LH59F3211SCTAA

Preliminary Data Sheet 4M (1M × 32) Flash Memory Module

FEATURES
• JEDEC standard pin out in a 80-pin single-in-line OE
memory module package (SIMM) CE0 BANK 0
• Built with LH28F008SC, 40-pin TSOP flash memory A0 - A19 U4
devices
• High performance CMOS silicon gate process
• Low power dissipation BYTE 0 DQ0 - DQ7
• All inputs and outputs are fully TTL and CMOS WE0
compatible
• Power supplies: U3
– 5 V ±10% Normal Operation
– 5 V or 12 V ±10% Programming
• 90 ns and 120 ns access time BYTE 1 DQ8 - DQ15
WE1
DESCRIPTION
The LH59F3211SCTAA is a 4M Flash Memory mod- U1
ule organized as 1M by 32-bits, consisting of four 1M ×
8 flash memory devices.

BYTE 2 DQ16 - DQ23

PIN DESCRIPTION
WE2
SYMBOL DESCRIPTION
A0 – A19 Addresses U2
DQ0 – DQ31 Data Inputs/Outputs
CE0 Chip Enable
WE0 – WE3 Write Enable BYTE 3 DQ24 - DQ31

OE Output Enable WE3

VCC Power Supply MBU2-2

VPP Erase/Programming Power Supply Figure 1. Block Diagram

VSS Ground
PD Presence Detect
RFU Reserved for Future Use

PRESENCE DETECT
Flash SIMM PD1 PD2 PD3 PD4 PD5 PD6 PD7
4M 1M × 32 NC VSS NC VSS
90 ns NC NC VSS
Speed
120 ns VSS NC VSS

Preliminary Data Sheet 1

LH59F3211SCTAA 4M (1M × 32) Flash Memory Module

PIN ASSIGNMENT
PIN # DESCRIPTION PIN # DESCRIPTION
1 VSS 41 A11
2 VCC 42 A10
3 VPP 43 A9
4 OE 44 A8
5 WE0 45 A7
6 WE1 46 A6
7 RFU 47 A5
8 DQ16 48 A4
9 DQ17 49 A3
10 DQ18 50 A2
11 DQ19 51 A1
12 DQ20 52 A0
13 DQ21 53 WE3
14 DQ22 54 VSS
15 DQ23 55 DQ15
16 DQ24 56 DQ14
17 DQ25 57 DQ13
18 DQ26 58 DQ12
19 DQ27 59 DQ11
20 DQ28 60 DQ10
21 RFU 61 DQ9
22 RFU 62 DQ8
23 RFU 63 DQ7
24 CE0 64 DQ6
25 VSS 65 DQ5
26 DQ29 66 DQ4
27 DQ30 67 DQ3
28 DQ31 68 DQ2
29 WE2 69 DQ1
30 RFU 70 DQ0
31 RFU 71 VPP
32 RFU 72 VCC
33 A19 73 PD1
34 A18 74 PD2
35 A17 75 PD3
36 A16 76 PD4
37 A15 77 PD5
38 A14 78 PD6
39 A13 79 PD7
40 A12 80 VSS

2 Preliminary Data Sheet

4M (1M × 32) Flash Memory Module LH59F3211SCTAA

4.650 ±0.005
0.133 ±0.005

4.384 ±0.005

2.192 ±0.005 0.160 MAX.

A
0.850 ±0.005

R 0.062 ±0.004 2_φ 0.125 ±0.002

R 0.062 ±0.004
0.250 ±0.005

0.400 ±0.005
SEE

0.225 MIN.
0.125 MIN.
DETAIL A

(back)
(front)
1 80

1.950 REF.
0.250 ±0.002 0.047 ±0.003

4.150 ±0.002

0.080 ±0.005
0.041 ±0.002
0.250 ±0.005
0.050
DETAIL A
0.010 MAX.
0.100 MIN.

0.000 MIN.

NOTES:
BOARD EDGE
1. Units are in inches
2. Scale: None MBU2-1

Figure 2. LH59F3211SCTAA Outline Drawing

ORDERING INFORMATION
PART NUMBER VCC VPP ACCESS TIME
LH59F3211SCTAA-90 5V 5 V or 12 V 90 ns
LH59F3211SCTAA-12 5V 5 V or 12 V 120 ns

Preliminary Data Sheet 3

LH59F3211SCTAA 4M (1M × 32) Flash Memory Module

LIFE SUPPORT POLICY

SHARP components should not be used in medical devices with life support functions or in safety equipment (or similiar applications where
component failure would result in loss of life or physical harm) without the written approval of an officer of the SHARP Corporation.

LIMITED WARRANTY
SHARP warrants to its Customer that the Products will be free from defects in material and workmanship under normal use and service for a
period of one year from the date of invoice. Customer's exclusive remedy for breach of this warranty is that SHARP will either (i) repair or
replace, at its option, any Product which fails during the warranty period because of such defect (if Customer promptly reported the failure to
SHARP in writing) or, (ii) if SHARP is unable to repair or replace, refund the purchase price of the Product upon its return to SHARP. This
warranty does not apply to any Product which has been subjected to misuse, abnormal service or handling, or which has been altered or
modified in design or construction, or which has been serviced or repaired by anyone other than Sharp. The warranties set forth herein are in
lieu of, and exclusive of, all other warranties, express or implied. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE AND FITNESS FOR A PARTICULAR PURPOSE, ARE SPECIFICALLY
EXCLUDED. In no event will Sharp be liable, or in any way responsible, for any incidental or consequential economic or property damage.

The above warranty is also extended to Customers of Sharp authorized distributors with the following exception: reports of failures of Products
during the warranty period and return of Products that were purchased from an authorized distributor must be made through the distributor.
In case Sharp is unable to repair or replace such Products, refunds will be issued to the distributor in the amount of distributor cost.

SHARP reserves the right to make changes in specifications at any time and without notice. SHARP does not assume any responsibility
for the use of any circuitry described; no circuit patent licenses are implied.

NORTH AMERICA EUROPE ASIA

SHARP Microelectronics SHARP Electronics (Europe) GmbH SHARP Corporation
of the Americas Microelectronics Division Integrated Circuits Group
5700 NW Pacific Rim Blvd., M/S 20 Sonninstraße 3 2613-1 Ichinomoto-Cho
Camas, WA 98607, U.S.A. 20097 Hamburg, Germany Tenri-City, Nara, 632, Japan
Phone: (360) 834-2500 Phone: (49) 40 2376-2286 Phone: (07436) 5-1321
Telex: 49608472 (SHARPCAM) Telex: 2161867 (HEEG D) Telex: LABOMETA-B J63428
Facsimile: (360) 834-8903 Facsimile: (49) 40 2376-2232 Facsimile: (07436) 5-1532
http://www.sharpsma.com

©1998 by SHARP Corporation Reference Code SMT98110