PANEL INSPECTION REPORT

PREPARED BY Mr. ABHISHEK SHARMA

END USER MONDELEZ INDIA FOODS LTD.
PROJECT ML-4 PDB SRICITY
DATE OF INSPECTION [Link].2a0
ITEM UTILITY PDB.2
[Link]. 4581279624

NO, OF PANELS 01

FITTING & ASSEMBLY STAGf, RXMARJ<S

Basic Construction
Protection .lP 42
(a) Overall Size: Height: 2100 mm.
Width: 2300 mm.
Depth:600 mm.
(b) Painting :
Inside: TEXTURE FINISH ELECTRO STATIC PArNT (RAL -5015)
Outside: TEXTURE FINISH ELECTRO STATIC PArNT (RAL -5015)

(c) Tightening ofnuts & Bolls :

(l) Mounting Channels & Plates OK COMPT,F,TF,T)

(2) Gland Plates OK COMPLETED

(3) Doors / Frame OK COMPLETED

(4) Lifting Hooks OK COMPLETED
(5) Cable Trays / Terminal OK COMPLETED
Channels
(6) Instrument Mounting Chann€ls OK COMPLETED
(d) Assembling & Fitting
(1) Rubber Gasket on Base Frame & ry COMPLETED
Door Frame
(2) Gaskets on doors. OK COMPLETED
(3) Tag Plates & Iogos. OK COMPLETED
(4) Hinges & Locks. OK COMPLETED
(5) Fans OK COMPLETED
(6) Panel hardware as per BOM OK COMPLETED
 FITTINGS & ASSEMBLY RXMARKS
NLDCTIUCAI] \\IInINC
(a) General l,ay out ofwiring. OK COMPLETED
(b) Wire Size as per drawing : OK COMPLETED
(1) Control Wiring. OK COMPLETED
(2) Power Wiring. OK COMPLETED
(c) Fenuling as per drawing. OK COMPLETED
(d) Terminal mounting & numbering. OK COMPLETED
(e) Drcssing ofwires. OK COMPLETED
(f) Earthing :

(l) Earth Bus Bar OK COMPLETED

D. TESTING
(a) Continuity Testing :

(i) Conhol Wiring. OK COMPLETED

(ii) Power Wiring. OK COMPLETED
(b) WorkmanshiD of wirine. OK COMPLETED
(c) Switchqear OK COMPLETED

(C) lR TEST : RY - >I00MOHMS, YB - >100 M OHMS, RB - >100 MOHMS,RN - >100 MOHMS,

YN- >1OO MOHMS,BN - >IOOM OHMS, RE- >IOO MOHMS,YE- >IOO MOHMS,
BE. >IOO MOHMS
(D) HV TEST : PH N E 2.5KV FOR I MlN, RESULT : WITHSTOOD
 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/10 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments
1.0 FRAME: 400WX2000HX600D
1.1 Frame profiles parallel, deflection Max 2mm OK NIL
1.2 Welds solid and regular OK NIL
1.3 Welds without porous spots OK NIL
1.4 Dimension of Enclosure OK NIL
2.0 REAR PANEL
2.1 Rear panel support fixed and adjusted OK NIL
2.2 Seal complete and undamaged OK NIL

3.0 DOOR / DOOR'S VCA Door

Lock easy to handle.
3.1 Lock Closing Direction - OK NIL
(TS : Counterclockwise / PS : clockwise)
3.2 Seal complete and undamaged OK NIL
Seal piece from double door O.K. and
3.3 NA NA
undamaged
3.4 Spot-welding dents not visible OK NIL
Door assembled rectangular and adjusted
3.5 (Height difference between LH & RH - Max NA NA
3mm
4.0 MOUNTING PLATE
4.1 Straight and correct fitted NA NA
4.2 All screw joints solid tightened NA NA

5.0 Bottom Cover with Gland plate's Bottom Plain Cover

5.1 Screws solid tightened OK NIL

5.2 All parts correct located OK NIL
Top Cover with Cutout & Cover Plate of
6.0 TOP COVER
3MM Thick
Adjusted rectangular and Lifting eyebolds
6.1 OK NIL
sufficient fixed
6.2 Seal complete and undamaged OK NIL

