Scribd
Upload
62 views2 pages

Concrete Column Design

This document provides the design calculations for a concrete column that is part of the Xentro Mall Tabuk project. The column has dimensions of 60cm width and 60cm height with 12 longitudinal reinforcement bars and ties spaced every 20cm. The column is 3.66m in length and considered short and stable. It is designed to support an axial load of 2452.1kN and moments of -21.2kN-m and 41.5kN-m from gravity, and 324.3kN-m and 53.5kN-m from lateral loads. The material properties and interaction diagram are presented, showing the column's capacity is 2452.1kN for axial load and 653

Uploaded by

heherson juan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views2 pages

Concrete Column Design

This document provides the design calculations for a concrete column that is part of the Xentro Mall Tabuk project. The column has dimensions of 60cm width and 60cm height with 12 longitudinal reinforcement bars and ties spaced every 20cm. The column is 3.66m in length and considered short and stable. It is designed to support an axial load of 2452.1kN and moments of -21.2kN-m and 41.5kN-m from gravity, and 324.3kN-m and 53.5kN-m from lateral loads. The material properties and interaction diagram are presented, showing the column's capacity is 2452.1kN for axial load and 653

Uploaded by

heherson juan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Your Company Name Project: Xentro Mall Tabuk Page # ___

Engineer: 11/07/2021
Descrip: C-1
ASDIP Concrete 4.4.8 CONCRETE COLUMN DESIGN [Link]

GEOMETRY SLENDERNESS
Width .... 60.0 cm , Height ... 60.0 cm Clear Member Length Lu ....... 3.66 m
Use 12-D25 Longitudinal Bars , ρ = 0.016 OK Effective Length Kx-factor ..... 1.00
Use Ties D12 @ 20.0 cm d' = 6.4 cm OK Effective Length Ky-factor ..... 1.00
Concrete Clear Cover ............. 4.0 cm Lateral Stability .......... Sway Column
Slenderness Ratio = 21 < Limit = 22, Short
FACTORED LOADS (2nd-Order Analysis)
Axial Force Pu ................. 2452.1 KN MATERIALS
Bottom Top Concrete Strength f'c .......... 27.6 MPa
Mux due to Gravity .. -21.2 41.5 KN-m Rebar Steel Strength fy ...... 413.7 MPa
Mux due to Lateral ... 324.3 53.5 KN-m Compression Strain Limit ..... 0.003
Story Axial Force ΣPu ...... 97452 KN
Story Shear Force Vus ..... 1076 KN

INTERACTION DIAGRAM
k= Steel Fs Steel Ms Conc Fc Conc Mc Pn Mn
Condition (KN) (KN-m) (KN) (KN-m) (KN) (KN-m)
c/d
Pure Compression Inf. 2304.1 0.0 8140.5 0.0 10444.6 0.0
Max. Usable Axial 1.11 1412.8 167.7 6942.9 350.1 8355.7 517.8
Zero Steel Stress 1.00 1242.5 193.6 6233.7 473.2 7476.2 666.9
Steel Stress = 0.5 fy 0.74 624.0 292.9 4635.1 618.2 5259.2 911.1
Balanced Condition 0.59 -2.0 393.2 3689.4 617.5 3687.5 1010.7
Steel Strain = 0.005 0.38 -527.5 395.5 2337.0 504.8 1809.5 900.3
Pure Bending 0.20 0.0 287.7 0.0 311.6 0.0 599.3
Pure Tension 0.00 2437.4 0.0 0.0 0.0 2437.4 0.0

COLUMN STRENGTH
Pu Mu k= Steel Fs Steel Ms Conc Fc Conc Mc ϕ ϕPn ϕMn Mu/ϕMn
Comb (KN) (KN-m) (KN) (KN-m) (KN) (KN-m) Factor (KN) (KN-m) Ratio
c/d
User 2452.1 366.1 0.60 36.7 387.0 3735.7 619.1 0.65 2452.1 653.9 0.56 OK

1 of 2
Your Company Name Project: Xentro Mall Tabuk Page # ___
Engineer: 11/07/2021
Descrip: C-1
ASDIP Concrete 4.4.8 CONCRETE COLUMN DESIGN [Link]

2 of 2

You might also like