Remark(before analysising)

1. Once you get the log file ,first check if all the route in the cluster has

been covered,ifnot,the log is useless,tell the DT Teams to test again

2. If you are now using the logs for ATP report ,check if the time reached 4

[Link] not, the log is useless,tell the DT Teams to test again

3. When you are analysisingthe Log file ,make sure you have selected the

right Log files,if the log file is not right ,all the KPI you get is useless.
4. In the bracket of the name of each KPI is the services we need the

[Link] there are many service ,it means all these services’s pictures is

need

5. Some pictures and KPIs are together ,we can finish it at the same time to

save our time.

6. The Threshold and the coloer must be the same as the picture.

7. Combine all the logs if there are many logs with the same service.

Here shows how to Combine:

8. Log name: when you get a log ,the name of it may be very long ,so in the

lengend it will be

very long ,it’s not good to see ,such like follow:

So we need to change the log names like this:

Cluster 6 -short call

Cluster 7 –HSDPA short call

It’s short and easy to see

So please rename the log before analysising(if the log with 2 MS,copy 2

with different names)

★★★Drive Route & Collected Samples(Part 3

in report)

Pictures:
Position：
★★★Belows are picture we need:（Part

5/6 in report）

★★★ Total List ★★★：

Servic Pictures We Need check

es

Scanne Best Server 　

RSCP 　

RSCP-Histogram 　
 RSCP-Graph 　

EcIo 　

EcIo Histogram 　

EcIo-Graph 　

　 　 　

Long Best Server 　

Call

RSCP 　

RSCP-Histogram 　

RSCP-Graph 　
 EcIo 　

EcIo Histogram 　

EcIo-Graph 　

TxPower 　

Pilot Pollution 　

Active Set Size 　

Droped Call 　

　 　 　

Short Best Server 　

Call-to RSCP 　

Mobile

RSCP-Histogram 　

RSCP-Graph 　

EcIo 　

EcIo Histogram 　

EcIo-Graph 　

TxPower 　

Pilot Pollution 　

Active Set Size 　

 Droped Call 　

Access Failures 　

　 　 　

HSDPA Best Server 　

Long

RSCP 　

RSCP-Histogram 　

RSCP-Graph 　

EcIo 　

EcIo Histogram 　

EcIo-Graph 　
 TxPower 　

Pilot Pollution 　

HSDPA Throughput 　

HSDPA CQI 　

Droped Call 　

　 　 　

HSUPA Best Server 　

Long

RSCP 　

RSCP-Histogram 　
 RSCP-Graph 　

EcIo 　

EcIo Histogram 　

EcIo-Graph 　

TxPower 　

Pilot Pollution 　

HSUPA Throughput 　

Droped Call 　

　 　 　
R99 PS Best Server 　

RSCP 　

RSCP-Histogram 　

RSCP-Graph 　

EcIo 　

EcIo Histogram 　

EcIo-Graph 　

Pilot Pollution 　

R99 Throughput DL 　
 R99 Throughput UL 　

Access Failures 　

Droped Call 　

　 　 　

HS Access Failures 　

Short

　 　

　 　 　

Short \ 　

Call to

PSTN
★★★ Example and Notice ★★★

Some other Notice:

1. In the picture, no need to show PSC\NodeB ID\Sector ID, just show the

sites, and the site should be on the front layer.

 2. In the picture ,the route should be full-screen,the cluster boundary

\PreDT route should be shown on the map ,don’t show other things.

3. The legend and the color should allow the pictures below.

4. The names of superscream should be like this:

Cluster6-Long Call

Cluster6-Short Call to Mobile

Cluster6-Short Call to PSTN

Cluster6-HSDPA Long

Cluster6-HSUPA Long

Clusetr6-R99

CLuset6-Scanner

Cluster6-HS Short

KPI：Best Server

Snapshot：
Position：
KPI：Best Server(Just for Scanner)