7.0 GROUND CONDUCTOR CONNECTION

Bolts for ground conductor connection
7.1 OK NIL
present and free of coating
8.0 ACCESSORIES As per BOM
Descriptions correct and accessories
8.1 OK NIL
complete existing
9.0 SIDE PANEL LHS only
9.1 Side panel holder fixed and adjusted OK NIL
9.2 Seal complete and undamaged OK NIL
10.0 PACKAGE
Printing clear, complete and according to
10.1 OK NIL
contents
Package and stacking correct and
10.2 OK NIL
undamaged
Spl. Cutouts (RIPL / Customer dwg.
11.0
Number )
11.1 Drawing Number OK NIL

Acceptance Specification 1 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/10 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments

12.0 PLATING THICKNESS Test equipment Method

Coating thickness Average coating
12.1 Plating thickness of internal plated parts 10μ
tester thickness
13.0 Paint test report

Inspection characteristic Test equipment Method

Coating thickness Average coating
13.1 E D dip coating 15μ
tester thickness
Coating thickness Average coating
13.2 Paint thickness Internal (refer inspection plan) 95μ
tester thickness
Paint thickness External (refer inspection Coating thickness Average coating
13.3 95μ
plan) tester thickness
RAL / IS shade Visual
13.4 Colour RAL5015
card Camparision

13.5 Cross cut based on Cross cut tool GT 0 to 1 GT 0

Piercing test 30 dia hole on painted part(Avg Avg paint peel off
13.6 Vernier 1.2mm
paint peel must not exceed >2.0mm <2.0mm

Visual
13.7 Finish (Texture / SG / Glossy) Master sample Texture
Camparision
Coating thickness Average coating
13.8 Powder coating thickness of Plinth NA
tester thickness
Painted parts free of defect (Pin
13.9 Visual Visual Inspection NIL
holes,dust,other contamination,scratches)

14.0 Declaration of Conformity

14.1 Protection category : IP -54

We hereby declare that, supplied Models and Quantity will comply with IP protection catergory as stated in point 14.1.
14.2 All opening in this enclosure must be covered with closure plates, system or conduits with the same type rating as this enclosure to
meet the above mentioned IP protection category.
Decision : Conditions/Comments :

Release : YES
On hold :
Inspector : CHIRU Approved : Patil

Date : 21.07.2021 Date : 21.07.2021

Acceptance Specification 2 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/50 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments
1.0 FRAME: 400WX2000HX600D
1.1 Frame profiles parallel, deflection Max 2mm OK NIL
1.2 Welds solid and regular OK NIL
1.3 Welds without porous spots OK NIL
1.4 Dimension of Enclosure OK NIL
2.0 REAR PANEL
2.1 Rear panel support fixed and adjusted OK NIL
2.2 Seal complete and undamaged OK NIL

3.0 DOOR / DOOR'S VCA door

Lock easy to handle.
3.1 Lock Closing Direction - OK NIL
(TS : Counterclockwise / PS : clockwise)
3.2 Seal complete and undamaged OK NIL
Seal piece from double door O.K. and
3.3 NA NA
undamaged
3.4 Spot-welding dents not visible OK NIL
Door assembled rectangular and adjusted
3.5 (Height difference between LH & RH - Max NA NA
3mm
4.0 MOUNTING PLATE
4.1 Straight and correct fitted NA NA
4.2 All screw joints solid tightened NA NA

5.0 Bottom Cover with Gland plate's Bottom Plain Cover

5.1 Screws solid tightened OK NIL

5.2 All parts correct located OK NIL
Top Cover with Cutout & Cover Plate of
6.0 TOP COVER
3MM Thick
Adjusted rectangular and Lifting eyebolds
6.1 OK NIL
sufficient fixed
6.2 Seal complete and undamaged OK NIL

7.0 GROUND CONDUCTOR CONNECTION

Bolts for ground conductor connection
7.1 OK NIL
present and free of coating
8.0 ACCESSORIES As per BOM
Descriptions correct and accessories
8.1 OK NIL
complete existing
9.0 SIDE PANEL RH side only
9.1 Side panel holder fixed and adjusted OK NIL
9.2 Seal complete and undamaged OK NIL
10.0 PACKAGE
Printing clear, complete and according to
10.1 OK NIL
contents
Package and stacking correct and
10.2 OK NIL
undamaged
Spl. Cutouts (RIPL / Customer dwg.
11.0
Number )
11.1 Drawing Number OK NIL

