Trelleborg Ag Tire Databook
Trelleborg Ag Tire Databook
Technical Manual
Drive wheel tires
TM1000 High Power 8
Radial
TM900 High Power 12
TM800 20
TM800 High Speed 28
TM700 33
Tractors and TM700 43
combine harvesters TM700 High Speed 45
TM600 47
TM190 60
TM100 63
Marshland 69
TM300S 71
TM3000 73
Combine harvesters
TM2000 74
Implement tires
Trailers and Twin Radial 96
Radial
agricultural machines
Forestry harvester, Twin Forestry: T404 - T414 - T421 SB - T422 SB - T428 SB 170
forwarder & skidder
Excavator, material handling Industrial Tractor: T459 - T409 - T422 EXC - T428 EXC 196
& other machines
Agriculture, Industry, T49 - T63 - T94 - T411 - T412 - T413 - T415 - T421 - T430
Cross-ply Grassland, T439 - T446 - T448 - T462 - T463 - T501 - T510 - T513
Snow & High Speed T514 - T521 - T522 - T523 - T528 - T530 - T533 - T536
from 3” to 16” T537 - T539 - T550 - T559 Turf Grip - T560 ICE - T570
H700 - T690 - T991 - HIGH GRIP - TRACTION
Trelleborg is a global industrial group whose leading positions are based on advanced polymer
technology and in-depth applications know-how. Trelleborg develops high-performance solutions
that seal, damp and protect in demanding industrial environments. The Trelleborg Group had
annual sales during 2011 of approximately SEK 22 billion ($ 3.3 billion), with around 15.500
employees in over 40 countries. The Group comprises three business areas: Trelleborg Sealing
Solutions, Trelleborg Wheel Systems and Trelleborg Engineered Systems. The Trelleborg share has
been listed on the Stockholm Stock Exchange since 1964 and is listed on the OMX Nordic List,
Large Cap. www.trelleborg.com.
4 5
Range and applications
Range TM1000 TM900 TM800 TM800 TM700 TM700 TM600 TM100 TM190 Marshland TM2000 Twin Twin Twin Twin Twin Agro Implement Light TH400 TB40
High Power High Power High Speed High Speed Radial Tractor Implement AMPT Forestry Forest Standard Service AgroIndustrial Backhoe
HP (for FWD tractor) 270-450 250-400 80-260 120-260 40-240 120-180 50-180 30-80 150-310 80-200
Max Speed (Km/h) 70 50-70 70 70 50 70 50 40 50 50 40 70 50 50 70 40 50 50 40-70 50 40
Construction Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Radial Cross-Ply Cross-Ply Cross-Ply Cross-Ply Cross-Ply Cross-Ply Cross-Ply Radial Cross-Ply
Field application
l l l m l m l l m l l
(High torque value)
Field application
l l l m l m l l m l l
(Medium torque value)
Field-bed preparation
l l l m l m m l m l m
(Low torque value)
Transport on road
l l l l l
(High speed)
TRACTOR SERVICE
Transport on road
l l l l m l m l
(Max 50 mph)
High load on front axels l l l l l
Orchard – Vineyard l m l
Grassland l l l l
Harvesting l l m
IMPLEMENT SERVICE
Forestry l m
Trailer on Road l m l m m
Trailer on Field l l l l l
Implement Machine l l l l l
Farm Service
AGRO - INDUSTRIAL
Telehandler l m
Backhoe Loader
Compact Wheel Loader
Construction Service
Telehandler
m l
Backhoe Loader
Compact Wheel Loader
TM1000 HP
inches inches inches inches
750
RIM
DW21B
Permitted Rims
DW20B
Type
TUBELESS
Tube
rolling resistance and a very long life on Footprint Area inch 467
2 Tread depth 69/32 Weight lb 451.07
the road, come together to make TM1000 psi 6 9 12 15 17 20 23
High Power the most efficient solution for New bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Ultra High Powered tractors. MAX. LOAD lb
Up to 40 mph (*) 6170 7040 7910 8790 9650
T h e n ew c a r c a s s , e n g i n e e r e d w i t h Field Service (*) 6170 7040 7910 8790 9650
Technology, ensures SIZE Dual Fitment 3910 4670 5430 6210 6970 7730 8490
premium farming productivity by providing IF 600/70R30 159D
an extra wide foot-print and low soil IF 650/60R34 159D
compaction. IF 650/65R34 161D
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
IF 710/60R34 164D Pattern inches inches inches inches
Developed to fully respect the environment, IF 650/65R34
IF 710/70R42 179D TM1000 HP 25.6 67.7 29.5 201 825 DW23B TUBELESS
the TM1000 High Power 161D
is the perfect solution for sustainable farming. IF 710/75R42 176D Footprint Area inch2 579 Tread depth 72/32 Weight lb 471.79
IF 900/60R42 180D psi 6 9 12 15 17 20 23
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6
MAX. LOAD lb
Up to 40 mph (*) 6740 7650 8560 9380 10200
Field Service (*) 6740 7650 8560 9380 10200
Dual Fitment 4220 5030 5930 6740 7540 8260 8970
Footprint Area inch - 2 Tread depth 69/32 Weight lb 500.45 Footprint Area inch - 2 Tread depth 81/32 Weight lb 954.60
psi 6 9 12 15 17 20 23 psi 6 9 12 15 17 20 23
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6
MAX. LOAD lb MAX. LOAD lb
Up to 40 mph (*) 7050 8050 9040 10030 11020 Up to 40 mph (*) 11290 12870 14460 16050 17640
Field Service (*) 7050 8050 9040 10030 11020 Field Service (*) 11290 12870 14460 16050 17640
Dual Fitment 4460 5340 6220 7090 7960 8830 9700 Dual Fitment 7140 8540 9940 11330 12730 14130 15520
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SW = On the nominal RIM. (Not referred to the PERMITTED RIMS)
Pattern inches inches inches inches
(*) = Single mounting
IF 710/70R42 SRI = Speed Radius Index - value to be used for the calculation of the theoretical tractor speed during European Union homologation and for the
179D TM1000 HP 28.9 81.1 36.2 243.7 975 DW25B TUBELESS interchangebility of different Tire sizes.
Footprint Area inch 742 2 Tread depth 83/32 Weight lb 809.4 Below 0.8 Bar only for low torque application.
For intensive road transport above 40 mph the pressure could be increased up to 0.4 bar.
psi 6 9 12 15 17 20 23 26 29 32 35 All load value for ground slopes up to 20% (above 20% consult TWS).
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2 2.2 2.4
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
MAX. LOAD lb
Up to 40 mph (*) 9230 10590 11960 13330 14690 15300 15900 16490 17090
Field Service (*) 9230 10590 11960 13330 14690 15300 15900 16490 17090
Dual Fitment 5800 7000 8120 9330 10530 11730 12940 13460 13990 14520 15040
TM900 HP
inches inches inches inches
725
RIM
DW18L
Permitted Rims
DW20B
Type
TUBELESS
Tube
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
600/70R34 710/60R34
TM900 HP 23.6 66.3 29.7 201 800 DW18L DW20B - W18L TUBELESS TM900 HP 28.1 66.9 30.5 201.8 825 DW23B TUBELESS
160D (157E) 164D (161E)
Footprint Area inch2 385 Tread depth 69/32 Weight lb 432.05 Footprint Area inch2 427 Tread depth 69/32 Weight lb 485.68
psi 9 12 15 17 20 23 29 35 psi 9 12 15 17 20 23 29 35
bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4 bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4
MAX. LOAD lb MAX. LOAD lb
43 mph S 5600 6320 7040 7830 8490 9090 43 mph S 6230 6930 7750 8470 9490 10200
40 mph S 6150 6940 7740 8540 9330 9920 40 mph S 6720 7500 8380 9150 10250 11020
30 mph S 4890 5620 6460 7300 8120 8820 9790 10470 30 mph S 5320 6140 7070 7870 8800 9610 10770 11570
25 mph S 5100 5860 6740 7610 8480 9370 10210 11020 25 mph S 5560 6400 7360 8210 9180 10020 11230 12070
20 mph S 5360 6160 7080 7990 8900 9920 10730 11350 20 mph S 5830 6720 7740 8620 9630 10530 11790 12680
5 mph LT S 6100 7000 8040 9230 10420 11610 12790 13890 5 mph LT S 6830 7870 9060 10100 11290 12330 13810 14850
5 mph HT S 5360 6160 7080 7990 8900 9920 10730 11350 5 mph HT S 5830 6720 7740 8620 9630 10530 11790 12680
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
650/85R38 900/60R38
TM900 HP 27.9 81.5 35.8 244.9 975 DW23B TUBELESS TM900 HP 35.6 80.3 36 243.3 975 DW28B DW27B - DW30B TUBELESS
173D (170E) 178D (175E)
Footprint Area inch2 549 Tread depth 82/32 Weight lb 768.77 Footprint Area inch2 705 Tread depth 78/32 Weight lb 898.77
psi 9 12 15 17 20 23 29 35 psi 9 12 15 17 20 23 29 35
bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4 bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4
MAX. LOAD lb MAX. LOAD lb
43 mph S 8200 9260 10320 11380 12430 13230 43 mph S 9280 10350 11560 12630 14150 15210
40 mph S 8880 10030 11180 12320 13470 14330 40 mph S 10090 11240 12570 13720 15380 16530
30 mph S 7080 8130 9340 10540 11740 12940 14150 15050 30 mph S 7990 9200 10590 11810 13190 14420 16150 17360
25 mph S 7390 8480 9730 10990 12250 13500 14760 15700 25 mph S 8330 9600 11050 12310 13770 15040 16840 18110
20 mph S 7750 8910 10220 11540 12860 14180 15500 16480 20 mph S 8750 10090 11610 12930 14450 15780 17690 19010
5 mph LT S 9080 10440 11980 13530 15070 16610 18150 19310 5 mph LT S 10250 11810 13590 15150 16930 18500 20720 22280
5 mph HT S 7750 8910 10220 11540 12860 14180 15500 16480 5 mph HT S 8750 10090 11610 12930 14450 15780 17690 19010
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment.
43/40/30/25/20 mph = On road transport at 43/40/30/25/20 SRI = Speed Radius Index - value to be used for the calculation of the
mph. For intensive road transport at 25, 30, 40 and 43 mph the theoretical tractor speed during European Union homologation and for
pressure should be increased by 6 psi. the interchangebility of different Tire sizes.
5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value.
5 mph HT = Maximum speed 5 mph. Field application with high torque value.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
TM800 SIZE
440/65R24
Pattern inches inches inches inches
575
RIM
DW14L
Permitted Rims
TUBELESS
Tube
14.9-24
128D DW13 - DW15L(°) TR218
Footprint Area inch2 193 Tread depth 57/32 Weight lb 157.09 H (*)
ED
D-RAmT ph psi 9 12 15 17 20 23 26 28 30
40 bar
MAX. LOAD lb
0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
Footprint Area inch2 274 Tread depth 63/32 Weight lb 249.78 H (*) Footprint Area inch2 257 Tread depth 59/32 Weight lb 221.01 H (*)
psi 12 15 17 20 23 29 35 38 41 psi 9 12 15 17 20 23 26 28 30
bar 0.8 1.0 1.2 1.4 1.6 2 2.4 2.6 2.8 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
25 mph S 3640 4170 4630 5090 5490 6080 6610 40 mph S 2870 3320 3760 4160 4550 4940
20 mph S 3900 4460 4960 5460 5880 6510 7080 30 mph S 3010 3480 3950 4370 4770 5190
5 mph LT S 4950 5680 6310 6930 7470 8280 8990 9450 9920 25 mph S 3140 3630 4110 4550 4980 5410
5 mph HT S 3900 4460 4960 5460 5880 6510 7080 20 mph S 3300 3810 4320 4770 5220 5690
5 mph Cyc S 5500 6290 7000 7690 8290 9190 9990 10640 11240 5 mph LT S 3900 4510 5110 5640 6180 6720 7190 7410 8400
5 mph HT S 3300 3810 4320 4770 5220 5690
For harvesting applications
Tread SW OD SLR RC SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
SIZE Pattern inches inches inches inches SRI RIM Permitted Rims Type Tube Pattern inches inches inches inches
Footprint Area inch2 295 Tread depth 63/32 Weight lb 255.00 H (*) Footprint Area inch2 296 Tread depth 63/32 Weight lb 269.44 H (*)
psi 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
40 mph S 3300 3810 4320 4770 5220 5680 40 mph S 3400 3920 4440 4920 5380 5840
30 mph S 3460 4000 4530 5020 5490 5960 30 mph S 3560 4110 4660 5160 5640 6140
25 mph S 3620 4170 4730 5220 5720 6220 25 mph S 3710 4290 4870 5380 5890 6400
20 mph S 3790 4380 4970 5490 6010 6540 20 mph S 3900 4510 5110 5640 6180 6720
5 mph LT S 4490 5180 5880 6490 7110 7730 8260 8520 9660 5 mph LT S 4620 5320 6040 6680 7320 7950 8500 8760 9930
5 mph HT S 3790 4380 4970 5490 6010 6540 5 mph HT S 3900 4510 5110 5640 6180 6720
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
Footprint Area inch2 224 Tread depth 57/32 Weight lb 177.03 H (*) Footprint Area inch2 369 Tread depth 66/32 Weight lb 327.34 H (*)
psi 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
40 mph S 2500 2890 3270 3620 3960 4300 40 mph S 3950 4550 5170 5710 6250 6780
30 mph S 2620 3030 3440 3790 4160 4520 30 mph S 4140 4780 5420 6000 6570 7130
25 mph S 2730 3160 3580 3960 4330 4720 25 mph S 4320 4980 5650 6250 6850 7440
20 mph S 2880 3320 3760 4160 4550 4950 20 mph S 4530 5240 5940 6570 7190 7820
5 mph LT S 3400 3920 4450 4920 5380 5850 6250 6450 7310 5 mph LT S 5360 6190 7020 7760 8500 9240 9880 10190 11550
5 mph HT S 2880 3320 3760 4160 4550 4950 5 mph HT S 4530 5240 5940 6570 7190 7820
540/65R30 W15L(°) - W16L - W18L 18.4-30 540/65R38 W15L(°) - W16L - W18L 18.4-38
TM800 20.9 57.6 26.2 173.2 700 DW16L TUBELESS TM800 20.9 65.6 29.9 197.2 800 DW16L TUBELESS
143D DW15L(°) - DW18L TR218 147D DW15L(°) - DW18L TR218
Footprint Area inch2 306 Tread depth 63/32 Weight lb 282.32 H (*) Footprint Area inch2 346 Tread depth 63/32 Weight lb 347.14 H (*)
psi 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
40 mph S 3490 4030 4570 5050 5530 6010 40 mph S 3950 4550 5170 5710 6250 6790
30 mph S 3660 4230 4800 5300 5810 6320 30 mph S 4140 4780 5420 6000 6570 7130
25 mph S 3820 4410 5000 5530 6060 6580 25 mph S 4320 4980 5650 6250 6850 7440
20 mph S 4010 4630 5260 5810 6360 6910 20 mph S 4530 5240 5940 6570 7190 7820
5 mph LT S 4740 5480 6220 6870 7520 8180 8740 9020 10220 5 mph LT S 5360 6190 7020 7760 8500 9240 9880 10190 11550
5 mph HT S 4010 4630 5260 5810 6360 6910 5 mph HT S 4530 5240 5940 6570 7190 7820
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
Footprint Area inch2 332 Tread depth 63/32 Weight lb 308.17 H (*) Footprint Area inch2 411 Tread depth 69/32 Weight lb 395.13 H (*)
psi 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
40 mph S 3710 4290 4860 5380 5890 6390 40 mph S 4680 5410 6140 6780 7430 8070
30 mph S 3900 4510 5100 5640 6180 6710 30 mph S 4920 5680 6450 7120 7800 8480
25 mph S 4070 4700 5320 5890 6450 7010 25 mph S 5130 5930 6720 7430 8130 8840
20 mph S 4270 4930 5590 6180 6770 7350 20 mph S 5390 6230 7050 7800 8540 9280
5 mph LT S 5050 5830 6610 7310 8000 8700 9300 9590 10870 5 mph LT S 6370 7350 8340 9230 10100 10980 11740 12100 13720
5 mph HT S 4270 4930 5590 6180 6770 7350 5 mph HT S 5390 6230 7050 7800 8540 9280
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
Footprint Area inch2 406 Tread depth 69/32 Weight lb 356.73 H (*) Footprint Area inch2 465 Tread depth 74/32 Weight lb 477.96 H (*)
psi 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
40 mph S 4420 5100 5790 6390 7000 7610 40 mph S 5280 6100 6910 7640 8370 9090
30 mph S 4640 5360 6070 6710 7350 7990 30 mph S 5540 6400 7260 8020 8790 9560
25 mph S 4840 5590 6340 7000 7670 8330 25 mph S 5780 6680 7570 8370 9170 9960
20 mph S 5080 5860 6660 7350 8060 8750 20 mph S 6070 7010 7960 8790 9620 10460
5 mph LT S 6010 6930 7870 8700 9520 10350 11070 11410 12930 5 mph LT S 7180 8290 9400 10390 11390 12370 13230 13650 15470
5 mph HT S 5080 5860 6660 7350 8060 8750 5 mph HT S 6070 7010 7960 8790 9620 10460
Footprint Area inch2 563 Tread depth 78/32 Weight lb 611.28 H (*) Footprint Area inch2 494 Tread depth 74/32 Weight lb 532.05 H (*)
psi 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
40 mph S 6780 7840 8880 9820 10760 11680 40 mph S 5430 6280 7120 7870 8620 9370
30 mph S 7120 8220 9330 10310 11290 12270 30 mph S 5710 6590 7480 8270 9060 9840
25 mph S 7430 8580 9730 10750 11770 12800 25 mph S 5950 6880 7800 8620 9450 10260
20 mph S 7800 9010 10220 11290 12370 13440 20 mph S 6250 7220 8190 9060 9920 10780
5 mph LT S 9230 10650 12080 13350 14630 15900 17000 17530 19860 5 mph LT S 7400 8540 9690 10710 11730 12740 13620 14050 15930
5 mph HT S 7800 9010 10220 11290 12370 13440 5 mph HT S 6250 7220 8190 9060 9920 10780
MAX. LOAD lb IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
40 mph S 4800 5540 6280 6940 7610 8270
30 mph S 5040 5820 6600 7300 7990 8690
25 mph S 5260 6070 6890 7610 8330 9060
20 mph S 5520 6370 7230 7990 8750 9510
5 mph LT S 6530 7540 8550 9450 10350 11240 12030 12400 14050
5 mph HT S 5520 6370 7230 7990 8750 9510
675
RIM
DW16L
Permitted Rims
W15L(°) - W16L - W18L
DW15L(°) - DW18L
Type
TUBELESS
Tube
16.9-28
TR218
Footprint Area inch2 285 Tread depth 63/32 Weight lb 276.21
psi 6 9 12 17 23 26 29 32 35
bar 0.4 0.6 0.8 1.2 1.6 1.8 2.0 2.2 2.4
MAX. LOAD lb
The TM800 High Speed has been 43 mph S 5320 5640 5970 6290 6610
developed to extend the well-known road 40 mph S 5840 6170 6500 6830 7160
30 mph S 3770 4170 5190 6140 6480 6830 7180 7530
performance of TM800, utilising the most
25 mph S 3940 4350 5410 6400 6770 7130 7480 7850
sophisticated High Speed technology to
20 mph S 4130 4560 5690 6720 7100 7480 7860 8250
generate the most advanced radial tire
5 mph LT S 4830 5390 5950 7410 8760 9260 9760 10250 10750
for agricultural applications.
5 mph HT S 4130 4560 5690 6720 7100 7480 7860 8250
TM800 High Speed handling, grip,
comfort and safety, reach excellent levels
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
and is matching perfectly with the Pattern inches inches inches inches
technological evolution of modern 600/65R28 16.9-28
TM800 HS 23.2 58.7 26 176.8 700 DW18L W18L - DW20B TUBELESS
agricultural tractors, that leads to a great 154D (151E) TR218
sophistication in terms of construction Footprint Area inch2 334 Tread depth 66/32 Weight lb 327.34
(front or full suspension system) and psi 6 9 12 17 23 26 29 32 35
higher safety and performances level. bar 0.4 0.6 0.8 1.2 1.6 1.8 2.0 2.2 2.4
R-1W MAX. LOAD lb
43 mph S 6330 6650 6970 7290 7610
40 mph S 6940 7280 7610 7940 8270
30 mph S 4440 4920 6140 7300 7640 7990 8330 8690
SIZE
25 mph S 4640 5130 6400 7610 7970 8330 8700 9060
540/65R28 149D (146E) 20 mph S 4870 5380 6720 7990 8370 8750 9130 9510
600/65R28 154D (151E) 5 mph LT S 5680 6350 7010 8760 10420 10910 11410 11900 12400
540/65R30 150D (147E) 5 mph HT S 4870 5380 6720 7990 8370 8750 9130 9510
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
600/65R34 TM800 HS 23.2 650/65R38 20.8-38
157D (154E)
65.4 29.3 195.5 775 DW18L W18L - DW20B TUBELESS 163D (159E) TM800 HS 25.4 71.3 32.1 214.6 875 DW20B W18L(°) - DW18L(°) TUBELESS
TR218
Footprint Area inch2 361 Tread depth 69/32 Weight lb 377.30 Footprint Area inch2 426 Tread depth 74/32 Weight lb 490.11
psi 9 12 15 17 20 23 29 35 psi 6 9 12 17 23 26 29 32 35
bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4 bar 0.4 0.6 0.8 1.2 1.6 1.8 2.0 2.2 2.4
MAX. LOAD lb MAX. LOAD lb
43 mph S 6870 7610 8270 43 mph S 8280 8620 8960 9300 9650
40 mph S 7550 8370 9090 40 mph S 9090 9510 9920 10190 10750
30 mph S 4590 5360 6020 6690 7360 7930 8790 9560 30 mph S 5860 6480 7990 9560 9990 10420 10860 11290
25 mph S 4780 5580 6280 6980 7670 8270 9170 9960 25 mph S 6120 6770 8330 9960 10420 10870 11320 11770
20 mph S 5030 5860 6590 7330 8060 8690 9620 10460 20 mph S 6430 7100 8750 10460 10930 11410 11890 12370
5 mph LT S 6550 7640 8600 9560 10500 11330 12560 13650 5 mph LT S 7500 8380 9260 11410 13650 14260 14880 15510 16130
5 mph HT S 5030 5860 6590 7330 8060 8690 9620 10460 5 mph HT S 6430 7100 8750 10460 10930 11410 11890 12370
925
RIM
DW23B
Permitted Rims Type
TUBELESS
Tube
TM700
Footprint Area inch2 553 Tread depth 78/32 Weight lb 607.82
psi 9 12 15 17 20 23 29 35
bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4
MAX. LOAD lb
43 mph S 10750 11600 12350
40 mph S 11680 12740 13560
30 mph S 6690 7680 8830 9960 11100 12350 13380 14330
25 mph S 6980 8010 9200 10390 11590 12790 13960 14770
20 mph S 7330 8420 9670 10910 12160 13560 14660 15650
5 mph LT S 9560 10980 12610 14240 15860 17640 19110 20340
Line in /70 series, very well known for its
5 mph HT S 7330 8420 9670 10910 12160 13560 14660 15650
performance and versatility, capable of
optimising the tractors efficiency during
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment. its whole life cycle.
43/40/30/25/20 mph = On road transport at 43/40/30/25/20 (°) =For these rims please contact the Trelleborg expert in your area.
mph. For intensive road transport at 20, 25, 30 and 40 mph the SRI = Speed Radius Index - value to be used for the calculation of the
pressure should be increased by 6 psi. theoretical tractor speed during European Union homologation and for - Maximum self-cleaning
5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value. the interchangebility of different tire sizes.
5 mph HT = Maximum speed 5 mph. Field application with high torque value.
- Excellent traction
- High level of handling and comfort
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88. on the road
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292. R-1W
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
SIZE SIZE
300/70R20 110A8 (110B) 420/70R28 133D
320/70R20 113A8 (113B) 480/70R28 140D
360/70R20 120A8 (120B) 480/70R28 145D (148A8)
380/70R20 122A8 (122B) 420/70R30 134A8 (134B)
320/70R24 116A8 (116B) 480/70R30 141D
360/70R24 122A8 (122B) 520/70R30 145A8 (145B)
380/70R24 125A8 (125B) 480/70R34 143A8 (143B)
420/70R24 130A8 (130B) 520/70R34 148A8 (148B)
480/70R24 138A8 (138B) 480/70R38 145A8 (145B)
480/70R26 139A8 (139B) 520/70R38 150D
320/70R28 119A8 (119B) 580/70R38 155D
360/70R28 125A8 (125B) 580/70R42 158D
380/70R28 127A8 (127B) 620/70R42 166D
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
320/70R20 W9 - W11 - DW10 11.2-20 320/70R24 W9 - W11 11.2-24
TM700 12.5 38.4 17.3 114.4 475 W10 TUBELESS TM700 12.4 43.3 20 129.9 525 W10 TUBELESS
113A8 (113B) DW11 TR218 116A8 (116B) DW10 - DW11 TR218
Footprint Area inch2 115 Tread depth 50/32 Weight lb 83.67 H (*) Footprint Area inch2 121 Tread depth 50/32 Weight lb 94.67 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 1660 1840 2020 2190 2360 2540 30 mph S 1810 2000 2190 2380 2580 2760
25 mph S 1660 1840 2020 2190 2360 2540 25 mph S 1810 2000 2190 2380 2580 2760
20 mph S 1770 1960 2150 2340 2540 2710 20 mph S 1940 2140 2360 2560 2760 2950
5 mph LT S 2030 2270 2510 2760 2980 3220 3460 3700 3810 4320 5 mph LT S 2200 2470 2730 2980 3240 3510 3770 4010 4140 4700
5 mph HT S 1770 1960 2150 2340 2540 2710 5 mph HT S 1940 2140 2360 2560 2760 2950
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
360/70R20 W10 - W12 - DW10 11.2-20 360/70R24 W10 - W12 - DW10 13.6-24
TM700 13.9 40.9 18.3 122 500 W11 TUBELESS TM700 13.9 45.2 20.4 134.8 550 W11 TUBELESS
120A8 (120B) DW11 - DW12 TR218 122A8 (122B) DW11 - DW12 TR218
Footprint Area inch2 137 Tread depth 53/32 Weight lb 103.61 H (*) Footprint Area inch2 151 Tread depth 53/32 Weight lb 117.33 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 2030 2250 2450 2670 2890 3090 30 mph S 2170 2400 2620 2870 3090 3310
25 mph S 2030 2250 2450 2670 2890 3090 25 mph S 2170 2400 2620 2870 3090 3310
20 mph S 2170 2400 2620 2870 3090 3310 20 mph S 2340 2580 2820 3060 3310 3550
5 mph LT S 2470 2760 3040 3330 3620 3900 4210 4500 4630 5250 5 mph LT S 2650 2950 3260 3570 3880 4190 4500 4810 4960 5620
5 mph HT S 2170 2400 2620 2870 3090 3310 5 mph HT S 2340 2580 2820 3060 3310 3550
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
420/70R24 W12 - W14L - DW12 16.9-24 320/70R28 W9 - W11 - DW10 12.4-28
TM700 16.3 49.3 22.1 145.9 600 W13 TUBELESS TM700 12.4 47.2 21.7 141.9 575 W10 TUBELESS
130A8 (130B) DW13 - DW14L TR218 119A8 (119B) DW11 TR218
Footprint Area inch2 221 Tread depth 57/32 Weight lb 158.76 H (*) Footprint Area inch2 142 Tread depth 50/32 Weight lb 105.52 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 2760 3040 3330 3620 3900 4190 30 mph S 1970 2170 2380 2600 2800 3000
25 mph S 2760 3040 3330 3620 3900 4190 25 mph S 1970 2170 2380 2600 2800 3000
20 mph S 2950 3260 3570 3880 4190 4500 20 mph S 2120 2340 2560 2780 3000 3220
5 mph LT S 3350 3750 4120 4520 4920 5310 5710 6080 6280 7140 5 mph LT S 2400 2670 2950 3240 3530 3790 4080 4370 4500 5090
5 mph HT S 2950 3260 3570 3880 4190 4500 5 mph HT S 2120 2340 2560 2780 3000 3220
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
480/70R24 W14L - W16L - DW14L 16.9-24 360/70R28 W10 - W12 - DW10 12.4-28
TM700 18.4 51.2 22.8 152.6 625 W15L TUBELESS TM700 13.9 49.1 22.4 147.4 600 W11 TUBELESS
138A8 (138B) DW15L - DW16L TR218 125A8 (125B) DW11 - DW12 TR218
Footprint Area inch2 248 Tread depth 59/32 Weight lb 191.67 H (*) Footprint Area inch2 171 Tread depth 53/32 Weight lb 131.00 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 3420 3770 4120 4500 4850 5200 30 mph S 2380 2650 2890 3150 3400 3640
25 mph S 3420 3770 4120 4500 4850 5200 25 mph S 2380 2650 2890 3150 3400 3640
20 mph S 3660 4060 4430 4810 5200 5580 20 mph S 2560 2820 3110 3370 3640 3900
5 mph LT S 4140 4630 5140 5620 6110 6590 7100 7580 7800 8860 5 mph LT S 2910 3260 3590 3950 4280 4630 4960 5310 5470 6190
5 mph HT S 3660 4060 4430 4810 5200 5580 5 mph HT S 2560 2820 3110 3370 3640 3900
psi 9 12 15 17 20 23 26 28 30 Footprint Area inch2 258 Tread depth 66/32 Weight lb 183.92 H (*)
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 psi 6 9 12 15 17 20 23 26 28 30
MAX. LOAD lb bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
40 mph S 2500 2910 3320 3730 4130 4540 MAX. LOAD lb
30 mph S 2620 3050 3480 3910 4340 4770 30 mph S 3060 3400 3700 4030 4370 4670
25 mph S 2740 3190 3640 4080 4530 4980 25 mph S 3060 3400 3700 4030 4370 4670
20 mph S 2880 3350 3810 4290 4760 5220 20 mph S 3280 3640 3970 4320 4670 5000
5 mph LT S 3410 3960 4520 5070 5620 6180 6600 6810 7730 5 mph LT S 3730 4170 4610 5050 5490 5930 6350 6790 7010 7940
5 mph HT S 2880 3350 3810 4290 4760 5220 5 mph HT S 3280 3640 3970 4320 4670 5000
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
480/70R28 W14L - W16L - DW14L 16.9-28 480/70R30 W14L - W16L - DW14L 18.4-30
TM700 18.4 55.7 25 165 675 W15L TUBELESS TM700 18.4 58.0 26.3 174.2 700 W15L TUBELESS
140D DW15L - DW16L TR218 141D DW15L - DW16L TR218
Footprint Area inch2 283 Tread depth 59/32 Weight lb 213.31 H (*) Footprint Area inch2 305 Tread depth 57/32 Weight lb 232.84 H (*)
psi 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
40 mph S 3030 3530 4020 4520 5020 5510 40 mph S 3130 3640 4140 4660 5170 5680
30 mph S 3190 3700 4230 4750 5270 5790 30 mph S 3280 3820 4350 4890 5430 5960
25 mph S 3330 3870 4410 4950 5500 6040 25 mph S 3430 3980 4540 5100 5670 6220
20 mph S 3490 4060 4630 5200 5780 6340 20 mph S 3590 4190 4770 5360 5940 6540
5 mph LT S 4120 4810 5480 6150 6820 7500 8010 8270 9370 5 mph LT S 4250 4950 5640 6340 7030 7730 8260 8520 9660
5 mph HT S 3490 4060 4630 5200 5780 6340 5 mph HT S 3590 4190 4770 5360 5940 6540
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
520/70R34 W15L - W18L 16.9-34 580/70R38 20.8-38
TM700 20.5 64.5 28.7 191.9 775 W16L TUBELESS TM700 23 71.9 32.4 211.8 875 W18L DW18L TUBELESS
148A8 (148B) DW15L - DW16L TR218 155D TR218
Footprint Area inch2 349 Tread depth 69/32 Weight lb 324.79 H (*) Footprint Area inch2 442 Tread depth 73/32 Weight lb 470.01 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 4560 5050 5530 6020 6500 6940 40 mph S 4710 5470 6240 7010 7780 8540
25 mph S 4560 5050 5530 6020 6500 6940 30 mph S 4940 5740 6560 7360 8170 8970
20 mph S 4890 5400 5910 6440 6970 7450 25 mph S 5150 6000 6830 7670 8520 9360
5 mph LT S 5560 6220 6880 7540 8160 8820 9480 10140 10450 11820 20 mph S 5410 6290 7180 8060 8950 9830
5 mph HT S 4890 5400 5910 6440 6970 7450 5 mph LT S 6390 7440 8490 9530 10580 11620 12420 12820 14530
5 mph HT S 5410 6290 7180 8060 8950 9830
TM700
inches inches inches inches
23 75.1 34 224
SRI
925
RIM
W18L
Permitted Rims
DW18L
Type
TUBELESS
Tube
20.8-42
TR218
TM700
Footprint Area inch2 447 Tread depth 73/32 Weight lb 492.87 H (*)
psi 9 12 15 17 20 23 26 28 30
bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb
40 mph S 5160 6000 6850 7680 8530 9370
30 mph S 5410 6310 7190 8070 8960 9840
25 mph S 5640 6570 7500 8420 9340 10260
20 mph S 5930 6900 7870 8840 9810 10780
5 mph LT S 7010 8160 9300 10450 11600 12740 13620 14050 15930
5 mph HT S 5930 6900 7870 8840 9810 10780
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment.