Position：
KPI：RSCP

Snapshot：
Position：
KPI：RSCP -Histogram

Snapshot

Position：
 Method ： fill the percentage into the Excel(only the GREEN colum) file

which I send to you，and then the graph will appear automaticly。

-----this Excel file

aut omati c
generat e graph f or RSCP and ECNO. zi p

KPI : RSCP-Graph

Position：
 Method ： fill the percentage into the Excel(only the GREEN colum) file

which I send to you，and then the graph will appear automaticly。

-----this Excel file

aut omati c
generat e graph f or RSCP and ECNO. zi p

KPI：RSCP（Just for scanner）

Snapshot：
Position：
KPI：RSCP（Just for scanner）-Histogram

The method as the same as KPI：RSCP-Histogram

KPI：RSCP（Just for scanner）-Graph

The method as the same as KPI：RSCP-Graph

KPI：Ec/Io

Snapshot：
Position：
KPI：Ec/Io –Histogram

For scanner may be different ，ask ZhuJin

Snapshot:

Position：
 Method ： fill the percentage into the Excel(only the GREEN colum) file

which I send to you，and then the graph will appear automaticly。

-----this Excel file

aut omati c
generat e graph f or RSCP and ECNO. zi p

KPI : Ec/Io –Graph

Position：
 Method ： fill the percentage into the Excel(only the GREEN colum) file

which I send to you，and then the graph will appear automaticly。

-----this Excel file

aut omati c
generat e graph f or RSCP and ECNO. zi p

KPI：Ec/Io（Just for scanner）

Snapshot:
Position：
KPI：Ec/Io（Just for scanner）-Histogram

The method as the same as KPI：Ec/Io-Histogram

KPI：Ec/Io（Just for scanner）-Graph

The method as the same as KPI：Ec/Io-Graph

KPI：TxPower

Snapshot：

Position：
KPI：Pilot Pollution

Snapshot：
Position：
The definination of PilotPollution:
KPI：Active Set Size

Snapshot：
Position：
KPI：HSDPA Throughtput

Snapshot：
Position：
KPI：R99 Throughtput DL

Snapshot：
Position：
KPI：HSUPA Throughtput

Snapshot：
Position：
KPI：R99 Throughtput UL

Snapshot：
Position：
KPI：HSDPA CQI（DL）

Snapshot：
Position：
KPI：Access Failures

Snapshot：
Position：
KPI：Droped Call

Snapshot：
Position：
★★★Belows are DT KPIs we need ： （ part

9/10/11 in report）

★★★ Total List ★★★：

Part 9

Devi Type Information Mode Total Actu Accept Accept Comm

ce of Element attempts al Limit(As Per ance ents

Call valu SOW) (%)

Voice 1- CSV Access Setup CS Setup 　 <1.0% Yes 　

Short( MS2 Failure Rate -A Calls

 to *Voice Call Setup CS Setup 　 95th percentile Yes 　

Mobil Setup time -A Calls ≤ 9 seconds

e) (Mobile to

Mobile)

PS 1- PSD Access Setup 　PS 　 ≤ 1.0 % Yes 　

DL/UL MS3 Failure Rate -B Setup

Calls

PSD Drop Setup 　　PS 　 ≤ 1.0 % Yes 　

Rate -B Setup

Calls

PSD R99 Setup 　PS 　 ≥ 210 Yes 　

Average DL -B Setup

throughput Calls

(kbps) Loaded
 PSD R99 Setup 　　PS 　 ≥ 180 Yes 　

Average UL -B Setup

throughput Calls　

(kbps)-

Loaded

PSD Call Setup 　　PS 　 95th percentile Yes 　

Setup time -B Setup sessions ≤ 3

Calls seconds

Voice 2- *Voice Call Setup 　CS 　 95th percentile Yes 　

Short( MS1 Setup time -A Setup ≤ 5 seconds

to (Mobile to Calls　

PSTN PSTN)

HSUP 2- HSUPA Setup Time 　 > 0.8 Mbps Yes 　

A MS2 Average UL -B （XXXmin

Long Throughput s）

(kbps) for UE

category 3

under load

HSUPA Drop 　 　Time 　 ≤ 1.0 % 　 　

Rate （XXXmin

s）

Voice 3- CSV Drop Setup 　Time 　 <1.0% Yes 　

Long MS1 Rate -A （XXXmin

s）

CSV Quality Setup 　 　 95th percentile Yes 　

(DL) -A of samples ≤

2.0 % BLER

Soft/Softer Setup 　 　 <1.6 Yes 　

 Handover -A

Overhead

HSDP 3- HSDPA Setup 　 　 > 2 Mbps Yes 　

A MS2 Average DL -B

Long Throughput

(kbps) for UE

category 8

under load

HSDPA Drop Setup 　 　 ≤ 1.0 % Yes 　

Rate -B

HS 4- HSDPA Setup 　 　 ≤ 1.0 % Yes 　

Short MS2 Access Failure -B

Rate

HSUPA Setup 　 　 ≤ 1.0 % Yes 　

 Access Failure -B

Rate

Part 10

Devi Type Information Mode Total Actu Accep Accepta Comments

ce of Element attempts al t nce

Call valu Limit(

e As Per

SOW)

