural Modulus 2900 MPa ISO 178
Good color retention and processability
Flexural Strength 95 MPa ISO 178
RoHS
Notched Charpy at 23°C 5.5 kJ/m2 ISO 179
No intentional additives or ingredients used in
Notched Charpy at -30°C 4.3 kJ/m2 ISO 179 TORZEN® U4820L NC01 are among those in the
European directive 2011/65/EC (RoHs2), as amended.
Unnotched Charpy at 23°C NB kJ/m2 ISO 179
2
Unnotched Charpy at -30°C 310 kJ/m ISO 179
2
Process Guidelines for Molding
Notched Izod at 23°C 5.4 kJ/m ISO 180
Drying Temperature 80 oC
Melting Temperature, 10°C/min 261 °C ISO 11357 Drying Time* 3 - 4 hours
HDT at 0.45 MPa 204 °C ISO 75 Barrel Temperatures
Thermal

HDT at 1.82 MPa 66 °C ISO 75 Rear 250 - 270 oC

Middle 270 - 290 oC
CLTE, 2.0 mm, Parallel, 23 - 55 °C 0.8 10-4/°C ISO 11359-2
Front 270 - 290 oC
CLTE, 2.0 mm, Transverse, 23 - 55 °C 0.8 10-4/°C ISO 11359-2
Nozzle 270 - 290 oC
Surface Resistivity 3E+14 ohms IEC 60093 Processing Temperature (melt) 280 - 300 oC
Electrical

Volume Resistivity, 2.0 mm 4E+14 ohm-cm IEC 60093 Mold Temperature 50 - 90 oC

Dielectric Strength, 1.0 mm 32 kV/mm IEC 60243 Back Pressure** 2 - 10 bar
Comparative Tracking Index, 3.0 mm 600 volts IEC 60112 Vent Depth 0.007 - 0.04 mm
Cushion (range) 4 - 6 mm
Flammability Classification (0.40 mm) V-2 –– UL 94
Suggested Moisture (max) 0.18 wt%
Glow Wire Flammability Index (0.71 mm) 960 °C IEC 60695-2-12
Suggested Moisture (min) 0.08 wt%
Flammability

Glow Wire Flammability Index (1.5 mm) 960 °C IEC 60695-2-12 Screw Speed 75 - 180 rpm
Glow Wire Flammability Index (3.0 mm) 960 °C IEC 60695-2-12
* Initial moisture below 0.25 wt%. Use dehumidified air.
Glow Wire Ignition Temperature (0.71 mm) 960 °C IEC 60695-2-13 ** Melt pressure
Glow Wire Ignition Temperature (1.5 mm) 900 °C IEC 60695-2-13 INVISTA Engineering Polymer Solutions
Glow Wire Ignition Temperature (3.0 mm) 750 °C IEC 60695-2-13 Additional Information: epsinfo@[Link]
Issue Date: January 2015

Product Data Sheet Disclaimer

This Product Data Sheet contains selected information about a specific INVISTA product, or group of products, and particular uses of the same. It relates only to the identified product and any
identified uses, and is based on information available as of the date hereof. Additional information may be needed to evaluate other uses of the product, including use of the product in combination
with any materials or in any processes other than those specifically referenced. Information provided herein with respect to any hazards that may be associated with the product is not meant to
suggest that use of the product in a given application will necessarily result in any exposure or risk to workers or the general public. THIS PRODUCT DATA SHEET DOES NOT CONTAIN A COMPLETE
STATEMENT OF, AND DOES NOT CONSTITUTE A REPRESENTATION, WARRANTY OR GUARANTY WITH REGARD TO, A PRODUCT'S CHARACTERISTICS, USES, QUALITY, MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR THE SUITABILITY, SAFETY, EFFICACY, HAZARDS OR HEALTH EFFECTS OF THE PRODUCT, WHETHER USED SINGULARLY OR IN COMBINATION WITH
ANY OTHER PRODUCT, EXCEPT TO THE EXTENT REQUIRED BY THE RELEVANT LAW AND REGULATIONS. Purchasers and users of the product are responsible for determining that the product is
suitable for the intended use and that their workers and the general public are advised of any risks resulting from such use. Nothing contained in this Product Data Sheet shall be construed to
modify any of the commercial terms pursuant to which the product was sold by INVISTA including, but not limited to, terms and conditions addressing each party's respective rights and obligations
with regard to warranties, remedies and indemnification.
If purchasers and users believe or have reason to believe that the Product Data Sheet or other information provided to them by INVISTA is inaccurate or in any way insufficient for any purpose,
they should immediately notify INVISTA of the same, and of the basis for their belief (for example, studies, data, reports of incidents, etc.) so that INVISTA can determine whether modification or
supplementation of the Product Data Sheet, or other measures, are appropriate. Failure of purchasers and users to timely provide such notice shall be deemed a waiver by purchasers and users of
any and all claims, demands or causes of action, including causes of action based on an alleged failure to warn, for personal injury or damage to the environment or property arising from or
attributable to the use of product.
This disclaimer shall be effective to the extent allowed by law. Should any provision be deemed to be ineffective or unenforceable, that provision shall be deemed severed from the disclaimer and
the remaining provisions shall continue to have full force and effect.

TORZEN®, INVISTA and design are trademarks of INVISTA. ©2011 INVISTA.

[Link]