40/30/25/20 mph = On road transport at 40/30/25/20 mph. For H (*) = Maximum speed 5 mph. Harvesting machines in cyclic loading
intensive road transport at 25, 30 and 40 mph the pressure should be service and farm to field transit. SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
increased by 6 psi. SRI = Speed Radius Index - value to be used for the calculation of the Pattern inches inches inches inches
5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value. theoretical tractor speed during European Union homologation and for 260/70R16 9.00-16
5 mph HT = Maximum speed 5 mph. Field application with high torque value. the interchangebility of different tire sizes.
109A8 (109B) TM700 10.2 30.3 13.4 90.9 360 W8 W8L - W9 TUBELESS TR15
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88. Footprint Area inch2 73 Tread depth 40/32 Weight lb 44.09 H (*)
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292.
psi 6 9 12 17 23 29 35 41 42 44
IMPORTANT: the inflation pressure is established considering the application and the load for each tire. bar 0.4 0.6 0.8 1.2 1.6 2.0 2.4 2.8 2.9 3.0
MAX. LOAD lb
30 mph S 1170 1300 1540 1790 2030 2270
25 mph S 1170 1300 1540 1790 2030 2270
20 mph S 1260 1390 1650 1920 2160 2430
5 mph LT S 1370 1520 1680 2010 2340 2670 3000 3330 3420 3860
5 mph HT S 1260 1390 1650 1920 2160 2430
TM700
inches inches inches inches
390
RIM
W9
Permitted Rims
W8 - W8L - W10
Type
TUBELESS
Tube
10.00-16
TR15
TM700 HIGH SPEED
Footprint Area inch2 82 Tread depth 44/32 Weight lb 50.92 H (*)
psi 6 9 12 17 23 29 35 41 42 44
bar 0.4 0.6 0.8 1.2 1.6 2.0 2.4 2.8 2.9 3.0
MAX. LOAD lb
30 mph S 1280 1410 1680 1940 2200 2470
25 mph S 1280 1410 1680 1940 2200 2470
20 mph S 1370 1500 1790 2070 2360 2650
5 mph LT S 1500 1680 1850 2200 2560 2910 3260 3620 3700 4190
The TM700 High Speed is the agriculture
5 mph HT S 1370 1500 1790 2070 2360 2650
radial tire with high lugs yet suitable for
speed up to 40 mph. Intended for
tractors equipped with integral or partial
suspensions, it's a tire that stands out
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube due to its excellent performance both on
Pattern inches inches inches inches
the road and in the field. In fact, though
280/70R18 10.5/80-18
114A8 (114B) TM700 11.1 33.4 15 100.8 410 W9 W8 - W8L - W10 TUBELESS TR218 it reveals an emphasised road look, the
Footprint Area inch 91 2 Tread depth 44/32 Weight lb 55.69 H (*) TM700 High Speed delivers unmatched
psi 6 9 12 17 23 29 35 41 42 44 performance in terms of traction and low
bar 0.4 0.6 0.8 1.2 1.6 2.0 2.4 2.8 2.9 3.0 compaction in the field.
MAX. LOAD lb R-1W
30 mph S 1320 1460 1740 2030 2310 2600
25 mph S 1320 1460 1740 2030 2310 2600
20 mph S 1410 1570 1870 2160 2470 2780 SIZE
5 mph LT S 1590 1760 1940 2310 2690 3060 3440 3810 3900 4430 480/70R30 147D (144E)
5 mph HT S 1410 1570 1870 2160 2470 2780
520/70R30 151D (148E)
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment.
30/25/20 mph = On road transport at 30/25/20 mph. For intensive H (*) = Maximum speed 5 mph. Harvesting machines in cyclic loading
road transport at 30 and 25 mph the pressure should be increased by 6 service and farm to field transit.
psi. SRI = Speed Radius Index - value to be used for the calculation of the
5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value. theoretical tractor speed during European Union homologation and for
5 mph HT = Maximum speed 5 mph. Field application with high torque value. the interchangebility of different tire sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
700
RIM
W15L
Permitted Rims
W14L - W16L - DW14L
DW15L - DW16L
Type
TUBELESS
18.4-30
TR218
Tube
TM600
Footprint Area inch2 305 Tread depth 66/32 Weight lb 242.47 H (*)
psi 6 9 12 17 23 26 29 32 35
bar 0.4 0.6 0.8 1.2 1.6 1.8 2.0 2.2 2.4
MAX. LOAD lb
43 mph S 4530 4940 5350 5770 6170 Line of standard series tire with metric
40 mph S 4970 5420 5880 6330 6780 size marking specially designed for
30 mph S 3400 3750 4480 5200 5700 6170 6650 7120 tubeless fitment.
25 mph S 3520 3890 4640 5370 5910 6390 6890 7390
Traction, self-cleaning and resistance
20 mph S 3990 4410 5250 6080
togheter with high load capacity, low
5 mph LT S 4520 5050 5600 6660 7720 8250
soil compaction and excellent wear
5 mph HT S 3990 4410 5250 6080
resistance are the outstanding
performances of this line.
The distinguishing feature of the
TM600 is the innovative tread design,
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
in particular the number and the
Pattern inches inches inches inches
geometry of lugs and the rounded
520/70R30 W15L - W18L - DW15L 18.4-30
151D (148E)
TM700 HS 20.5 60.4 26.8 181.7 725 W16L
DW16L - DW18L
TUBELESS
TR218
shoulder help to prevent damage on
grassland and crops.
Footprint Area inch2 310 Tread depth 69/32 Weight lb 307.51 H (*)
R-1W
psi 9 12 15 17 20 23 29 35
bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4
MAX. LOAD lb
43 mph S 3250 3740 4290 4850 5400 6010 6500 6940 SIZE SIZE
40 mph S 3570 4110 4720 5320 5930 6390 7150 7610 280/85R20 112A8 (109B) (11.2R20) 380/85R34 137A8 (137B) (14.9R34)
30 mph S 3760 4310 4950 5590 6230 6940 7510 8050 320/85R20 119A8 (116B) (12.4R20) 420/85R34 142A8 (139B) (16.9R34)
25 mph S 3910 4500 5160 5830 6490 7160 7830 8270
280/85R24 115A8 (112B) (11.2R24) 460/85R34 147A8 (144B) (18.4R34)
20 mph S 4110 4720 5420 6120 6820 7610 8220 8820
5 mph LT S 5360 6160 7080 7990 8900 9920 320/85R24 122A8 (119B) (12.4R24) 320/85R38 129A8 (126B) (12.4R38)
5 mph HT S 4110 4720 5420 6120 6820 7610 340/85R24 125A8 (122B) (13.6R24) 340/85R38 133A8 (130B) (13.6R38)
380/85R24 131A8 (128B) (14.9R24) 380/80R38 142A8 (142B)
420/85R24 137A8 (134B) (16.9R24) 380/85R38 144A8 (144B) (14.9R38)
280/85R28 118A8 (115B) (11.2R28) 420/85R38 144A8 (141B) (16.9R38)
320/85R28 124A8 (121B) (12.4R28) 460/85R38 149A8 (146B) (18.4R38)
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment.
43/40/30/25/20 mph = On road transport at 43/40/30/25/20 SRI = Speed Radius Index - value to be used for the calculation of the 340/85R28 127A8 (124B) (13.6R28) 520/85R38 155A8 (152B) (20.8R38)
mph. For intensive road transport at 25, 30, 40 and 43 mph the theoretical tractor speed during European Union homologation and for
pressure should be increased by 6 psi. the interchangebility of different tire sizes. 380/85R28 133A8 (130B) (14.9R28) 480/80R42 151A8 (151B) (18.4R42)
5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value.
5 mph HT = Maximum speed 5 mph. Field application with high torque value. 420/85R28 139A8 (136B) (16.9R28) 520/85R42 157A8 (157B) (20.8R42)
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88. 380/85R30 135A8 (132B) (14.9R30) 480/80R46 158A8 (158B) (18.4R46)
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292.
420/85R30 140A8 (137B) (16.9R30) 520/85R46 158A8 (158B) (20.8R46)
IMPORTANT: the inflation pressure is established considering the application and the load for each tire. 460/85R30 145A8 (142B) (18.4R30) 480/80R50 159D
280/85R20 320/85R24
11.2-20 W10 - W9 - DW10 13.6-24
112A8 (109B) TM600 11.6 38.8 17.7 116.3 475 W10 W9 - W8 - DW10 TUBELESS 122A8 (119B) TM600 13 45.4 20.3 136.4 550 W11 TUBELESS
TR218 DW11 TR218
(11.2R20) (12.4R24)
Footprint Area inch2 106 Tread depth 49/32 Weight lb 83.67 H (*) Footprint Area inch2 161 Tread depth 52/32 Weight lb 111.89 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 1500 1650 1800 1950 2110 2270 30 mph S 2010 2220 2410 2610 2810 3000
25 mph S 1640 1810 1970 2140 2300 2470 25 mph S 2200 2430 2650 2870 3090 3310
20 mph S 1760 1940 2120 2290 2470 2650 20 mph S 2360 2600 2830 3080 3310 3540
5 mph LT S 1970 2200 2440 2670 2900 3130 3360 3590 3700 4200 5 mph LT S 2650 2950 3260 3570 3880 4190 4500 4810 4960 5620
5 mph HT S 1760 1940 2120 2290 2470 2650 5 mph HT S 2360 2600 2830 3080 3310 3540
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
320/85R20 340/85R24
11.2-20 14.9-24
119A8 (116B) TM600 13 41.4 18.5 124.4 500 W11 W10 - W9 - DW11 TUBELESS 125A8 (122B) TM600 13.9 46.8 21.3 139.6 575 W12 W11-DW11-DW12 TUBELESS
TR218 TR218
(12.4R20) (13.6R24)
Footprint Area inch2 141 Tread depth 52/32 Weight lb 99.14 H (*) Footprint Area inch2 175 Tread depth 55/32 Weight lb 130.13 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 1820 2010 2190 2370 2560 2760 30 mph S 2200 2440 2660 2880 3100 3310
25 mph S 2000 2200 2400 2600 2800 3000 25 mph S 2410 2670 2910 3150 3400 3640
20 mph S 2140 2360 2580 2790 3000 3220 20 mph S 2590 2850 3120 3380 3640 3900
5 mph LT S 2440 2710 2990 3260 3540 3810 4090 4370 4500 5100 5 mph LT S 2910 3250 3590 3940 4280 4620 4960 5290 5460 6180
5 mph HT S 2140 2360 2580 2790 3000 3220 5 mph HT S 2590 2850 3120 3380 3640 3900
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
280/85R24 380/85R24
11.2-24 W12 - W11 - DW11 16.9-24
115A8 (112B) TM600 11.5 42.8 19.4 129 525 W10 W9 - W8 - DW10 TUBELESS 131A8 (128B) TM600 15.4 49.4 22 147.6 600 W13 TUBELESS
TR218 DW12 - DW13 TR218
(11.2R24) (14.9R24)
Footprint Area inch2 113 Tread depth 49/32 Weight lb 95.39 H (*) Footprint Area inch2 217 Tread depth 57/32 Weight lb 150.02 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 1630 1800 1960 2130 2280 2470 30 mph S 2580 2850 3130 3400 3660 3970
25 mph S 1790 1970 2150 2330 2500 2680 25 mph S 2830 3130 3430 3730 4010 4300
20 mph S 1920 2120 2300 2490 2680 2880 20 mph S 3030 3350 3670 3990 4300 4610
5 mph LT S 2160 2410 2670 2920 3170 3420 3660 3900 4020 4560 5 mph LT S 3470 3870 4270 4660 5060 5460 5850 6250 6450 7310
5 mph HT S 1920 2120 2300 2490 2680 2880 5 mph HT S 3030 3350 3670 3990 4300 4610
420/85R24 340/85R28
W14L - DW14L 16.9-24 12.4-28
137A8 (134B) TM600 17.2 52.1 23.2 156.3 625 W15L TUBELESS 127A8 (124B) TM600 13.9 50.7 23.4 153 625 W12 W11 - DW11 - DW12 TUBELESS
DW15L TR218 TR218
(16.9R24) (13.6R28)
Footprint Area inch2 258 Tread depth 58/32 Weight lb 196.82 H (*) Footprint Area inch2 194 Tread depth 55/32 Weight lb 144.31 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 3050 3370 3680 4000 4310 4670 30 mph S 2310 2560 2790 3030 3270 3530
25 mph S 3350 3700 4050 4390 4730 5070 25 mph S 2540 2800 3060 3330 3590 3860
20 mph S 3590 3970 4330 4700 5070 5430 20 mph S 2720 3000 3280 3570 3850 4130
5 mph LT S 4060 4530 5000 5480 5950 6430 6900 7370 7610 8620 5 mph LT S 3100 3460 3820 4190 4550 4910 5260 5610 5790 6560
5 mph HT S 3590 3970 4330 4700 5070 5430 5 mph HT S 2720 3000 3280 3570 3850 4130
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
280/85R28 380/85R28
12.4-28 W12 - W11 - DW11 16.9-28
118A8 (115B) TM600 11.5 46.7 21.3 140.9 575 W10 W9 - DW10 TUBELESS 133A8 (130B) TM600 15.4 53.4 24.2 160.8 650 W13 TUBELESS
TR218 DW12 - DW13 TR218
(11.2R28) (14.9R28)
Footprint Area inch2 125 Tread depth 49/32 Weight lb 106.71 H (*) Footprint Area inch2 227 Tread depth 57/32 Weight lb 166.78 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 1750 1930 2120 2290 2470 2680 30 mph S 2730 3010 3300 3570 3860 4190
25 mph S 1920 2120 2310 2510 2710 2910 25 mph S 3000 3310 3620 3920 4230 4540
20 mph S 2060 2270 2480 2690 2910 3120 20 mph S 3220 3540 3870 4200 4530 4860
5 mph LT S 2350 2620 2900 3170 3440 3700 3970 4230 4370 4950 5 mph LT S 3660 4090 4510 4930 5350 5770 6180 6600 6810 7730
5 mph HT S 2060 2270 2480 2690 2910 3120 5 mph HT S 3220 3540 3870 4200 4530 4860
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
320/85R28 420/85R28
W10 - W9 - DW10 12.4-28 W14L - DW14L 16.9-28
124A8 (121B) TM600 13 49.4 22.3 149.4 600 W11 TUBELESS 139A8 (136B) TM600 17.2 56.1 25 168.9 675 W15L TUBELESS
DW11 TR218 DW15L TR218
(12.4R28) (16.9R28)
Footprint Area inch2 168 Tread depth 52/32 Weight lb 124.76 H (*) Footprint Area inch2 274 Tread depth 58/32 Weight lb 216.62 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 2120 2340 2560 2780 3000 3200 30 mph S 3230 3560 3890 4220 4550 4940
25 mph S 2310 2560 2800 3040 3280 3530 25 mph S 3540 3900 4270 4630 4990 5360
20 mph S 2480 2740 3000 3260 3520 3780 20 mph S 3790 4180 4570 4960 5350 5740
5 mph LT S 2810 3140 3470 3800 4130 4460 4800 5130 5290 6000 5 mph LT S 4310 4820 5310 5810 6310 6800 7300 7790 8040 9120
5 mph HT S 2480 2740 3000 3260 3520 3780 5 mph HT S 3790 4180 4570 4960 5350 5740
380/85R30 380/85R34
W12- W11 - DW11 14.9-30 16.9-34
135A8 (132B) TM600 15.4 55.4 25 166.9 675 W13 TUBELESS 137A8 (137B) TM600 15.4 59.6 26.9 180.1 725 W12 W13 TUBELESS
DW12 - DW13 TR218 TR218
(14.9R30) (14.9R34)
Footprint Area inch2 235 Tread depth 57/32 Weight lb 171.73 H (*) Footprint Area inch2 249 Tread depth 60/32 Weight lb 188.84 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 2880 3170 3470 3780 4080 4410 30 mph S 3340 3680 4030 4390 4730 5070
25 mph S 3150 3480 3810 4140 4480 4810 25 mph S 3340 3680 4030 4390 4730 5070
20 mph S 3380 3740 4090 4440 4800 5150 20 mph S 3570 3950 4320 4700 5060 5430
5 mph LT S 3850 4300 4750 5200 5650 6110 6550 6990 7210 8180 5 mph LT S 4080 4540 5020 5490 5960 6440 6900 7370 7610 8620
5 mph HT S 3380 3740 4090 4440 4800 5150 5 mph HT S 3570 3950 4320 4700 5060 5430
Tread SW OD SLR RC SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
SIZE Pattern inches inches inches inches
SRI RIM Permitted Rims Type Tube Pattern inches inches inches inches
420/85R30 420/85R34
W14L - DW14L 18.4-30 W14L - DW14L 16.9-34
140A8 (137B) TM600 17.2 58.1 26 175.4 700 W15L TUBELESS 142A8 (139B) TM600 17.2 62.1 28.1 186.8 750 W15L TUBELESS
DW15L TR218 DW15L TR218
(16.9R30) (16.9R34)
Footprint Area inch2 264 Tread depth 63/32 Weight lb 226.52 H (*) Footprint Area inch2 297 Tread depth 63/32 Weight lb 247.23 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 3320 3660 4000 4340 4680 5070 30 mph S 3520 3880 4240 4600 4960 5360
25 mph S 3640 4010 4390 4760 5140 5510 25 mph S 3860 4250 4650 5050 5450 5840
20 mph S 3900 4300 4700 5100 5500 5900 20 mph S 4130 4560 4980 5410 5830 6260
5 mph LT S 4410 4930 5450 5960 6480 7000 7510 8010 8270 9370 5 mph LT S 4680 5240 5790 6340 6880 7420 7960 8500 8760 9930
5 mph HT S 3900 4300 4700 5100 5500 5900 5 mph HT S 4130 4560 4980 5410 5830 6260
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
460/85R30 460/85R34
W15L - DW15L 18.4-30 W15L - DW15L 16.9-34
145A8 (142B) TM600 18.7 60.8 27.2 184.2 725 W16L TUBELESS 147A8 (144B) TM600 18.7 64.8 29.3 194.7 775 W16L TUBELESS
DW16L TR218 DW16L TR218
(18.4R30) (18.4R34)
Footprint Area inch2 347 Tread depth 67/32 Weight lb 266.33 H (*) Footprint Area inch2 336 Tread depth 67/32 Weight lb 299.52 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 3810 4220 4620 5020 5420 5840 30 mph S 4070 4490 4910 5340 5750 6170
25 mph S 4190 4630 5070 5510 5950 6390 25 mph S 4460 4930 5390 5850 6320 6780
20 mph S 4490 4960 5430 5900 6370 6850 20 mph S 4780 5280 5780 6270 6770 7260
5 mph LT S 5130 5720 6320 6910 7510 8100 8700 9290 9590 10870 5 mph LT S 5430 6070 6710 7350 7980 8610 9240 9870 10170 11530
5 mph HT S 4490 4960 5430 5900 6370 6850 5 mph HT S 4780 5280 5780 6270 6770 7260
320/85R38
W10 - W9 - DW10 16.9-38 380/80R38 W11 - W12 16.9-38
129A8 (126B) TM600 12.8 59.8 27.2 181.3 725 W11 TUBELESS TM600 15.7 63.4 28.7 192.9 775 W13 TUBELESS
DW11 TR218 142A8 (142B) DW11-DW12-DW13 TR218
(12.4R38)
Footprint Area inch2 189 Tread depth 52/32 Weight lb 150.29 H (*) Footprint Area inch2 - Tread depth 61/32 Weight lb 225.3 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 29 35 41 42 44
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4 2.8 2.9 3.0
MAX. LOAD lb MAX. LOAD lb
30 mph S 2440 2690 2950 3210 3460 3750 30 mph S 2760 3160 3630 4090 4560 5030 5430 5840
25 mph S 2680 2950 3240 3520 3800 4080 25 mph S 2760 3160 3630 4090 4560 5030 5430 5840
20 mph S 2870 3160 3460 3770 4070 4370 20 mph S 2940 3380 3880 4380 4880 5380 5820 6260
5 mph LT S 3660 3640 4020 4400 4780 5170 5540 5930 6120 6930 5 mph LT S 3700 4250 4880 5510 6140 6770 7320 7870 8590 8760 9930
5 mph HT S 2870 3160 3460 3770 4070 4370 5 mph HT S 2940 3380 3880 4380 4880 5380 5820 6260
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
340/85R38 380/85R38
W11 - DW11 16.9-38 W11 - W12 16.9-38
133A8 (130B) TM600 13.9 60.7 28 183.7 750 W12 TUBELESS 144A8 (144B) TM600 15.7 63.4 28.7 192.9 775 W13 TUBELESS
DW12 TR218 DW11-DW12-DW13 TR218
(13.6R38) (14.9R38)
Footprint Area inch2 208 Tread depth 55/32 Weight lb 182.33 H (*) Footprint Area inch2 233 Tread depth 60/32 Weight lb 230.96 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 29 35 41 42 44
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4 2.8 2.9 3.0
MAX. LOAD lb MAX. LOAD lb
30 mph S 2730 3010 3300 3570 3860 4190 30 mph S 2910 3340 3840 4320 4820 5310 5740 6170
25 mph S 3000 3310 3620 3920 4230 4540 25 mph S 2910 3340 3840 4320 4820 5310 5740 6170
20 mph S 3220 3540 3870 4200 4530 4860 20 mph S 3110 3570 4100 4630 5160 5690 6150 6610
5 mph LT S 3660 4090 4510 4930 5350 5770 6180 6600 6810 7730 5 mph LT S 3910 4500 5160 5830 6490 7150 7740 8320 9070 9260 10490
5 mph HT S 3220 3540 3870 4200 4530 4860 5 mph HT S 3110 3570 4100 4630 5160 5690 6150 6610
420/85R38 520/85R38
W14L - DW14L 16.9-38 W16L - W18L 20.8-38
144A8 (141B) TM600 17.2 66.1 29.9 199.2 800 W15L TUBELESS 155A8 (152B) TM600 21.1 72.8 32.5 216.9 875 DW18L TUBELESS
DW15L TR218 DW16L TR218
(16.9R38) (20.8R38)
Footprint Area inch2 275 Tread depth 63/32 Weight lb 288.40 H (*) Footprint Area inch2 489 Tread depth 67/32 Weight lb 401.21 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 3710 4100 4480 4860 5250 5680 30 mph S 5130 5650 6180 6710 7250 7830
25 mph S 4080 4500 4920 5340 5750 6170 25 mph S 5620 6210 6790 7370 7960 8540
20 mph S 4370 4820 5270 5710 6160 6610 20 mph S 6020 6650 7280 7890 8520 9150
5 mph LT S 4960 5530 6110 6680 7250 7830 8400 8970 9260 10490 5 mph LT S 6850 7650 8450 9250 10040 10840 11630 12420 12820 14530
5 mph HT S 4370 4820 5270 5710 6160 6610 5 mph HT S 6020 6650 7280 7890 8520 9150
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube Tread SW OD SLR RC
Pattern inches inches inches inches SIZE Pattern inches inches inches inches
SRI RIM Permitted Rims Type Tube
460/85R38 480/80R42
W15L - DW15L 18.4-38
149A8 (146B) TM600 18.7 68.8 31.5 207.1 825 W16L TUBELESS 151A8 (151B) TM600 19.5 72.8 32.8 218.5 875 W16B 16DD - DW16B TUBELESS 20.8-42
DW16L TR218 TR218
(18.4R38) (18.4R42)
Footprint Area inch2 362 Tread depth 67/32 Weight lb 329.56 H (*) Footprint Area inch2 393 Tread depth 70/32 Weight lb 375.81 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 4300 4750 5200 5640 6080 6610 30 mph S 5000 5520 6050 6580 7100 7610
25 mph S 4720 5210 5710 6190 6680 7160 25 mph S 5000 5520 6050 6580 7100 7610
20 mph S 5050 5590 6120 6640 7150 7670 20 mph S 5360 5920 6480 7040 7590 8150
5 mph LT S 5720 6390 7070 7740 8410 9080 9760 10420 10750 12180 5 mph LT S 6110 6800 7520 8230 8950 9650 10350 11060 11410 12930
5 mph HT S 5050 5590 6120 6640 7150 7670 5 mph HT S 5360 5920 6480 7040 7590 8150
520/85R42 520/85R46
W16L - W18L 20.8-42 W16L-W18L-DW16L
157A8 (157B) TM600 21.1 76.9 34.7 231 925 DW18L TUBELESS 158A8 (158B) TM600 21.1 80.5 35.6 242.5 975 DW16L TUBELESS
DW16L TR218 DD16L - DD18L
(20.8R42) (20.8R46)
Footprint Area inch2 450 Tread depth 70/32 Weight lb 469.26 H (*) Footprint Area inch2 454 Tread depth 70/32 Weight lb 476.05 H (*)
psi 6 9 12 15 17 20 23 26 28 30 psi 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1 bar 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
30 mph S 5970 6600 7230 7860 8480 9090 30 mph S 6100 6740 7370 8000 8620 9370
25 mph S 5970 6600 7230 7860 8480 9090 25 mph S 6100 6740 7370 8000 8620 9370
20 mph S 6390 7070 7740 8410 9070 9730 20 mph S 6530 7210 7890 8560 9230 10030
5 mph LT S 7290 8130 8980 9830 10680 11530 12380 13230 13650 15470 5 mph LT S 8290 9160 10030 10880 11730 12740 13620 14050 15930
5 mph HT S 6390 7070 7740 8410 9070 9730 5 mph HT S 6530 7210 7890 8560 9230 10030
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
480/80R46
480/80R50
158A8 (158B) TM600 19.5 77.3 34.9 234.3 925 W16B 16DD - DW16B TUBELESS TM600 19.7 80.5 36.8 243.7 975 DW15B DW16B TUBELESS
159D
(18.4R46)
Footprint Area inch2 407 Tread depth 70/32 Weight lb 407.17 H (*) Footprint Area inch2 349 Tread depth 70/32 Weight lb 449.79 H (*)
psi 9 12 15 17 20 23 29 35 41 42 44 psi 9 12 15 17 20 23 29 35 41 42 44
bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4 2.8 2.9 3.0 bar 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4 2.8 2.9 3.0
MAX. LOAD lb MAX. LOAD lb
30 mph S 4410 5060 5810 6560 7310 8060 8810 9370 40 mph S 5990 6760 7530 8300 9070 9650
25 mph S 4410 5060 5810 6560 7310 8060 8810 9370 30 mph S 4760 5480 6280 7100 7900 8720 9520 10130
20 mph S 4720 5420 6220 7020 7830 8630 9420 10030 25 mph S 4970 5710 6560 7400 8250 9080 9930 10570
5 mph LT S 6000 6890 7900 8930 9940 10970 11980 12650 13800 14090 15960 20 mph S 5210 6000 6880 7770 8650 9550 10430 11100
5 mph HT S 4720 5420 6220 7020 7830 8630 9420 10030 5 mph LT S 6170 7090 8130 9180 10240 11290 12330 13120 14040 14470 16400
5 mph HT S 5210 6000 6880 7770 8650 9550 10430 11100
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment.
30/25/20 mph = On road transport at 30/25/20 mph. For intensive road H (*) = Maximum speed 5 mph. Harvesting machines in cyclic loading
transport at 25 and 30 mph the pressure should be increased by 6 psi. service and farm to field transit.
5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value. SRI = Speed Radius Index - value to be used for the calculation of the
5 mph HT = Maximum speed 5 mph. Field application with high torque value. theoretical tractor speed during European Union homologation and for
the interchangebility of different tire sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
TM190 SIZE
9.5R20
8 PR
Pattern
TM190
inches inches inches inches
450
RIM
W8
Permitted Rims
W7 - W8H
Type
TUBETYPE
Tube
9.5-20
TR218
PRESSURE H (*)
psi 20 23 26 29 35 41 49 52
bar 1.4 1.6 1.8 2.0 2.4 2.8 3.4 3.6
MAX. LOAD lb
The special lug shape, which gradually 25 mph S 1150 1230 1320 1410 1580 1720
widens toward the central tread zone, 20 mph S 1430 1550 1660 1760 1960 2150
provides high resistance to gougings 5 mph LT S 2070 2200 2460 2690 3010 3660
5 mph HT S 1430 1550 1660 1760 1960 2150
and lacerations and delivers even wear
on both road and field. The TM190 is
suitable for most operations and types
of terrain, giving top performances in
applications that involve a high level of
road and field use, whether on normal Tread SW OD SLR RC
SIZE Pattern inches inches inches inches
SRI RIM Permitted Rims Type Tube
cultivated terrain or hard, stony
grounds. 8.3R24 8.3-24
8 PR TM190 8.2 39 18.3 118.5 475 W7 W6 TUBETYPE TR218
The reduced height of its lugs makes it
PRESSURE H (*)
an especially good performer on
psi 25 28 32 38 45 54 58
grassland. R-1 bar 1.7 1.9 2.2 2.6 3.1 3.7 4.0
MAX. LOAD lb
SIZE SIZE 25 mph S 1170 1250 1360 1490 1650
7.50R20 6 PR 9.5R24 107A8 20 mph S 1460 1540 1690 1860 2060
5 mph LT S 1950 2130 2350 2600 2890 3510
9.5R20 8 PR 12.4R32* 122A8 (119B)
5 mph HT S 1460 1540 1690 1860 2060
8.3R24 8 PR 12.4R36 124A8 (121B)
* in phase out
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
7.50R20 7.5-20 9.5R24 8.3-24
6 PR TM190 7.9 35.8 16.6 108.5 425 5.50F 6.00F TUBETYPE TR15 107A8 TM190 9.6 40.9 19.1 123.6 500 W8 W7 - W8H - W9 TUBETYPE TR218
PRESSURE H (*) PRESSURE H (*)
psi 15 17 20 23 26 29 33 psi 6 9 12 15 17 20 23 26 28 30
bar 1.0 1.2 1.4 1.6 1.8 2.0 2.3 bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb MAX. LOAD lb
25 mph S 860 960 1050 1360 1210 30 mph S 1290 1420 1550 1700 1830 1980
20 mph S 1070 1190 1300 1410 1510 25 mph S 1410 1570 1710 1850 2010 2150
5 mph LT S 1330 1490 1620 1750 1880 2010 2580 20 mph S 1520 1680 1840 2000 2160 2310
5 mph HT S 1070 1190 1300 1410 1510 5 mph LT S 1720 1930 2130 2340 2540 2730 2950 3150 3240 3660
5 mph HT S 1520 1680 1840 2000 2160 2310
650
RIM
W11
Permitted Rims
W9 - W10
DW10 - DW11
Type
TUBETYPE
Tube
12.4-32
TR218
TM100
PRESSURE H (*)
psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb
30 mph S 1980 2190 2400 2600 2820 3000
25 mph S 2170 2400 2620 2870 3090 3310
20 mph S 2340 2580 2820 3060 3310 3550
5 mph LT S 2650 2950 3260 3570 3880 4190 4500 4810 4960 5620
5 mph HT S 2340 2580 2820 3060 3310 3550
in phase out
30 mph S 2120 2340 2560 2780 3000 3200 230/95R44 134A8 (134B) 380/90R54 152A8 (152B) R-1W
25 mph S 2310 2560 2800 3040 3280 3530
270/95R44 142A8 (142B)
20 mph S 2490 2760 3020 3280 3530 3790
5 mph LT S 2820 3150 3480 3810 4140 4480 4810 5140 5290 6000
5 mph HT S 2490 2760 3020 3280 3530 3790 SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches
230/95R32 9.5-32
128A8 (128B) TM100 9.3 49.8 23.4 153.5 600 W7 W6 TUBELESS TR218
Footprint Area inch2 109 Tread depth 42/32 Weight lb 83.20
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment. psi 15 17 20 23 29 35 41 46 52 58 64
30/25/20 mph = On road transport at 30/25/20 mph. For intensive road H (*) = Maximum speed 5 mph. Harvesting machines in cyclic loading
transport at 30 and 25 mph the pressure should be increased by 6 psi. service and farm to field transit. bar 1.0 1.2 1.4 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4
5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value. SRI = Speed Radius Index - value to be used for the calculation of the MAX. LOAD lb
5 mph HT = Maximum speed 5 mph. Field application with high torque value. theoretical tractor speed during European Union homologation and for
the interchangebility of different tire sizes. 30 mph S 2870 3140 3420 3690 3970
25 mph S 1790 2030 2230 2470 2670 2870 3140 3420 3690 3970
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292.
