LDX-9013DS-VTM
2-port sector antenna, 2x 790–960 MHz, 90° HPBW, RET compatible
Smallest profile, high gain, 90°, DualPol® antenna with significant wind load reduction
Rugged, reliable design with excellent passive intermodulation suppression
General Specifications
Antenna Type Sector
Band Single band
Color Light gray
Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note Outdoor usage
Radome Material Fiberglass, UV resistant
Radiator Material Aluminum
RF Connector Interface 7-16 DIN Female
RF Connector Location Bottom
RF Connector Quantity, low band 2
RF Connector Quantity, total 2
Dimensions
Width 225 mm | 8.858 in
Depth 164 mm | 6.457 in
Length 1831 mm | 72.087 in
Net Weight, without mounting kit 12 kg | 26.455 lb
Electrical Specifications
Impedance 50 ohm
Operating Frequency Band 790 – 960 MHz
Polarization ±45°
Electrical Specifications
Page 1 of 3
©2021 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See [Link] for the
most current information. Revised: May 24, 2021
LDX-9013DS-VTM
Frequency Band, MHz 790–896 870–960
Gain, dBi 14.7 15.1
Beamwidth, Horizontal, degrees 89 89
Beamwidth, Vertical, degrees 11.2 10.5
Beam Tilt, degrees 0–10 0–10
USLS (First Lobe), dB 14 13
Front-to-Back Ratio at 180°, dB 25 27
CPR at Boresight, dB 20 19
CPR at Sector, dB 13 13
Isolation, Cross Polarization, dB 30 30
VSWR | Return loss, dB 1.5 | 14.0 1.4 | 15.6
PIM, 3rd Order, 2 x 20 W, dBc -150 -150
Input Power per Port, maximum, watts 300 300
Electrical Specifications, BASTA
Frequency Band, MHz 790–896 870–960
Gain by all Beam Tilts, average, dBi 14.5 14.7
Gain by all Beam Tilts Tolerance, dB ±0.2 ±0.4
Gain by Beam Tilt, average, dBi 0 ° | 14.5 0 ° | 14.7
5 ° | 14.5 5 ° | 14.8
10 ° | 14.3 10 ° | 14.5
Beamwidth, Horizontal Tolerance, degrees ±1.6 ±1.7
Beamwidth, Vertical Tolerance, degrees ±0.7 ±0.6
USLS, beampeak to 20° above beampeak, dB 14 15
Front-to-Back Total Power at 180° ± 30°, dB 20 21
CPR at Boresight, dB 21 20
CPR at Sector, dB 13 13
Mechanical Specifications
Wind Loading at Velocity, frontal 392.0 N @ 150 km/h | 88.3 lbf @ 150 km/h
Wind Loading at Velocity, lateral 367.0 N @ 150 km/h | 82.5 lbf @ 150 km/h
Wind Loading at Velocity, rear 155.6 lbf @ 150 km/h | 692.0 N @ 150 km/h
Wind Speed, maximum 241 km/h | 149.75 mph
Packaging and Weights
Width, packed 364 mm | 14.331 in
299 mm | 11.772 in Page 2 of 3
©2021 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See [Link] for the
most current information. Revised: May 24, 2021
LDX-9013DS-VTM
Depth, packed 299 mm | 11.772 in
Length, packed 2151 mm | 84.685 in
Weight, gross 24.7 kg | 54.454 lb
Regulatory Compliance/Certifications
Agency Classification
CE Compliant with the relevant CE product directives
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant
Included Products
600899A-2 – Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one
scissor top bracket set and one bottom bracket set.
* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance
Page 3 of 3
©2021 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,
respectively, of CommScope. All specifications are subject to change without notice. See [Link] for the
most current information. Revised: May 24, 2021
