TECHNICAL SPECIFICATION
FOR
BARGE, M.S PIPE & FLOAT
Technical Specification of 75' x 30' x 6' Size Barge
Name of Site - Pyaw Ywar
Quantity - 1Unit
No. Description Requirement
1 Size 75' x 30' x 6'
IACS (International Association
2 Type
of Classification Societies)
3 Own Weight of Pontoon 70 Tons
4 Draught Without Load About 1.2ft
5 Skin Plate thickness
(a) Floor 8 mm
(b) Side 8 mm
(c) Bottom 8 mm
6 No. of Water-Tight Compartment 10 Nos
7 Thickness of Water-Tight Bulkhead 6 mm
8 SKELETON FRAME
BOTTOM FLOOR
( )K
(a) Keell size
i & Quantity
Q i 8" x 4" II-Beam
B (2 N
Nos))
(b) Transverse Beam Size & Quantity 4" x 4" x 8mm Angle Iron (24 Nos)
(c) Longitudinal Beam Size & Quantity 4" x 4" x 8mm Angle Iron (8 Nos)
(d) Distance Between Keelsons 3.5 ft
DECK FLOOR
(e) Deck Girder Size & Quantity 8" x 4" I-Beam (2 Nos)
(f) Transverse Beam Size & Quanity 4" x 4" x 8mm Angle Iron (24 Nos)
(g) Longitudinal Beam Size & Quantity 4" x 4" x 8mm Angle Iron (8 Nos)
(h) Distance Between Deck Girders 3.5 ft
(i) Distance Between Stiffeners 2.5 ft & 2.625 ft
(j) No of Piller & Size 4" x 4" x 8mm Angle Iron (253 Nos)
(k) No of Gussets & Size 924 Nos
(l) Wave Cover Height & Thickness 1½’ straight & ½’ Angle 4 mm
128'Long 2"x2" A.I Post,4mm M.S Cover,
(m) Verandah
2"x1" Hollow Hand Rail
9 DECK HOUSE
(a) Size 75' x 30' x 15'
(b) Roofing Material Aluzinc
(c) Post Size & Quantity 4" x 2" U Channel(12 Nos),3" x 3" Angle(12 Nos)
4 Nos Tension Cable with Turn-Buckle
No. Description Requirement
10 CONTROL ROOM
(a)Size 10’x20’x12’
(b)Post size & quantity 3”x3” Angle(3)NO, 2”x2”Angle (9Nos)
(c)Door (5’x10’)Slide door (1No)
(d)Cover Material Aluzinc
11 ACCESSORIES
(a) No of Anchors & Weight Chain & Anchor About 500Kg, 4'(4)sets
(b) No of Winches with Chain 4 Nos
(c) Steel Cable, Diameter & Length ¾" Dia; 1000' Length (Total)
(d) Sets of Bollard 4 Sets
(e) Dewatering Pump, No, & Type 0.75 HP Submersible Pump, 1 No
(f) Manhole in each compartment 20" x 20" with cover cap
(g) Chain Block with detachable Gantary,
5 Tons, 1 No
Size & Quantity
(h) David Crane (Movable Rotary Crane) 1 No
(i) Float-Bridge (40' x 3') 1 No
(j) Ladder in each compartment 2ft Wide , 2"x2" Angle Iron Frame and Step
12 Floor Matting Timber Floor & Rubber Mat (1" Thickness)
13 Painting Red Oxide 1 Coat & Enamel Paint 2 Coats.
14 Testing & Commissioning After The following types of tests are to be provided;
Assembling of the Pumps (1) Hydro-Static Testing for Barge
(2) Anchor & Hand Winch Testing
(3) Starter Operation with Dummy Load Testing
15 Delivery Period For One Unit 6 Month
16 Warrenty Period 1 Year
Technical Specification for ø 30" x 10' MS Pipe (Single End)
NAME OF SITE : Pyaw Ywar
Quantity : 66 Nos
Sr Description Unit Require Specification
1 Diameter of Pipe, Outer In 30
2 Diameter of Pipe, Inner In 29.5
3 Length of Pipe ft 10
4 Thickness of Pipe mm 6
5 Material Mild Steel
6 Type Welded
7 Flange no 1
8 Diameter of Flange, Outer in 37
9 Diameter of Flange, Inner in 30
10 Nos Of Bolt no 20
11 Diameter of Bolt in 1.25
12 Flange Pitch Diameter in 34
13 Flange Thickness in 1
Anticorrosive Red
14 Painting
Oxide 3 Coats
Technical Specification of 8' to 10' Vary x 4' x 2' Size FLOAT
Name of Site - Pyaw Ywar
Quantity - 10 Unit
No. Description Requirement
1 Size 8' to 10ft Vary x 4' x 2'
2 Skin Plate thickness
(a) Floor 2.5 mm
(b) Side 2.5 mm
(c) Bottom 2.5 mm
3 SKELETON FRAME
TOP & BOTTOM FRAME
(a) Transverse Beam Size & Quantity 1.25" x 1.25" x 3/16" Angle Iron (3 Nos)
(b) Longitudinal Beam Size & Quantity 1.25" x 1.25" x 3/16" Angle Iron (3 Nos)
(c) No of Piller & Size 1.25" x 1.25" x 3/16" Angle Iron (8 Nos)
(d) Saddle 5"x2"x1/4" (2 Nos)
4 Painting Red Oxide 1 Coat & Enamel Paint 2 Coats.