Acceptance Specification 1 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/50 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments

12.0 PLATING THICKNESS Test equipment Method

Coating thickness Average coating
12.1 Plating thickness of internal plated parts 10μ
tester thickness
13.0 Paint test report

Inspection characteristic Test equipment Method

Coating thickness Average coating
13.1 E D dip coating 15μ
tester thickness
Coating thickness Average coating
13.2 Paint thickness Internal (refer inspection plan) 95μ
tester thickness
Paint thickness External (refer inspection Coating thickness Average coating
13.3 95μ
plan) tester thickness
RAL / IS shade Visual
13.4 Colour RAL5015
card Camparision

13.5 Cross cut based on Cross cut tool GT 0 to 1 GT 0

Piercing test 30 dia hole on painted part(Avg Avg paint peel off
13.6 Vernier 1.2mm
paint peel must not exceed >2.0mm <2.0mm

Visual
13.7 Finish (Texture / SG / Glossy) Master sample Texture
Camparision
Coating thickness Average coating
13.8 Powder coating thickness of Plinth NA
tester thickness
Painted parts free of defect (Pin
13.9 Visual Visual Inspection NIL
holes,dust,other contamination,scratches)

14.0 Declaration of Conformity

14.1 Protection category : IP -54

We hereby declare that, supplied Models and Quantity will comply with IP protection catergory as stated in point 14.1.
14.2 All opening in this enclosure must be covered with closure plates, system or conduits with the same type rating as this enclosure to
meet the above mentioned IP protection category.
Decision : Conditions/Comments :

Release : YES
On hold :
Inspector : CHIRU Approved : Patil

Date : 21.07.2021 Date : 21.07.2021

Acceptance Specification 2 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/40 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments
1.0 FRAME: 600WX2000HX600D
1.1 Frame profiles parallel, deflection Max 2mm OK NIL
1.2 Welds solid and regular OK NIL
1.3 Welds without porous spots OK NIL
1.4 Dimension of Enclosure OK NIL
2.0 REAR PANEL
2.1 Rear panel support fixed and adjusted OK NIL
2.2 Seal complete and undamaged OK NIL

3.0 DOOR / DOOR'S Partial doors

Lock easy to handle.
3.1 Lock Closing Direction - OK NIL
(TS : Counterclockwise / PS : clockwise)
3.2 Seal complete and undamaged OK NIL
Seal piece from double door O.K. and
3.3 NA NA
undamaged
3.4 Spot-welding dents not visible OK NIL
Door assembled rectangular and adjusted
3.5 (Height difference between LH & RH - Max NA NA
3mm
4.0 MOUNTING PLATE Partial mounting plate
4.1 Straight and correct fitted OK NIL
4.2 All screw joints solid tightened OK NIL

5.0 Bottom Cover with Gland plate's Bottom Plain Cover

5.1 Screws solid tightened OK NIL

5.2 All parts correct located OK NIL
Top Cover with Cutout & Cover Plate of
6.0 TOP COVER
3MM Thick
Adjusted rectangular and Lifting eyebolds
6.1 OK NIL
sufficient fixed
6.2 Seal complete and undamaged OK NIL

7.0 GROUND CONDUCTOR CONNECTION

Bolts for ground conductor connection
7.1 OK NIL
present and free of coating
8.0 ACCESSORIES As per BOM
Descriptions correct and accessories
8.1 OK NIL
complete existing
9.0 SIDE PANEL
9.1 Side panel holder fixed and adjusted NA NA
9.2 Seal complete and undamaged NA NA
10.0 PACKAGE
Printing clear, complete and according to
10.1 OK NIL
contents
Package and stacking correct and
10.2 OK NIL
undamaged
Spl. Cutouts (RIPL / Customer dwg.
11.0
Number )
11.1 Drawing Number OK NIL

Acceptance Specification 1 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/40 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments

12.0 PLATING THICKNESS Test equipment Method

Coating thickness Average coating
12.1 Plating thickness of internal plated parts 10μ
tester thickness
13.0 Paint test report