(%)

5- HSPA HSDPA 5-DC1 HSPA Ping 1000 95th Yes 　

DC1 Ping Latency- 0 percenti

Stationary le

session

s ≤ 100

ms
HSUP Stationary 　 HSUPA N/A > 1.2 Yes 　

A Maximum UL Long Mbps

Long HSUPA Bit

Rate (kbps)

under no load

(UE Category

3)

HSDP Stationary 　 HSDPA N/A >6 Yes 　

A Maximum DL Long Mbps

Long HSDPA Bit

Rate (kbps)

under no load

(UE Category

8)

HS HSDPA 　 HS Short Count 95th Yes 　

Short Session percenti

 Activation le

time- session

Statianary s<5

second

5- PS PSD Latency 5-DC2 PS Ping 1000 95th Yes 　

DC2 Ping 0 percenti

le

session

s ≤ 100

ms

Part 11

Devi Type Information Mode Total Actu Accep Accepta Comments

ce of Element attempts al t nce

Call valu Limit(

 e As Per

SOW)

(%)

4- GSM CSV Access Setup Setup OK 　 / Yes 　

MS1 Short Failure Rate -A + Setup

Call Fail

CSV Drop Setup Call 　 / Yes 　

Rate -A Complete

Time

+Drop

Time
KPI ： CSV Access Failure Rate–From short call

（Mobile to Mobile）

If this value don’t meet’s our target （ 1% ）， Check that if CS Call Setups

>400,if not ,tell me

Position:
 Description:

CSV Access Failure= CS Failed Setups / CS Call Setups *100%

Example:

CSV Access Failure = 1/7 *100% = 14.28%

KPI ： *Voice Call Setup time (Mobile to

Mobile)–From Short Call （Mobile to Moble）

Position:
 Description:

From RRCConnectionReq to Alerting

Example:

In the picture ,the percent of the time less than 9s is 100%

KPI：PSD Access Failure Rate – PS R99

Position:
 Description:

HSDPA Access Failure= PS Failed Setups / PS Call Setups *100%

Example:

HSDPA Access Failure = 0/12 *100% = 0%

KPI：PSD Drop Rate – PS R99

Position:
 Decription：

PSD Drop Rate = PS Dropped Calls / PS Successful Calls *100%

Example：

In this picture, PSD Drop Rate = 0/9*100% =0%

KPI：PSD average DLThroughput–From PS-R99

Position:
Open the two workbook,then operate like this:

Description:

Example:
 In this picture ,its 285kbps.

KPI ： PSD average UL Throughput–From PS-

R99

Position:
Open the two workbook,then operate like this:
 Description:

Example:

In this picture ,it’s 165 kbps.

KPI：PSD Call Setup time–from R99 PS

Position:
Description:

From RRCConnectionReq to PDPActive Complete

Example:

In this picture,the percent of time less than 3s is 99.4%

KPI ： Voice Call Setup time (Mobile to PSTN)–

From Short Call (Mobile to PSTN)

Position:

Description:

From RRCConnectionReq to Alerting

Example:
 In the picture ,the percent of time less than 5s is 98.8%

KPI ： HSUPA Average UL Throughput –HSUPA

Long

Position:
Decription：

Example：

In this picture, it’s 299.16kbps.

KPI：HSUPA Drop Call Rate–From HSUPA Long

call

Position:
Here is the time lasts:

Description:

Drop times= 1
 The lasting time: from 15:05 to 16:55 ,it’s totally 111 minutes. (make

sure the time is coutinuous, if not ,we need to minus the time it inturrupt)

The HSUPA Drop Rate = Drop times /The lasting time(minute)*1.5

Example:

The HSUPA Drop Rate = 1/111*1.5 = 1.35%

KPI：CSV Drop Rate–From Long call

Position:
Here is the times it droped

Here is the time lasts:

Description:

Drop times= 2

The lasting time: from 15:05 to 16:55 ,it’s totally 111 minutes. (make

sure the time is coutinuous, if not ,we need to minus the time it inturrupt)