20 mph S 1920 2170 2380 2630 2850 3060 3360 3660 3960 4250
5 mph Cyc S 2410 2730 3010 3330 3590 3860 4230 4610 4980 5360 5950
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
230/95R44 8.3/9.5-44
230/95R36 9.5-36 TM100 9.3 61.8 28.9 190.9 750 W7 W8 TUBELESS
TM100 9.3 53.7 25.4 165.7 650 W7 W6 TUBELESS 134A8 (134B) TR218
130A8 (130B) TR218
Footprint Area inch2 133 Tread depth 44/32 Weight lb 109.03
Footprint Area inch2 103 Tread depth 42/32 Weight lb 91.94
psi 15 17 20 23 29 35 41 46 52 58 64
psi 15 17 20 23 29 35 41 46 52 58 64 bar 1.0 1.2 1.4 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4
bar 1.0 1.2 1.4 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 MAX. LOAD lb
MAX. LOAD lb 30 mph S 3370 3690 4020 4350 4670
30 mph S 3020 3320 3600 3900 4190 25 mph S 2110 2390 2620 2900 3140 3370 3690 4020 4350 4670
25 mph S 1880 2140 2350 2600 2810 3020 3320 3600 3900 4190 20 mph S 2260 2560 2810 3110 3350 3600 3960 4310 4650 5000
20 mph S 2020 2290 2510 2790 3010 3230 3550 3860 4180 4490 5 mph Cyc S 2840 3220 3540 3910 4230 4550 4990 5430 5880 6320 7010
5 mph Cyc S 2550 2890 3170 3520 3790 4080 4480 4870 5270 5650 6280
270/95R44 9.5-44 230/95R48 TM100 9.4 65.9 30.7 203.5 800 W7 W8 TUBELESS 9.5-48
142A8 (142B) TM100 10.6 64.8 30.3 197.6 775 W8 W9 - W10 TUBELESS TR218 136A8 (136B)
Footprint Area inch2 162 Tread depth 47/32 Weight lb 171.91 Footprint Area inch2 131 Tread depth 44/32 Weight lb 132.14
psi 15 17 20 23 29 35 41 46 52 58 64 psi 15 17 20 23 29 35 41 46 52 58 64
bar 1.0 1.2 1.4 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 bar 1.0 1.2 1.4 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4
MAX. LOAD lb MAX. LOAD lb
30 mph S 4210 4620 5030 5430 5840 30 mph S 3560 3900 4250 4600 4940
25 mph S 2630 2990 3270 3630 3920 4210 4620 5030 5430 5840 25 mph S 2230 2520 2770 3060 3320 3560 3900 4250 4600 4940
20 mph S 2820 3200 3510 3880 4190 4510 4950 5380 5820 6260 20 mph S 2380 2700 2970 3280 3550 3810 4180 4550 4920 5290
5 mph Cyc S 3550 4020 4420 4890 5290 5690 6240 6790 7340 7890 8760 5 mph Cyc S 3010 3410 3740 4130 4480 4810 5270 5740 6210 6670 7410
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches Pattern inches inches inches inches
300/95R46
TM100 12.2 69.1 33.1 212.6 825 W10 W9 - W11 TUBELESS 12.4-46 270/95R48
148A8 (148B) TM100 11 68.9 32.7 210.6 825 W8 W9 - W10 TUBELESS 11.2-48
144A8 (144B)
Footprint Area inch2 - Tread depth 47/32 Weight lb 193.81
psi 15 17 20 23 29 35 41 46 52 58 64 Footprint Area inch2 171 Tread depth 47/32 Weight lb 176.15
bar 1.0 1.2 1.4 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4 psi 15 17 20 23 29 35 41 46 52 58 64
MAX. LOAD lb bar 1.0 1.2 1.4 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.4
30 mph S 5000 5490 5970 6460 6940 MAX. LOAD lb
25 mph S 3130 3550 3890 4310 4660 5000 5490 5970 6460 6940 30 mph S 4450 4880 5310 5740 6170
20 mph S 3350 3790 4170 4610 4980 5360 5880 6390 6910 7440 25 mph S 2780 3150 3460 3840 4140 4450 4880 5310 5740 6170
5 mph Cyc S 4220 4780 5260 5820 6280 6760 7410 8070 8720 9380 10420 20 mph S 2980 3370 3700 4100 4430 4760 5220 5690 6150 6610
5 mph Cyc S 3760 4250 4670 5170 5590 6010 6590 7180 7760 8330 9260
380/90R50
151A8 (151B)
Pattern
TM100
inches inches inches inches
975
RIM
W12
Permitted Rims
W11 - W13
Type
TUBELESS
Tube
MARSHLAND
Footprint Area inch2 260 Tread depth 62/32 Weight lb 292.79
psi 15 17 20 23 29 35 41 42 44
bar 1.0 1.2 1.4 1.6 2.0 2.4 2.8 2.9 3.0
MAX. LOAD lb
30 mph S 5320 5940 6550 7150 7610
25 mph S 4720 5320 5940 6550 7150 7610
20 mph S 5050 5700 6350 7000 7660 8150
5 mph S 6420 7240 8070 8910 9730 10350 11070 11410 12930
5 mph S 5050 5700 6350 7000 7660 8150
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment. PRESSURE
30/25/20 mph = On road transport at 30/25/20 mph. For intensive road 5 mph Cyc = Maximum speed 5 mph. Field application with 20% slope
transport at 25 and 30 mph the pressure should be increased by 6 psi. max. psi 12 15 17 20 23 26 29
SRI = Speed Radius Index - value to be used for the calculation of the bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0
theoretical tractor speed during European Union homologation and for
the interchangebility of different tire sizes. MAX. LOAD lb
30 mph S 3440 3910 4400 4880 5360
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
25 mph S 3440 3910 4400 4880 5360
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292. 20 mph S 3670 4190 4710 5220 5740
5 mph LT S 4670 5320 5970 6640 7290 7660 8040
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
5 mph HT S 3670 4190 4710 5220 5740
TO BE MOUNTED IN TUBELESS VERSION ONLY FOR TRACTORS GREATER THAN 190 HP
800
RIM
W15L
Permitted Rims
W14L-DW14L
DW15L
Type
TUBELESS
Tube
16.9-38
TR218
TM300S
PRESSURE
psi 12 15 17 20 23 26 29
bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0
MAX. LOAD lb
30 mph S 3960 4510 5070 5620 6170
25 mph S 3960 4510 5070 5620 6170
20 mph S 4230 4830 5420 6020 6610
5 mph LT S 5380 6130 6890 7650 8400 8830 9260
5 mph HT S 4230 4830 5420 6020 6610 The particularly deep lugs and their
special shape give the TM300S
powerful grip which, along with the
advantages of the radial construction,
SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube make this tire suitable for all types of
Pattern inches inches inches inches
heavy work, on wet or difficult surfaces.
460/85R38
149A8 (149B)
Marshland 19.6 71.3 32.1 213.4 825 W16L
W15L-DW15L
DW16L
TUBELESS
18.4-38
TR218
R-1W
SIZE
PRESSURE 13.6R36 127A8 (124B)
psi 12 15 17 20 23 26 29
bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0
MAX. LOAD lb Tread SW OD SLR RC
SIZE Pattern inches inches inches inches
SRI RIM Permitted Rims Type Tube
30 mph S 4590 5240 5880 6530 7160
25 mph S 4590 5240 5880 6530 7160
13.6R36 W11 - DW11 13.6-36
20 mph S 4920 5600 6290 6980 7670 TM300S 13.7 59.4 27.5 180.7 725 W12 TUBETYPE
127A8 (124B) DW12 TR218
5 mph LT S 6240 7120 7990 8870 9740 10250 10750
5 mph HT S 4920 5600 6290 6980 7670 PRESSURE H (*)
psi 6 9 12 15 17 20 23 26 28 30
bar 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 1.9 2.1
MAX. LOAD lb
30 mph S 2310 2560 2800 3040 3280 3530
25 mph S 2540 2800 3060 3330 3590 3860
20 mph S 2710 3000 3280 3570 3860 4140
5 mph LT S 3090 3440 3810 4170 4540 4890 5270 5620 5800 6570
5 mph HT S 2710 3000 3280 3570 3860 4140
SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment. SW = On the nominal RIM. (Not referred to the PERMITTED RIMS) S = Single fitment.
30/25/20 mph = On road transport at 30/25/20 mph. For intensive road SRI = Speed Radius Index - value to be used for the calculation of the 30/25/20 mph = On road transport at 30/25/20 mph. For intensive road H (*) = Maximum speed 5 mph. Harvesting machines in cyclic loading
transport at 25 and 30 mph the pressure should be increased by 6 psi. theoretical tractor speed during European Union homologation and for transport at 30 and 25 mph the pressure should be increased by 6 psi. service and farm to field transit.
5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value. the interchangebility of different tire sizes. 5 mph LT = Maximum speed 5 mph. Surface treatment with low torque value. SRI = Speed Radius Index - value to be used for the calculation of the
5 mph HT = Maximum speed 5 mph. Field application with high torque value. 5 mph HT = Maximum speed 5 mph. Field application with high torque value. theoretical tractor speed during European Union homologation and for
the interchangebility of different tire sizes.
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88. For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
To calculate the right pressure for dual or triple wheel mounting, please refer to page 292. To calculate the right pressure for dual or triple wheel mounting, please refer to page 292.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire. IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
Matching sustainable and precision farming SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
pattern inches inches inches inches
approaches, the TM3000
is the right choice to boost harvesting IF 800/70R32
CFO TM3000 30.9 76.8 33.5 - 925 DW27B TUBELESS
productivity. 182A8
PRESSURE
psi 17 20 23 26 29 32 35
SIZE bar 1.2 1.4 1.6 1.8 2.0 2.2 2.4
MAX. LOAD lb
IF 800/65R32 * CFO 178A8
Up to 25 mph (*) 12740 14240 15740 16490 17240 17990 18740
IF 800/70R32 CFO 182A8 9 Cyc (*) 19750 22080 24400 25560 26730 27890 29050
IF 1050/50R32 * CFO 185D Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
IF 800/70R38 * CFO 184A8
* in preparation SW = On the nominal RIM. (Not referred to the PERMITTED RIMS)
(*) = Single mounting
SRI = Speed Radius Index – value to be used for the calculation of the theoretical tractor speed during European Union homologation and for the
interchangebility of different Tire sizes.
TM2000 SIZE
650/75R32
172A8
Pattern inches inches inches inches
825
RIM
DW20B
Permitted Rims Type Tube
TUBELESS 24.5-32
(24.5R32)
The radial tire for harvesting and
Footprint Area inch2 463 Tread depth 73/32 Weight lb 552.85
combined machines, the result of the
most advanced technology and psi 12 15 20 23 29 35 41 46 49 55
experience of Trelleborg in agricultural bar 0.8 1.0 1.4 1.6 2.0 2.4 2.8 3.2 3.4 3.8
tires. MAX. LOAD lb
- High load capacity even at low 25 mph S 6640 7460 9060 9920 10800 11680 12830 13890
pressure. The extensive footprint area 20 mph S 7100 7980 9690 10520 11560 12600 13730 14860
allows a greater load to be carried for a 5 mph LT S 8530 9950 12420 13580 15480 16930 18450 20040 20440 20830
given inflation pressure compared to 5 mph HT S 7100 7980 9690 10520 11560 12600 13730 14860
standard tires 5 Cyc S 10470 13380 14740 17120 18780 20470 22270 22720 23610
- Excellent traction capacity thanks to the
flexible radial carcass and deep tractive
lugs
- Maximum resistance to impact and
puncturing ensured by the high quality
materials used Tread SW OD SLR RC
R-1W
SIZE Pattern inches inches inches inches SRI RIM Permitted Rims Type Tube
- Optimal lateral stability even on difficult
and very uneven terrain. Low vibration 710/75R32
TM2000 28.9 72.8 32.7 220.3 875 DW23B TUBELESS 30.5-32
levels and high comfort in all working 177A8
conditions
Footprint Area inch2 540 Tread depth 73/32 Weight lb 630.27
SIZE psi 12 15 20 23 29 35 41 46 49 55
620/75R26 166A8 (23.1R26) bar 0.8 1.0 1.4 1.6 2.0 2.4 2.8 3.2 3.4 3.8
650/75R32 172A8 (24.5R32) MAX. LOAD lb
25 mph S 7690 8650 10490 11400 12520 13660 14880 16090
710/75R32 177A8
20 mph S 8230 9250 11230 12190 13400 14610 15920 17230
800/65R32 178A8 (30.5LR32) 5 mph LT S 9190 10710 13690 15080 17520 19210 20930 22770 23240 24140
900/60R32 181A8 5 mph HT S 8230 9250 11230 12190 13400 14610 15920 17230
5 Cyc S 12150 15520 17100 19850 21780 23730 25800 26330 27360
800/65R32
178A8
Pattern inches inches inches inches
875
RIM Permitted Rims
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
76 Cross-ply tires for agricultural implement and small tractors - TM90 R-1 77
Tread SW OD SLR RC
TD27 SIZE
5.00-15 6 PR
(82A6)
Pattern
TD27
inches inches inches inches
155/165R15
TR15
PRESSURE
psi 26 29 32 35 38 41 44 46 49 54 67
bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.7 4.6
MAX. LOAD lb
The tread pattern of the TD27 allows 15 790 840 890 940 980 1030 1070 1100 1150 1200
maximum use this tire in both field and 20 680 730 770 820 850 890 930 960 990 1050
road operations. 22 620 660 690 730 760 800 840 860 890 950
25 550 580 620 650 680 720 740 770 790 840
SIZE SIZE F 1570
4.00-15 4 PR (66A6) 6.50-16 8 PR (98A6) loader 2080
SIZE Tread SW OD SLR RC RIMS Tube SIZE Tread SW OD SLR RC RIMS Tube
Pattern inches inches inches inches Pattern inches inches inches inches
PRESSURE PRESSURE
psi 26 29 32 35 38 41 44 46 49 psi 26 29 32 35 38 41 44 46 49 54 67
bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.7 4.6
MAX. LOAD lb MAX. LOAD lb
15 530 560 600 620 650 680 710 740 760 15 880 940 990 1050 1090 1150 1190 1230 1280 1340
20 450 490 520 540 560 600 620 640 660 20 770 820 860 900 950 990 1040 1070 1110 1170
22 410 440 460 490 510 530 550 570 600 22 690 740 770 820 860 890 930 970 1000 1050
25 360 390 410 430 450 470 500 510 530 25 620 650 690 730 760 790 830 860 890 940
F 990 F 1740
loader 2330
PRESSURE PRESSURE
psi 26 29 32 35 38 41 44 46 49 52 55 58 61 64 65 81 psi 26 29 32 35 38 41 44 46 49 52 54 67
bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.5 5.6 bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.7 4.6
MAX. LOAD lb MAX. LOAD lb
15 990 1060 1110 1180 1230 1290 1340 1390 1440 1490 1540 1590 1630 1680 1700 15 1460 1550 1640 1720 1810 1880 1960 2040 2120 2180 2220
20 860 910 970 1030 1070 1120 1170 1210 1260 1300 1330 1380 1420 1460 1480 20 1270 1340 1420 1500 1570 1640 1710 1770 1840 1900 1930
22 780 830 870 930 960 1000 1050 1090 1120 1170 1200 1250 1280 1310 1330 22 1140 1210 1280 1340 1410 1480 1530 1600 1650 1710 1740
25 690 740 780 820 860 890 940 970 1000 1040 1070 1100 1140 1170 1180 25 1010 1080 1140 1200 1260 1310 1370 1420 1470 1520 1540
F 2200 F 2890
loader 2940 loader 3850
PRESSURE PRESSURE
psi 26 29 32 35 38 41 44 46 49 52 55 58 61 75 psi 26 29 32 35 38 41 44 46 49 52 55 58 61 64 67 68 84
bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 5.2 bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.7 5.8
MAX. LOAD lb MAX. LOAD lb
15 1160 12301300137014301500157016201680 1740180018501910 15 1490 1590 1680 1760 1840 1930 2010 2080 2160 2240 2300 2380 2450 2510 2580 2610
20 1000 10701140119012501300136014101470 1510155016101650 20 1290 1380 1460 1530 1610 1680 1680 1820 1870 1940 2010 2060 2130 2180 2240 2270
22 900 960 1030107011201180122012701310 1360140014401490 22 1170 1250 1310 1380 1440 1510 1580 1630 1690 1750 1810 1860 1920 1960 2020 2040
25 800 860 900 960 10001050109011201170 1210125012901320 25 1040 1100 1170 1220 1280 1340 1400 1460 1500 1550 1610 1650 1700 1750 1800 1820
F 2470 F 3380
loader 3280 loader 4510
6.00-19 6 PR
(93A6)
Pattern
TD27
inches inches inches inches
6.00-19
TR15
TD300
PRESSURE The TD300 is suitable for all types of terrain,
psi 26 29 32 35 38 41 44 46 48 59 due to the strength of its carcass and the
bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.3 4.1 high resistance of its tread, which also
MAX. LOAD lb provides a high level of straight line stability
15 1160 1230 1300 1370 1430 1500 1550 1620 1650 during ploughing, thus allowing high working
20 1000 1070 1140 1190 1250 1300 1360 1410 1430 speeds.
22 900 960 1010 1070 1120 1170 1220 1270 1290
25 800 860 900 950 990 1040 1080 1120 1150
F 2140 SIZE SIZE
loader 2850 7.50-16 8 PR (103A6) 7.50-18 8 PR (106A6)
9.00-16 8 PR (111A6) 7.50-18 10 PR (112A6)
SW = On the RIM in bold. F = Refers to tractors with mounted implements operating in the field. 7.50-20 6 PR (103A6)
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
PRESSURE
psi 26 29 32 35 38 41 44 46 49 52 54 67
bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.7 4.6
MAX. LOAD lb
15 1460 1550 1640 1720 1810 1880 1960 2040 2120 2180 2220
20 1270 1340 1420 1500 1570 1640 1710 1770 1840 1900 1930
22 1140 1210 1280 1340 1410 1480 1530 1600 1650 1710 1740
25 1010 1080 1140 1200 1260 1310 1370 1420 1470 1520 1540
F 2890
loader 3850
9.00-16 8 PR 7.50-18 10 PR
TD300 10 33.5 15.7 103.5 6.00F - 6LB - W7 - W8 9.00-16 TR15 TD300 8.1 33.6 15.7 102.1 5.50F - 5.00F - 6.00F 7.50-18 TR15
(111A6) (112A6)
PRESSURE PRESSURE
psi 26 29 32 35 38 41 44 45 55 psi 26 29 32 35 38 41 44 46 49 52 55 58 61 64 67 69 86
bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.1 3.8 bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.9
MAX. LOAD lb MAX. LOAD lb
15 2000 2120 2240 2360 2470 2580 2690 2730 15 1610 1710 1810 1910 2000 2080 2170 2250 2340 2410 2490 2570 2650 2710 2790 2840
20 1730 1840 1950 2050 2150 2250 2340 2400 20 1400 1490 1580 1650 1730 1810 1880 1960 2030 2090 2170 2240 2290 2360 2430 2470
22 1550 1650 1750 1840 1930 2020 2110 2140 22 1260 1340 1420 1490 1570 1630 1700 1760 1830 1880 1950 2010 2070 2130 2180 2230
25 1390 1480 1550 1640 1720 1800 1860 1910 25 1120 1190 1260 1320 1390 1460 1510 1570 1620 1680 1730 1790 1840 1880 1940 1970
F 3530 F 3690
loader 4710 loader 4920
PRESSURE PRESSURE
psi 26 29 32 35 38 41 44 46 49 52 54 67 psi 26 29 32 35 38 41 50
bar 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.7 4.6 bar 1.8 2.0 2.2 2.4 2.6 2.8 3.5
MAX. LOAD lb MAX. LOAD lb
15 1580 1680 1770 1870 1960 2050 2130 2220 2290 2370 2410 15 1710 1820 1930 2030 2130 2220
20 1380 1470 1540 1620 1710 1770 1850 1930 2000 2060 2090 20 1490 1590 1680 1760 1850 1930
22 1230 1310 1390 1470 1530 1600 1660 1730 1800 1850 1880 22 1340 1420 1510 1590 1660 1740
25 1100 1170 1230 1300 1370 1420 1480 1540 1600 1650 1680 25 1190 1270 1340 1410 1480 1540
F 3130 F 2900
loader 4180 loader 3860
SW = On the RIM in bold. F = Refers to tractors with mounted implements operating in the field.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
SIZE SIZE
400/55-17.5 125A8 T414 900/60-32 176A8 T414
T421 500/60-26.5
600/55-26.5
141A8
148A8
T414
T414
710/55-34 *
650/60-38
155A8
161A8
T414
T414
600/55-30.5 150A8 T414 710/65-38 162A8 T414
600/60-30.5 153A8 T414 850/50-38 163A8 T414
750/45-30.5 143A8 T414 850/60-38 175A8 T414
750/50-30.5 159A8 T414 850/55-42 161A8 T414
800/55-30.5 172A8 T414 * in phase out
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88.
To calculate the right pressure for dual or triple wheel mounting, please refer to page 288.
TL = Tubeless, but tube can be used. All tubes have valve type TR218 if not other is specified.
16-20-25-30 mph = 16-20-25-30 mph road service. (Note: for frequent or long distance road transport, increase the inflation pressure by 30%).
5 mph H = 5 mph field service with high torque. (Note: in extra heavy and continous field service such as ploughing, increas inflation pressure by 30%).
5 mph LT = 5 mph field service with low torque.
5 mph Cyc = 5 mph cyclic field service for combine harvesters with a gradually increasing load (filling or grain tank) up to max. Load and unloading before
transportation on field or road. Min. Load may not exceed 60% of max. Load. The ground must not have slopes > 20% (> 11 degree).
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
500/60R22.5
Pattern
Twin Radial
inches inches inches inches
20.5 46.9
SRI
155D
The first Trelleborg radial implement tire,
perfect in all working conditions and on Footprint Area inch2 200 Tread depth 28/32 Weight lb 211.98
any type of soil. psi 12 15 20 23 29 38 44 46 52 58
- Excellent ground care due to the wide bar 0.8 1.0 1.4 1.6 2.0 2.6 3.0 3.2 3.6 4.0
area of footprint and the rounded MAX. LOAD lb
profile of the shoulder. The central 40 mph S 3040 3430 4190 4540 5160 6240 6880 7160 7830 8540
30 mph S 3680 4140 5070 5510 6240 7570 8320 8540 9480 10200
"block structure" enables the tire to
25 mph S 4130 4660 5690 6170 7010 8510 9350 9650 10650 11680
self-clean efficiently and rapidly
20 mph S 4600 5170 6320 6940 7780 9460 10380 10750 11830 12790
- High speed and maximised road
5 mph S 5480 6160 7530 8220 9280 11270 12370 12790 14100 15210
handling even in high stress conditions
- High load capacity and excellent
traction when used as a drive wheel
and at the same time offering minimum
rolling resistance when in free-rolling
mode
- Great comfort and excellent even wear
due to the sidewall profile and tread SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
Pattern inches inches inches inches
design.
560/60R22.5
Twin Radial 21.7 48.8 22 150.6 600 AG16.00 16.00 - 17.00 TUBELESS
161D
580/65R22.5
Twin Radial 23 51.2 23.1 155.5 625 AG16.00 16.00 - 17.00 - AG20.00 TUBELESS 600/55R26.5
159D Twin Radial 25 52.8 23.8 161.8 625 AG20.00 TUBELESS
165D
Footprint Area inch2 238 Tread depth 28/32 Weight lb 289.61 Footprint Area inch2 278 Tread depth 28/32 Weight lb 323.30
psi 12 15 20 23 26 29 35 41 44 46 psi 12 15 20 23 29 38 44 46 52 58
bar 0.8 1.0 1.4 1.6 1.8 2.0 2.4 2.8 3.0 3.2(*) bar 0.8 1.0 1.4 1.6 2.0 2.6 3.0 3.2 3.6 4.0
MAX. LOAD lb MAX. LOAD lb
40 mph S 4130 4640 5680 6190 6590 6990 7990 8980 9310 9650 40 mph S 4050 4550 5570 6010 6860 8290 9140 9370 10410 11350
30 mph S 4990 5620 6870 7500 7970 8450 9670 10870 11280 11670 30 mph S 4890 5510 6740 7390 8290 10060 11060 11350 12590 13890
25 mph S 5610 6320 7720 8420 8960 9500 10860 12210 12670 13120 25 mph S 5500 6190 7560 8270 9310 11310 12420 12790 14150 15430
20 mph S 6230 7010 8560 9350 9950 10550 12060 13570 14070 14570 20 mph S 6110 6870 8400 9090 10350 12570 13790 14330 15720 17090
5 mph S 7430 8360 10210 11140 11860 12580 14370 16170 16770 17360 5 mph S 7290 8190 10010 11020 12330 14980 16450 17090 18740 20390
(*) = The inflation pressure can be increased up to 4.00 bar.
710/50R26.5 750/60R30.5
Twin Radial 28 53.3 24 162.2 650 AG24.00 TUBELESS Twin Radial 31.1 66.1 29.8 206.5 800 AG24.00 TUBELESS
170D 181D
Footprint Area inch2 326 Tread depth 31/32 Weight lb 358.83 Footprint Area inch2 447 Tread depth 31/32 Weight lb 570.48
psi 12 15 20 23 29 38 44 46 52 58 psi 12 15 20 23 29 38 44 46 52 58
bar 0.8 1.0 1.4 1.6 2.0 2.6 3.0 3.2 3.6 4.0 bar 0.8 1.0 1.4 1.6 2.0 2.6 3.0 3.2 3.6 4.0
MAX. LOAD lb MAX. LOAD lb
40 mph S 4760 5290 6480 7010 7940 9660 10580 10980 12170 13230 40 mph S 6480 7290 8910 9920 10980 13330 14640 15160 16680 18190
30 mph S 5770 6400 7850 8490 9610 11680 12810 13290 14730 16010 30 mph S 7840 8820 10780 11680 13280 16130 17700 18340 20170 22050
25 mph S 6480 7200 8820 9530 10800 13140 14400 14940 16560 17990 25 mph S 8820 9920 12110 13230 14930 18120 19910 20610 22670 24690
20 mph S 7200 7990 9790 10590 11990 14580 15980 16580 18390 19970 20 mph S 9790 11010 13460 14770 16570 20130 22100 22880 25180 27560
5 mph S 8580 9520 11670 12620 14290 17380 19050 19760 21910 23810 5 mph S 11660 13130 16090 17640 19750 23990 26340 27280 30020 33070
Tread SW OD SLR RC SIZE Tread SW OD SLR RC SRI RIM Permitted Rims Type Tube
SIZE Pattern inches inches inches inches
SRI RIM Permitted Rims Type Tube Pattern inches inches inches inches
650/65R30.5 850/50R30.5
Twin Radial 26.6 64.4 28.9 195.9 775 AG20.00 TUBELESS Twin Radial 34.4 64.2 28.9 195.4 775 AG28.00 TUBELESS
176D 182D
Footprint Area inch2 392 Tread depth 31/32 Weight lb 460.21 Footprint Area inch2 - Tread depth 31/32 Weight lb 568.08
psi 12 15 20 23 29 38 44 46 52 58 psi 12 15 20 23 29 38 44 46 52 58
bar 0.8 1.0 1.4 1.6 2.0 2.6 3.0 3.2 3.6 4.0 bar 0.8 1.0 1.4 1.6 2.0 2.6 3.0 3.2 3.6 4.0
MAX. LOAD lb MAX. LOAD lb
40 mph S 5580 6270 7670 8270 9450 11430 12600 13230 14350 15650 40 mph S 6680 7510 9180 10030 11310 13730 15080 15650 17170 18740
30 mph S 6750 7590 9280 10200 11430 13880 15230 15650 17360 18740 30 mph S 8080 9090 11110 12130 13680 16610 18240 18900 20790 22710
25 mph S 7580 8530 10430 11350 12840 15600 17130 17640 19510 21490 25 mph S 9080 10220 12490 13620 15380 18670 20500 21270 23370 25460
20 mph S 8420 9480 11590 12790 14260 17320 19010 19840 21670 23370 20 mph S 10090 11340 13870 15120 17070 20730 22770 23590 25940 28330
5 mph S 10040 11300 13800 15210 17000 20650 22670 23370 25830 28330 5 mph S 12020 13530 16520 18030 20360 24710 27140 28110 30920 33730
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
102 Cross-ply tires for agricultural implement and small tractors - IM110 - IM220 103
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.5 1.8 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.8 2.9
SIZE RIM PERMITTED TUBE SPEED psi 7 12 15 17 20 22 26 29 30 32 33 35 36 37 40 41
inches inches max max inches inches
+/- 1.5% +/- 1.5% inches inches +/- 2% +/- 2.5% RIMS mph
MAX. LOAD lb
54A8 4.5 21.1 4.7 21.1 9.7 63.2 3.00B 3.00D-3.50B 4.00-12 Freerolling
2.50CSC TR13 30 220 290 330 360 410 420
25 240 320 360 410 450 470
5 340 450 520 570 630 650
4.00-12 2PR
42A8 Driving wheel
IM110 30 150 210 230 260 290 300
25 180 230 260 290 320 330
15 210 280 310 340 370 400
5 240 320 360 410 440 460
5C 280 360 420 450 510 520 570 610
104 Cross-ply tires for agricultural implement and small tractors - IM110 - IM220 105
New tire PRESSURE
LI/SS SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.5 1.8 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.1 3.2 3.5 3.7 4.0 4.3 4.6 4.8 5.0 5.2
SIZE RIM PERMITTED RIMS TUBE SPEED psi 7 12 15 17 20 22 26 29 30 32 33 35 36 37 38 40 41 43 44 46 50 53 57 61 66 69 71 74
inches inches inches inches
+/- 1.5% +/- 1.5% +/- 2% +/- 2.5% mph
MAX. LOAD lb
110A8 9.8 29.6 12.6 86.1 7.00 9.00 8.50-12/ Freerolling
/10.0 30 860 1140 1290 1430 1580 1640 1820 1940 2000 2050 2110
/80-12 25 960 1260 1430 1600 1750 1820 2030 2150 2220 2280 2340
TR15 5 1340 1760 2010 2240 2450 2550 2830 3020 3100 3190 3270
10.0/80-12 6PR
98A8 Driving wheel
IM110 30 610 800 910 1010 1110 1160 1290 1370 1410 1460 1490
25 670 890 1010 1140 1230 1290 1430 1520 1570 1610 1650
15 800 1060 1210 1340 1480 1530 1710 1810 1860 1920 1970
5 950 1250 1420 1590 1730 1810 2010 2130 2190 2260 2310
5C 1060 1410 1600 1790 1950 2040 2260 2400 2470 2540 2610 2680 2730 2800 2870 2920 2990 3040
106 Cross-ply tires for agricultural implement and small tractors - IM110 - IM220 107
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.5 1.8 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.2 3.5 3.7 4.0 4.3 4.6 4.8 5.0 5.2
SIZE RIM PERMITTED TUBE SPEED psi 7 12 15 17 20 22 26 29 30 32 33 35 36 37 38 40 41 43 46 50 53 57 61 66 69 71 74
inches inches max max inches inches
+/- 1.5% +/- 1.5% inches inches +/- 2% +/- 2.5% RIMS mph
MAX. LOAD lb
113A8 7.9 29.7 8.7 30.8 12.6 86.5 6LB 5K-5.5J-5.5K KR 15 Freerolling
195/ 30 710 930 1060 1180 1290 1340 1500 1590 1640 1690 1730 1770 1820 1850 1900 1940 1970 2020 2090 2200 2280
205R15 25 780 1040 1180 1310 1430 1500 1660 1760 1820 1870 1920 1970 2020 2060 2110 2150 2190 2240 2330 2460 2540
TR13 5 1100 1440 1650 1840 2010 2090 2330 2480 2550 2610 2690 2760 2820 2890 2950 3020 3080 3140 3260 3440 3550
7.5L-15 8PR
100A8 Driving wheel
IM110 30 500 650 740 830 900 940 1050 1100 1140 1170 1200 1230 1260 1290 1320 1340 1380 1400 1460 1530 1590
25 550 720 820 910 1000 1040 1160 1230 1270 1300 1330 1370 1400 1430 1470 1500 1530 1570 1620 1710 1760
15 650 860 980 1090 1190 1230 1380 1470 1510 1540 1590 1630 1660 1710 1740 1790 1820 1860 1930 2030 2090
5 760 1010 1150 1280 1400 1460 1620 1720 1770 1820 1870 1920 1960 2010 2050 2090 2140 2180 2270 2390 2470
5C 870 1140 1290 1440 1590 1630 1830 1950 2000 2050 2110 2160 2200 2260 2310 2360 2410 2470 2560 2690 2780 2900 3040 3160 3230
108 Cross-ply tires for agricultural implement and small tractors - IM110 - IM220 109
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.5 1.8 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.2 3.5 3.7 4.0 4.2 4.3 4.6 4.8 5.0 5.2
SIZE RIM PERMITTED TUBE SPEED psi
inches inches max max inches inches 7 12 15 17 20 22 26 29 30 32 33 35 36 37 38 40 41 43 46 50 53 57 60 61 66 69 71 74
+/- 1.5% +/- 1.5% inches inches +/- 2% +/- 2.5% RIMS mph
MAX. LOAD lb
112A8 8.2 31.7 8.9 32.2 14.3 95.0 5.50F 5.00F-5K 8.25-16 Freerolling
6.00F-6LB V3-02-08 30 750 990 1120 1260 1370 1420 1590 1690 1740 1790 1830 1870 1920 1970 2020 2050 2090 2140 2230
(5.50FSDC-4.50E) TR76 25 840 1100 1250 1390 1520 1590 1760 1870 1930 1980 2040 2080 2140 2180 2240 2280 2330 2380 2470
5 1170 1530 1750 1950 2130 2220 2470 2620 2700 2780 2840 2920 2990 3060 3130 3200 3260 3330 3460
7.50-16 8PR
99A8 Driving wheel
IM110 30 520 680 780 870 950 990 1100 1170 1200 1230 1270 1300 1330 1360 1390 1420 1460 1480 1540
25 570 760 860 960 1060 1100 1220 1300 1330 1370 1410 1440 1480 1510 1540 1580 1610 1640 1710
15 680 900 1030 1150 1260 1310 1460 1540 1590 1630 1680 1720 1760 1800 1840 1880 1920 1960 2030
5 800 1060 1210 1340 1480 1530 1710 1820 1870 1920 1970 2020 2070 2120 2170 2220 2260 2300 2390
5C 900 1200 1360 1510 1660 1740 1930 2050 2110 2160 2230 2280 2330 2380 2440 2490 2540 2590 2690 2830 2940 3080 3160
110 Cross-ply tires for agricultural implement and small tractors - IM110 - IM220 111
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.5 1.8 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0 3.2 3.5 3.7 4.0 4.2 4.3 4.6 4.8 5.0 5.2
SIZE RIM PERMITTED TUBE SPEED psi 7 12 15 17 20 22 26 29 30 32 33 35 36 37 38 40 41 43 46 50 53 57 60 61 66 69 71 74
inches inches max max inches inches
+/- 1.5% +/- 1.5% inches inches +/- 2% +/- 2.5% RIMS mph
MAX. LOAD lb
106A8 8.0 34.3 8.9 34.4 15.7 103.4 5.50F 4-50E 7.50-18 Freerolling
5.00F-6.00F TR15 30 770 1010 1160 1290 1410 1470 1630 1740 1790 1840 1880
25 860 1120 1290 1430 1570 1630 1820 1930 1980 2040 2090
5 1200 1580 1810 2010 2190 2280 2540 2700 2780 2850 2930
7.50-18 6PR
94A8 Driving wheel
IM110 30 540 720 820 900 990 1040 1150 1220 1260 1300 1330
25 610 790 900 1010 1100 1150 1280 1360 1400 1440 1480
15 720 950 1080 1200 1310 1370 1520 1620 1660 1710 1750
5 850 1110 1270 1410 1540 1610 1790 1910 1960 2020 2070
5C 960 1260 1420 1600 1740 1810 2020 2140 2200 2280 2330 2380 2450 2500 2560 2610 2660 2730
SW = On the RIM in bold. F = Refers to tractors with mounted implements operating in the field.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
112 Cross-ply tires for agricultural implement and small tractors - IM110 - IM220 113
Tread SW OD SLR RC PERMITTED
TD27 SIZE
4.00/4.50-21
4 PR
Pattern
TD27
inches inches inches inches
3.00D
RIMS
2.50C
Tube
PRESSURE
psi 26 29 32 35 38 40 44
Tire for power-driven and towed agricultural
bar 1.8 2.0 2.2 2.4 2.6 2.7 3.0
machinery. It permits maximum exploitation MAX. LOAD lb
of tire according to the use, offering 15 820 850 900 960 990 1030
structural strength, versatility and the 20 760 800 850 900 940 960
opportunity to make optimum use of the 22 720 750 790 850 880 900
potential in any vehicle/machine. 25 680 720 760 800 840 860
F 990
SIZE SW = On the RIM in bold. F = Refers to tractors with mounted implements operating in the field.