Inspection characteristic Test equipment Method

Coating thickness Average coating
13.1 E D dip coating 15μ
tester thickness
Coating thickness Average coating
13.2 Paint thickness Internal (refer inspection plan) 95μ
tester thickness
Paint thickness External (refer inspection Coating thickness Average coating
13.3 95μ
plan) tester thickness
RAL / IS shade Visual
13.4 Colour RAL5015
card Camparision

13.5 Cross cut based on Cross cut tool GT 0 to 1 GT 0

Piercing test 30 dia hole on painted part(Avg Avg paint peel off
13.6 Vernier 1.2mm
paint peel must not exceed >2.0mm <2.0mm

Visual
13.7 Finish (Texture / SG / Glossy) Master sample Texture
Camparision
Coating thickness Average coating
13.8 Powder coating thickness of Plinth NA
tester thickness
Painted parts free of defect (Pin
13.9 Visual Visual Inspection NIL
holes,dust,other contamination,scratches)

14.0 Declaration of Conformity

14.1 Protection category : IP -54

We hereby declare that, supplied Models and Quantity will comply with IP protection catergory as stated in point 14.1.
14.2 All opening in this enclosure must be covered with closure plates, system or conduits with the same type rating as this enclosure to
meet the above mentioned IP protection category.
Decision : Conditions/Comments :

Release : YES
On hold :
Inspector : CHIRU Approved : Patil

Date : 21.07.2021 Date : 21.07.2021

Acceptance Specification 2 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/30 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments
1.0 FRAME: 300WX2000HX600D
1.1 Frame profiles parallel, deflection Max 2mm OK NIL
1.2 Welds solid and regular OK NIL
1.3 Welds without porous spots OK NIL
1.4 Dimension of Enclosure OK NIL
2.0 REAR PANEL
2.1 Rear panel support fixed and adjusted OK NIL
2.2 Seal complete and undamaged OK NIL

3.0 DOOR / DOOR'S Bolted cover

Lock easy to handle.
3.1 Lock Closing Direction - NA NA
(TS : Counterclockwise / PS : clockwise)
3.2 Seal complete and undamaged OK NIL
Seal piece from double door O.K. and
3.3 NA NA
undamaged
3.4 Spot-welding dents not visible OK NIL
Door assembled rectangular and adjusted
3.5 (Height difference between LH & RH - Max NA NA
3mm
4.0 MOUNTING PLATE
4.1 Straight and correct fitted NA NA
4.2 All screw joints solid tightened NA NA

5.0 Bottom Cover with Gland plate's Bottom Plain Cover

5.1 Screws solid tightened OK NIL

5.2 All parts correct located OK NIL
Top Cover with Cutout & Cover Plate of
6.0 TOP COVER
3MM Thick
Adjusted rectangular and Lifting eyebolds
6.1 OK NIL
sufficient fixed
6.2 Seal complete and undamaged OK NIL

7.0 GROUND CONDUCTOR CONNECTION

Bolts for ground conductor connection
7.1 OK NIL
present and free of coating
8.0 ACCESSORIES As per BOM
Descriptions correct and accessories
8.1 OK NIL
complete existing
9.0 SIDE PANEL
9.1 Side panel holder fixed and adjusted NA NA
9.2 Seal complete and undamaged NA NA
10.0 PACKAGE
Printing clear, complete and according to
10.1 OK NIL
contents
Package and stacking correct and
10.2 OK NIL
undamaged
Spl. Cutouts (RIPL / Customer dwg.
11.0
Number )
11.1 Drawing Number OK NIL

Acceptance Specification 1 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/30 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments

12.0 PLATING THICKNESS Test equipment Method

Coating thickness Average coating
12.1 Plating thickness of internal plated parts 10μ
tester thickness
13.0 Paint test report

Inspection characteristic Test equipment Method

Coating thickness Average coating
13.1 E D dip coating 15μ
tester thickness
Coating thickness Average coating
13.2 Paint thickness Internal (refer inspection plan) 95μ
tester thickness
Paint thickness External (refer inspection Coating thickness Average coating
13.3 95μ
plan) tester thickness
RAL / IS shade Visual
13.4 Colour RAL5015
card Camparision

13.5 Cross cut based on Cross cut tool GT 0 to 1 GT 0

Piercing test 30 dia hole on painted part(Avg Avg paint peel off
13.6 Vernier 1.2mm
paint peel must not exceed >2.0mm <2.0mm