The CSV Drop Rate = Drop times /The lasting time(minute)*1.5

Example:

The CSV Drop Rate = 2/111*1.5 = 2.7%

KPI：CSV Quality (DL)–From Long call

Position:

Description:

The BLER which below 2 percent

Example:

In the picture ,the CSV Quality(DL) = 95%

KPI ： Soft/Softer Handover Overhead–From

Longcall

Position:

Description:

Example:
2838*1:(2838 means the point nums of 1 pilot, 1 means that are 1 pilot in

the ActiveSet)

217*2 : (217 means the point nums of 2 pilot, 2 meast that are 2 pilots in

the ActiveSet)

19*3(19 means the point nums of 3 pilot, 3 meast that are 3 pilots in the

ActiveSet)

The Soft/Softer Handover Overhead = (2838*1+217*2+19*3)/

(2838+217+19) = 1.115
KPI ： HSDPA Average DL Throughput –HSDPA

Long

Position:
Decription：

Example：

In this picture ,it’s 309.87kbps

KPI：HSDPA Drop Call Rate–From HSDPA Long

call

Position:
Here is the time lasts:

Description:

Drop times= 1
 The lasting time: from 15:05 to 16:55 ,it’s totally 111 minutes. (make

sure the time is coutinuous, if not ,we need to minus the time it inturrupt)

The HSDPA Drop Rate = Drop times /The lasting time(minute)*1.5

Example:

The HSDPA Drop Rate = 1/111*1.5 = 1.35%

KPI ： HSDPA AccessFailure Rate–From HS

Short Call

Position:
Description:

HSDPA Access Failure= PS Failed Setups / PS Call Setups *100%

Example:

HSDPA Access Failure = 0/12 *100% = 0%

KPI ： HSUPA Access Failure Rate–From HS

Short call （ It’s the same as HSDPA Access

Failure Rate）

Position:
 Description:

HSUPA Access Failure= PS Failed Setups / PS Call Setups *100%

Example:

HSUPA Access Failure = 0/12 *100% = 0%

KPI：HSDPA Latency-Stationary

Positon:
Description：

Example:

In this picture,it’s 100%.

KPI ： Stationary Maximum UL HSUPA Bit Rate

(kbps) under no load (UE Category 3)

Position:

1
Example:

In this picture,It’s 1.448Mbps

KPI ： Stationary Maximum DL HSDPA Bit Rate

(kbps) under no load (UE Category 8)

Position:
Example:

In this picture,it’s 7.2Mbps.

KPI ： HSDPA Session Activation time-

Statianary

Position:

Example:
In this picture,it’s 100%.

KPI：PSD Latency

Positon:
Description：

Example:

In this picture,it’s 100%.

KPI：CSV Access Failure Rate-GSM

Position:
Description:

CSV Access Failure Rate = Setup Fail / (Setup OK + Setup Fail) *100%

Example:

In the picture:

CSV Access Failure Rate = 7 / (214 + 7) *100% = 3.2%

KPI：CSV Drop Call Rate-GSM

Position:
Description:

CSV Drop Call Rate = Call Dropped / (Call Complete + Call

Dropped)*100%

Example:

In this picture,it’s 2/(208+2) = 0.95%

★★★UMTS KPI Summary – OSS

Counters:(Part 8 in report)

We need the OSS KPIs like this:

Cl Rat Rat Rat Rat R R R Sof Cel U

us io io io io at at at tHa l L

te of of of of io io io nd Int Bl

r suc suc suc suc of of of ove er- o

6 ces ces ces ces C P P r RA c

K sful sful sful sful S- S- S- Suc T k

PI RR CS PS PS S H H ces CS Er

C RA RA RA p S S s Out ro

con B B B e D U Rat goi r

nec est est est e P P e( ng R

tio abli abli abli c A A %) Ha at

n sh sh sh h C C nd e(

est me me me C al al ove %

abli nt( nt( nt( al l l r )