4.00/4.50-21 4 PR
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
114 Cross-ply tires for agricultural implement and small tractors - TD27 115
A complete range of Low Ground Pressure tires, designed for field application with maximum
T404 respect for the soil, available in a variety of tread patterns and a wide range of sizes.
TWIN 404 – The non-aggressive tread pattern makes this tire suitable for soft terrain.
Characterized by its rounded shoulder design and wide contact area.
TWIN 421 and TWIN 423 – The unique bias-belt design, maximizes the ground contact area,
improving flotation and traction. The rounded shoulder ensures minimum soil compaction.
TWIN 478 – The grooved tread pattern minimizes rolling resistance and is ideal for road-work.
The rounded shoulder enlarges the ground contact area.
T421
SIZE SIZE
280/60-15.5 115A8 T421 400/60-26.5 147A8 T404
new
280/60-15.5 125A8 T421 500/60-26.5 159A8 T421
280/60-15.5 128A8 T478 600/55-26.5 166A8 T404
T423 400/60-15.5
400/60-15.5
145A8
145A8
T404
T478
600/55-26.5
710/45-26.5
166A8
169A8
T421
T404
420/55-17 133A8 T421 710/45-26.5 169A8 T423 MK2
400/55-17.5 131A8 T404 800/40-26.5 172A8 T404
400/55-22.5 147A8 T404 800/40-26.5 172A8 T423 MK2
500/45-22.5 146A8 T404 600/60-30.5 171A8 T421
500/60-22.5 155A8 T404 650/65-30.5 173A8 T404
500/60-22.5 155A8 T421 710/50-30.5 175A8 T404
560/45-22.5 154A8 T404 710/50-30.5 175A8 T423
560/60-22.5 158A8 T404 750/60-30.5 178A8 T404
T478 560/60-22.5
600/50-22.5
167A8
156A8
T404
T404
800/45-30.5
800/45-30.5
178A8
178A8
T404
T423
600/50-22.5 156A8 T423 850/50-30.5 179A8 T404
710/40-22.5 158A8 T404
116 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 117
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.5 3.6 3.7 3.8 4.0 4.1 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi 7 11 14 17 20 23 26 28 31 34 37 40 43 46 48 50 51 53 54 57 59 67 73 75 84
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
115A8 10.2 28.7 10.8 29.4 12.8 84.3 AG8.00 Freerolling
30 mph 900 1150 1320 1490 1660 1840 1970 2110 2260 2410
25 mph 1000 1280 1470 1650 1840 2040 2190 2340 2510 2680
5 mph 1320 1650 1880 2110 2340 2570 2810 3010 3190 3370 3580 3790
280/60-15.5 TL
103A8 13.2 85.2 Driving wheel
T421 30 mph 640 820 940 1050 1170 1290 1390 1490 1610 1730
25 mph 720 900 1040 1170 1300 1430 1540 1650 1790 1930
15 mph 850 1080 1230 1390 1540 1710 1840 1960 2130 2290
5 mph 940 1180 1330 1490 1650 1810 1970 2120 2250 2400 2570 2730
5 mph Cyc 1220 1500 1680 1850 2030 2220 2390 2570 2760 2920 3080 3240 3410 3590 3780 3880
118 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 119
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 2.4 2.6 2.8 2.9 3.0 3.2 3.4 3.6 3.8 4.0 4.1 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi 7 11 14 17 20 23 26 28 31 33 34 37 40 41 43 46 48 51 54 57 59 67 73 75 84
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
131A8 15.7 34.6 16.5 35.5 15.3 101.7 AG11.75 Freerolling
30 mph 1700 2160 2470 2780 3080 3370 3630 3870
25 mph 1880 2400 2740 3090 3420 3750 4020 4300
5 mph 2480 3110 3530 3950 4370 4760 5160 5530 5860 6020
400/55-17.5 TT
119A8 15.7 102.7 Driving wheel
T404 30 mph 1210 1530 1760 1980 2160 2340 2520 2700
25 mph 1340 1710 1950 2200 2400 2600 2800 3000
15 mph 1600 2030 2330 2620 2870 3100 3340 3570
5 mph 1760 2220 2510 2810 3120 3350 3580 3850 4080 4200
5 mph Cyc 2300 2810 3140 3480 3820 4170 4510 4760 5050 5170 5300 5590 5880 6000
120 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 121
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.5 3.6 3.7 3.8 4.0 4.1 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi 7 11 14 17 20 23 26 28 31 34 37 40 43 46 48 50 51 53 54 57 59 67 73 75 84
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
155A8 19.7 46.1 20.8 47.2 20.7 137.4 AG16.00 Freerolling
30 mph 2890 3670 4180 4680 5210 5750 6210 6650 7160 7690
25 mph 3210 4080 4640 5200 5800 6390 6900 7390 7960 8540
5 mph 4220 5280 5990 6670 7350 8080 8810 9460 10050 10690 11400 12100
500/60-22.5 TL
143A8 21.5 138.2 Driving wheel
T421 30 mph 2010 2550 2950 3370 3740 4090 4390 4680 5050 5400
25 mph 2230 2830 3280 3750 4140 4540 4880 5200 5600 6010
15 mph 2650 3370 3910 4460 4940 5400 5810 6190 6670 7150
5 mph 2930 3670 4190 4730 5300 5780 6260 6710 7100 7530 8010 8510
5 mph Cyc 3820 4660 5220 5780 6430 7040 7670 8190 8760 9240 9730 10210 10680 11230 11790 12070
122 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 123
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 2.4 2.6 2.8 2.9 3.0 3.2 3.4 3.6 3.7 4.0 4.2 4.4 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi 7 11 14 17 20 23 26 28 31 33 34 37 40 41 43 46 48 51 53 57 60 63 67 73 75 84
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
156A8 24 46.1 25.1 47.8 20.5 136.2 AG20.00 Freerolling
30 mph 3400 4320 4940 5560 6190 6850 7400 7940
25 mph 3780 4810 5490 6170 6890 7610 8220 8820
5 mph 4970 6230 7050 7890 8720 9600 10480 11270 11990 12350
600/50-22.5 TL
144A8 21.3 137.8 Driving wheel
T404 30 mph 2410 3080 3520 3970 4400 4820 5190 5560
25 mph 2690 3420 3910 4410 4880 5360 5780 6170
15 mph 3200 4070 4650 5250 5810 6370 6870 7340
5 mph 3540 4430 5030 5620 6230 6810 7390 7930 8410 8640
5 mph Cyc 4610 5620 6290 6970 7650 8330 9020 9670 10330 10650 10910 11510 12090 12350
124 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 125
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.5 3.6 3.7 4.0 4.2 4.4 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi 7 11 14 17 20 23 26 28 31 34 37 40 43 46 48 50 51 53 57 60 63 67 73 75 84
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
159A8 19.7 49.6 20.8 50.7 22 149.2 AG16.00 Freerolling
30 mph 3210 4090 4670 5260 5850 6450 6960 7440 8060 8690
25 mph 3570 4540 5190 5840 6500 7160 7730 8270 8950 9650
5 mph 4700 5890 6680 7460 8260 9060 9880 10600 11250 11990 12840 13660
500/60-26.5 TL
147A8 22.8 150 Driving wheel
T421 30 mph 2260 2880 3320 3770 4170 4560 4920 5260 5680 6100
25 mph 2510 3200 3690 4190 4630 5070 5460 5840 6310 6780
15 mph 2990 3800 4390 4980 5510 6030 6500 6960 7510 8070
5 mph 3310 4140 4720 5300 5920 6460 6990 7500 7960 8470 9040 9600
5 mph Cyc 4310 5260 5890 6530 7220 7890 8560 9170 9780 10330 10890 11440 12020 12650 13290 13620
126 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 127
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.5 3.6 3.7 4.0 4.2 4.4 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi
inches inches max max inches inches 7 11 14 17 20 23 26 28 31 34 37 40 43 46 48 50 51 53 57 60 63 67 73 75 84
inches inches mph
MAX. LOAD lb
169A8 28 53.1 30.4 54.5 23.2 156.3 AG24.00 Freerolling
30 mph 4370 5560 6310 7040 7860 8690 9310 9920 10710 11510
25 mph 4850 6170 7000 7830 8730 9650 10350 11020 11900 12790
5 mph 6380 7990 9040 10040 11060 12170 13290 14240 15050 15970 17050 18110
710/45-26.5 TL
157A8 24 158.3 Driving wheel
T423 MK2 30 mph 3120 3970 4480 4960 5530 6110 6580 7040 7620 8190
25 mph 3460 4410 4970 5510 6140 6780 7310 7830 8450 9090
15 mph 4120 5250 5910 6560 7310 8070 8700 9310 10060 10820
5 mph 4560 5710 6440 7140 7790 8560 9340 10030 10650 11340 12130 12870
5 mph Cyc 5950 7250 8120 8990 9720 10500 11280 12160 13030 13820 14580 15330 16090 16950 17820 18280
128 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 129
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 2.4 2.6 2.8 2.9 3.0 3.2 3.4 3.5 3.6 3.7 4.0 4.2 4.4 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi 7 11 14 17 20 23 26 28 31 33 34 37 40 41 43 46 48 50 51 53 57 60 63 67 73 75 84
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
161A8 26 65 27.4 66.1 28 190.2 AG20.00 Freerolling
30 mph 5530 7040 8100 9180 10150111101202012900
25 mph 6150 7830 9010 10200 11280123501335014330
5 mph 8100 101401154013000 144201572017010183001948020060
650/65-30.5 TL
161A8 29.1 191.3 Driving wheel
T404 30 mph 3900 4960 5700 6450 7190 7940 8560 9170
25 mph 4330 5510 6340 7160 7990 8820 9510 10200
15 mph 5160 6560 7540 8530 9500 104901132012140
5 mph 5700 7140 8120 9100 101301113012150130501388014270
5 mph Cyc 7440 9070 1015011240 12400135301466015820169401753017980 189801996020390
130 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 131
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 2.4 2.6 2.8 2.9 3.0 3.2 3.4 3.5 3.6 3.7 4.0 4.2 4.4 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi 7 11 14 17 20 23 26 28 31 33 34 37 40 41 43 46 48 80 51 53 57 60 63 67 73 75 84
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
178A8 29.5 65 31.7 68.4 28 190.2 AG24.00 Freerolling
30 mph 6430 8190 9350 10520 11710 12900 13900 14880
25 mph 7140 9090 10390 11680 13010 14330 15440 16530
5 mph 9410 11780 13360 14940 16510 18130 21730 21210 22510 23150
750/60-30.5 TL
166A8 29.1 191.7 Driving wheel
T404 30 mph 4520 5750 6590 7440 8300 9180 9850 10520
25 mph 5030 6390 7330 8270 9230 10200 10960 11680
15 mph 5970 7610 8720 9840 10980 12140 13040 13900
5 mph 6610 8280 9410 10540 11680 12860 14050 15060 15940 16360
5 mph Cyc 8630 10520 11780 13040 14340 15630 16920 18270 19580 20260 20750 21850 23370
132 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 133
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 2.4 2.6 2.8 2.9 3.0 3.2 3.4 3.5 3.6 3.7 4.0 4.2 4.4 4.6 5.0 5.2 5.8
SIZE RIM SPEED psi 7 11 14 17 20 23 26 28 31 33 34 37 40 41 43 46 48 50 51 53 57 60 63 67 73 75 84
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
179A8 33.5 65 36.2 66.3 27.2 190.6 AG28.00 Freerolling
30 mph 6620 8430 9760 11110 12210132901435015380
25 mph 7360 9370 1084012350 13570147701594017090
5 mph 9690 121401386015690 174501892020350218702325023920
850/50-30.5 TL
167A8 28.5 192.1 Driving wheel
30 mph 4670 5950 6930 7940 8700 9420 1013010810
T404
25 mph 5190 6610 7690 8820 9660 104701125012020
15 mph 6180 7870 9160 10490 11500124701339014300
5 mph 6850 8560 9810 11070 124701346014430154801638016820
5 mph Cyc 8930 108801218013490 15070165501804019110203002081021320 224502357024030
Twin Implement LI/SS Tires for trailers, implements and agricultural machines
Load data in the table is valid for one wheel only. 30 – 25 mph = 30 and 25 mph road service, either free rolling or driving.
Reference speed and load are shown in bold. 5 mph = 5 mph field service in either free rolling and driving (load capacities of driving wheel are 30% < free rolling wheel).
16 mph = 16 mph road service in driving mode (combine harvesters).
TL = Tubeless, but tube can be used. All tubes have valve type TR218 if no other is specified. 5 mph Cyc = 5 mph cyclic field service for combine harvesters with a gradually increasing load (filling or grain tank) up to max. Load. Min. Load may not exceed 50%
All load data refer to LLV = Low Load Variation (<50%). HLV=High Load Variation (>50%). of max. load. The ground must not have slopes > 20% (> 11 degree).
For dual mounting use the pressure correspondent to the load per each wheel divided by 0.88. In HLV service the LLV load data can be increased by 20 % if the inflation pressure is increased by 30%.
To calculate the right pressure for dual or triple wheel mounting, please refer to page 288. HLV is suitable only for shorter transport service. LLV=Low Load Variation (<50%). HLV=High Load Variation (>50%).
In longer road transport with heavy vehicles or vehicles with a high gravity point, use LLV data with an increase in the inflation pressure of 30%.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire. Implement tires in the steering wheel position on self propelled vehicles must use the load data for driving tires.
134 Twin Implement cross-ply tires - T404 - T421 - T423 - T478 135
T421
Agricultural Multi Purpose Tires.
Low ground pressure tires for field and road.
The cord material and rubber compound allow the tire to be used at speeds up to 70 Km/h
as well as in heavy duty applications.
We recommend this tire for machines and implements with a high degree of road service.
SIZE SIZE
T422 620/50B22.5
650/45B22.5
160D
160D
T423
T422
650/60B26.5 172D
650/55B30.5 * 168D
T428
T428
710/40B22.5 161D T423 750/50B30.5 173D T428
620/55B26.5 166D T421 850/45B30.5 176D T423
* in phase out
T423
T428
136 Twin Ampt cross-ply tires - T421 - T422 - T423 - T428 137
New tire Tire in service PRESSURE
SW OD SLR bar 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.3 4.6
SIZE SW OD RC SRI RIM TYPE SPEED psi
inches inches max max inches inches 14 17 20 23 26 28 31 34 37 40 43 46 48 51 54 57 61 65
inches inches mph
MAX. LOAD lb
43 mph 3730 4130 4510 4870 5180 5470 5890 6320 6720 7120 7330 7530 8010 8530 8800 9030
620/50B22.5
40 mph 4090 4540 4950 5360 5690 6010 6470 6940 7390 7830 8060 8270 8810 9370 9670 9920
160D
24.6 46.1 26.6 48.6 21.1 140 555 AG20.00 TL 25 mph 5570 6170 6740 7290 7740 8170 8810 9450 10040 10650 10960 11240 11980 12740 13140 13490
T423 5 mph 6830 7540 8250 8880 9500 10110 10580 11180 11930 12630 13330 14020 14340 14810 15390 16280 17280 17900
0 9490 10470 11450 12330 13190 14030 14700 15530 16560 17550 18510 19470 19910 20570 21370 22610 24000 24870
138 Twin Ampt cross-ply tires - T421 - T422 - T423 - T428 139
New tire Tire in service PRESSURE
SW OD SLR bar 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.3 4.6
SIZE SW OD max max
RC SRI RIM TYPE SPEED psi 14 17 20 23 26 28 31 34 37 40 43 46 48 51 54 57 61 65
inches inches inches inches mph
inches inches MAX. LOAD lb
43 mph 4920 5470 6000 6530 6930 7320 7930 8530 9030 9530 9930 10330 10790 11230
650/55B30.5
40 mph 5410 6010 6590 7160 7620 8050 8710 9370 9920 10470 10920 11350 11850 12350
168D
25.2 58.7 27.4 60.6 26.6 161.4 700 AG20.00 TL 25 mph 7350 8170 8960 9740 10360 10950 11840 12740 13490 14240 14850 15440 16130 16790
T428 5 mph 9030 9960 10910 11820 12710 13510 14180 15000 16060 17050 17910 18760 19430 20210 20910 21670
0 12530 13840 15150 16400 17660 18770 19690 20840 22300 23680 24870 26050 26980 28060 29050 30090
in phase out
Tires for agricultural machines/vehicles with a high rate of road service or at high speeds
0 = 0 mph concerns accidental loads (e.g. When a machine is breaking/lifting with its bucket).
5 mph = 5 mph concerns field service.
25 - 40 - 43 mph = 25, 40 and 43 mph concerns road service.
Note: Always check that the rims/wheels are suitable for the service. If loads are to exceed 22046 lb, please contact the Trelleborg expert in your area.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
140 Twin Ampt cross-ply tires - T421 - T422 - T423 - T428 141
T404 - T409
Load data in the table is valid for one tire only. Tires for gentle service on green areas
Reference speed, load and inflation pressure are shown in bold.
16 mph = 16 mph concerns service on green areas ond road.
TL = Tubeless. Tubes are not suitable for use in Garden Tractor tires. 25 mph = 25 mph concerns service on road only.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
AF302 SIZE
200/95-12 97A8 T307
SIZE
340/55-16 140A8 AW305
200/95-12 101A8 AF302 360/65-16 148A8 AW305
260/90-13 121A8 AF302 360/70-16 137A8 AW305
260/70-15.3 116A8 AW305 380/55-17 138A8 AW305
260/70-15.3 126A8 AW305 480/45-17 146A8 AW305
260/70-15.3 131A8 AW305 NEW 420/55-17 143A8 T452
300/80-15.3 123A8 T452 NEW 500/50-17 149A8 AW309
NEW 300/80-15.3 141A8 T452 520/50-17 159A8 T306
300/80-15.3 132A8 AW305
T452 300/80-15.3
320/80-15.3
141A8
145A8
AW305
AW305
180/90-16 100A8 AF302
190/90-16 108A8 AF302
200/90-16 111A8 AF302 SIZE Inches Sizes
210/95-16 120A8 AF302 10.0/80-12 8 PR AW305
260/70-16 134A8 AW305 10.0/80-12 10 PR AW305
AW309 Flotation
146 Implement standard cross-ply tires - AW305 - AF302 - T452 - T307 - T306 - AW309 147
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 2.5 2.6 2.8 2.9 3.0 3.2 3.4 3.5 3.6 3.7 3.8 4.0 4.1
SIZE RIM TYPE/TUBE SPEED psi 7 11 14 17 20 23 26 28 31 33 36 37 40 41 43 46 48 50 51 53 54 57 59
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
97A8 7.8 27 8.4 28 12.1 80.1 4.25 TL Freerolling
7.00-12 30 mph 630 790 900 1030 1140 1250 1340 1440
25 mph 690 880 1000 1140 1260 1390 1500 1610
200/95-12
5 mph 910 1150 1300 1460 1610 1760 1920 2060 2180 2250
T307 85A8 12.4 80.6 Driving wheel
30 mph 440 550 640 730 800 890 960 1030
25 mph 490 620 710 800 890 990 1070 1140
5 mph 640 800 910 1030 1140 1260 1370 1470 1540 1590
148 Implement standard cross-ply tires - AW305 - AF302 - T452 - T307 - T306 - AW309 149
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.1
SIZE RIM TYPE/TUBE SPEED psi 7 11 14 17 20 23 26 28 31 34 37 40 43 46 48 51 54 57 59
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
126A8 10.8 29.9 11 30.6 13.1 89.2 9.00 TL Freerolling
10.0/75-15.3 30 mph 940 1190 1370 1540 1690 1840 2000 2160 2330 2480 2630 2780 2880 2980 3170 3370
25 mph 1040 1320 1510 1710 1870 2040 2230 2400 2580 2760 2920 3090 3200 3310 3530 3750
260/70-15.3
5 mph 1370 1710 1940 2180 2410 2610 2810 3030 3250 3470 3680 3900 4100 4300 4430 4600 4780 5060 5200
AW305 114A8 13.9 90.9 Driving wheel
30 mph 660 840 960 1080 1190 1290 1410 1540 1660 1790 1880 1980 2050 2110 2230 2340
25 mph 740 940 1070 1200 1320 1430 1570 1710 1840 1980 2090 2200 2270 2340 2470 2600
5 mph 970 1210 1380 1530 1700 1840 1970 2140 2300 2480 2650 2810 2940 3080 3140 3250 3370 3530 3620
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
150 Implement standard cross-ply tires - AW305 - AF302 - T452 - T307 - T306 - AW309 151
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.5 3.6 3.7 3.8 4.0 4.1 4.6
SIZE RIM TYPE/TUBE SPEED psi 7 11 14 17 20 23 26 28 31 34 37 40 43 46 48 50 51 53 54 57 59 67
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
132A8 11.7 34.3 12.6 35.5 14.6 102.2 9.00 TL Freerolling
11.5/80-15.3 30 mph 1320 1690 1930 2160 2390 2620 2840 3080 3270 3470 3730 3970
25 mph 1480 1870 2140 2400 2660 2910 3160 3420 3640 3860 4130 4410
300/80-15.3
5 mph 1940 2430 2760 3080 3400 3700 4010 4320 4630 4920 5180 5470 5800 6140
AW305 120A8 16 104 Driving wheel
30 mph 940 1190 1370 1530 1710 1880 2030 2160 2290 2410 2590 2780
25 mph 1040 1320 1510 1710 1900 2090 2250 2400 2550 2680 2880 3090
5 mph 1370 1710 1950 2180 2410 2650 2890 3100 3270 3450 3600 3790 4050 4300
152 Implement standard cross-ply tires - AW305 - AF302 - T452 - T307 - T306 - AW309 153
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 2.9 3.0 3.2 3.4 3.5 3.6 3.7 3.8 4.0 4.1 4.6
SIZE RIM TYPE/TUBE SPEED psi 7 11 14 17 20 23 26 28 31 34 37 40 41 43 46 48 50 51 53 54 57 59 67
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
108A8 7.6 29.4 8.1 30.4 13 87.5 4.50E TL Freerolling
6.50/7.00-16 30 mph 740 950 1080 1220 1360 1490 1610 1740 1860 1980
25 mph 830 1050 1200 1360 1510 1650 1800 1930 2070 2200
190/90-16
5 mph 1080 1360 1540 1730 1920 2090 2280 2460 2620 2790 2950 3120
AF302 96A8 13.5 88.4 Driving wheel
30 mph 520 660 760 870 960 1050 1140 1220 1310 1410
25 mph 580 740 850 960 1070 1170 1270 1360 1470 1570
5 mph 760 960 1090 1220 1370 1490 1610 1730 1840 1960 2090 2220
154 Implement standard cross-ply tires - AW305 - AF302 - T452 - T307 - T306 - AW309 155
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.5 0.8 1.2 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6
SIZE RIM TYPE/TUBE SPEED psi 7 11 17 23 26 28 31 34 37 40 43 46 48 51 54 57 60 63 67
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
140A8 13.5 30.6 14.6 31.8 13.1 91.8 11.00 TL Freerolling
13.0/55-16 30 mph 1250 1590 2040 2480 2680 2880 3120 3370 3570 3770 3940 4090 4270 4440 4700 4960
25 mph 1390 1760 2270 2760 2980 3200 3470 3750 3970 4190 4370 4540 4740 4940 5220 5510
340/55-16
5 mph 1830 2280 2900 3510 3790 4080 4340 4640 4980 5300 5580 5830 6040 6290 6500 6750 7030 7350 7720
156 Implement standard cross-ply tires - AW305 - AF302 - T452 - T307 - T306 - AW309 157
New tire Tire in service PRESSURE
LI/SS SW OD SW OD SLR RC bar 0.8 1.2 1.6 2.0 2.4 2.8
SIZE RIM TYPE/TUBE SPEED psi 11 17 23 28 34 40
inches inches max max inches inches
inches inches mph
MAX. LOAD lb
138A8 16.4 35.3 17.8 36.5 15.5 102.6 13.00-17 TL Freerolling
30 mph 2270 2920 3570 4110 4760 4110
25 mph 2520 3240 3970 4560 5290 6010
420/55-17
5 mph 3530 4540 5560 6390 7400 6390
T452 126A8 - - Driving wheel
30 mph 1620 2090 2560 2940 3410 3870
25 mph 1810 2330 2830 3260 3780 4300
5 mph 2520 3250 3970 4570 5290 6020
158 Implement standard cross-ply tires - AW305 - AF302 - T452 - T307 - T306 - AW309 159
INCHES SIZES INCHES SIZES
Implement Standard In longer road transports with heavy vehicles or vehicles with a high gravity point, use LLV data and increase the inflation pressure with 30%.
Tires for trailers, implements and agricultural machines. Load data is valid for one wheel.
Free rolling tires on tractor steering wheels - use LLV free rolling data minus 20%.
Reference speeds, pressures and loads are shown in bold.
Speed 30 to 25 = 30 to 25 mph road service, either free rolling or driving. LI/SS = Load Index / Speed Symbol
Speed 5 = 5 mph field service, either free rolling or driving TL =Tubeless, but tube can be used
All load data refer to LLV service
LLV = Low Load Variation (>50%).
HLV = High Load Variation (50%)
In HLV service the LLV load data can be increased by 20% if the inflation pressure is increased by 30%. IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
HLV in road speeds are suitable for shorter transport service only.
160 Implement standard cross-ply tires - AW305 - AF302 - T452 - T307 - T306 - AW309 161
RIB TRAILER
SIZE
555/45-17 154F Rib Trailer
PRESSURE
SW OD SLR RC RIM TYPE SPEED bar 1.0 1.4 1.8 2.2 2.6 3.0 3.4 3.8 4.2 4.6 5.0 5.4 5.8 6.2 6.6 7.0
SIZE inches inches inches inches
SRI mph psi 14 20 26 31 37 43 48 54 60 65 71 77 83 88 94 100
MAX. LOAD lb H (*)
Freerolling
555/45-17
50 2650 3230 3740 4200 4630 5040 5420 5790 6130 6470 6780 7100 7410 7710 7990 8270
154F 21.7 36.7 17.2 112.8 - 16.00 TL
Rib Trailer 25 3040 3710 4300 4830 5320 5800 6240 6660 7050 7440 7800 8170 8520 8860 9190 9510
5 4760 5810 6720 7560 8330 9070 9760 10420 11030 11650 12210 12780 13340 13870 14390 14880
TL = Tubeless
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
SIZE SIZE
320/85-24 127A8 (124B) T410 420/85-34 147A8 (144B) T410
380/85-24 137A8 (134B) T410 460/85-34 152A8 (149B) T410
380/85-28 139A8 (136B) T410 420/85-38 149A8 (146B) T410
420/85-28 144A8 (141B) T410 460/85-38 154A8 (151B) T410
420/85-30 145A8 (142B) T410 520/85-38 160A8 (157B) T410
460/85-30 150A8 (147B) T410
Load data in the table is valid for one wheel only. Tractor tires for Agroforest use
Reference speed and load are shown in bold. 5-20-25-30 mph = 5-20-25-30 mph road service.
