Scribd
Upload
141 views1 page

DATASHEET

The document describes a laboratory stirrer for simple stirring tasks of up to 10 liters of water. It has an adjustable speed range of 40-1200 rpm and is suitable for schools, universities, and inspection laboratories. The stirrer has a slim casing, quiet operation, safety circuit, and non-locking overload capabilities.

Uploaded by

Celeynes RT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
141 views1 page

DATASHEET

The document describes a laboratory stirrer for simple stirring tasks of up to 10 liters of water. It has an adjustable speed range of 40-1200 rpm and is suitable for schools, universities, and inspection laboratories. The stirrer has a slim casing, quiet operation, safety circuit, and non-locking overload capabilities.

Uploaded by

Celeynes RT
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Data Sheet

Mixing / Overhead Stirrers

RW 16 basic
Technical Data
Stirring quantity max. (H2O) [l] 10
Laboratory stirrer for simple stirring tasks of up to 10 liters (H2O) with ideal speed
range from 40 - 1,200 rpm. Especially suitable for schools, universities and inspection Motor rating input [W] 75
laboratories Motor rating output [W] 55
- Infinitely adjustable without gear shifting Speed display scale
- Slim casing Speed range [1/min] 40 - 1200
- Quiet operation Viscosity max. [mPas] 10000
- Safety circuit Output max. at stirring shaft [W] 53
- Non-locking, overload capabilities
Permissible ON time [%] 100
Accessories: R 1342 Propeller stirrer, 4-bladed, R 1827 Plate stand, R 1382 Propeller Torque max. at stirring shaft [Ncm] 40
stirrer, 3-bladed, R 1381 Propeller stirrer, 3-bladed, R 1330 Anchor stirrer, R 1311 Torque max. at stirring shaft at 60 1/min (overload) [Ncm] 50
Turbine stirrer, R 1312 Turbine stirrer, FK 1 Flexible coupling, R 1389 (PTFE-coated) Torque max. at stirring shaft at 100 1/min [Ncm] 48
Propeller stirrer, 3-bladed, R 301 Stirring shaft protection, R 182 Boss head clamp, R Torque max. at stirring shaft at 1.000 1/min [Ncm] 34
1303 Dissolver stirrer, RH 3 Strap clamp, R 1825 Plate stand, R 1826 Plate stand, R Speed control stepless
1352 Centrifugal stirrer Stirring element fastening chuck
Chuck range min. diameter [mm] 0.5
Chuck range max. diameter [mm] 10
Hollow shaft, inner diameter [mm] 11
Hollow shaft (push-through ¿ when stopped) yes
Fastening on stand extension arm
Extension arm diameter [mm] 13
Extension arm length [mm] 160
Torque display no
Nominal torque [Nm] 0.4
Dimensions (W x H x D) [mm] 80 x 222 x 190
Weight [kg] 2.8
Permissible ambient temperature [°C] 5 - 40
Permissible relative moisture [%] 80
Protection class according to DIN EN 60529 IP 42
RS 232 interface no
Analog output no
Voltage [V] 230 / 115 / 100
Frequency [Hz] 50/60
Power input [W] 75
Ident. No. 2572100

© IKA® Werke Staufen/Germany 2010 [Link]


Subject to technical changes

You might also like