Scribd
Upload
129 views3 pages

Method Statement: Sikalite®

The document provides a method statement for applying Sikalite waterproofing mortar admixture. It describes preliminary surface preparation by cleaning and removing loose materials. It then discusses mixing and applying Sikalite at 2% by weight of cement with a water to cement ratio below 0.4 for best results.

Uploaded by

Muthanna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
129 views3 pages

Method Statement: Sikalite®

The document provides a method statement for applying Sikalite waterproofing mortar admixture. It describes preliminary surface preparation by cleaning and removing loose materials. It then discusses mixing and applying Sikalite at 2% by weight of cement with a water to cement ratio below 0.4 for best results.

Uploaded by

Muthanna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

METHOD STATEMENT

Sikalite®
DATE, : 08 / 2015
VERSION NO. 1
SIKA EGYPT
ENG. ASHRAF ELZINY

TECHNICAL DEPATEMENT
1. Scope : Waterproofing Mortar Admixture. (Type Hydrophobic
powder)

Preliminary Works and surface preparation

1.1 Clean out surfaces, using small wire brushes or compressed air to
remove all loose and friable materials, as well as mud and other
impurities.

1.2 AII concrete surfaces must be clean, free from standing, water
and all loosely adhering particles.

2. Execution

- Mixing and Application


Always keep the water/cement ratio to a minimum to enable correct working and
compaction. A W/C of less than 0.4 is advised to give the best results. Sikalite is
added to the cement mixed with sand.
The consumption is 2% by weight of cement.

Method Statement Language/Region/Translation template


Sikalite® TECHNICAL DEPATEMENT
DATE, : 07 / 2015, VERSION NO. 1

2/3
For any further clarification don’t hesitate to contact Sika Egypt Technical Department.

Technical Department

The information, and, in particular, the recommendations relating to the application and end -use of Sika products, are given in
good faith based on Sika's current knowledge and experience of the products when properly stored, handled and applie d under
normal conditions. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in
respect of merchantability or of fitness for a particular purpose, nor any liability arising out of any legal relations hip
whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice
offered. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sa le
and delivery. Users should always refer to the most recent issue of the Product Data Sheet for the product concerned, copies of
which will be supplied on request.

SIKA EGYPT Version given by


TECHNICAL DEPATEMENT Eng. Ashraf Elziny
Phone: 002-01223271730
Fax: 002-03-4244604
Mail: [email protected]

Method Statement Language/Region/Translation template


Sikalite® TECHNICAL DEPATEMENT
DATE, : 07 / 2015, VERSION NO. 1

3/3

You might also like