5 mph HT = 5 mph service in terrain with or without stones/rocks.
TT = Tube type. All tubes have valve type TR218 if not other is specified.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
TWIN 422
It guaranties extra pull force and brilliant accessibility. Without tracks and chains it assures
optimum grip.
The open tread pattern maximizes the self cleaning capacity.
TWIN 428
Designed to provide excellent pull force in tough, clayey terrain as well as on ice and snow,
either with or without the assistance of tracks and chains. The load is spread across a large
contact area, which gives the tire a low ground bearing pressure, and puts minimum strain on
the vehicle.
172 Twin Forestry cross-ply tires - T404 - T414 - T421 SB - T422 SB - T428 SB 173
LI/SI New tire Tire in service PRESSURE * Infl. Pressure
SIZE ROAD FOREST FOREST SW OD SW OD SLR RC SRI RIM TUBE SPEED bar 1.6 2.0 2.4 2.7 3.0 3.2 3.5 3.8 4.0 4.2 4.5 4.7 5.0 5.2 5.4 5.6 with tracks
HT LT max max mph psi 23 28 34 39 43 46 50 55 57 60 64 67 72 75 77 80 Bar
inches inches inches inches MAX. LOAD lb
25 mph road 5510 6260 6940 7460 7960 8270 8900 9510 9920
5 mph HT, LTe 6590 7720 8590 9130 9720 100901069011270 11570 1204012730 1319013890 6.0
600/55-26.5 LS2 5 mph HT. HTe 5510 6260 6940 7460 7960 8270 8900 9510 9920 6.0
160A8 160A2 167A2 23.6 52.8 24.8 54.1 24.6 158.3 625 AG20.00 600/55-26.5 5 mph HT, VHTe 4370 5080 5740 6150 6550 6750 7120 7500 7710 7960 8300 8590 9040 9340 9620 9920 6.0
T428 SB 5 mph LT, LTe 8110 9490 10560 11230 11960 124101316013890 14270 1478015560 1605016820 6.0
5 mph LT. HTe 6780 7710 8540 9190 9810 102001089011570 12020 6.0
5 mph LT, VHTe 5370 6250 7070 7570 8050 8300 8760 9240 9490 9810 10240 1055011050 1139011680 12020 6.0
174 Twin Forestry cross-ply tires - T404 - T414 - T421 SB - T422 SB - T428 SB 175
LI/SI New tire Tire in service PRESSURE * Infl. Pressure
SIZE ROAD FOREST FOREST SW OD SW OD SLR RC SRI RIM TUBE SPEED bar 1.6 2.0 2.4 2.7 3.0 3.2 3.5 3.8 4.0 4.2 4.5 4.7 5.0 5.2 5.4 5.6 with tracks
HT LT max max mph psi 23 28 34 39 43 46 50 55 57 60 64 67 72 75 77 80 Bar
inches inches inches inches MAX. LOAD lb
25 mph road 6010 6850 7610 8190 8740 9090 9720 10340 10750 11090 11590 11890 12350
5 mph HT, LTe 7190 8410 9380 9990 10650 11060 11730 12380 12730 13180 13900 14350 15050 15400 15730 16050 6.0
710/45-26.5 LS2 5 mph HT. HTe 6010 6850 7610 8190 8740 9090 9720 10340 10750 11090 11590 11890 12350 6.0
168A8 168A2 175A2 28 52.8 29.4 53.4 24.6 158.3 625 AG24.00 700/50-26.5 5 mph HT, VHTe 4760 5540 6260 6720 7150 7390 7800 8220 8450 8740 9130 9410 9870 10170 10450 10750 6.0
T428 SB 5 mph LT, LTe 8840 10340 11530 12290 13120 13570 14340 15070 15430 16050 16990 17590 18520 18950 19370 19780 6.0
5 mph LT. HTe 7390 8420 9370 10030 10650 11020 11850 12680 13230 13650 14260 14650 15210 6.0
5 mph LT, VHTe 5850 6810 7710 8270 8810 9090 9590 10080 10320 10650 11070 11450 12050 12440 12830 13230 6.0
176 Twin Forestry cross-ply tires - T404 - T414 - T421 SB - T422 SB - T428 SB 177
LI/SI New tire Tire in service PRESSURE * Infl. Pressure
SIZE ROAD FOREST FOREST SW OD SW OD SLR RC SRI RIM TUBE SPEED bar 1.6 2.0 2.4 2.7 3.0 3.2 3.5 3.8 4.0 4.2 4.5 4.7 5.0 5.2 5.4 5.6 with tracks
HT LT max max mph psi 23 28 34 39 43 46 50 55 57 60 64 67 72 75 77 80 Bar
inches inches inches inches MAX. LOAD lb
25 mph road 6940 7930 8820 9470 10090 10470 11330 12200 12790 13130 13610 13910 14330
5 mph HT, LTe 8310 9720 10850 11560 12350 12800 13560 14270 14660 15310 16270 16930 17900 18230 18540 18830 6.0
750/45-30.5 LS2 5 mph HT. HTe 6940 7930 8820 9470 10090 10470 11330 12200 12790 13130 13610 13910 14330 6.0
700/50-30.5
173A8 173A2 180A2 29.5 57.7 31 58.9 27.6 173 685 AG24.00 5 mph HT, VHTe 5500 6400 7240 7770 8290 8560 9040 9510 9770 10090 10520 10920 11540 11950 12380 12790 6.0
800/45-30.5
T428 SB 5 mph LT, LTe 10220 11960 13300 14130 15050 15610 16530 17430 17900 18710 19900 20710 21910 22340 22740 23120 6.0
Replaces
LI 169A8 5 mph LT. HTe 8540 9700 10750 11550 12310 12790 13860 14930 15650 16090 16710 17100 17640 6.0
5 mph LT, VHTe 6770 7880 8900 9530 10130 10450 11020 11610 11920 12310 12830 13350 14120 14620 15150 15650 6.0
178 Twin Forestry cross-ply tires - T404 - T414 - T421 SB - T422 SB - T428 SB 179
Tires for New tire Tire in service PRESSURE
all-round service SW OD SW OD SLR RC SRI RIM TUBE SPEED bar 0.8 1.2 1.6 2.0 2.4 2.8 3.0 3.2 3.5 3.8 4.0 4.2 4.5 4.7 4.9 5.2 5.4 5.6
SIZE PR max max mph psi 12 17 23 28 34 40 43 46 50 55 57 60 64 67 71 75 77 80
inches inches inches inches MAX. LOAD lb
20 mph road 1790 2270 2690 3060 3410 3730 3880 4020 4240
400/60-15.5
5 mph light terrain 2560 3250 3850 4380 4870 5320 5540 5750 6070
14 15.7 34.4 17.2 35.7 - 103.1 405 AG13.00 400/60-15.5
T404 5 mph heavy terrain 1790 2270 2690 3060 3410 3730 3880 4020 4240
5 mph very heavy terrain 1470 1860 2200 2510 2790 3050 3190 3300 3480 3650 3760 3870 4030 4130 4240
Tires for LI/SI New tire Tire in service PRESSURE * Infl. Pressure
all-round service SPEED bar 1.6 2.0 2.4 2.7 3.0 3.2 3.5 3.8 4.0 4.2 4.5 4.7 with tracks
ROAD FOREST FOREST SW OD SW OD SLR RC SRI RIM TUBE
HT LT max max mph psi 23 28 34 39 43 46 50 55 57 60 64 67 Bar
SIZE
inches inches inches inches MAX. LOAD lb
25 mph road 4190 4800 5360 5700 6000 6170 5.0
5 mph HT, LTe 5020 5860 6560 7010 7510 7730 8110 8490 8640 5.0
500/60-22.5 5 mph HT. HTe 4190 4800 5360 5700 6000 6170 5.0
144A8 144A2 151A2 19.7 46.1 20.7 47.2 - 138.8 550 AG16.00 500/60-22.5 5 mph HT, VHTe 3320 3860 4380 4710 5020 5190 5480 5720 5830 6000 6190 5.0
T421 SB 5 mph LT, LTe 6060 7100 8000 8620 9260 9520 100101046010650 5.0
5 mph LT. HTe 5070 5860 6610 7020 7390 7610 5.0
5 mph LT, VHTe 4010 4670 5300 5730 6150 6390 6760 7050 7190 7390 7640 5.0
180 Twin Forestry cross-ply tires - T404 - T414 - T421 SB - T422 SB - T428 SB 181
Driving tires LI/SI New tire Tire in service
for single axle fitment PRESSURE
SPEED
SIZE ROAD FOREST FOREST SW OD SW OD SLR RC SRI RIM TUBE mph bar 1.0 1.6 2.0 2.4 2.7 3.0 3.2 3.4 3.5
HT LT max max psi 14 23 28 34 38 43 46 48 50
inches inches inches inches MAX. LOAD lb
25 mph road 4070 6390 7260 8050
5 mph HT light terrain 5050 7650 8950 9950 10580 11270
600/60-30.5 5 mph HT heavy terrain 4070 6390 7260 8050
153A8 153A2 160A2 23.6 58.9 25.1 60.8 - 176.6 700 AG20.00 600/60-30.5 5 mph HT very heavy terrain 3410 5060 5900 6660 7130 7580 7830 8120
T-414 FS 5 mph LT light terrain 6170 9360 10960 12210 13020 13890
5 mph LT heavy terrain 4980 7830 8920 9920
5 mph LT very heavy terrain 4170 6190 7220 8160 8750 9330 9630 10020
Twin Forestry LI/SS-design Tires for forestry use Twin Forestry PR-design Tires for forestry use
Load data in the table is valid for one wheel only. 25 mph road = 25 mph road service.5 mph HT, LTe = High torque, also refers to Load data in the table is valid for one wheel only. 25 – 20 mph = 25 and 20 mph road service.
Reference speed and load are shown in bold. Skidder service in Light terrain = 5 mph service in flat terrain without Reference speed and load are shown in bold. 5 mph HT or 5 mph LT Light terrain = 5 mph service in flat terrain
All tires are tube type. All tubes have valve type TR218. boulders/stones. Most of the tires are tube type. All tubes have valve TR218. without occurence of stone blocks.
SB = Steel belt reinforced. 5 mph HT, HTe = High torque, also refers to Skidder service in Heavy terrain = 5 Some tires are marked tubeless but it is recoinchesended to use tube. 5 mph HT or 5 mph LT Heravy terrain = 5 mph in rought terrain with ot
LS = Log service, 2 = Tread code. mph service in rough terrain with or without boulders/stones. SB = Steel belt reinforced. without stone blocks.
HT = High torque, also refers to Skidder service. 5 mph HT, VHTe = High torque, also refers to Skidder service in Very Heavy terrain Tire for all-round service = can be used on all type of machine and in 5 mph HT or 5 mph LT Very Heavy terrain = 5 mph in very rough terrain
LT = Low torque and refers to service on forwarders and harvesters. = 5 mph service in very rough terrain with very high proportion of boulders/stones. tandem position with track. with very large occurence of stone blocks.
5 mph LT, LTe = Low torque and refers to service on forwarders and harvesters in Tire for single axle fitment = can only be used on single axles. * When using track the inflation pressure according to the table must be
Light terrain = 5 mph service in flat terrain without boulders/stones. used independent of the wheel load. Twin 428 only.
5 mph LT, HTe = Low torque and refers to service on forwarders and harvesters in By use of tracks, the air pressure shall be increased to max. level for
Heavy terrain = 5 mph service in rough terrain with or without boulders/stones. what is started by very heavy terrain.
5 mph LT, VHTe = Low torque and refers to service on forwarders and harvesters in
Very Heavy terrain = 5 mph service in rough terrain with very high proportion of
boulders/stones.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire. IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
182 Twin Forestry cross-ply tires - T404 - T414 - T421 SB - T422 SB - T428 SB 183
T418 SKIDDER
24.5-32
16 25.2 71.7 25.7 72.8 32.7 214 DH21 in preparation
T418 FS
PRESSURE
New tire Tire in service SPEED bar 0.8 1.0 1.2 1.4 1.6 1.7 1.8 2.0 2.1 2.4
PR SW OD SW OD SLR RC RIM TUBE mph psi 12 15 17 20 23 25 26 29 30 35
SIZE
max max MAX. LOAD lb
inches inches inches inches
30.5L-32
20 30.5 74 31.1 75 33.3 - DH27 in preparation
T418 FS
20 - 25 road = 20 and 25 mph road service. 5 mph HT or 5 mph LT Heavy terrain = 5 mph in rought terrain with or
5 mph HT or 5 mph LT Light terrain = 5 mph service in flat terrain without stone blocks.
without occurrence of stone blocks. 5 mph HT or 5 mph LT very Heavy terrain = 5 mph in very rough terrain
with very large occurrence of stone blocks.
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
PRESSURE
SW OD SLR RC PERMITTED SPEED bar 23 26 29 32 35 38 41 44 46 49 52 61 64
SIZE inches inches inches inches
RIM TYPE/TUBE mph
RIM psi 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 4.2 4.4
MAX. LOAD lb
30 mph S 2890 3430 3910 4180 4450 4720 4990 5290 5490 5780 6010
340/80R18 25 mph S 2890 3430 3910 4180 4450 4720 4990 5290 5490 5780 6010
(12.5-18)
22 mph S 2940 3490 3990 4270 4540 4820 5090 5400 5590 5890 6130
W10-11SDC
13.6 39.4 - - 11 TL 20 mph S 3010 3570 4070 4340 4630 4910 5190 5500 5700 6010 6250
143A8 (143B) W11-12-12SDC
15 mph S 3060 3640 4140 4430 4720 5000 5290 5610 5810 6120 6370
TH400 5 mph Cyc S 3510 4370 5100 5520 5890 6220 6590 7090 7450 7830 8230 8600 9020
Stat S 5370 6690 7830 8450 9030 9530 10100 10860 11420 11990 12620 13220 13820
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
PRESSURE
SW OD SLR RC PERMITTED SPEED bar 23 26 29 32 35 38 41 44 46 49 52 61 64
SIZE inches inches inches inches
RIM TYPE/TUBE mph
RIM psi 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 4.2 4.4
MAX. LOAD lb
30 mph S 3260 3870 4410 4720 5030 5320 5630 5970 6180 6510 6780
400/70R18 25 mph S 3260 3870 4410 4720 5030 5320 5630 5970 6180 6510 6780
(15.5/70-18)
22 mph S 3330 3950 4500 4810 5130 5430 5740 6100 6320 6650 6920
15.9 40 - - 13 12 - 12SDC TL 20 mph S 3400 4020 4590 4910 5220 5540 5850 6210 6440 6780 7050
147A8 (147B)
15 mph S 3450 4100 4670 5000 5320 5640 5970 6330 6560 6900 7190
TH400 5 mph Cyc S 3960 4930 5770 6230 6650 7020 7440 7990 8410 8830 9290 9700 10170
Stat S 6050 7550 8830 9550 10190 10760 11400 12250 12890 13530 14240 14910 15600
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
PRESSURE
SW OD SLR RC PERMITTED SPEED bar 23 29 35 38 41 44 46 49 52 55 58 61 64
SIZE inches inches inches inches
RIM TYPE/TUBE mph
RIM psi 1.6 2.0 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4
MAX. LOAD lb
30 mph S 3760 4460 5090 5450 5800 6150 6500 6890 7140 7520 7830
400/70R24 25 mph S 3760 4460 5090 5450 5800 6150 6500 6890 7140 7520 7830
(16.0/70-24)
22 mph S 3840 4550 5190 5560 5910 6270 6640 7030 7290 7670 7990
15.9 46.1 - - W13 W12 - W14L TL 20 mph S 3910 4640 5290 5670 6030 6390 6760 7160 7430 7820 8150
152A8 (152B)
15 mph S 3990 4730 5400 5780 6140 6510 6890 7310 7570 7970 8300
TH400 5 mph Cyc S 4560 5690 6660 7190 7670 8100 8590 9230 9710 10200 10730 11200 11740
Stat S 6990 8720 10200 11010 11760 12410 13150 14140 14880 15620 16440 17220 18000
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
PRESSURE
SW OD SLR RC PERMITTED SPEED bar 23 29 35 38 41 44 46 49 52 55 58 61 64
SIZE inches inches inches inches
RIM TYPE/TUBE mph
RIM psi 1.6 2.0 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4
MAX. LOAD lb
30 mph S 4890 5820 6640 7090 7550 8010 8470 8970 9300 9790 10200
440/80R24 25 mph S 4890 5820 6640 7090 7550 8010 8470 8970 9300 9790 10200
(16.9-24)
22 mph S 4990 5930 6770 7230 7710 8170 8640 9160 9490 9990 10410
DW15L - 14
17.5 51.7 - - DW14L TL 20 mph S 5090 6050 6900 7370 7850 8330 8810 9340 9680 10190 10600
161A8 (161B) TW - 14L
15 mph S 5190 6160 7030 7520 8000 8490 8970 9510 9870 10380 10810
TH400 5 mph Cyc S 5940 7410 8660 9370 10000 10550 11180 12020 12640 13270 13980 14580 15300
Stat S 9100 11350 13280 14350 15310 16170 17130 18420 19380 20350 21420 22430 23460
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
PRESSURE
SW OD SLR RC PERMITTED SPEED bar 23 26 29 32 35 38 41 44 46 49 52 61 64
SIZE inches inches inches inches
RIM TYPE/TUBE mph
RIM psi 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 4.2 4.4
MAX. LOAD lb
30 mph S 4630 5500 6270 6710 7140 7570 8010 8490 8800 9260 9650
460/70R24 25 mph S 4630 5500 6270 6710 7140 7570 8010 8490 8800 9260 9650
(17.5L-24)
22 mph S 4730 5610 6400 6850 7290 7730 8170 8660 8970 9450 9840
DW14L-DW16L
18.3 49.2 - - DW15L TL 20 mph S 4820 5720 6530 6980 7430 7880 8330 8830 9150 9630 10030
159A8 (159B) 14-16-TW14L
15 mph S 4920 5830 6650 7110 7570 8040 8490 9010 9330 9820 10230
TH400 5 mph Cyc S 5620 7010 8200 8860 9460 9990 10570 11360 11960 12560 13220 13800 14470
Stat S 8610 10740 12570 13580 14480 15300 16200 17430 18330 19250 20260 21220 22190
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
PRESSURE
SW OD SLR RC PERMITTED SPEED bar 23 26 29 32 35 38 41 44 46 49 52
SIZE inches inches inches inches
RIM TYPE/TUBE mph
RIM psi 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
MAX. LOAD lb
30 mph S 5750 6250 6750 7300 7840 8330 8830 9380 9920
480/80R26 25 mph S 5750 6250 6750 7300 7840 8330 8830 9380 9920
(18.4-26)
22 mph S 5880 6380 6890 7440 8000 8510 9020 9570 10120
19.1 56.2 - - DW15L DW16L TL 20 mph S 5990 6500 7020 7580 8160 8680 9190 9760 10320
160A8 (160B)
15 mph S 6110 6640 7150 7740 8310 8840 9370 9940 10520
TH400 5 mph Cyc S 7140 7890 8630 9450 10260 11010 11830 12790 13590 14190 14880
Stat S 10950 12090 13240 14480 15730 16880 18130 19590 20830 21830 22820
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
PRESSURE
SW OD SLR RC PERMITTED SPEED bar 23 26 29 32 35 38 41 44 46 49 52
SIZE inches inches inches inches
RIM TYPE/TUBE mph
RIM psi 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6
MAX. LOAD lb
30 mph S 5110 5560 6000 6480 6970 7410 7850 8330 8820
440/80R28 25 mph S 5110 5560 6000 6480 6970 7410 7850 8330 8820
(16.9-28)
22 mph S 5220 5680 6120 6610 7110 7560 8010 8510 8990
17.5 55.5 - - DW14L DW15L TL 20 mph S 5320 5790 6240 6750 7250 7710 8170 8680 9170
156A8 (156B)
15 mph S 5420 5900 6360 6880 7390 7860 8320 8840 9350
TH400 5 mph Cyc S 6350 7010 7670 8400 9130 9790 10520 11360 12080 12610 13230
Stat S 9720 10750 11760 12870 13990 15000 16120 17420 18520 19400 20280
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
T409 T409
Tire suitable for road work.
SIZE SIZE
600/50-22.5 161A8 T428 EXC NEW 480/70B28 157A8 T459
650/45-22.5 162A8 T422 EXC NEW 520/70B30 162A8 T459
710/40-22.5 163A8 T428 EXC NEW 520/70B34 171A8 T459
420/70B24 154A8 T459 620/60B34 175A8 T459
23.1-26 158A8 T409
PRESSURE
SW OD SLR RC SRI PERMITTED bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0
SIZE inches inches inches inches
RIM TYPE SPEED
RIM psi 11 14 17 20 23 26 28 31 34 37 40 43 46 48 51 54 57
mph
MAX. LOAD lb
30 mph 2890 3310 3710 4130 4540 4920 5290 5650 6010 6400 6810 7210 7610 7980 8360 8730 9090
600/50-22.5
25 mph 3170 3630 4090 4540 4940 5370 5790 6210 6610 7030 7450 7860 8270 8740 9230 9710 10200
161A8 24.2 46.5 - - 550 AG20.00 TL
T428 EXC 5 mph 4220 4760 5310 5850 6330 6830 7340 7840 8330 8830 9330 9820 10320 10890 11460 12050 12630
0 7310 8360 9390 10440 11350 12330 13300 14260 15210 16170 17130 18080 19010 20110 21220 22330 23460
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
196 Rear Tractor Industrial cross-ply tires - T459 -T409 -T422 EXC -T428 EXC 197
PRESSURE
SW OD SLR RC SRI PERMITTED bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0
SIZE inches inches inches inches
RIM TYPE SPEED
RIM psi 11 14 17 20 23 26 28 31 34 37 40 43 46 48 51 54 57
mph
MAX. LOAD lb
30 mph 2980 3410 3840 4250 4670 5060 5430 5810 6170 6590 7000 7410 7830 8210 8600 8980 9370
650/45-22.5
25 mph 3270 3750 4210 4680 5200 5610 6010 6400 6780 7220 7660 8100 8540 9020 9500 9990 10470
162A8 25.6 45.7 - - 540 AG20.00 TL
T422 EXC 5 mph 4350 4920 5480 6040 6670 7150 7630 8090 8540 9070 9600 10130 10660 11230 11810 12390 12970
0 7540 8610 9690 10770 11970 12910 13830 14730 15600 16610 17630 18640 19640 20750 21860 22970 24090
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
PRESSURE
SW OD SLR RC SRI PERMITTED bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0
SIZE inches inches inches inches
RIM TYPE SPEED
RIM psi 11 14 17 20 23 26 28 31 34 37 40 43 46 48 51 54 57
mph
MAX. LOAD lb
30 mph 3080 3520 3960 4400 4810 5210 5610 6010 6390 6810 7220 7640 8050 8510 8970 9450 9920
710/40-22.5
25 mph 3380 3870 4350 4840 5360 5780 6170 6570 6940 7410 7880 8340 8820 9300 9780 10260 10750
163A8 28.3 46.1 - - 535 AG24.00 TL
T428 EXC 5 mph 4500 5080 5650 6240 6870 7360 7840 8300 8750 9310 9880 10440 11000 11570 12160 12730 13320
0 7780 8900 10010 11120 12320 13270 14200 15100 15970 17040 18120 19200 20280 21380 22500 23610 24720
Design data = the dimensions of size in design data are calculated dimensions and not measured data on the normal production tire
PRESSURE
SW OD SLR RC SRI PERMITTED bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0
SIZE inches inches inches inches
RIM TYPE SPEED
RIM psi 11 14 17 20 23 26 28 31 34 37 40 43 46 48 51 54 57
mph
MAX. LOAD lb
420/70B24 30 mph 2450 2790 3140 3490 3860 4140 4420 4680 4940 5250 5560 5860 6170 6530 6890 7240 7610
154A8 25 mph 2690 3060 3450 3840 4190 4500 4800 5080 5360 5740 6140 6540 6940 7280 7620 7940 8270
16.5 47.2 17.8 48.8 22.4 144.1 W13 TL
5 mph 3570 4020 4490 4950 5370 5730 6080 6430 6750 7220 7690 8180 8660 9060 9460 9850 10240
T459 0 6170 7050 7940 8820 9630 10350 11030 11700 12320 13220 14130 15050 15970 16740 17500 18270 19010
198 Rear Tractor Industrial cross-ply tires - T459 -T409 -T422 EXC -T428 EXC 199
New tire Tire in service PRESSURE
SW OD SLR bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2
SIZE SW OD RC RIM TYPE/TUBE SPEED psi
inches inches max max inches inches 11 14 17 20 23 26 28 31 34 37 40 43 46
inches inches mph
MAX. LOAD lb
520/70B30 30 mph 3760 4300 4840 5380 5840 6310 6750 7190 7610 8110 8620 9140 9650
162A8 25 mph 4130 4730 5310 5910 6390 6880 7360 7820 8270 8820 9370 9920 10470
20.3 59.1 21.9 60.7 27.6 176.7 W16L TL
5 mph 5490 6210 6910 7620 8190 8770 9340 9890 10420 11080 11740 12400 13060
T459 0 9510 10870 12220 13580 14700 15830 16930 17990 19010 20280 21550 22820 24090
IMPORTANT: the inflation pressure is established considering the application and the load for each tire.
200 Rear Tractor Industrial cross-ply tires - T459 -T409 -T422 EXC -T428 EXC 201
LIGHT INDUSTRIAL TIRES
A large range of tires from 3" to 16" in rim diameter in different sizes and tread designs.
These tires can be used in farming, industrial and green area applications.
Trelleborg offers a complete wheel solution.
High Speed tire with high Farming tire with traction pattern. Industry tire with combined Combined pattern for green area Industry, farming and green area High Speed or industry tire with Tire especially made for snow Industry tire with good grip and
shoulder profile. pattern. and farming. tire with smooth pattern. high shoulder. machines. low roll resistance.
Combined pattern for green area Combined pattern for green area Tire for small compact machines Farming tire especially made for High Speed tire with combined Farming tire with combined Combined tire for green Combined tire for green area,
and farming. and farming. used for digging, drilling and ploughing. pattern. pattern. area, farming and industry. farming, industry or high speed
loading. service.
T439 T446 T448 T462 T550 T559 TURF GRIP T560 ICE T690
Farming and green area tire with Farming tire with easy rolling Farming tire with extra strong Farming tire with traction Skid Steer tire with good grip Combined tire for green area, For detachable chairlifts. High Speed tire with high
round shoulder profile. pattern. tread and easy rolling pattern. pattern. and comfort. farming and industry. Designed to perfectly work at shoulder.
very low temperature.
Wide farming, garden and snow High speed tire with easy rolling Farming tire with especially easy Farming tire with extra good Combined tire for farming and Industry and farming tire with Tire for green areas with Farming tire with good grip.
tire with traction pattern. pattern. rolling pattern. sidewall stability. seeding. rounded shoulder. good grip.
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. SPEED RC TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS +/-1.5% +/-2% bar lb mph +/-2.5% PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
2.50-3 4 T510 Industrial 1.50-3 1.75X3 8.5 2.9 8 280 16 25.3 3.00-4 4 T513 Industrial 2.10-4 2.5-5 10.7 3.3 3.5 230 20 31.8
PRESSURE PRESSURE
psi 14 21 28 36 43 51 57 65 72 79 86 93 100 108 115 psi 7 12 15 17 20 23 26 29 32 35 38 41 44 46 51
bar 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.5
MAX. LOAD lb MAX. LOAD lb
40 60 80 100 120 130 140 150 170 180 190 190 200 210 220 230 25 70 90 100 110 120 130 140 150 160 170 180 180 190 200 210
25 70 90 110 130 140 140 170 180 190 200 210 220 220 230 240 20 80 100 110 120 130 140 150 170 180 190 200 200 210 220 230
16 80 100 120 140 150 170 190 200 210 220 230 240 250 260 280 5 100 130 140 150 170 190 200 210 230 240 250 260 280 290 300
5 100 130 150 190 200 220 240 250 280 290 300 320 330 340 360
PRESSURE PRESSURE
psi 14 21 28 36 43 51 57 65 72 79 86 psi 7 12 15 17 20 23 26 29 32 35 38 41
bar 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8
MAX. LOAD lb MAX. LOAD lb
30 130 170 200 220 250 260 300 320 330 350 370 25 120 150 180 200 220 240 250 260 290 300 320 330
25 130 180 210 230 260 290 310 330 350 370 400 20 130 180 200 220 240 260 280 300 320 330 350 360
16 150 200 230 260 300 320 350 370 400 420 440 5 170 230 250 290 310 340 350 390 410 430 450 470
5 200 250 300 340 390 420 460 490 520 540 570
PRESSURE PRESSURE
psi 7 12 15 17 20 23 26 29 32 35 38 41 44 46 49 52 55 58 62 psi 7 9 10 12 13 15 16 17 19 20 22
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 bar 0.5 0.6 0.7 0.8 0.9 1.0 1.0 1.2 1.3 1.4 1.5
MAX. LOAD lb MAX. LOAD lb
25 FR 110 140 150 180 200 210 230 240 250 260 290 300 310 320 330 340 350 360 370 25 100 110 120 130 140 150 150 170 180 190 200
20 FR 120 150 180 200 220 230 250 260 290 300 320 330 340 350 360 370 400 410 420 16 110 120 140 150 170 170 180 190 200 210 220
5 FR 150 200 230 250 290 300 330 340 370 390 410 430 440 450 470 490 510 530 540 9 120 150 170 180 190 190 200 210 230 240 250
25 DrW 80 100 110 130 140 150 160 170 180 190 200 210 220 230 240 240 250 260 260 5 130 140 180 190 200 200 210 230 240 250 260
20 DrW 90 110 120 140 150 170 180 190 200 210 220 230 240 250 260 260 280 290 300
5 DrW 110 140 150 190 200 210 230 240 250 280 290 300 310 330 340 340 350 370 390
PRESSURE PRESSURE
psi 11 17 23 28 34 40 46 51 57 60 63 67 71 73 75 77 80 83 86 psi 7 12 15 17 20 23 26 29 32 35 38 41 44
bar 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.2 4.4 4.6 4.8 5.0 5.2 5.4 5.6 5.8 6.0 bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
MAX. LOAD lb MAX. LOAD lb
30 FR 140 190 220 260 300 340 360 410 440 450 460 460 470 470 480 490 490 490 500 25 120 150 170 190 210 230 240 250 280 290 300 320 330
25 FR 170 210 240 290 330 370 410 450 490 500 510 510 520 520 520 530 540 540 550 20 130 170 190 210 230 250 260 290 310 320 330 350 360
5 FR 210 260 320 360 420 460 520 560 620 640 670 690 700 710 710 720 730 730 740 5 170 210 240 280 300 330 340 370 400 410 430 450 470
30 DrW 100 130 150 190 210 230 250 290 310 320 320 330 340 340 340 340 340 350 350
25 DrW 110 140 180 210 230 260 290 320 350 360 360 370 370 380 380 390 390 390 400
5 DrW 140 190 220 260 300 330 360 400 430 450 470 500 500 510 520 520 520 530 530
PRESSURE
psi 7 12 15 17 20 23 26 29 32 35 38 41 44
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
MAX. LOAD lb
TIRES 5"
25 120 150 170 190 210 230 240 250 280 290 300 320 330
20 130 170 190 210 230 250 260 290 310 320 330 350 360
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX.
SPEED
RC 5 170 210 240 280 300 330 340 370 400 410 430 450 470
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
new 100/75-5 42A8 T539 TL Green Area 3.00Ax5 10.9 3.9 3.2 330 25 32.7
PRESSURE
psi 7 12 15 17 20 23 26 29 32 35 38 41 44 46 49 52 54 TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX.