Visual
13.7 Finish (Texture / SG / Glossy) Master sample Texture
Camparision
Coating thickness Average coating
13.8 Powder coating thickness of Plinth NA
tester thickness
Painted parts free of defect (Pin
13.9 Visual Visual Inspection NIL
holes,dust,other contamination,scratches)

14.0 Declaration of Conformity

14.1 Protection category : IP -54

We hereby declare that, supplied Models and Quantity will comply with IP protection catergory as stated in point 14.1.
14.2 All opening in this enclosure must be covered with closure plates, system or conduits with the same type rating as this enclosure to
meet the above mentioned IP protection category.
Decision : Conditions/Comments :

Release : YES
On hold :
Inspector : CHIRU Approved : Patil

Date : 21.07.2021 Date : 21.07.2021

Acceptance Specification 2 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/20 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments
1.0 FRAME: 600WX2000HX600D
1.1 Frame profiles parallel, deflection Max 2mm OK NIL
1.2 Welds solid and regular OK NIL
1.3 Welds without porous spots OK NIL
1.4 Dimension of Enclosure OK NIL
2.0 REAR PANEL
2.1 Rear panel support fixed and adjusted OK NIL
2.2 Seal complete and undamaged OK NIL

3.0 DOOR / DOOR'S Partial doors

Lock easy to handle.
3.1 Lock Closing Direction - OK NIL
(TS : Counterclockwise / PS : clockwise)
3.2 Seal complete and undamaged OK NIL
Seal piece from double door O.K. and
3.3 NA NA
undamaged
3.4 Spot-welding dents not visible OK NIL
Door assembled rectangular and adjusted
3.5 (Height difference between LH & RH - Max NA NA
3mm
4.0 MOUNTING PLATE Partial mounting plate
4.1 Straight and correct fitted OK NIL
4.2 All screw joints solid tightened OK NIL

5.0 Bottom Cover with Gland plate's Bottom Plain Cover

5.1 Screws solid tightened OK NIL

5.2 All parts correct located OK NIL
Top Cover with Cutout & Cover Plate of
6.0 TOP COVER
3MM Thick
Adjusted rectangular and Lifting eyebolds
6.1 OK NIL
sufficient fixed
6.2 Seal complete and undamaged OK NIL

7.0 GROUND CONDUCTOR CONNECTION

Bolts for ground conductor connection
7.1 OK NIL
present and free of coating
8.0 ACCESSORIES As per BOM
Descriptions correct and accessories
8.1 OK NIL
complete existing
9.0 SIDE PANEL
9.1 Side panel holder fixed and adjusted NA NA
9.2 Seal complete and undamaged NA NA
10.0 PACKAGE
Printing clear, complete and according to
10.1 OK NIL
contents
Package and stacking correct and
10.2 OK NIL
undamaged
Spl. Cutouts (RIPL / Customer dwg.
11.0
Number )
11.1 Drawing Number OK NIL

Acceptance Specification 1 of2 QP 1025

 Quality Assurance
Acceptance Specification No.: QP 1025 Rev. No.: "G"

Product : TS MCC Quantity: 01 Number

Customer : ATC ENGINEERING SYSTEMS PVT LTD Project :

Article No.: 9660997 Purchase order number: PO/2020-21/0232-A-BLR_PB1 Utity PDB

Work order No./

2600161876/20 Enclosure [Link].: (From - To)
Sale order No.:
Inspection Deviation /
No.: Specification Remarks
(OK / NOK) Comments

12.0 PLATING THICKNESS Test equipment Method

Coating thickness Average coating
12.1 Plating thickness of internal plated parts 10μ
tester thickness
13.0 Paint test report

Inspection characteristic Test equipment Method

Coating thickness Average coating
13.1 E D dip coating 15μ
tester thickness
Coating thickness Average coating
13.2 Paint thickness Internal (refer inspection plan) 95μ
tester thickness
Paint thickness External (refer inspection Coating thickness Average coating
13.3 95μ
plan) tester thickness
RAL / IS shade Visual
13.4 Colour RAL5015
card Camparision