sh %) HS HS l D D Suc

me DP UP D ro ro ces

nt( A) A) ro p( p( s

%) (%) (%) p( % % Rat

% ) ) e(

) WC

DM

A-

>G
Cl Rat Rat Rat Rat R R R Sof Cel U

us io io io io at at at tHa l L

te of of of of io io io nd Int Bl

r suc suc suc suc of of of ove er- o

6 ces ces ces ces C P P r RA c

K sful sful sful sful S- S- S- Suc T k

PI RR CS PS PS S H H ces CS Er

C RA RA RA p S S s Out ro

con B B B e D U Rat goi r

nec est est est e P P e( ng R

tio abli abli abli c A A %) Ha at

n sh sh sh h C C nd e(

est me me me C al al ove %

abli nt( nt( nt( al l l r )

sh %) HS HS l D D Suc

me DP UP D ro ro ces

nt( A) A) ro p( p( s

%) (%) (%) p( % % Rat

% ) ) e(

) WC

DM

A-

>G
Cl Rat Rat Rat Rat R R R Sof Cel U

us io io io io at at at tHa l L

te of of of of io io io nd Int Bl

r suc suc suc suc of of of ove er- o

6 ces ces ces ces C P P r RA c

K sful sful sful sful S- S- S- Suc T k

PI RR CS PS PS S H H ces CS Er

C RA RA RA p S S s Out ro

con B B B e D U Rat goi r

nec est est est e P P e( ng R

tio abli abli abli c A A %) Ha at

n sh sh sh h C C nd e(

est me me me C al al ove %

abli nt( nt( nt( al l l r )

sh %) HS HS l D D Suc

me DP UP D ro ro ces

nt( A) A) ro p( p( s

%) (%) (%) p( % % Rat

% ) ) e(

) WC

DM

A-

>G
Cl Rat Rat Rat Rat R R R Sof Cel U

us io io io io at at at tHa l L

te of of of of io io io nd Int Bl

r suc suc suc suc of of of ove er- o

6 ces ces ces ces C P P r RA c

K sful sful sful sful S- S- S- Suc T k

PI RR CS PS PS S H H ces CS Er

C RA RA RA p S S s Out ro

con B B B e D U Rat goi r

nec est est est e P P e( ng R

tio abli abli abli c A A %) Ha at

n sh sh sh h C C nd e(

est me me me C al al ove %

abli nt( nt( nt( al l l r )

sh %) HS HS l D D Suc

me DP UP D ro ro ces

nt( A) A) ro p( p( s

%) (%) (%) p( % % Rat

% ) ) e(

) WC

DM

A-

>G
Cl Rat Rat Rat Rat R R R Sof Cel U

us io io io io at at at tHa l L

te of of of of io io io nd Int Bl

r suc suc suc suc of of of ove er- o

6 ces ces ces ces C P P r RA c

K sful sful sful sful S- S- S- Suc T k

PI RR CS PS PS S H H ces CS Er

C RA RA RA p S S s Out ro

con B B B e D U Rat goi r

nec est est est e P P e( ng R

tio abli abli abli c A A %) Ha at

n sh sh sh h C C nd e(

est me me me C al al ove %

abli nt( nt( nt( al l l r )

sh %) HS HS l D D Suc

me DP UP D ro ro ces

nt( A) A) ro p( p( s

%) (%) (%) p( % % Rat

% ) ) e(

) WC

DM

A-

>G
And we will give you the KPI like this: The KPI template：（fill this）

KPI _CL35_CL32_CL7 OSS KPI

. xl s Templ at e. xl sx
★★★Uplink Interference Analysis [RTWP]（Part

13 of the report）

We need the Interference KPI like this:

RNCID Cell ID Exist Maximu Average Minimum

Interference m Cell Cell Freq Cell Frep

Freq RTWP(db RTWP(db

RTWP(db m) m)

m)

36 13301 No -86.2 -106.516 -106.8

RNCID Cell ID Exist Maximu Average Minimum

Interference m Cell Cell Freq Cell Frep

Freq RTWP(db RTWP(db

RTWP(db m) m)

m)

36 14062 No -63.7 - -112

106.3173

36 13151 No -79.2 - -106.6

106.4029

36 14531 No -81.2 - -106.8

106.5058

36 14523 No -85.3 - -106.7

106.5548
And we will give you the KPI like this: The KPI template：（fill this）

KPI _CL35_CL32_CL7 I nt erf erence

. xl s Anal ysi s KPI . xl sx
 Belows are Drop Call List we

need:

List of Dropped Calls

# SITE CSV / Reason Action Taken Problem

ID PSD / Solved

HS

3
4

We can find the call drops in the pictures below:

In this picture we can find which site it droped .

If you want to know the reason,see the signal .