SPEED
RC
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.7 +/-1.5% +/-2% bar lb +/-2.5%
4.10/3.50-6 57J T533 HS High Speed 2.50A-6 12.6 3.7 4.5 510 60 37.4
MAX. LOAD lb
30 FR 90 120 130 150 170 190 200 220 230 250 260 280 290 300 PRESSURE
25 FR 100 130 150 170 190 210 220 240 250 280 300 310 320 330 psi 7 15 22 29 36 44 51 58 65
5 FR 140 180 200 210 230 250 290 310 330 350 360 390 410 430 440 450 460 bar 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
30 DrW 40 110 120 130 140 150 170 180 190 200 210 210 MAX. LOAD lb
25 DrW 60 120 130 140 150 180 190 200 210 220 230 230 60 140 210 260 320 360 400 440 470 510
5 DrW 80 170 190 200 210 230 240 260 280 300 310 320 320 330 50 150 220 280 330 370 410 460 500 530
40 150 230 290 350 400 440 490 520 560
25 170 240 310 360 420 450 510 540 580
20 180 260 330 400 450 500 550 600 640
13 220 320 400 490 550 600 660 720 760
5 250 370 470 570 650 720 790 850 910
PRESSURE PRESSURE
psi 15 17 20 23 26 29 32 35 38 41 44 46 49 52 55 58 61 62 psi 12 17 23 29 35 41
bar 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.3 bar 0.8 1.2 1.6 2.0 2.4 2.8
MAX. LOAD lb MAX. LOAD lb
25 FR 210 240 250 280 300 320 340 350 360 390 410 420 440 450 460 470 490 500 25 170 210 260 300 350 400
20 FR 230 260 290 310 330 350 370 400 410 430 450 460 490 500 520 530 540 550 22 180 230 280 320 360 420
5 FR 300 340 370 400 430 450 490 510 530 550 580 600 630 640 670 680 690 720 20 190 240 290 330 390 440
25 DrW 150 170 180 200 210 220 240 250 260 260 280 290 310 320 330 340 350 350 16 200 250 310 360 420 470
20 DrW 170 190 200 220 230 240 260 280 290 300 310 320 340 350 360 370 380 390 13 210 280 330 390 440 510
5 DrW 210 240 250 290 300 310 340 350 370 390 400 410 440 450 470 490 490 500 9 220 290 350 410 470 530
5 240 310 370 430 500 570
DIAMETER WIDTH MAX. AIR MAX. RC
SIZE PR/LI
TREAD MAIN RANGE
RIM SIZE
PERMITTED
inches inches PRESSURE LOAD
SPEED
inches 0 310 400 490 550 640 730
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
13x5.00-6 2 T537S TL Green Area 3.50-6 12.6 4.4 1.4 290 20 37.4 TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
PRESSURE +/-1.5% +/-2% bar lb +/-2.5%
psi 12 17 20 35 new 13x5.00-6 6 T539 TL Industrial 3.50A-6 12.6 4.8 4.1 550 20 38.9
PRESSURE PRESSURE
psi 12 23 29 35 41 46 52 59 psi 7 12 15 17 20 23 26 29 32 35 38 41 44 46 49 52 55
bar 0.8 1.6 2.0 2.4 2.8 3.2 3.6 4.1 bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8
MAX. LOAD lb MAX. LOAD lb
25 150 250 300 340 390 430 450 500 25 200 260 310 340 360 400 430 450 490 510 540 550 570 610 630 650 660
22 170 260 310 350 410 460 470 530 20 220 300 340 370 410 440 470 510 540 560 600 620 640 670 690 720 740
20 180 290 330 370 430 490 510 550 5 290 390 440 490 530 570 610 650 690 730 770 790 830 870 890 930 950
16 190 300 350 400 450 500 540 600
13 200 320 370 430 490 520 570 630
9 210 340 400 450 520 550 610 670
5 230 360 420 490 550 600 650 720
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX.
SPEED
RC
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
0 290 460 540 620 710 750 830 910 PATTERN OF USE RIMS +/-1.5% +/-2% bar lb
mph
+/-2.5%
15x6.00-6 4 T539 Grip TL Green Area/Farming 4.50A-6 14.6 6.3 2.1 500 20 43.3
PRESSURE
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
SPEED psi 7 12 15 17 20 23 26 29
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0
15x6.00-6 4 T510 TL Green Area/Farming 4.50A-6 14.5 6.3 2.1 570 20 43.0
MAX. LOAD lb
PRESSURE 25 FR 200 250 300 330 360 390 420 450
psi 7 12 15 17 20 23 26 30 20 FR 220 290 330 360 410 430 460 500
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.1 5 FR 290 370 430 470 530 550 600 640
MAX. LOAD lb 25 DrW 140 180 210 230 250 280 300 320
25 220 290 330 360 410 440 460 510 20 DrW 150 200 230 250 290 310 330 350
20 240 320 360 410 450 490 520 570 5 DrW 200 250 300 330 370 400 430 450
5 310 410 470 530 580 630 670 730
PRESSURE PRESSURE
psi 7 12 14 17 20 23 26 28 31 33 psi 15 22 29 36 44 51 58 65 73 80 87 94 102 109 116 123 131 138
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 bar 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5
MAX. LOAD lb MAX. LOAD lb
30 FR 120 150 190 210 230 250 260 290 30 390 500 580 660 730 800 870 940 990 10501100 1160 1200 1260 1300 13601400 1440
25 FR 140 180 200 230 250 280 300 320 25 410 520 620 690 770 850 930 990 1050 11101170 1220 1280 1330 1380 14301480 1530
5 FR 190 230 260 290 320 350 390 410 440 450 16 460 580 690 780 870 960 1040 1110 1180 12501310 1380 1430 1500 1550 16101660 1720
30 DrW 90 110 130 140 170 180 190 210 5 610 760 900 10101140 1250 1340 1440 1530 16201710 1800 1860 1950 2020 20902160 2240
25 DrW 100 120 140 170 180 200 210 230
5 DrW 130 170 190 210 230 250 280 300 310 320
TIRES 8"
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX.
SPEED
RC
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
140-6 6 T539 Farming 4.50A-6 12.9 5.4 4.3 570 20 38.3 TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX.
SPEED
RC
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
PRESSURE 3.00-8 2 T539 Grey Industrial 2.50A-8 2.10-8 14.1 3.4 2.4 310 16 41.9
psi 12 15 22 29 36 44 46 49 52 55 58 62
PRESSURE
bar 0.8 1.0 1.5 2.0 2.5 3.0 3.2 3.4 3.6 3.8 4.0 4.3
psi 7 12 15 17 20 23 26 29 32 35
MAX. LOAD lb
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
25 FR 190 220 280 330 370 420 440 450 460 470 500 520
MAX. LOAD lb
20 FR 210 240 310 360 420 460 490 500 520 530 550 570
30 100 140 150 180 190 200 220 230 250 260
5 FR 280 310 400 470 540 600 630 640 670 680 720 740
25 110 150 170 190 200 220 230 240 260 280
25 DrW 140 150 200 230 260 290 310 320 330 340 350 350
16 120 170 190 210 220 240 260 280 300 310
20 DrW 150 180 220 250 300 320 340 350 360 370 390 400
5 150 220 240 280 290 320 340 360 390 400
5 DrW 200 230 290 330 390 410 440 450 470 490 500 510
PRESSURE PRESSIONE
PRESSURE
psi 7 12 15 17 20 23 26 29 32 35 38 41 psi 7 1211 14 17
17 20 21 23 23 26 28
38 31 3436 36
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 bar 0.5 0.80.8 1.0 1.2
1.2 1.4 1.5 1.61.6 1.8 2.0 2.2 2.42.5 2.5
MAX. LOAD lb kg/PNEUMATICO
MAX. LOAD lb
25 140 180 210 230 250 260 290 310 330 350 360 370 25
50 125 230165 190 210
260 230 240 300250 270 340
285 300 315
400 325
20 150 200 230 250 280 300 320 340 360 390 400 420 22
40 135 240175 200 225
280 245 255 320265 285 360
305 320 335
420 345
5 200 250 300 330 350 390 410 440 470 500 510 540 20
30 145 250190 215 240
290 265 275 330285 305 390
330 345 360
440 370
16
25 150 280200 225 255
310 280 290 350300 325 410
345 365 380
470 390
13
20 165 290210 240 270
330 295 310 390320 345 440
370 385 405
510 415
10
9 180 310230 265 295
350 325 335 410350 375 460
405 420 440
530 455
5 330 370 430 500 570
0 420 470 550 410 730
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX.
SPEED
RC
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
3.50-8 4 T514 in preparation
56J T501 HS High Speed 2.50A-8 2.1-8 15.4 3.8 4.3 490 60 45.9 DIAMETER WIDTH MAX. AIR MAX. RC
TREAD MAIN RANGE PERMITTED SPEED
4.00-8 4 T63 Farming 2.50A-8 3.00 16.8 4.2 2.8 500 20 50.3 SIZE PR/LI
PATTERN OF USE
RIM SIZE
RIMS
inches inches PRESSURE LOAD
mph
inches
+/-1.5% +/-2% bar lb +/-2.5%
4 T510 Farming 2.50A-8 3.00 16.7 4.5 2.8 500 20 48.7
4.00-8 71J T49 HS High Speed 2.50A-8 3.00-8 16.7 4.8 6.3 760 60 48.9
4 T991 Farming 2.50A-8 3.00 16.4 4.3 2.8 500 20 48.7
5.00-8 6 T991 Farming 3.00-8 18.5 5.4 3.6 850 20 54.5
4 T513 Farming 2.50A-8 3.00 16.8 4.2 2.8 500 20 50.0
6 T522 Farming 3.00-8 17.7 5.1 3.6 850 20 52.6
6 T991 Farming 2.50A-8 3.00 16.4 4.1 4.3 640 20 48.5
78J T523 HS High Speed 3.00-8 18.4 5.7 5.3 940 60 53.8
6 T522 Farming 2.50A-8 3.00 16.9 4.3 4.3 640 20 49.8
10 T991 Farming 3.00-8 18.0 5.6 6 1140 20 54.3
16x6.50-8 4 T539 Grip TL Green Area 5.375I-8 5.50A-8 16.0 6.5 1.9 620 20 47.5
6 T539 Farming 5.375I-8 5.50A-8 16.0 6.9 3 800 20 48.0
DIAMETER WIDTH MAX. AIR MAX. RC TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
TREAD MAIN RANGE PERMITTED SPEED SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5% +/-1.5% +/-2% bar lb +/-2.5%
190-8 8 T537 Industrial 5.50 6.00 16.7 6.9 5.9 1270 16 49.8 new 210/60-8 83A8 T415 TL Industrial 7.00 6.50-8 455 212 3.2 1070 25 1347
PRESSURE
psi 12 17 23 28 34 40 46
bar 0.8 1.2 1.6 2.0 2.4 2.8 3.2
MAX. LOAD lb
MAX. LOAD lb
30 FR 250 320 360 410 450 500 540 570 620 660
25 FR 280 350 410 450 510 550 600 640 690 740 TIRES 10"
5 FR 360 460 520 580 640 710 760 820 870 930 980 1050
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
30 DrW 180 220 250 290 320 350 390 410 440 470 SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
25 DrW 200 240 290 320 350 400 430 450 490 520
4.40-10 62J T690 HS High Speed 3.50-10 18.7 4.6 3.5 580 60 55.7
5 DrW 250 320 360 410 450 500 550 580 620 660 690 740
new 220/60-8 74A8/62A8 T463 TL Plus Farming 7.00I-8 8.00-8 18.7 8.7 2 830 25 54.8 PRESSURE
PRESSURE psi 12 15 19 23 29 33 37 43 47 51 57 61 66 71 74 80 86 91 97
psi 7 12 14 17 20 23 26 28 31 33 bar 0.8 1.0 1.3 1.6 2.0 2.3 2.6 3.0 3.3 3.6 4.0 4.3 4.6 5.0 5.2 5.6 6.0 6.4 6.8
bar 0.5 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 MAX. LOAD lb
MAX. LOAD lb 25 FR 450 510 600 660 760 830 880 960 1030 1070 1150 1190 1250 1300 1330
30 FR 320 410 460 530 580 650 690 750 20 FR 500 560 660 740 850 910 980 1070 1140 1190 1270 1320 1380 1440 1480
25 FR 350 450 520 580 650 720 770 830 5 FR 640 730 850 950 10901180 1270 1380 1470 1530 1630 1710 1770 1860 1910
5 FR 470 580 670 750 830 900 980 1060 1120 1160 25 DrW 310 350 420 460 540 570 630 670 720 750 790 840 860 910 940
30 DrW 230 290 330 370 420 450 500 530 20 DrW 340 400 460 520 600 640 690 750 790 840 880 930 960 1010 1040
25 DrW 250 320 360 420 460 510 550 580 5 DrW 440 510 600 670 770 830 890 970 1030 1080 1140 1190 1230 1310 1330
5 DrW 330 420 470 530 600 650 690 750 790 820 5C 540 630 730 820 940 1000 1090 1180 1260 1320 1390 1460 1510 1600 1630 1710 1770 1840 1910
PRESSURE
psi 11 17 23 28 34 40 46 51 57
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
SPEED bar 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
MAX. LOAD lb
20x8.00-10 6 T539 TL Farming 6.00I-10 19.9 8.0 3 1290 20 59.1
30 FR 440 570 710 820 950 1050 1150 1250 1370
PRESSURE 25 FR 500 640 780 900 1050 1170 1280 1390 1520
psi 12 15 17 20 23 26 29 32 35 38 41 42 44 46 49 52 55 20 FR 550 720 880 1010 1170 1310 1430 1550 1710
bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 2.9 3.0 3.2 3.4 3.6 3.8 5 FR 640 820 990 1160 1310 1490 1630 1760 1900
MAX. LOAD lb 30 DrW 320 410 500 570 660 750 820 890 970
25 FR 550 630 690 750 830 880 940 990 1050 1090 1150 1160 25 DrW 350 450 550 640 740 830 900 990 1070
20 FR 610 690 770 840 910 980 1040 1100 1160 1210 1270 1290 20 DrW 400 510 620 720 830 930 1010 1110 1200
5 FR 780 890 990 10801180 1270 1330 1420 1490 1570 1630 1660 5 DrW 460 580 710 820 930 1050 1160 1260 1360
25 DrW 390 440 490 540 570 620 650 690 730 760 790 820
20 DrW 430 490 540 600 640 680 730 770 800 850 880 900
5 DrW 550 630 690 770 830 880 940 990 1040 1090 1140 1170
5C 680 760 850 940 1000 1080 1150 1210 1270 1330 1390 1420 1460 15101570 1620 1660
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC DIAMETER WIDTH MAX. AIR MAX. RC
SPEED TREAD MAIN RANGE PERMITTED SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5% +/-1.5% +/-2% bar lb +/-2.5%
new 20X8.00-10 8 T570 TL Skid Steer in preparation 250/50-10 79A8/67A8 HIGH GRIP TL Green Area 8.50 19.8 9.9 1.2 960 25 59.6
20x10.00-10 6 T539 TL Farming 7.00 8.50 20.2 9.5 2.4 1430 20 60.4
21x8.00-10 4 T462 TL Farming 6.00I-10 21.3 8.1 3.3 1570 20 63.4
DIAMETER WIDTH MAX. AIR MAX. RC TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
TREAD MAIN RANGE PERMITTED SPEED SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5% +/-1.5% +/-2% bar lb +/-2.5%
4.00-12 4 T63 TL Farming 3.00Dx12 2.50Cx12-3.00Bx12 532 113 2.75 660 20 1615 23x8.50-12 6 T550 TL Skid Steer 7.00l-12 7JA-12 23.2 8.3 3.4 1810 5 69.0
PRESSURE PRESSURE
psi 12 15 17 20 23 26 29 32 35 38 40 44 46 49 52 psi 12 15 17 20 23 26 29 32 35 38 41 44 46 49
bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.75 3.0 3.2 3.4 3.6 bar 0.5 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4
MAX. LOAD lb MAX. LOAD lb
25 FR 290 330 360 400 440 460 500 530 550 570 600 30 490 550 620 680 740 780 840 880 930 970 1010 1060 1100 1140
20 FR 320 360 410 440 490 520 550 580 610 640 660 25 510 580 650 720 770 830 870 930 970 1010 1060 1100 1150 1190
5 FR 410 470 530 570 630 670 720 750 780 830 850 20 530 600 670 740 790 850 900 950 1000 1050 1090 1140 1180 1230
25 DrW 200 230 250 280 310 330 350 360 390 410 420 13 580 670 750 820 890 950 1000 1070 1120 1170 1220 1280 1320 1380
20 DrW 220 250 290 310 340 360 390 410 430 450 460 9 610 690 770 850 930 980 1050 1100 1170 1220 1270 1320 1380 1430
5 DrW 290 330 370 400 440 470 500 530 550 580 600 5 770 880 980 1080 1170 1250 1320 1400 1480 1540 1610 1680 1740 1810
5C 350 400 450 490 540 570 610 640 680 720 730 760 800 840 850 0 1220 1390 1550 1710 1840 1970 2090 2220 2340 2440 2550 2650 2760 2850
PRESSURE
psi 12 17 26 TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX.
SPEED
RC
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
bar 0.8 1.2 1.8 PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
MAX. LOAD lb 23x10.50-12 10 T463 TL Farming 7.00I-12 8.50I-12 22.6 10.7 3.6 2200 20 67.1
25 630 810 990 PRESSURE
22 670 860 1050 psi 15 17 20 23 26 29 32 35 38 41 44 46 49 52 55 58 61 64 68
20 710 900 1100 bar 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.7
16 750 970 1180 MAX. LOAD lb
13 800 1030 1260 25 FR 950 1050 1150 1230 1320 1410 1490 1570 1640 1720 1790 1850 1920 1980
9 850 1090 1330 20 FR 1050 1160 1270 1370 1470 1570 1650 1740 1820 1910 1980 2060 2130 2200
5 910 1170 1420 5 FR 1120 1490 1630 1760 1900 2020 2140 2250 2350 2460 2560 2660 2740 2840
0 1160 1490 1820 25 DrW 650 740 800 860 930 980 1050 1090 1150 1200 1250 1300 1340 1390
20 DrW 730 820 890 960 1030 1090 1160 1210 1280 1330 1390 1440 1490 1540
5 DrW 940 1050 1150 1230 1320 1410 1490 1570 1650 1720 1800 1860 1920 2000
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
SPEED 5C 1150 1290 1410 1510 1620 1720 1830 1910 2020 2110 2190 2280 2350 2440 2500 2590 2660 2730 2850
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
23x8.50-12 10 T463 TL Farming 7.00 7JA-12 22.4 8.4 4.0 2300 20 67.6
PRESSURE PRESSURE
psi 12 15 17 20 23 26 psi 12 15 17 20 23 26 29 32 35 38 39 42 45 48 51
bar 0.8 1.0 1.2 1.4 1.6 1.8 bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.7 2.9 3.1 3.3 3.5
MAX. LOAD lb MAX. LOAD lb
25 FR 780 890 1000 1090 25 FR 1120 1280 1420 1550 1680 1800 1920 2030 2140 2240 2280
20 FR 870 990 1110 1210 20 FR 1250 1420 1580 1730 1860 2000 2130 2250 2370 2480 2540
5 FR 1120 1280 1430 1570 5 FR 1610 1830 2030 2240 2400 2570 2740 2900 3050 3200 3270
25 DrW 550 630 690 760 25 DrW 780 890 990 1090 1180 1260 1340 1420 1490 1550 1600
20 DrW 620 690 770 850 20 DrW 870 990 1100 1210 1310 1400 1490 1580 1650 1730 1770
5 DrW 790 890 990 1090 5 DrW 1120 1280 1420 1570 1700 1810 1920 2030 2140 2240 2290
5C 970 1090 1210 1330 1440 1540 5C 1380 1570 1740 1910 2070 2200 2350 2490 2610 2730 2800 2920 3040 3140 3250
bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.7 2.9 3.1 3.3 3.5 psi 15 22 29 36 44 46 49 52 55 58 61 64 67 70 73 77 81 84
MAX. LOAD lb bar 1.0 1.5 2.0 2.5 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0 5.3 5.6 5.8
25 FR 1120 1280 1420 1550 1680 1800 1920 2030 2140 2240 2280 MAX. LOAD lb
20 FR 1250 1420 1580 1730 1860 2000 2130 2250 2370 2480 2540 30 FR 1470 19002340 2790 3170 3270 3430 3570 3770 3970
5 FR 1610 1830 2030 2240 2400 2570 2740 2900 3050 3200 3270 25 FR 1630 21102600 3100 3530 3640 3800 3970 4190 4410
25 DrW 780 890 990 1090 1180 1260 1340 1420 1490 1550 1600 5 FR 2090 26903280 3880 4500 4760 4880 5060 5210 54105640 5900 6170
20 DrW 870 990 1100 1210 1310 1400 1490 1580 1650 1730 1770 30 DrW 1040 13401690 2000 2230 2280 2380 2480 2620 2780
5 DrW 1120 1280 1420 1570 1700 1810 1920 2030 2140 2240 2290 25 DrW 1150 14901870 2220 2470 2540 2650 2760 2920 3090
5C 1380 1570 1740 1910 2070 2200 2350 2490 2610 2730 2800 2920 3040 3140 3250 5 DrW 1490 19002340 2790 3200 3350 3420 3540 3640 37603920 4110 4320
5C 1870 23502810 3320 3850 4030 4220 4400 4590 47504940 4990 5040 5190 5340 56105950 6170
PRESSURE
psi 12 15 17 20 23 26 29 32 33 38 41 42
bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.3 2.6 2.8 2.9
MAX. LOAD lb
30 FR 610 710 790 880 970 1040 1110
25 FR 670 780 880 980 1070 1160 1230
5 FR 880 1000 1120 1250 1370 1480 1590 1690 1730
30 DrW 430 500 550 620 680 740 790
25 DrW 490 550 620 680 760 830 880
5 DrW 630 710 790 870 960 1050 1120 1200 1230
5C 790 880 980 1070 1170 1270 1370 1470 1510 1640 1730 1760
PRESSURE
psi 7 12 15 17 22 25 28
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches bar 0.5 0.8 1.0 1.2 1.5 1.7 1.9
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
200/60-14.5 10 T448 Extra Farming 6.75 8.00 24.4 8.1 5 2350 20 72.5 MAX. LOAD lb
10 T536 Farming 6.75 8.00 24.7 8.0 5 2350 20 73.4 30 1440 1900 2170 2400 2740 2950 3150
25 1530 2010 2290 2550 2900 3130 3340
16 1720 2260 2580 2870 3260 3520 3750
5 2240 2940 3350 3730 4240 4570 4870
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC
SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph
+/-1.5% +/-2% bar lb +/-2.5%
200/60-14.5 10 T522 Farming 6.75 8.00 24.6 9.0 5 2090 20 73.5
PRESSURE
psi 12 17 23 29 34 40 43 49 51 54 57 63 66 69 71 80 84 89 93
bar 0.8 1.2 1.6 2.0 2.4 2.8 3.0 3.4 3.6 3.8 4.0 4.4 4.6 4.8 5.0 5.6 5.9 6.2 6.5
MAX. LOAD lb
25 FR 650 820 970 1100 12301340140015101550161016501740180018401880
20 FR 720 900 10801220 13701490155016801730179018401940200020502090
5 FR 930 117013901580 17601920201021602240230023702500257026502700
25 DrW 450 570 670 770 860 950 980 10501090112011601220126012901320
20 DrW 510 640 750 860 960 1050109011701210125012901360140014301480
5 DrW 650 830 970 1110 12301360141015101570161016601750181018501900
5C 800 100011801360 151016501720184019101960204021402200226023102470256026202690
TREAD MAIN RANGE PERMITTED DIAMETER WIDTH MAX. AIR MAX. RC Max load and pressure in the table above are for freerolling service LLV at speed 5, 13, 16, 20 and 25 mph.
SPEED
SIZE PR/LI RIM SIZE inches inches PRESSURE LOAD inches
PATTERN OF USE RIMS mph TL = Tubeless.
+/-1.5% +/-2% bar lb +/-2.5%
320/55-15 133A8/121A8 T421 TL Industrial 10LB-15 9.00-15 28.9 12.4 4 4540 25 86.6 LI = Load index. Numerical code associated with the maximum load a tire can carry at the speed indicated by its Speed Index (SI)
LLV = Low Load Variation, e.g. implements (ploughs, cultivator, etc.) and trailes with minor variations in load.
PRESSURE For LLV in Driving service decrease the load with 30%.
psi 11 14 17 20 23 26 28 31 34 37 40 43 46 48 51 54 57 60 64 67 HLV = High Load Variation e.g. trailers with significant variations in load.
bar 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 4.6 For HLV the maximum load can be increased by 20% if the inflation pressure increases with 30%.
MAX. LOAD lb RC = Rolling circumference = Calculated values.
30 FR 1290 1490 1690 1860 2040 2190 2340 2560 2780 2930 3080 3230 3370 3530 3670 3880 4090
25 FR 1430 1650 1870 2070 2270 2440 2600 2840 3090 3250 3420 3580 3750 3910 4080 4310 4540
5 FR 1850 2120 2380 2650 2890 3130 3350 3550 3790 4090 4380 4560 4760 4960 5170 5370 5570 5810 6060 6360
30 DrW 910 1060 1190 1320 1440 1570 1690 1830 1980 2070 2160 2250 2340 2450 2550 2710 2880
25 DrW 1010 1170 1320 1470 1610 1740 1870 2040 2200 2300 2400 2500 2600 2720 2830 3010 3200
5 DrW 1320 1500 1690 1870 2040 2220 2380 2550 2720 2930 3120 3240 3350 3460 3600 3730 3870 4050 4240 4480
7.00-8 8 inches l l
7.00Ix8 8 inches l l
The Trelleborg range of wheels and rims, is available from 3” to 16” in size and can be supplied in 7.75Ix8 8 inches l l
many different configurations depending on application, requirements for load capacity and 8.50x8 8 inches l l
8.50Ix8 8 inches l l
several other values influencing the design. The wheels and rims are designed with different 4.00x9 9 inches l l
specifications – ie. sizes, integral hubs, bearings, bores, offsets, plate thickness, paint finish etc. 4.00-9 9 inches l l
that match the performance requirements defined. 4.00Ex9 9 inches l l
4.00E-9 9 inches l l
6.00E-9 9 inches l l
Rims and wheels available 3.00Bx10x3.0 10 inches l l
The table contains the product range available in term of dimensions, widths and configurations. 3.50Bx10x3.0 10 inches l l
The columns welded/divided indicate whether the specific size of rim/wheel is available as welded 3.50x10 10 inches l l
3.50x10 10 inches l l
version and/or as assembled version. While the columns hub/bore indicate if the size 3.50F-10 10 inches l l
(dimension/width) is available as wheel (hub) and/or rim (bore). 5.00F-10 10 inches l l
5.50-10 10 inches l l
Rim/Wheel width Dimension Welded Divided Hub Bore 5.50F-10 10 inches l l
6.00x10 10 inches l l
1.50-3 3 inches l l 6.00Ix10 10 inches l l
2.10x4 4 inches l l 6.00-10 10 inches l l
2.10-4 4 inches l l 7.00x10 10 inches l l
2.50-4 4 inches l l 7.00Ix10 10 inches l l
2.85x4 4 inches l l 8.25Ix10 10 inches l l
6.35-4 4 inches l l 8.50x10 10 inches l l
3.00Ax5x1.5 5 inches l l 8.50Ix10 10 inches l l
2.50x6 6 inches l l 3.00x12 12 inches l l
2.50Ax6 6 inches l l 3.00Dx12 12 inches l l
3.25A-6Dx3.0 6 inches l 4.00x12 12 inches l l
3.50x6 6 inches l l 4.00x12 12 inches l l
3.50-6 6 inches l l 4.25x12 12 inches l l
3.50Ax6 6 inches l l 4.25x12 12 inches l l
4.00Ax6 6 inches l l l 5.00S-12 12 inches l l
4.50x6 6 inches l l 7.00x12 12 inches l l
4.50-6 6 inches l l 7.00x12 12 inches l l
4.50Ax6 6 inches l l 9.00x12 12 inches l l
4.50A-6 6 inches l l 8.50x12 12 inches l l
7.00Ax6 6 inches l l 10.50lx12 12 inches l l
1.40-8 8 inches l l 4.50x13 13 inches l l
2.125-8 8 inches l l 4.50x13 13 inches l l
2.125-8 8 inches l l 5.50Ex14 14 inches l l
2.50x8 8 inches l l 5.50Kx14 14 inches l l
2.50A/Cx8 8 inches l l 6.00Jx14 14 inches l l
2.50C-8 8 inches l l 6.75x14.5 14.5 inches l l
3.00x8 8 inches l l 6.75x14.5 14.5 inches l l
3.00-8 8 inches l l 3.00x15 15 inches l l
3.00Dx8 8 inches l l 3.00Ex15 15 inches l l
3.00D-8 8 inches l l 4.00Ex15 15 inches l l
3.75-8 8 inches l l 4.00Ex15 15 inches l l
3.75I-8 8 inches l l 4.50Ex15 15 inches l l
4.25I-8 8 inches l l 5.00Jx15 15 inches l l
4.33-8 8 inches l l 5.50x15 15 inches l l
4.33R-8 8 inches l l 6.00LBx15 15 inches l l
4.375Ax8x2.0 8 inches l l 7.00x15 15 inches l l
5.375/5.50x8 8 inches l l 10.00LBx15 15 inches l l
5.375I/5.50Ax8 8 inches l l 13.00LBx15 15 inches l l
5.50-8 8 inches l l 4.00Ex16 16 inches l l
5.50-8 8 inches l l 4.00Ex16 16 inches l l
6.20x8 8 inches l l 5.50Ex16 16 inches l l
6.25x8 8 inches l l 9.00x16 16 inches l l
236 237
Technical information about rims and wheels The difference between a rim and a wheel
Size Rim
The first figure specified for a rim or wheel indicates its width in inches. The last figure A rim consists of two drop-centred disc or two flat-based disc
indicates its diameter in inches. The letter after the first figure indicates the contour of the rim with a bore, welded or assembled.
or wheel. The rim is fitted onto a hub and therefore it is vital that the
The symbol after the letter indicates whether it has been assembled or welded. diameter of the pitch circle of the stud holes is the same on
the rim as on the hub.
The standard stud holes are pressed with a conical stud seat
of 60°, 80° and 90° both for welded and assembled rims.
A wide range of bores are available so that rims can be
5.00Ax8 supplied with a bore to meet your specific demands.
Wheel
A wheel consists of two drop-centred disc welded together or
8 indicates the rim/wheel
5.00 indicates the rim/wheel diameter in inches two flat-based disc assembled, and an integral hub.
width in inches A wide range of integral hubs is available making it possible
x indicates that rim/wheel also to place the hub in an offset position.
is welded
4.33R-8 Offset
The offset is measured from the centre of the rim/wheel to the hub side of the inner plate.
The offset can be positive (+) or negative (-).
Two more conditions must be fulfilled before we are able to make an offset. It is necessary
R indicates rim/wheel - indicates that rim/wheel
contour is divided that the dimension and the disc contour are the same on both disc.
Therefore wheels can be designed specifically for the functions required by your construction.
ET+ ET-
238 239
The paint finish Hub types and axle
Trelleborg uses a fully automated phosphating and powder painting facility which gives the Trelleborg also produces a wide range of hubs and stub axles (up to a length of 600 inches).
products a perfect finish and allows the choice of more than fifty different RAL colours. The hubs are designed with a flange of different size and bores matching the rim specifications.
Furthermore, there is the possibility to choose your own colour outside this range when Furthermore the hubs can be designed with a number of different bearings, lubrication nipples,
ordering a large number of units. seals, caps, axles and other features.
Examples of hubs available
Integrated hub types
The integrated hubs are designed to match the axle specifications and the required load
capacities. The hubs can be designed with a number of different bearings, lubrication nipples, stub
axles, seals, caps, axles and other features or have a more plain design.
Bearing: none/with key-way Bearing: ball bearing The axles produced are designed to match the hub of the wheel and the construction on which
the axles are mounted.
Example of axles available
Trelleborg is available for information about design of wheels, rims, hubs and axles to match
the requirements of your construction.
