UNISONIC TECHNOLOGIES CO.

, LTD
2N60L Power MOSFET

2A, 600V N-CHANNEL

POWER MOSFET

 DESCRIPTION
The UTC 2N60L is a high voltage MOSFET and is
designed to have better characteristics, such as fast
switching time, low gate charge, low on-state
resistance and have a high rugged avalanche
characteristics. This power MOSFET is usually used at
high speed switching applications in power supplies,
PWM motor controls, high efficient DC to DC
converters and bridge circuits.

 FEATURES
* RDS(ON) < 5Ω @ VGS = 10V, ID =1A
* Fast switching capability
* Avalanche energy specified
* Improved dv/dt capability, high ruggedness

 SYMBOL

www.unisonic.com.tw 1 of 7
Copyright © 2014 Unisonic Technologies Co., Ltd QW-R502-472.M
2N60L Power MOSFET

 ORDERING INFORMATION
Ordering Number Pin Assignment
Package Packing
Lead Free Halogen Free 1 2 3
2N60LL-TA3-T 2N60LG-TA3-T TO-220 G D S Tube
2N60LL-TF1-T 2N60LG-TF1-T TO-220F1 G D S Tube
2N60LL-TF2-T 2N60LG-TF2-T TO-220F2 G D S Tube
2N60LL-TF3-T 2N60LG-TF3-T TO-220F G D S Tube
2N60LL-TF3T-T 2N60LG-TF3T-T TO-220F3 G D S Tube
2N60LL-TM3-T 2N60LG-TM3-T TO-251 G D S Tube
2N60LL-TMA-T 2N60LG-TMA-T TO-251L G D S Tube
2N60LL-TMS-T 2N60LG-TMS-T TO-251S G D S Tube
2N60LL-TMS2-T 2N60LG-TMS2-T TO-251S2 G D S Tube
2N60LL-TMS4-T 2N60LG-TMS4-T TO-251S4 G D S Tube
2N60LL-TN3-R 2N60LG-TN3-R TO-252 G D S Tape Reel
2N60LL-TND-R 2N60LG-TND-R TO-252D G D S Tape Reel
2N60LL-T2Q-T 2N60LG-T2Q-T TO-262 G D S Tube
2N60LL -T60-K 2N60LG-T60-K TO-126 G D S Bulk
Note: Pin Assignment: G: Gate D: Drain S: Source

 MARKING
PACKAGE MARKING
TO-220
TO-251S
TO-220F
TO-251S2
TO-220F1
TO-251S4
TO-220F2
TO-252
TO-220F3
TO-252D
TO-251
TO-262
TO-251L

TO-126

UNISONIC TECHNOLOGIES CO., LTD 2 of 7

www.unisonic.com.tw QW-R502-472.M
2N60L Power MOSFET

 ABSOLUTE MAXIMUM RATINGS (TC = 25°С, unless otherwise specified)

PARAMETER SYMBOL RATINGS UNIT
Drain-Source Voltage VDSS 600 V
Gate-Source Voltage VGSS ±30 V
Avalanche Current (Note 2) IAR 2.0 A
Continuous ID 2.0 A
Drain Current
Pulsed (Note 2) IDM 8.0 A
Single Pulsed (Note 3) EAS 140 mJ
Avalanche Energy
Repetitive (Note 2) EAR 4.5 mJ
Peak Diode Recovery dv/dt (Note 4) dv/dt 4.5 V/ns
TO-220/TO-262 54 W
TO-220F/TO-220F1
23 W
TO-220F3
TO-220F2 25 W
Power Dissipation TO-251/TO-251L PD
TO-251S/TO-251S2
44 W
TO-251S4/TO-252
TO-252D
TO-126 12.5 W
Junction Temperature TJ +150 °С
Ambient Operating Temperature TOPR -55 ~ +150 °С
Storage Temperature TSTG -55 ~ +150 °С
Notes: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Repetitive Rating : Pulse width limited by TJ
3. L=64mH, IAS=2.0A, VDD=50V, RG=25 Ω, Starting TJ = 25°C
4. ISD≤2.4A, di/dt≤200A/μs, VDD ≤ BVDSS, Starting TJ = 25°C
 THERMAL DATA
PARAMETER PACKAGE SYMBOL RATINGS UNIT
TO-220/TO-220F
TO-220F1/TO-220F2 62.5 °С/W
TO-220F3/TO-262
TO-251/TO-251L
Junction to Ambient θJA
TO-251S/TO-251S2
100 °С/W
TO-251S4/TO-252
TO-252D
TO-126 132 °С/W
TO-220/TO-262 2.32 °С/W
TO-220F/TO-220F1
5.5 °С/W
TO-220F3
TO-220F2 5 °С/W
Junction to Case TO-251/TO-251L θJC
TO-251S/TO-251S2
2.87 °С/W
TO-251S4/TO-252
TO-252D
TO-126 10 °С/W

UNISONIC TECHNOLOGIES CO., LTD 3 of 7

www.unisonic.com.tw QW-R502-472.M
2N60L Power MOSFET

 ELECTRICAL CHARACTERISTICS (TJ =25°С, unless otherwise specified)

PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT
OFF CHARACTERISTICS
Drain-Source Breakdown Voltage BVDSS VGS = 0V, ID = 250μA 600 V
Drain-Source Leakage Current IDSS VDS = 600V, VGS = 0V 10 μA
Forward VGS = 30V, VDS = 0V 100 nA
Gate-Source Leakage Current IGSS
Reverse VGS = -30V, VDS = 0V -100 nA
Breakdown Voltage Temperature Coefficient △BVDSS/△TJ ID=250μA, Referenced to 25°C 0.4 V/°С
ON CHARACTERISTICS
Gate Threshold Voltage VGS(TH) VDS = VGS, ID = 250μA 2.0 4.0 V
Static Drain-Source On-State Resistance RDS(ON) VGS = 10V, ID =1A 4.2 5.0 Ω
DYNAMIC CHARACTERISTICS
Input Capacitance CISS 300 350 pF
VDS =25V, VGS =0V,
Output Capacitance COSS 30 50 pF
f =1MHz
Reverse Transfer Capacitance CRSS 7 10 pF
SWITCHING CHARACTERISTICS
Turn-On Delay Time tD (ON) 30 60 ns
Turn-On Rise Time tR VDD =300V, ID =2.4A, RG=25Ω 25 60 ns
Turn-Off Delay Time tD(OFF) (Note 1, 2) 70 90 ns
Turn-Off Fall Time tF 30 60 ns
Total Gate Charge QG 30 40 nC
VDS=480V, VGS=10V, ID=2.4A
Gate-Source Charge QGS 8 nC
(Note 1, 2)
Gate-Drain Charge QGD 10 nC
DRAIN-SOURCE DIODE CHARACTERISTICS
Drain-Source Diode Forward Voltage VSD VGS = 0 V, ISD = 2.0 A 1.4 V
Continuous Drain-Source Current ISD 2.0 A
Pulsed Drain-Source Current ISM 8.0 A
Reverse Recovery Time tRR VGS = 0 V, ISD = 2.4A, 180 ns
Reverse Recovery Charge QRR di/dt = 100 A/μs (Note1) 0.72 μC
Notes: 1. Pulse Test: Pulse width ≤ 300μs, Duty cycle≤2%.
2. Essentially independent of operating temperature.

UNISONIC TECHNOLOGIES CO., LTD 4 of 7

www.unisonic.com.tw QW-R502-472.M
2N60L Power MOSFET

 TEST CIRCUITS AND WAVEFORMS

D.U.T. +

VDS

- L

RG
Driver VDD
* dv/dt controlled by RG
Same Type * ISD controlled by pulse period
VGS as D.U.T. * D.U.T.-Device Under Test

Peak Diode Recovery dv/dt Test Circuit

VGS Period P. W.
D=
(Driver) P.W. Period

VGS= 10V

IFM, Body Diode Forward Current

ISD
(D.U.T.)
di/dt

IRM

Body Diode Reverse Current

Body Diode Recovery dv/dt

VDS
(D.U.T.) VDD

Body Diode Forward Voltage Drop

Peak Diode Recovery dv/dt Waveforms

UNISONIC TECHNOLOGIES CO., LTD 5 of 7

www.unisonic.com.tw QW-R502-472.M
2N60L Power MOSFET

 TEST CIRCUITS AND WAVEFORMS (Cont.)

VDS
90%

10%
VGS
tD(ON) tD(OFF)
tR tF

Switching Test Circuit Switching Waveforms

VGS

QG
10V

QGS QGD

Charge

Gate Charge Test Circuit Gate Charge Waveform

BVDSS
IAS

ID(t)
VDS(t)
VDD

tp Time

Unclamped Inductive Switching Test Circuit Unclamped Inductive Switching Waveforms

UNISONIC TECHNOLOGIES CO., LTD 6 of 7

www.unisonic.com.tw QW-R502-472.M
2N60L Power MOSFET

 TYPICAL CHARACTERISTICS
Drain Current vs. Drain-Source
Drain Current vs. Gate Threshold Voltage
Breakdown Voltage
300 300

250 250
Drain Current, ID (µA)

Drain Current, ID (µA)

200 200

150 150

100 100

50 50

0 0
0 200 400 600 800 100 0 1 2 3 4 5
Drain-Source Breakdown Voltage, BVDSS (V) Gate Threshold Voltage, VTH (V)

Drain-Source On-State Resistance Coutinuous Drain-Soarce Current vs.

Characteristics Source to Drain Voltage
Coutinuous Drain-Soarce Current, ISD (A)

1.2 2.4

1.0 2.0
Drain Current, ID (A)

0.8 1.6

0.6 1.2

0.4 VGS=10V, ID=1A 0.8

0.2 0.4

0 0
0 2 4 6 8 10 0 0.3 0.6 0.9 1.2 1.5
Drain to Source Voltage, VDS (V) Source to Drain Voltage, VSD (V)

UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.

UNISONIC TECHNOLOGIES CO., LTD 7 of 7

www.unisonic.com.tw QW-R502-472.M