FIBERLON HD
APP Modified Waterproofing Membrane
with 200 Gsm Polyester Reinforcement
DESCRIPTION Black smooth finish with polyethylene
BITUMAT FIBERLON HD is a uniquely formulated surfaces for covered applications.
prefabricated waterproofing membrane with a Granule surfacing for exposed
special multilayered design for superior pliability, applications.
tensile strength, workability and resistance to
elements. QUALITY CONTROL
In addition to stringent regular tests by BITUMAT
The multilayered design consists of a spunbonded laboratory, our products are tested periodically by
polyester core coated on both sides with APP Independent Laboratories.
modified bitumen. The polyester core gives the
membrane high tensile strength, elongation and STANDARDS
superior lap joint strength. BITUMAT FIBERLON HD complies with the
performance requirements and tolerance levels of
Properly installed, BITUMAT FIBERLON HD forms the listed standards. Some of which modified to
an impervious, permanently flexible waterproof better suit the various climatic conditions around
blanket which accepts normal structural movement the world.
without breaking or cracking.
1. American Society for Testing and Material
USES ASTM D 6222 Type I.
BITUMAT FIBERLON HD membranes are ideal 2. European Union of Technical Agreement
for a wide range of waterproofing applications, (UEAtc) MOAT No. 30-1984.
including roofs, reservoirs, basements, tunnels and 3. Canadian General Standard Board (CGSB
car parks. 37-GP 56M - July 1980).
BITUMAT FIBERLON HD may be utilized in 4. German Standard (DIN 52133).
exposed and covered applications.
INSTALLATION TOOLS REQUIRED:
OUTSTANDING FEATURES Gas torch, Knife, Trowel, measuring tape,
Total impermeability Marking string, Gloves.
Excellent resistance to aging and weathering.
Outstanding bondability and seam integrity. APPLICATION
Stability at high temperatures. BITUMAT FIBERLON HD is installed by torch
Very high resistance to impact & puncture. welding method, loose-laid or fully bonded to the
Simple, single-layer installation reduces substrate. When loose-laid, only overlaps are
labour & errors. bonded together. Peripheres, protrusions and
Variety of finishes for exposed and other flashing details are installed according to
covered applications. specifications.
GENERAL DATA COVERAGE RATE (Approx.)
BITUMAT FIBERLON HD is an APP modified (Rate may vary as per site requirement)
bitumen membrane with a spunbonded nonwoven Flat areas : 1.13 M2/M2 per layer
polyester reinforcement, black finish with a very For 30cm. Girth Flashing: 0.35 M2 / linear M
thin polyethylene foil on both sides or granule Average wastage : 3 - 5%
finish available on request.
TORCHING GUIDELINES
Nominal Weight : 3,4 or 5 kg/M2 The underside of the membrane should be torched
Nominal Thickness : 3,4 or 5 MM just enough to superficially melt the bitumen.
Nominal Roll Size : 1 x 10 Mts. Excessive heating may damage the
reinforcement. Overlaps should be re-heated from
Reinforcement: the t o p and r e -sealed with a trowel to
Robust, isotropic, spunbonded, nonwoven ensure seam integrity.
polyester core, 200 gsm/m2. For details of installation methods and flashing
requirements, consult the relevant BITUMAT
FINISHES Systems Design and Installation Manual.
BITUMAT FIBERLON HD is available in two basic
finishes:
FIBERLON HD
APP Modified Waterproofing Membrane
with 200 Gsm Polyester Reinforcement
MBM24 50-K R-00 00
TECHNICAL DATA
Property Typical Value Test Method
1. Softening Point, °C 155±5 ASTM D 36
2. Penetration, @ 25°C., dmm 18+5 ASTM D 5
3. Cold Flexibility, °C -5 ASTM D 5147, UEAtc
4. Reinforcement 200 Gsm -
5. Tensile Strength, N/5cm @ 23+2°C
Longitudinal * 950 (19 KN/m) ASTM D 5147, UEAtc
Transverse * 750 (14 KN/m)
6. Tensile Strength, N/5cm @ -18+2°C
Longitudinal * 1200 (24 KN/m) -
Transverse * 900 (18 KN/m)
7. Elongation, % @ 23+2°C
Longitudinal ** 50 ASTM D 5147, UEAtc
Transverse ** 55
8. Elongation, % @ -18+2°C
Longitudinal ** 26 ASTM D 5147
Transverse ** 28
9. Tear Resistance, N
Longitudinal 450 ASTM D 5147
Transverse 350 ASTM D 4073
10. Puncture Resistance Static
Indentation Dynamic L4 UEAtc 5.1.9.
Indentation I3 UEAtc 5.1.4.
11. Heat Resistance
115°C., 2 Hrs No flow ASTM D 5147, UEAtc
12. Load Strain Product @ 23+2°C
Longitudinal 47,500 CGSB-37-GP-56M
Transverse 41,200
13. Load Strain Product @ -18+2°C
Longitudinal 31,200 CGSB-37-GP-56M
Transverse 25,200
14. Lap Joint Strength N/5cm
Longitudinal 950 CGSB-37-GP-56M
Transverse 750 UEAtc
15. Water Absorption, % WT
@ 23°C 24 hrs. <0.5 ASTM D 5147
16. Dimensional Stability %
Longitudinal + 0.5 ASTM D 5147
Transverse + 0.5
*In accordance to the UEAtc tolerance, a variation of 20% is expected.
**In accordance to the UEAtc tolerance, a variation of 15% is expected.
The information given in this Technical Data Sheet reflects typical median properties based on laboratory test, and practical
experience; subject to the tolerance levels of UEAtc directives. However, as the product is often used under conditions beyond
our control, we can’t warrant but the product itself.
THIS PUBLICATION AUTOMATICALLY SUPERSEDES ALL PREVIOUS PUBLICATIONS RELATING TO THIS PRODUCT.