240 241
Rims for agriculture, forestry and excavator tires Wheels for agricultural tires
SIZE BEAD RIM THICK. DISC THICK. HUMP/ REINF VALVE GUARD
ANGLE inches inches KNUR
All Trelleborg rims are produced with high quality, strong steel, specially designed for roll- 15.3”
9.00x15.3* 5° 0.2 0.4 na na V1
forming. High strength steel is used in different grades, for the discs, depending on the size 15.5”
and service required for the complete wheel. 8.00x15.5 15° 0.2 0.4 na na V1
13.00x15.5 15° 0.2 0.4 na na V1
13.00x15.5* 15° 0.2 0.4 na na V1
Rim 16”
The rim is roll-formed in one piece and calibrated into the exact circumference and width. 11.00x16* 5° 0.2 0.4 na na V1
17”
Trelleborg is able to roll-form rims for large diameters and wide widths in one piece. The rim 13.00x17* 5° 0.2 0.4 na na V1
thickness is between 4-8mm. All rims are rigorously controlled during the production process 16.00x17* 5° 0.2 0.4 na na V1
and all welding is 100% checked, to avoid air- leakage when using tube-less tires. 17.5”
11.75x17.5 15° 0.2 0.4 na na V1
22.5”
Disc 11.75x22.5 15° 0.2 0.5 Hump R1 V1
Discs are cut out of steel in the right size and then pressed into the correct shape, specified 13.00x22.5 15° 0.3 0.5 Hump na V1
13.00x22.5 15° 0.3 0.6 Hump na V1
by the drawings. The disc thickness can be between 9 and 18 millimeters, dependent on the 16.00x22.5 15° 0.2 0.5 Hump R1 V1.V3
required load and diameter. The hole-pattern is customer specific. All discs are fully welded 16.00x22.5 15° 0.2 0.6 Hump R1 V1.V3
into the rim at the correct offset for the specification. 16.00x22.5 15° 0.3 0.5 Hump na V1.V3
16.00x22.5 15° 0.3 0.6 Hump na V1.V3
20.00x22.5 15° 0.2 0.5 Hump R1 V1.V3
Offset 20.00x22.5 15° 0.2 0.6 Hump R1 V1.V3
20.00x22.5 15° 0.3 0.5 Hump na V1.V3
Offset is the necessary distance between the centre of the rim and the contact surface on the 20.00x22.5 15° 0.3 0.6 Hump na V1.V3
wheel-axle. If the surface is on the machine side of the centre it is called a negative offset. If 24.00x22.5 15° 0.2 0.5 Hump R1 V1.V3
the surface is on the valve side of the centre it is a positive offset. Note that the offset controls 24.00x22.5 15° 0.2 0.6 Hump R1 V1.V3
the track gauge. 24.00x22.5 15° 0.3 0.5 Hump na V1.V3
24.00x22.5 15° 0.3 0.6 Hump na V1.V3
24”
Reinforcements W10x24 5° 0.2 0.5 Knurling na V1
W12x24 5° 0.2 0.5 na na V1
Sometimes the expected service demands a stronger than standard-rim. Therefore Trelleborg DW13Lx24 5° 0.2 0.5 Knurling na V1
offers 3 main versions of reinforcements, to make the rim stronger: DW14Lx24 5° 0.2 0.5 Knurling na V1
R1 -> round bar reinforcement DW15Lx24 5° 0.2 0.5 na na V1
26”
R2 -> box reinforcement. Unique to Trelleborg and strongest in the market
DW20Ax26 5° 0.2 0.5 na V1
R3 -> flat bar reinforcement DW20Ax26 5° 0.2 0.6 na V1
DW20Ax26 5° 0.3 0.6 Knurling R1 V1.V3
Painting DW25Bx26 5° 0.3 0.6 Knurling R1 V1
Trelleborg Savsjo uses a fully automated powder painting facility which gives the products a *Max Speed 25 mph
perfect finish and allows the choice of individual colours for the market. Today Trelleborg offers
more than 50 colours. All colours are water-based and have no content of hazardous
ingredients. A Trelleborg rim is 100% recyclable.
242 243
SIZE BEAD RIM THICK. DISC THICK. HUMP/ REINF VALVE GUARD SIZE BEAD RIM THICK. DISC THICK. HUMP/ REINF VALVE GUARD
ANGLE inches inches KNUR ANGLE inches inches KNUR
26.5” 34”
13.00x26.5 15° 0.2 0.5 Hump R1. R2 V1.V3 DW15Lx34 5° 0.2 0.6 Knurling R1.R2 V1. V2.V3
13.00x26.5 15° 0.2 0.6 Hump R1.R2 V1.V3 DW16Lx34 5° 0.2 0.6 Knurling R1.R2 V1. V2. V3
16.00x26.5 15° 0.2 0.5 Hump R1.R2 V1.V3 DW18Lx34 5° 0.2 0.6 Knurling R1.R2 V1. V2.V3
16.00x26.5 15° 0.2 0.6 Hump R1.R2 V1.V3 DW20Ax34 5° 0.2 0.6 Knurling R1.R2 V1. V2. V3
20.00x26.5 15° 0.2 0.5 Hump R1.R2 V1.V3 DW23Ax34 5° 0.3 0.6 Knurling na V1. V2
20.00x26.5 15° 0.2 0.6 Hump R1.R2 V1.V3 DW24Ax34 5° 0.2 0.6 Knurling R1.R2 V1. V2. V3
20.00x26.5 15° 0.3 0.5 Hump na V1 38”
20.00x26.5 15° 0.3 0.6 Hump na V1 DW12Lx38 5° 0.3 0.6 Knurling na V1. V2
24.00x26.5 15° 0.2 0.5 Hump R1.R2 V1.V3 DW12Lx38 5° 0.3 0.7 Knurling na V1. V2
24.00x26.5 15° 0.2 0.6 Hump R1.R2 V1.V3 DW15Lx38 5° 0.3 0.6 Knurling R1 V1. V2
24.00x26.5 15° 0.3 0.5 Hump na V1.V3 DW15Lx38 5° 0.3 0.7 Knurling R1 V1. V2
24.00x26.5 15° 0.3 0.6 Hump na V1.V3 DW16Lx38 5° 0.3 0.6 Knurling R1 V1. V2
28.00x26.5 15° 0.2 0.5 Hump R1.R2 V1.V3 DW16Lx38 5° 0.3 0.7 Knurling R1 V1. V2
28.00x26.5 15° 0.2 0.6 Hump R1.R2 V1.V3 DW18Lx38 5° 0.3 0.6 Knurling R1 V1. V2
28” DW18Lx38 5° 0.3 0.7 Knurling R1 V1. V2
W10x28 5° 0.2 0.5 na na V1 DW20Ax38 5° 0.3 0.6 Knurling R1 V1. V2
W12x28 5° 0.2 0.5 na na V1. V3 DW20Ax38 5° 0.3 0.7 Knurling R1 V1. V2
DW14Lx28 5° 0.2 0.5 Knurling na V1 DW23Ax38 5° 0.3 0.6 Knurling R1 V1. V2
DW16Lx28 5° 0.2 0.5 Knurling na V1 DW23Ax38 5° 0.3 0.7 Knurling R1 V1. V2
DW18Lx28 5° 0.2 0.5 Knurling na V1 DW24Ax38 5° 0.3 0.6 Knurling R1 V1. V2
DW15Lx28 5° 0.2 0.5 na R1 V1. V3 DW24Ax38 5° 0.3 0.7 Knurling R1 V1. V2
30” DW25Ax38 5° 0.3 0.6 Knurling R1 V1. V2
DW14Lx30 5° 0.2 0.5 na R1 V1 DW25Ax38 5° 0.3 0.7 Knurling R1 V1. V2
DW14Lx30 5° 0.2 0.6 na R1 V1 DW27Ax38 5° 0.3 0.6 Knurling R1 V1. V2
DW16Lx30 5° 0.2 0.5 Knurling R1 V1. V3 DW27Ax38 5° 0.3 0.7 Knurling R1 V1. V2
DW16Lx30 5° 0.2 0.6 Knurling R1 V1. V3 DW28Ax38 5° 0.3 0.6 Knurling R1 V1. V2
DW18Lx30 5° 0.2 0.5 Knurling R1 V1 DW28Ax38 5° 0.3 0.7 Knurling R1 V1. V2
DW18Lx30 5° 0.2 0.6 Knurling R1 V1 42”
DW20Ax30 5° 0.2 0.5 Knurling R1 V1. V3 DW16Lx42 5° 0.3 0.6 Knurling na V1. V2
DW20Ax30 5° 0.2 0.6 Knurling R1 V1. V3 DW18Lx42 5° 0.3 0.6 Knurling na V1. V2
DW23Ax30 5° 0.3 0.5 Knurling R1 V1 DW20Ax42 5° 0.3 0.6 Knurling R1 V1. V2
DW23Ax30 5° 0.3 0.6 Knurling R1 V1 DW23Ax42 5° 0.3 0.6 Knurling R1 V1. V2
30.5” DW23Ax42 5° 0.3 0.7 Knurling R1 V1. V2
20.00x30.5 15° 0.2 0.5 Hump R1. R2 V1. V2.V3 DW25Bx42 5° 0.3 0.6 Knurling R1 V1. V2
20.00x30.5 15° 0.2 0.6 Hump R1. R2 V1. V2.V3 DW25Bx42 5° 0.3 0.7 Knurling R1 V1. V2
20.00x30.5 15° 0.3 0.5 Hump na V1. V2 DW28Ax42 5° 0.3 0.6 Knurling R1 V1. V2
20.00x30.5 15° 0.3 0.6 Hump na V1. V2 DW28Ax42 5° 0.3 0.7 Knurling R1 V1. V2
24.00x30.5 15° 0.2 0.5 Hump R1. R2 V1. V2.V3 46”
24.00x30.5 15° 0.2 0.6 Hump R1. R2 V1. V2.V3 DW16Lx46 5° 0.2 0.6 Knurling R1 V1.V2
24.00x30.5 15° 0.3 0.5 Hump na V1. V2 DW16Lx46 5° 0.2 0.6+0.7* Knurling R1 V1.V2
24.00x30.5 15° 0.3 0.6 Hump na V1. V2 DW18Lx46 5° 0.3 0.6 Knurling R1 V1.V2
28.00x30.5 15° 0.3 0.5 Hump R2 V1. V2 DW25Bx46 5° 0.3 0.6 Knurling R1 V1.V2
28.00x30.5 15° 0.3 0.6 Hump R2 V1. V2 DW25Bx46 5° 0.3 0.7 Knurling R1 V1.V2
32” New 42” - THK
DW20Ax32 5° 0.3 0.6 Knurling R2 V1. V2. V3 DW23Bx42 THK 5° 0.3 0.5 Knurling THK R1 V1
DW20Ax32 5° 0.3 0.7 Knurling R2 V1. V2. V3 DW23Bx42 THK 5° 0.3 0.7 Knurling THK R1 V1
DW23Ax32 5° 0.3 0.6 Knurling R2 V1. V2. V3 DW25Bx42 THK 5° 0.3 0.3 Knurling THK R1 V1
DW23Ax32 5° 0.3 0.7 Knurling R2 V1. V2. V3 DW25Bx42 THK 5° 0.3 0.7 Knurling THK R1 V1
DW27Ax32 5° 0.3 0.6 Knurling R2 V1. V2. V3 New 46” - THK
DW27Ax32 5° 0.3 0.7 Knurling R2 V1. V2. V3 DW23Bx46 THK** 5° 0.3 0.3 Knurling THK R1 V1
DW30Ax32 5° 0.3 0.6 Knurling R2 V1. V2. V3 DW23Bx46 THK** 5° 0.3 0.7 Knurling THK R1 V1
DW30Ax32 5° 0.3 0.7 Knurling R2 V1. V2. V3 DW25Bx46 THK** 5° 0.3 0.3 Knurling THK R1 V1
DW25Bx46 THK** 5° 0.3 0.7 Knurling THK R1 V1
Max Speed 40 mph na = not available Max Speed 40 mph na = not available
244 245
Wheels for forestry tires Wheels for excavator tires
SIZE BEAD RIM THICK. DISC THICK. HUMP/ REINF VALVE GUARD SIZE BEAD RIM THICK. DISC THICK. HUMP/ REINF VALVE GUARD
ANGLE inches inches KNUR ANGLE inches inches KNUR
22.5” 22.5”
16.00x22.5 15° 0.2 0.5 + 0.6 Hump R1 V3 20.00x22.5 15° 0.3 0.5 Hump R1 V1.V3
20.00x22.5 15° 0.2 0.5 Hump R1 V3 20.00x22.5 15° 0.3 0.6 Hump R1 V1.V3
20.00x22.5 15° 0.2 0.6 Hump R1 V3 24.00x22.5 15° 0.3 0.5 Hump R1 V1.V3
20.00X22.5 UHL 15° 0.2 0.5 Knurling R1 V3 24.00x22.5 15° 0.3 0.6 Hump R1 V1.V3
20.00X22.5 UHL 15° 0.2 0.6 Knurling R1 V3
24.00x22.5 15° 0.2 0.5 Hump R1 V3
24.00x22.5 15° 0.2 0.6 Hump R1 V3
24.00x22.5UHL 15° 0.2 0.5 Knurling R1 V3
24.00x22.5UHL 15° 0.2 0.6 Knurling R1 V3
24.5”
20.00x24.5 15° 0.2 0.5 Hump(TH2B) R1. R2. R3 V3
24.00x24.5 15° 0.2 0.5 Hump(TH2B) R1. R2. R3 V3
26”
DW20Ax26 5° 0.3 0.5 Knurling R1 V3
DW20Ax26 5° 0.3 0.6 Knurling R1 V3
26.5”
13.00x26.5 15° 0.2 0.5 Hump R1. R2 V3
13.00x26.5 15° 0.2 0.6 Hump R1 V3
16.00x26.5 15° 0.2 0.5 Hump R1.R2 V3
16.00x26.5 15° 0.2 0.6 Hump R1.R2 V3
20.00x26.5 15° 0.2 0.5 Hump(TH2B)Knurling R1.R2.R3 V3
20.00x26.5 15° 0.2 0.6 Hump(TH2B)Knurling R1.R2.R3 V3
20.00x26.5 15° 0.2 0.5 Hump(TH2B) R1.R2.R3 V3
20.0026.5 15° 0.2 0.6 Hump(TH2B) R1.R2.R3 V3
24.00x26.5 15° 0.2 0.5 Hump(TH2B) R1.R2.R3 V3
24.00x26.5 15° 0.2 0.6 Hump(TH2B) R1.R2.R3 V3
24.00x26.5 15° 0.2 0.5 Hump(TH2B)Knurling R1.R2.R3 V3
24.00x26.5 15° 0.2 0.6 Hump(TH2B)Knurling R1.R2.R3 V3
26.00X26.5 15° 0.2 0.5 Hump R1.R2 V3
26.00X26.5 15° 0.2 0.6 Hump R1.R2 V3
28.00x26.5 15° 0.2 0.5 Hump(TH2B) R1.R2 V3
28.00x26.5 15° 0.2 0.6 Hump(TH2B) R1.R2 V3
30.5”
20.00x30.5 15° 0.2 0.5 Hump(TH2B) R1.R2.R3 V3
20.00x30.5 15° 0.2 0.6 Hump(TH2B) R1.R2.R3 V3
24.00x30.5 15° 0.2 0.5 Hump(TH2B) R1.R2.R3 V3
24.00x30.5 15° 0.2 0.6 Hump(TH2B) R1.R2.R3 V3
34”
DW20Ax34 5° 0.2 0.6 Knurling R1.R2.R3 V3
DW24Ax34 5° 0.2 0.6 Knurling R1.R2.R3 V3
DW16Lx34 5° 0.2 0.6 Knurling R1.R2 V3
Max Speed 40 mph na = not available Max Speed 40 mph na = not available
246 247
Glossary and information
8.00x15.5 = Rim 8” wide and 15.5” in diameter Reinforcement
W12x24 = Rim without drop centre Big machines in heavy duty applications frequently face great
DW20Ax34 = Rim with drop centre and a high rim flange (A). stress. To handle this you reinforce the flange.
The disc is welded into the drop centre. The reinforcements also protect against direct impacts on the
DW18Lx38 = Rim with drop centre and a low rim flange (L). edge of the wheel. Rim (R0)
The disc is welded into the drop centre. R0 means that this rim has
no reinforcement.
Valve protection
Valve guard is used when there is a risk that the valve will be damaged. 19 inches reinforcement Box reinforcement (R2) Flat bar reinforcement (R3)
(R1) Protects against impact. In Protects the edge from impact
This protects the rim edge addition, the inside of the rim and damage, this
against impact and damage, has a design that prevents dirt reinforcement can be used in
and makes it possible for the and mud from collecting and several tough conditions.
rim to carry a larger load. sticking. This reinforcement
Valve guard, type V1. Normal area of application is on wheels produces an extremely strong
intended for use in agriculture.V1 valve guard fits rims up to rim - suitable for the toughest
26.5". jobs.
Knurling
The grooved section of the rim where the tire bead rests on a 5° and 15° rim. The purpose
Valve guard, type V2. Fits wheels of 30" in diameter and of knurling is to counteract the tendency for the tire to slip on the rim.
upwards. Its normal area of application is on rims inteded for
use in agriculture. This type of valve guard is necessary if a
Sävsjö dual-mounting is being used.
Hump
Valve guard, type V3. To be used when there is a greater An extra bend just inside the bead seat. The hump facilitates driving at low air pressure,
possibility of impact. This style of valveguard fits all forestry and holding the tire in place.
agricultural wheels. Its normal area of application is on forestry
and construction equipment.
248 249
Twinning DUO500
Dual mounting system. Dual mounting system.
NEW
Advantages Advantages
• One supplier for the complete package: • No modifications needed to the tractor • One supplier for the complete package: • Easy to mount and demount
tire – wheel – dual • Tension and stress will not increase on tire – wheel – dual • Attached rim and drum for easy handling
• The twinning is an estension of the axle the original wheel • Easy maintenance, easy service • Customized distance between wheels
• Easy maintenance, easy service • New innovative solutions to give easy • No modifications needed for the tractor
• Self-cleaning system mounting
• All wheels used are complete with disc
Colours
The rims are powder coated own facility and are available in different colours. Rims can also
be supplied without powder-coated. If you have any question please contact the Trelleborg
expert in your area.
250 251
Tire marking Technical information
A series of numbers and codes internationally used exist for the identification of tire
structures, dimensions and main applications. This group of codes and numbers is collectively
known as the "markings" and permits precise identification of the tire.
Here below some examples:
1 TRELLEBORG Brand name and / or manufactures name d 161A8 HT 161 A2 Service description (forestry)
2 TM800 or TWIN 421 Product name (tread pattern identification) LT 168 A2 Load index and speed symbols as 4.a
3 SIZE DESCRIPTION Metric tire size designation 161 A8 = service on road
a 600/65R38 600 = section width (inches) HT 161 A2 = High Torque service (skidders)
600/60-30.5 65 = aspect ratio between section height and section width (%) LT 168 A2 = Low Torque service (forwarders, harvesters)
520/70B30 R = radial construction e 99J Service description (high speed trailer)
38 = rim diameter (inch) Load index and speed symbols as 4.a
- = cross ply construction 5 IMP or other Service type identification
B = bias belted construction IMP = Implement
b 650/60-26.5 LS2 Metric tire size designation for forestry tires
Other service identifications are:
LS = log service
2 = tread depth code FORESTRY = tires for forestry machines
c 7.50-16 Coded tire size designation AGROFOREST = tires for mixed agri and forestry service
7.50 = section width (inch) AMPT = Agricultural Multi Purpose Tire : tires for a high rate
- = cross ply construction of road service up to 40 mph
16 = rim diameter (inch) LOADER = tires for wheel loaders and back hoe loaders
d 20.5x10.0-10 American tire size designation
GARDEN TRACTOR = tires for gentle service on green surfaces
20.5 = overall diameter (inch)
x = versus INDUSTRIAL = tires for industrial service
10.0 = section width (inch) FRT = Free Rolling Tire: coinchesercial vehicle tire used as
- = cross-ply construction high speed implement trailer tire
10 = rim diameter (inch) 6 STEEL BELT The tire has a belt of steel cord (forestry tires)
4 a 157 A8 Service description 7 TUBELESS Tire to be used without a tube (some tubeless tires are marked
157 = load index for the tires nominal load capacity that they are allowed to be used with a tube)
154 B A8 = speed symbol for the tires nominal speed
8 Arrow indicating rotating direction of a traction tire in driving service
154 = additional load index at max speed
B = additional speed symbol for max speed 9 Pictogram showing the max seating pressure
b 8 PR Tire carcass strength identification (varies for different type of tires)
8 = strength index
PR = ply rating (but does not necessarily represent the
number of cord plies in the tire)
4 c 166 A8 Service description (implement)
10 SAFETY WARNING Warning text which states the items to be paid attention
Load index and speed symbols as 4.a
154 A8 to when fitting the tire
free rolling tire
11 E ECE type approval mark and number (often called "e-marking")
driving tire 16
106R-00 0001
252 253
3. d
Remark: Other numbers (small figures) can be found on the tire sidewall. For any question
4. e
please contact the Trelleborg expert in your area.
11
10
3. b
4. d
2
5
1
10
254 255
Technical data symbols Technical information
Rim
The following symbols are used in the technical data charts States recoinchesended rim size. Rim width is expressed in inches e.g. 16.00. A letter symbol
in connection with rim width represents the code for the rim contour. The rim diameter is
Dimensions expressed in inches. Rim diameters ending with 0.5 (17.5, 22.5 etc.) are 15-degree rims.
Size Remaining rims are 5-degree (34, 38, 42 etc.).
States tire size designation. In the table only the rim width is stated.
Please check the list of rims included.
LI - SS
States tire Load Index and Speed Symbol.
LI is a code for the tire load capacity at its nominal
maximum speed.
SS is a code indicating the tire nominal maximum speed.
Tube
PR
States tire ply rating and is a strength code for the tire States the tube to be used for each size.
carcass. Example of tube marking:
Type or Tread pattern
States the tire tread symbol or pattern. If it is a tubeless STT brand Size designation valve
tire, the tire is marked with the symbol TL after the tread
symbol. 7.50 – 16 (*) TR15
520/70-30 / 18.4-30 (**) TR218
New tire
States tire diameter and width in inches, when the tire is TWIN brand Size designation valve
originally mounted with a nominal inflation pressure. 600/55-30.5 / 600/60-30.5 (**) TR218
SW
The Section Width of the unloaded tire. If the tire is fitted (*) The tube is marked in the same way as the corresponding type.
on a rim which is narrower (or wider) than that underlined, the section width is obtained by No marking on the tube concerning valve type.
decreasing (or increasing) the value shown by 40% of the rim width variation (in millimetres).
(**) Double size marking means that the tube fits the corresponding tire sizes.
OD No marking on the tube concerning valve type.
The Overall Diameter of the unloaded tire.
RC
Rolling Circumference at reference load and pressure. Distance covered in one complete revolution
of the wheel on an asphalt road. Value in inches measured according to ISO11795. Speed
SLR The speed indicated in the table represents the maximum speed in use for the tire at the given
Static Loaded Radius is the radius from the wheel centre down to the ground, at reference load load and pressure. Speed notation in bold types states the nominal speed for the tire.
and pressure. The difference between unloaded radius and static loaded radius is called
deflection. This value varies between 15-30% of the tire section height, depending on tire type. Speed 1 Km/h = 0.62 mph
SRI
The Speed Radius Index states a theoretical value only to be used for calculation of the max speed
of a vehicle according to EU homologation procedures.
Tire in service
States the tire max. diameter and width in inches that the tire may reach during its lifetime. These
are the measurements manufacturers should pay attention to when designing new vehicles and
machinery, to obtain adequate clearance for the wheel.
256 257
Free rolling and driving wheel
These are new symbols used for Implement tires and Tire size correspondence Technical information
states freerolling and driving service .
Loadwise, the load capacity is 30% less for driving wheels ETRTO - SRI
Standard Standard series Wide series Extra large series Narrow TWIN TRACTOR
than for free rolling wheels. series /80-/85 /70-/75 /60-/65-/85 series/90-/95 /45-/50 /55 /60-/55
360 6.50-16 260/70R16
Inflation pressure 360
390
9.0/75-16
7.50-16 250/80-16
260/70R16
280/70R16
The inflation pressures refer to tires at ambient temperature. The values given in the tables 410 7.50-18 250/80-18 280/70R18
represent the "reference pressure" for the load and speed conditions shown. The actual 425 7.50R20 400/55-17.5
pressure of the tire must be established in accordance with the mechanical characteristics of 450 9.5R20 260/80R20 300/70R20
475 11.2R20 280/85R20 320/70R20
the vehicle, the additional load from the use of equipment and additional storage facilities,
500 12.4R20 320/85R20 360/70R20 360/60-24
as well as the load conditions. 525 11.2R24 280/85R24 320/70R24
These values can be obtained from the "load / pressure / application" tables according to 550 12.4R24 320/85R24 360/70R24 420/65R24 600/50-22.5 400/60-26.5
575 13.6R24 340/85R24 380/70R24 440/65R24
the use: 600 14.9R24 380/85R24 420/70R24 480/65R24 230/95R32 500/60-26.5
Tractor tires 625 16.9R24 420/85R24 480/70R24 540/65R24 270/95R32 710/45-26.5 600/55-26.5
650 16.9R26 480/70R26
- on road at various speeds
575 11.2R28 280/85R28 320/70R28
- on field at "high torque" (ploughing, harrowing, etc.) 600 12.4R28 320/85R28 360/70R28 230/95R32 500/60-26.5
- on field at "low torque"(surface works, sowing, etc.) 625 13.6R28 340/85R28 380/70R28 440/65R28 270/95R32 600/55-26.5
- cyclic loading service on harvesting machines 650 14.9R28 380/85R28 420/70R28 480/65R28 230/95R36
675 16.9R28 420/85R28 480/70R28 540/65R28 600/55-30.5
Implement tires 675 14.9R30 380/85R30 420/70R30 600/55-30.5
- freerolling wheel - road service 700 16.9R30 420/85R30 480/70R30 540/65R30 750/45-30.5 600/60-30.5
- freerolling wheel - field service 600/65R28
- driving wheel - road service 725 18.4R30 460/85R30 520/70R30 210/95R44 750/50-30.5
- driving wheel - field service 600/70R28
725 14.9R34 380/85R34
Forestry tires 750 16.9R34 420/85R34 480/70R34 540/65R34 230/95R44
- on road 600/70R30 710/60R30
- on light terrain 775 18.4R34 460/85R34 520/70R34 600/65R34 800/50-34 800/55-30.5
650/60R34 710/55-34
- on heavy terrain and road service 825 20.8-34 710/60R34
- on very heavy terrain 725 13.6R36 340/85R36 210/95R44
Green area and garden tires 725 12.4R38 320/85R38
750 13.6R38 340/85R38
- on road 775 14.9R38 380/85R38 270/95R44
- on field 800 16.9R38 420/85R38 480/70R38 540/65R38 230/95R48 600/60-38
600/70R34
AMPT tires or loaders and excavator tires
825 18.4R38 460/85R38 520/70R38 600/65R38 270/95R48 650/60-38
- road service 710/60R34 300/95R46
- field service 875 20.8R38 520/85R38 580/70R38 650/65R38 850/50-38 710/65-38
600/65R42 900/60-32
For tires with A8 or D marking, in frequent or long distance road transport at speeds of more
875 18.4R42 480/80R42 600/65R42
than 30 Km/h, the inflation pressure should be increased by 0.4 bar over the nominal value 925 20.8R42 520/85R42 580/70R42 650/65R42 850/55-42 750/65-38
obtained for effective loads on the axles. 620/70R42 850/60-38
650/75R38
Inflation pressure 1 bar = 100 kPa 710/70R38
1 bar = 14.5 psi 925 18.4R46 480/80R46
975 20.8R46 520/85R46 710/70R42 900/60R38 380/90R50
Load capacity 480/80R50 800/70R38 650/85R38
1025 710/75R42 900/60R42 380/90R54
The load capacity is the maximum load (expressed in lb) a tire is permitted to carry under
specified operating conditions. The nominal load is stated in bold type. Modifying the original fitment of the machine may require a new set of rims. Verify that the alternative tire size is fitted on an approved rim contour.
258 259
Load table Technical information Conversion factors Technical information
Conversion of load indices (LI) into load capacities per tire (lb) METRIC UNIT IMPERIAL UNIT
1 millimeter (inches) = 0.03937 inches 1 inch (") = 25.4 millimeters
1 meter (m) = 1.09361 yards 1 yard = 0.9144 meters
LI lb LI lb LI lb LI lb 1 kilometer (Km) = 0.62137 miles 1 mile (mi) = 1.609344 kilometers
1 liter (l) = 0.21997 gallons (UK) 1 gallon (UK) = 4.5461 litres
1 liter (l) = 0.26417 gallons (USA) 1 gallon (USA) = 3.7854 litres
50 420 85 1130 120 3070 155 8490 1 gram (g) = 0.035274 ounces 1 ounce (oz) = 28.34952 grams
51 430 86 1160 121 3180 156 8770 1 kilogram (Kg) = 2.205 pounds 1 pound (lb) = 0.45359 kilograms
52 440 87 1190 122 3290 157 9040 1 kilometer per hour (Km/h) = 0.62137 miles per hour 1 mile per hour (mph) = 1.609344 kilometers per hour
1 kilopascal (kPa) = 0.145 pounds per square inch 1 pound per square inch (psi) = 6.895 kilopascal
53 450 88 1230 123 3400 158 9310
1 bar = 100 kilopascal 1 pound per square inch (psi) = 0.06895 bar
54 460 89 1270 124 3510 159 9590 1 kilowatt (kW) = 1.34 horsepower 1 horsepower (HP) = 0.746 kilowatts
55 480 90 1310 125 3620 160 9860 1 Newton meter (N.m) = 0.113 inch pound 1 inch pound (in-lb) = 8.85 inch-pound
56 490 91 1350 126 3730 161 10140
57 500 92 1380 127 3840 162 10410
58 520 93 1420 128 3940 163 10680
59 530 94 1470 129 4050 164 10960 Temperatures
60 550 95 1510 130 4160 165 11290
(Fahrenheit - 32) x 0.55 = Celsius 32 40 50 60 70 75 85 95 105 140 175 212 °F
61 560 96 1560 131 4270 166 11620 (Celsius x 1.8) + 32 = Fahrenheit 0 5 10 15 2 25 30 35 40 60 80 100 °C
62 580 97 1600 132 4380 167 11940
63 600 98 1640 133 4510 168 12270
64 610 99 1700 134 4650 169 12710
65 640 100 1750 135 4780 170 13150
66 660 101 1810 136 4910 171 13480 Speed
67 670 102 1860 137 5040 172 13810
Speed code A1 A2 A3 A4 A6 A8 B C D E F J
68 690 103 1920 138 5170 173 14250
Km/h 5 10 15 20 30 40 50 60 65 70 80 100
69 710 104 1970 139 5330 174 14680 mph 3 6 9 12 19 25 31 37 40 43 50 62
70 730 105 2030 140 5480 175 15120
Km/h to mph x 1.61 mph to Km/h x 0.62
71 760 106 2080 141 5640 176 15560
72 780 107 2140 142 5810 177 16000
73 800 108 2190 143 5970 178 16440
74 820 109 2260 144 6140 179 16980 Pressures
75 850 110 2320 145 6360 180 17530
kPa (kilopascal) 60 100 120 140 160 180 200 240 280 320 360 400 500
76 880 111 2390 146 6570 181 18080
bar = Kg/cm2 0.6 1.0 1.2 1.4 1.6 1.8 2.0 2.4 2.8 3.2 3.6 4.0 5.0
77 900 112 2450 147 6740 182 18630 psi = (pound/square inches) 8 15 17 29 23 26 28 34 40 45 51 57 71
78 930 113 2520 148 6900 183 19180
psi to bar x 0.07 bar to psi x 14.23 kPa to bar x 100 bar to kPa x 0.01 kPa to psi x 7 psi to kPa x 0.142
79 960 114 2590 149 7120 184 19720
80 990 115 2660 150 7340 185 20270
81 1010 116 2740 151 7560 186 20820
82 1040 117 2820 152 7780 187 21370
83 1070 118 2890 153 8000 188 21920
84 1100 119 2980 154 8220 189 22570
260 261
W and DW rims Technical information
Dimensions (inches)
Rims Diameters
G H P Nominal rim - diameter Mandrel circumference - inches. (1) Diameter D - inches.
