Scribd
Upload
4K views2 pages

Welding Procedure Specification (WPS)

This document provides a welding procedure specification for a gas tungsten arc welding process using ER70S-6 filler metal to weld 6mm thick stainless steel. It involves a multi-pass welding technique using stringer and weaving beads. The root opening is 1.6-3mm, the groove angle is 60 degrees, and the tungsten electrode size is 2-2.4mm. Interpass cleaning is done by brushing and the shielding gas is argon flowing at 10-15 L/min.

Uploaded by

Ramadhan Aditya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
4K views2 pages

Welding Procedure Specification (WPS)

This document provides a welding procedure specification for a gas tungsten arc welding process using ER70S-6 filler metal to weld 6mm thick stainless steel. It involves a multi-pass welding technique using stringer and weaving beads. The root opening is 1.6-3mm, the groove angle is 60 degrees, and the tungsten electrode size is 2-2.4mm. Interpass cleaning is done by brushing and the shielding gas is argon flowing at 10-15 L/min.

Uploaded by

Ramadhan Aditya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
  • Welding Procedure Specification (WPS)

WELDING

Company Name : BALAI BESAR PROCEDURE


LOGAM DAN MESIN SPECIFICATION (WPS)
Welding Process : GTAW / TIG
Supporting :BBLM/AWS D1.1 Identification : BBLM/AWS D1.1
Authorized By : Aditya Ramadhan
Date : 24/08/2020
JOINT DESIGN Type : Manual
Type : Single Weld Position : 1G
Backing Material : N/A
Root Opening : 1.6 – 3 mm ELECTRICAL CHARACTERISTICS
Groove Angle : 60° General Characteristics
Current : DCEN
BASE METALS Other :-
Material Specification : SS 400 Tungsten Electrode (GTAW)
Type or Grade : N/A Size : 2 – 2.4 mm
Thickness : 6 mm Type : EWTh2

FILLER METALS TECHNIQUE


Specification : AWS A 5.18 Stringer or Weave Bead : String and Weaving
ER70S-6 Multhy or Single Pass (preside) : Multhy Pass
SHIELDING Number of Electrodes : Single
Flux :- Gas : Argon (Ar) Inter Pass Cleaning : Brushing
Electo-Flux (Class) Composition : UHF Other :-
Flow Rate (Shielding) : 10 – 15 L/min
Gas Cup Size :3–8

PREHEAT POSTWELD HEAT TREATMENT


Preheat Temperature, Min : -°C Temperature : -°C
Interpass Temperature, Min : -°C Time : - min

WELDING PROCEDURE

Filler Metals Current


Pass or
Type Travel Speed Joint
Weld Process Wire Feed Volts
Class Diameter and Ampers (mm/min) Details
Layers speed
Polarity

 GTA
1. Root W  ER70S-6  2.4 mm  DCEN 70 - 90 -    10 -15 56.17

 GTA See
2. Capping W  ER70S-6  2.4 mm DCEN 80-100 -    10 – 15 74.40 Annex

 GTA
[Link] W  ER70S-6  2.4mm DCEN 90 – 110 -    10 – 15 72.25

Identification : BBLM/AWS D1.1 Authorized By : Aditya Ramadhan

You might also like