A ±1 min min 16" 50 16
W6 152.5 18" 57 18.2
W7 178 20" 63.3 20.2
0.89 0.93 24" 75.8 24.2
W8
203 26" 82.1 26.2
W8L
W9 228.5 28" 88.4 28.2
± 2.5 1 30" 94.7 30.2
W10
254 32" 101 32.2
W10L 22.5
W11 279.5 1.06 34" 107.2 34.2
W12 305 36" 113.5 36.2
W13 330 20.5 38" 119.8 14.6
40" 126.2 40.2
W14L 355.5
42" 132.4 42.2
W15L 381
±5 44" 138.7 44.2
W16L 406.5 1.3
48" 151.2 48.2
W18L 457.2
50" 157.6 50.2
DW10 254 1
52" 163.9 50.2
DW11 279.5 1.06
± 2.5 54" 170.1 54.2
DW12 305
DW13 330
(1) Mandrel circumference ( D1±1.2 inches) for ropes containing 16 inches. balls
DW13L 330 1.4
DW14L 355.5
DW15L 381
±5
DW16L 406.5
DW18L 457 16
LL
DW20B 508 BA
DW21B 533.5 27
DW23B 584 50.5
DW25B 635 ± 6.5 1.14
DW27B 686 SPECIFIED
OF DIAMETER
15°
DW28B 711
DW30B 762
L = Reduced flange's height
D1
D
DW-A rims have been replaced by DW-B and they can be used with full interchargeability
P min
_.. 3.2
Pitch knurling 1.6
A
P
G 5°+1°
- K min
H D 1.6
min 0.2 min 9.5+- 0.8
0.8 max
DW rim contour
262 263
Drop centre rims Technical information AG 15° drop centre rims Technical information
12.7
14" 14 Profile of the rim
15°
15" 15
45°
min
11
rim
15.3"* 15.3 R1
30min
6 6
16" 16 ° R1
15
17" 17.2
18" 18.2
19" 19.2
20" 20.2
24" 24.2
* Rim 9.00 only A
G
5°+1°
-
D
H
for rims > 9.00
264 265
Diameters
Nominal Diameter
15.5
Mandrel Circumference inches (1)
48.3
Diameter D inches
15.5
Wheels Technical information
17.5 54.6 17.5
19.5 60.9 19.5
20.5 64 20.5 Trelleborg manufactures its own wheels and has a wide range of high quality rims.
22.5 70.3 22.5 A wheel consists of rim and disc with varying details like rim flange reinforcement and air valve
24.5 76.6 24.5 guards depending on wheel application.
26.5 82.9 26.5
30.5 95.4 30.5
(1) Mandrel circumference (D1 +- 0.05 inches) for ropes containing 0.6 inches balls
The rim for a TWIN wheel is a one piece design and rolled with a profile to allow mounting of
the tire in the best possible way.
3
1 = Rim 4 5 1
2 = Disc with hubhole+bolthole
3 = Rim flange 7
16 6
BA
LL
R
4 = Reinforcement
12
.7 5 = Airvalve hole
2
6 = Airvalve guard (pipesleeve)
7 = Pipesleeve plug
15°
SPECIFIED
D1
OF DIAMETER
Rim types
There are two existing main types of rim related to tire bead seat angle.
5° - seat angle combined with high rim flange.
15° - seat angle combined with low rim flange.
Countour dimension
Width code E (inches) 5°
E
15
max
15° - rims with diameter ending with 0.5” (17.5”, 22.5”, 30.5” ....).
5° - rims with remaining diameters (24”, 34”, 38”.....).
11° min
D
15°
266 267
Hump rim Hole pattern/Marking-Disc
Hump is a raised profile on the tire bead seat, which holds the tire firmely in place on its bead To make it possible to fit a wheel on a hub, the disc must have a hole pattern matched to the
seat, even at low pressure. wheel bolts and hub configuration.
Trelleborg 15° rims from diameter 22.5” up to 30.5” are equipped with humps. A = Centre hole diameter
1 = Hump B = Pitch circle diameter
2 = Bead seat C = Stud hole
3 = Rim Flange (+ stud hole design + N° of stud holes)
1 = Size designation
2 = Product code
3 = Manufacturer
4 = Date (month and year)
The centre hole diameter has in some cases tight tolerances. This when hub centering is used
Rim offset to fix the wheel in right position on the hub. This concept is combined with plain stud hole
Rim offset states the position for the disc hub contact design.
surface related to the rim centreline. The pitch circle diameter always has tight tolerances. This is also the case for the stud hole
0 = disc hub contact surface lined with centreline. spacing (distance between the stud holes).
+ = disc hub contact surface lined outside centreline. Stud hole designs are available with following alternatives:
– = disc hub contact surface lined inside centreline. 1 = plain
An increasing (+) value for the offset gives a 2 = conical one sided
decreasing wheeltrack setting value and a decreasing 3 = conical double sided
(-) value gives increasing wheeltrack setting. 4 = spherical one sided
5 = spherical double sided
It is important to clarify correct kind of stud hole design, otherwise there is an high risk of
loose wheels and wheel damages.
Painting
All TWIN wheel rims are painted with a powder coating, giving a very high finish and durability.
The wheels can be delivered in following basic colors: silver, white, red, yellow (construction
type) ands yellow (John Deere type) as well as other special colors.
268 269
Measuring of Twin wheels Technical information Valves Technical information
This information is needed for the correct mounting of Twin Wheels: C and L Type
Ø
TYPE ETRTO TRA A
VALVE HOLE
Type of machine C V2-01-1 TR 13 1.38 0.45
L V2-01-2 TR 15 1.38 0.63
Make
Ø 0.30 x 0.03
Model Year
B
Size original tire A
Axle load lb
C
A. Hub flange distance
D B. Sidewall
Sidewall (outer)
C. Disc hubside - Sidewall (inner)
D. Total width T (Air/Water type valve)
E E. Clearance, Sidewall - Machine
Ø
F F. Clearance, Tread - Machine TYPE ETRTO COMPONENTS TRA COMPONENTS A
VALVE HOLE
G G. Centre bore diameter T V4-03-1 V4-01-1 V4-02-1 TR218A SP218A 1.06 0.63
TR CH3
T V4-03-2 V4-01-2 V4-02-1 TR220A SP220A 1.40 0.63
Ø 0.30 x 0.03
V4-02-1 TRCH3
R°
d1
0.21
d1
d2
d2
d1
Core housing
V4.02.1
Stud hole design - plain Stud hole design - conical Stud hole design - spherical
d1 d2 R° α
Stud hole design (inches) (inches) V4-01-1 SP218A
V4-01-2 SP220A
Plain
Conical A
Spherical
270 271
Z (Screw-on universal valve)
The "MECHANICAL LEAD" (L) is the percentage relative ratio between the peripheral speeds of
Ø 0.30 x 0.03
V9.05.1 the front and rear tires.
Rubber groincheset B
Ø 0.30 x 0.03
Coinchesonly, the correct advancement of the tractor with double traction foresees a value of L
included between +1 and + 5% (peripheral speed of front tires > peripheral speed rear tires).
Ø 0.47
A
T° Values of L out of this range could cause problems of handling instability (L < 1, the rear axle
"pushes" the tractor in excessive way respect to the frontal axle) or cause excessive creeping
Z Base Single bend between the front and rear tires (L > 5, excessive mechanic effort of all the transmission chain).
In both the cases, rises difficulty in the management / insertion of the "gears" and the tires are
B C D subjects to rapid and uneven wears.
B
T°
ß°
Ø12 Ø 0.30 x 0.03
Calculation of the front lead
Ø 0.30 x 0.03
C A
Ø12 a°
A The measure must be implemented with the following conditions:
a° - Tractor equipped with standard front ballast
Triple bend
- Nominal tires pressure
Double bend - Tract of smooth and level surface at least 154 ft.
Core housing
V4.02.1
V5-01-1
Rubber groincheset
V9.10.1
Valve hole
16
272 273
Measure of the rolling circumference on the field
The measure must be calculated in the following way: Liquid ballasting Practical advices
- remove the double traction (the rolling of the front and rear wheels have
to be independent)
- mark the front and rear tires sidewall, on the middle of the tire-foot print area Occasionally the machine needs extra weight to increase tractive power but also to lower the centre
- mark the rolling surface in correspondence of the middle of the tire-foot print area of gravity for improved stability.
- move the tractor forward so that the front and rear tire complete exactly 5 revolutions Primary, wheel or chassis mounted weights should be used, but on occasions when this is
- mark on the rolling surface the point at the end of the 5th revolution, respectively impossible, the tires can be liquid filled.
for the front and rear tires
- measure the distance crossed respectively to the front (f) and rear (r) tires Liquid filling alters tire characteristics:
- tires get more rigid and less flexible
- CALCULATION OF Cr (front) = F[m] / n° of revolutions = a / 5 - rolling resistance increases
- CALCULATION OF Cr (rear ) = R[m] / n° of revolutions = p / 5 - increased risk of damage to tires, rims and axles
- considerably increased forces during road operations
forward of
Liquid recoinchesendations
5 rev. In areas without any risk of freezing:
- tubed tires - water only
Distance “F” after 5 rev. of the front tire - tubeless tires - water + anti corrosion fluid, usually ethylene glycol
CALCULATION OF RM = (front tire revolutions + rev. fraction) / Never pour the water into the calcium chloride: it is dangerous. Always mix calcium chloride
complete rear tire revolutions in to water.
- Clean all the metal parts of the vehicle carefully when the filling or drainage operations are
complete, as they may have come into contact with the anti-freeze, which is corrosive.
forward of
5 rev. rear tire - Check tire pressure frequently as the quantity of air remaining in the tire is low.
274 275
Mixing of anti-freeze fluid
The following proportions may be used as a general guide: Liquid filling instructions Practical advices
Calcium-chloride (Ca Cl2)
Liquid filling valves
Temperature Ca Cl2 (lb) Water (gal) Total weight (lb)
Agricultural wheels are normally equipped with combined air and liquid-filling valves. For tube tires
°C (per gal solution) (per gal solution) (per gal solution)
the valve number is TR218A and TR220A (or ETRTO 4.03.2) and TR618A for tubeless tires (or
–10 1.17 7.93 9.10 ETRTO V5.15.1).
–20 2.00 7.51 9.51
–30 3.00 6.93 9.93 Instructions for liquid filling
–40 4.09 6.34 10.43 1. Tires should be mounted as usual with required bead seating pressure.
2. Equip the tractor with the required tools.
Example: tire dimension 650/60-38 TWIN 414 3. Inflate the tires to the recoinchesended pressure.
Volume at 75% filling level = gal 156 4. Move the tractor until the valve is pointing to desired filling level (at the highest vertical point
Wanted anti-freeze temperature -30 °C for 75%).
5. Insert a jack under the axle, near the wheel, and raise it until it makes contact with the axle
* Amount of Ca Cl2 156 x 3.00 = 468 lb (the jack will sustain the tractor in the original position when the tire is deflated).
* Volume of water 156 x 6.93 = 1081 lb 6. Deflate the tire. Unscrew the entire air valve housing.
* Total weight 156 x 9.93 = 1549 lb 7. Connect the liquid filling valve (this is a special valve with an air drain pipe).
8. Introduce the liquid into the tire through a normal rubber hose fixed to the stem of the valve
until it flows out of the drainpipe.
Ethylene glycol 9. When the liquid filling valve is not available, introduce liquid in to the tire by fixing a normal
rubber hose to the stem of the normal valve. During the filling operation occasionally remove
Temperature Glycol (gal) Glycol(lb) Water (gal) Total weight (lb) the hose from the valve in order to allow the air in the tire to escape.
°C (per gal solution) (per gal solution) (per gal solution) (per gal mixed fluid) 10. Stop filling when water starts to come out.
11. Replace the air valve and inflate to the desired pressure (same as point 3).
–10 0.23 2.17 6.43 8.60
–20 0.33 3.09 5.59 8.68 Note: Only use an inflation pressure gauge that is resistant to anti-freeze liquid. Make sure that the
–30 0.43 4.01 4.76 8.76 air valve is above liquid level before measuring the air pressure.
–40 0.53 4.92 3.92 8.85
276 277
Liquid ballasting (Radial)
Volume of solution Solution (up to -20°c) Solution (up to -40°c) Volume of solution Solution (up to -20°c) Solution (up to -40°c)
Size Rim (gal) Quantity Quantity of Total Mass Quantity Quantity of Total Mass Size Rim (gal) Quantity Quantity of Total Mass Quantity Quantity of Total Mass
(at Valve Level= 75%) CaCI2 (lb) water (lb) (lb) CaCI2 (lb) water (lb) (lb) (at Valve Level= 75%) CaCI2 (lb) water (lb) (lb) CaCI2 (lb) water (lb) (lb)
710/60R30 DW23B 137 273 524 1300 559 442 1426 260/70R16 W8 9 20 66 86 35 55 90
900/60R32 DW30B 265 530 1014 2519 1082 857 2763 280/70R16 W9 11 24 82 106 44 68 112
650/60R34 DW20B 117 233 448 1111 477 378 1219 280/70R18 W9 12 26 88 115 49 73 121
710/60R34 DW23B 150 297 571 1417 609 482 1555 260/80R20 W8 13 30 99 129 55 84 139
900/60R38 DW28B 286 570 1092 2710 1166 922 2974 300/70R20 W9 15 33 110 143 60 93 152
900/60R42 DW28B 306 612 1170 2906 1250 988 3188 320/70R20 W10 18 42 139 181 75 117 192
360/70R20 W11 25 55 185 240 101 157 258
380/70R20 W12 30 66 225 291 121 190 311
320/70R24 W10 22 51 170 220 93 143 236
360/70R24 W11 26 60 198 258 108 168 276
380/70R24 W12 34 77 258 335 141 218 359
420/70R24 W13 44 97 328 425 179 278 456
480/70R24 W15L 56 128 423 551 229 357 586
480/70R26 W15L 61 157 459 615 249 388 637
Volume of solution Solution (up to -20°c) Solution (up to -40°c) 320/70R28 W10 25 55 187 243 101 157 258
Size Rim (gal) Quantity Quantity of Total Mass Quantity Quantity of Total Mass 360/70R28 W11 32 73 243 315 132 205 337
(at Valve Level= 75%) CaCI2 (lb) water (lb) (lb) CaCI2 (lb) water (lb) (lb) 380/70R28 W12 38 84 287 370 157 240 397
420/70R28 W13 49 110 368 478 201 311 511
440/65R24 DW14L 40 90 300 390 163 254 417 480/70R28 W15L 59 132 448 580 243 377 619
480/65R24 DW15L 49 112 373 485 203 313 516 600/70R28 DW18L 105 209 401 994 427 339 1091
540/65R24 DW16L 65 148 492 639 267 414 681 420/70R30 W13 52 117 388 505 212 328 540
540/65R26 DW16L 71 143 560 703 291 452 743 480/70R30 W15L 68 152 507 659 276 430 705
440/65R28 DW14L 45 101 335 437 183 284 467 520/70R30 W16L 84 190 635 825 346 536 882
480/65R28 DW15L 54 123 410 534 223 346 569 600/70R30 DW18L 110 218 420 1041 449 355 1144
540/65R28 DW16L 73 163 547 710 298 461 758 480/70R34 W15L 75 170 567 736 309 478 787
600/65R28 DW18L 96 216 719 935 392 608 1001 520/70R34 W16L 92 209 694 904 379 586 966
540/65R30 DW16L 76 172 573 745 313 485 798 600/70R34 DW18L 120 240 459 1140 488 387 1247
800/65R32 DW27B 223 444 850 2112 909 718 2317 480/70R38 W15L 82 185 615 800 335 520 855
540/65R34 DW16L 84 190 628 818 342 531 873 520/70R38 W16L 100 227 754 981 410 637 1047
600/65R34 DW18L 109 245 816 1060 443 688 1131 580/70R38 W18L 131 295 988 1283 538 833 1371
540/65R38 DW16L 90 203 679 882 370 573 944 710/70R38 DW23B 201 452 1508 1960 820 1274 2094
600/65R38 DW18L 118 265 884 1149 481 747 1228 800/70R38 DW25B 270 539 1031 2561 1100 871 2807
650/65R38 DW20B 143 322 1074 1396 584 906 1490 580/70R42 W18L 137 309 1030 1338 560 869 1429
600/65R42 DW18L 127 287 955 1241 520 807 1327 620/70R42 DW20B 155 351 1168 1519 637 988 1625
650/65R42 DW20B 154 346 1155 1501 628 974 1603 710/70R42 DW23B 211 422 808 2006 862 682 2200
278 279
Volume of solution Solution (up to -20°c) Solution (up to -40°c) Volume of solution Solution (up to -20°c) Solution (up to -40°c)
Size Rim (gal) Quantity Quantity of Total Mass Quantity Quantity of Total Mass Size Rim (gal) Quantity Quantity of Total Mass Quantity Quantity of Total Mass
(at Valve Level= 75%) CaCI2 (lb) water (lb) (lb) CaCI2 (lb) water (lb) (lb) (at Valve Level= 75%) CaCI2 (lb) water (lb) (lb) CaCI2 (lb) water (lb) (lb)
620/75R26 DW20B 127 253 485 1203 517 410 1320 500/60R22.5 AG16.00 54 108 403 511 218 340 558
650/75R32 DW20B 157 315 601 1494 642 508 1639 560/60R22.5 AG16.00 65 148 489 637 267 414 681
710/75R32 DW23B 201 400 769 1907 821 650 2094 580/65R22.5 AG16.00 79 179 597 776 324 505 829
650/75R38 DW23B 184 367 705 1749 752 595 1918 600/50R22.5 AG20.00 63 127 486 613 259 402 661
710/75R42 DW23B 235 469 899 2231 959 758 2446 600/55R26.5 AG20.00 84 170 635 805 346 536 882
680/55R26.5 AG20.00 102 229 765 994 417 646 1063
710/50R26.5 AG24.00 100 201 754 955 412 637 1049
Volume of solution Solution (up to -20°c) Solution (up to -40°c) 750/60R30.5 AG24.00 178 357 1340 1698 730 1131 1861
Size Rim (gal) Quantity Quantity of Total Mass Quantity Quantity of Total Mass 650/65R30.5 AG20.00 141 282 1058 1340 575 893 1468
(at Valve Level= 75%) CaCI2 (lb) water (lb) (lb) CaCI2 (lb) water (lb) (lb) 850/50R30.5 AG28.00 185 370 1393 1764 758 1177 1936
280 281
Liquid ballasting (Cross-ply construction) Liquid ballasting (Forestry)
Volume of solution Solution (up to -20°c) Solution (up to -40°c) Volume of solution Solution (up to -20°c) Solution (up to -40°c)
Size Rim (gal) Quantity Quantity of Total Mass Quantity Quantity of Total Mass Size Rim (gal) Quantity Quantity of Total Mass Quantity Quantity of Total Mass
(at Valve Level= 75%) CaCI2 (lb) water (lb) (lb) CaCI2 (lb) water (lb) (lb) (at Valve Level= 75%) CaCI2 (lb) water (lb) (lb) CaCI2 (lb) water (lb) (lb)
Twin Implement Twin Forestry (*)
280/60-15.5 AG8.00 12 24 90 115 49 75 123 400/60-15.5 AG13.00 19 37 174 211 77 146 223
400/55-17.5 AG11.75 22 44 170 214 93 143 236 500/45-22.5 AG16.00 25/37 53/75 187/278 240/353 101/152 157/234 258/386
400/55-22.5 AG11.75 29 57 218 276 119 185 304 500/60-22.5 AG16.00 40/59 82 /119 298/445 379/564 161/243 251/377 412/619
500/45-22.5 AG16.00 37 75 278 353 152 234 386 600/50-22.5 AG20.00 61 123 461 584 251 390 641
500/60-22.5 AG16.00 59 119 448 567 243 377 619 650/45-22.5 AG20.00 64 123 483 613 42 408 450
400/60-26.5 AG13.00 42 84 317 401 172 269 441 710/40-22.5 AG24.00 53/80 108/161 401/604 509/765 218/328 337/509 556/838
500/60-26.5 AG16.00 70 141 527 668 287 443 730 710/40-24.5 AG24.00 75 150 567 717 309 478 787
800/40-26.5 AG28.00 120 240 904 1144 492 763 1254 600/55-26.5 AG20.00 82 165 617 782 337 522 859
600/60-30.5 AG20.00 100 201 754 955 410 637 1047 710/45-26.5 AG24.00 65 /98 132/196 487/734 619/930 265 //399 410/619 675/1019
Twin AMPT 750/50-26.5 AG24.00 84/125 172/251 635/941 807/1193 346/514 536/796 882/1310
620/50B22.5 AG20.00 70 141 527 668 287 443 730 600/60-30.5 AG20.00 67/100 137/201 507/754 644/955 276/410 428/637 703/1047
650/45B22.5 AG20.00 65 130 487 617 265 410 675 620/55-30.5 AG20.00 62/92 126/185 467/694 593/880 254/379 395/586 648/966
710/40B22.5 AG24.00 81 161 606 767 328 511 840 710/50-30.5 AG24.00 83/124 168/249 628/937 796/1186 342/511 531/791 873/1303
620/55B26.5 AG20.00 84 170 635 805 346 536 882 750/45-30.5 AG24.00 79/119 161/238 595/893 756/1131 324/487 503/754 827/1241
650/55B30.5 AG20.00 100 201 754 955 410 637 1047 600/65-34 DW20B 80/120 163/240 604/902 767/1142 328/492 509/763 838/1254
750/50B30.5 AG24.00 121 243 913 1155 496 772 1268 710/55-34 DW24B 100/149 201/300 747/1120 948/1420 408/611 631/946 1038/1556
Twin Garden Tractor 750/65-34 DW24B 129/193 260/386 966/1451 1226/1836 527/789 816/1226 1343/2015
400/55-17.5 AG11.75 22 44 170 214 93 143 236
400/55-22.5 AG11.75 29 57 218 276 119 185 304 (*): Max 50% filling volume for tire operating in heavy terrain
500/45-22.5 AG16.00 37 75 278 353 152 234 386
500/60-22.5 AG16.00 59 119 448 567 243 377 619
550/45-22.5 AG16.00 48 95 357 452 194 302 496
550/60-22.5 AG16.00 71 143 536 679 291 452 743
23.1-26 DW20B 131 262 983 1246 536 829 1365
600/60-30.5 AG20.00 100 201 754 955 410 637 1047
Agroforest
320/85-24 W11 28 55 207 262 112 176 289
380/85-24 W12 41 82 306 388 168 134 302
380/85-28 W12 45 88 337 425 183 284 467
420/85-28 W15L 59 119 445 564 243 377 619
420/85-30 W15L 62 123 465 589 254 392 646
460/85-30 W16L 82 163 615 778 335 518 853
420/85-34 W15L 70 139 525 664 287 443 730
460/85-34 W16L 88 176 664 840 362 560 922
420/85-38 W15L 73 146 545 690 295 461 756
460/85-38 W16L 91 181 683 864 373 578 950
520/85-38 DW16L 124 247 933 1179 507 787 1294
282 283
Tire maintenance Practical advices
Tires are the only contact between the vehicle and the ground. - Be careful not to damage any parts of the tire or tube during fitting and removal.
It is therefore of paramount importance that tires be maintained in good condition at all times and - Always use the proper specialized equipment and tools and the approved type of lubricant
that, when the time comes to change them, the correct replacements are fitted. (never use silicone or petroleum-base lubricants).
The tires fitted to your vehicle as original equipment were selected by the vehicle and tire
manufacturers taking into account all aspects of the vehicle's operation. - Clean the tire bead area and the contact area between the rim and the tire.
Changes in tire size, structure, load and speed rating should not be made without first seeking - Check that the tire, tube and the flap are perfectly compatible.
advice from the tire or vehicle manufacturer, as the effect on safety, vehicle behaviour and
- In the case of TUBE TYPE tires, ensure there is no air between the tire and inner tube.
clearance must be considered.
- For correct fitting of tube type tires, it is advisable to lightly powder and partially inflate the tube
before placing it inside the tires in order to avoid creasing.
- Ensure that the tire is centred on the rim.
Tire fitting and removal
General instructions
- Tire fitting and removal can be dangerous.
Entrust these operations to specially trained experts only, using proper tools and procedures.
Lubricant procedure
- If not performed by qualified personnel, these operations may cause visible or invisible damage Lubricate the rim bead seat, rim flange and tire bead with an appropriate fitting lubricant
to the tire and rim, which may result in breakage during subsequent use. (e.g. Eurometer or a thin solution of vegetable oil, soap and water, or water only). The
- In exceptional cases in which these operations cannot be carried out by an expert, fitting and lubricant has good lubricating characteristics and dries relatively fast, which reduces the
removal must be performed by carefully following the instructions specially provided. risk of the tire slipping on the rim.
If this advice is not followed, bead damage or fracture could occur during fitting and/or
- Ensure that the tire to be fitted is the correct type and size for the vehicle concerned and the
intended use. rim slippage during normal operation, which may cause premature tire failure.
- Particular attention must be paid to the compatibility of the rim and tire centring.
- For use of 5° rims on high powered tractors, check that the rims for the drive wheels feature a
knurling in the bead seat, which is capable of stopping rotation of the tires on the rim during
moments of high traction, thus avoiding the shearing of the valve.
- Avoid painting the bead seats of rims for drive wheels with epoxy resin paints.
In the case of rims with a special finish, carefully rasp and renew the protection with a normal
anti-rust treatment.
- Fit with the same structure, tread pattern and size on the same axle of the vehicle.
- For dual fitting, use only tires of the same size, structure and groove depth and comply with the
dual spacing specified for the size used.
- With new tires, any other parts (inner tube, flap, valve sealing ring) must also be new.
- Check used tires both externally and internally for water, moisture, foreign bodies or any sign of
rust. If damage is found and assessed to be irreparable, the tire should be scrapped.
1. Bead
- The rim must be clean and in good condition, especially if it has already been used.
2. Bead Seat
- Discard rusty, deformed, damaged or re-welded rims and rim components. 3. Bead Seat well
284 285
Fitting procedure Inflation must be performed in three steps
N.B.: Fit and remove tires on DW type rims on the flange nearer the lower well (irrespective Step 1
of valve position). Max inflation pressure
• Tubeless - 1.5 bar for tires with tire diameter 15"or less
- Fasten the valve core housing in the valve hole. - 1.0 bar for all other tires
- Fit the tire on the rim, placing the inner bead over the flange at the top. Be sure the bead is - For wheels with BLS (tire lock) separate instructions must be followed
not "hung up"on the bead seat flange. It should move into the rim well. Ensure that the beads are correctly positioned on the bead seat. If not, deflate the tire and centre
• Tube type it on the rim.
- Pull the tire towards the outside of the rim as far as possible in order to make room for the
tube. Step 2
- Before inserting the tube in the tire, ensure that the valve is positioned at the bottom of the Do not exceed the recommended maximum fitting pressure during inflation.
wheel. Align the stem with the valve hole and place the tube in the tire, starting at the bottom. In case of doubt or any difficulty, contact a specialist.
Place the valve in the valve hole and screw the rim nut in place. Be sure that the tube is well - Inflation up to max bead seating pressure with a safety device (blast cage or distance filling)
inside the rim.
• Starting at the top, use the fitting tools to lift the outer bead up and over the rim flange, then
down into the rim well. After positioning the first section of the outer bead in the rim well, place 72.51 psi for tires fittes on 15-degree rims
one hand against the section to hold it in place and then use the other hand to pry the
remainder of the bead over the flange with the fitting tools.
• Centre the tire on the rim. This is extremely important in order to prevent broken beads and assist 50.76 psi for Radial tractor tires
the correct positioning of the bead on the rim bead seat during inflation.
the tire must firstly be inflated to a pressure 20% higher than the service air pressure and then
adjusted to service pressure.
figure 1 figure 2 figure 3
286 287
Removal procedure
- Deflate the tire by removing the valve core. After deflating, remove the rim nut and push the valve Storage Practical advices
through the valve hole (for tube type tires).
- When the tire is completely deflated, place a hydraulic "bead unseating" tool between the tire - Keep the tires away from heat and ozone sources.
bead and rim flange and force the bead off the bead seat.
- Avoid prolonged exposure of the tires to direct sunlight.
- Carefully lubricate the tire bead and the rim flange area with an appropriate fitting lubricant.
- Avoid any contact with grease, petrol, volatile solvents or other substances that may deteriorate
- Push the outside bead at the bottom of the wheel into the well. Do not use excessive force. Insert the rubber.
tire lever under the bead at the top of the wheel and carefully pry the bead over the rim flange.
- Avoid horizontal storage for tubeless tires (whether radial or cross-ply); only small size tires may
- Hold that bead section over the flange with a tire lever and use another to pry the next section be stacked or stored flat (for a maximum of 6 months).
over the flange.
When tires are stored flat, the position must be lug against lug.
- To remove the tire completely from the rim, insert the tire lever under the inside bead at the side
of the tire. Carefully pry the rest of the inside bead over the rim flange, ensuring that the bead - Reduce inflation pressure when tires are stored fitted on rims.
area at the top of the tire is down in the well of the rim. - Turn over stock constantly.
Shipment pressure - Inner tubes and flaps must never be hung up, but always stored on shelves.
Complete wheels shipped from the Trelleborg warehouse are usually inflated to the following
shipment pressures:
- 1.0 bar for tractor and garden tractor wheels
- 1.5 bar for implement wheels
- 2.0 bar for other wheels
N.B.: These shipment pressures must be adjusted to the correct level according to the Technical
Data tables, before use.
288 289
Use and maintenance Practical advices Others Practical advices
- Adapt driving manner and speed to the vehicle load, the environmental conditions and the road - Tires age, even if they have not been used or have only been used occasionally. Cracking of the
surface. tread sidewall rubber, sometimes accompanied by carcass deformation, is evidence of ageing.
- Avoid overload, either total or localized, with a suitable load distribution. Overload greatly affects Old and aged tires must be checked by tire specialists to ascertain their suitability for further
the tire's life. use.
- After tire fitment, check nuts are still tight after 3 hours' use and then subsequently at regular - Tires fitted to vehicles that are parked for long periods will tend to age a crack more quickly
intervals. than those that are used and run frequently.
- Use a proper gauge (periodically checking its calibration). In such circumstances it is important to jack the weight off the tires and protect the tire from
direct sunlight.
- Do not allow the tire to stand on hydrocarbons in general (oil, Diesel oil, grease, etc.).
- The tires on a vehicle should be examined with particular attention being paid to the:
• tread, for evidence of abnormal wear, cuts, localised deformities and foreign bodies (grit, scrap
metal, etc.)
• sidewalls, for cuts, cracks, impact damage, and localized deformities
• bread/rim flange region, for signs of chafing, rim damage, misfitment
• between twin tires, for cracks, abrasion, localized deformities and foreign bodies
- If there are objects lodged between the duals, first of all deflate the two tires.
- A tire specialist should be also consulted if a tire has suffered a heavy impact, even though no
damage is visible, because damage could seriously curtail tire life.
- Following a puncture, it is imperative to pullup as soon as possible, because working under
flated may cause structural deterioration.
- A tire which has been punctured must always be removed from the wheel to be checked for
secondary damage.
- If a repair to a tire is necessary and feasible, it must be carried out by a tire specialist as soon
as possible in order to avoid further deterioration of the structure.
- In any case, all tire repairs must be entrusted to a tire specialist who must then take full
responsibility for them.
290 291
How to calculate the right pressure for dual or triple wheel mounting Practical advices
Divide the axle load by the number of tires, then divide that figure by the factor:
Example 3:
FACTOR = 0.88 for dual
0.82 for triples Tires: 480/70R38 TM700 145A8
Load on rear axle: 22.046 lb
This gives the reference load that can be used in the technical manual to find out inflation Load for tire: 22.046 lb / 6 = 3.674 lb
pressure or maximum ballast. Load to be considered: 3.682 lb / 0.82 = 4.490 lb
• Condition of service: 5 mphHT
• Pressure: 8 psi
(consider the minimum pressure suggested in HT - 12 psi)
Example 1:
• Condition of service: 5 mph LT
• Pressure: load not present in the load/pressure table
Tires: 540/65R38 TM800 147D (consider the minimum pressure suggested in LT – 9 psi)
Load on rear axle: 13.228 lb
Load for tire: 13.228 lb / 2 = 6.614 lb
Note:
Example 2: - In LT the minimum suggested pressure is 9 psi
- In HT the minimum suggested pressure is 12 psi
Tires: 540/65R38 TM800 147D
Load on rear axle: 22.046 lb
Load for tire: 22.046 lb / 4 = 5.511 lb
Load to be considered: 5.511 lb / 0.88 = 6.262 lb
292 293
294 Notes Notes 295
296 Notes Notes 297
298 Notes
Trelleborg Wheel Systems reserves the right to modify the data
contained in this issue without notice.