13.5 Cross cut based on Cross cut tool GT 0 to 1 GT 0

Piercing test 30 dia hole on painted part(Avg Avg paint peel off
13.6 Vernier 1.2mm
paint peel must not exceed >2.0mm <2.0mm

Visual
13.7 Finish (Texture / SG / Glossy) Master sample Texture
Camparision
Coating thickness Average coating
13.8 Powder coating thickness of Plinth NA
tester thickness
Painted parts free of defect (Pin
13.9 Visual Visual Inspection NIL
holes,dust,other contamination,scratches)

14.0 Declaration of Conformity

14.1 Protection category : IP -54

We hereby declare that, supplied Models and Quantity will comply with IP protection catergory as stated in point 14.1.
14.2 All opening in this enclosure must be covered with closure plates, system or conduits with the same type rating as this enclosure to
meet the above mentioned IP protection category.
Decision : Conditions/Comments :

Release : YES
On hold :
Inspector : CHIRU Approved : Patil

Date : 21.07.2021 Date : 21.07.2021

Acceptance Specification 2 of2 QP 1025

 Autornatic
AE Electric Ltd.
366, Near Suraiya Bunglow, Suraiya Road, Lonavala - 4'10401.

CURRENT TRANSFORMERS TEST CERTIFICATE

t/
CT TESTED Measuring / Protection

CT ryPE Ring Tape lnsulation CT

Resin Cast F
SPECIFICATION :

System Voltage 660 V {-

Frequencl 50 Hz t/-
Ratio
o" ",)t
Buden 5I10t15t20|25
[Link] ljhss !1-ll/ h ll/ Ilh / 5Plll / PS / 'lllPlll/ IP:/ll / ll 5si
Se alNo.
ozft{)09=szzlsV
,I }"2c1
Quantity -:+tes.- 27 tto3
This is to certiry that Current Transformers bearing Serial Nos. given
above have been manufactured strictly in accordance with Specification : ISS : 2705-1992 to
which they confirm and following are the routine tests performed

1. POLARITY TEST : Checked as per terrninalrnarking.

2. HIGH VOLTAGE POWER FREOUENCY ONE MINUTE WITHSTAND TEST I

1) Withstood 3 Kv between Primary to Secondary and earth

2) Wthstood 3 Kv between Secondary to Primary to earth

INTER-TURN INSULATION TEST Conducted as per ISS/BSS and test was satisfactory.

4. MTION & PHASE ANGLE ERROR TEST Tested as per ISS/BSS and result found
within limits specified therein.
5. COMPOSITE ERROR TEST Tested as per ISS/BSS and result found within Limits specified
therein for Protection Class CTS.

Customer :

Customer Order No. :

works order No. : O9= klZ- rss

This is to certiry that above Transfomers has been Tested by us.

esung tsngrneer
For AUToMATIC ELECTRICAL LIMITED

oate: Q9 ro\ r zozo

 Autornatic
AE Electric Ltd.
366, Near Suraiya Bunglow Suraiya Road, Lonavala - 410401.

CURRENT TRANSFORMERS TEST CERTIFICATE

CT TESTED Measuring / Protection

CT ryPE Ring Tape Insulation CT

Resin Cast L-
SPECIFICATION :

Syslem Voltage 660V

q
Frequency 50 Hz t-'
Ratio
'1Oo tsA
Burden s t to n{izo tzs
L1_0/5.0 /0.5 /5P'10 / PS / 10p10 /5p20l 0.5s
Eoriall'lo.
'o6lt-6)ogVttvloe A r+
Quanrity : :+ros t p6 g
This is to certiry that Current Transformers bearjng Serial Nos. glven
above have been manufactured strictly in accordance with Specification : ISS : 2705-1992 to
which they confirm and following are the routine tests pefformed

l. POLARITY TEST : Checked as per terminal marking.

2. HIGH VOLTAGE POWER FREQUENCY ONE MINUTE WITHSTAND TEST :

1) Wthstood 3 Kv between Primary to Secondary and earth

2) Vvithstood 3 Kv between Secondary to Primary to eadh

INTER-TURN INSULATION TEST Conducted as per ISS/BSS and test was satisfactory.

4. RATION & PHASE ANGLE ERROR TEST Tested as per |SS/BSS and result found
within limits specified therein.
COMPOSITE ERROR TEST Tested as per ISS/BSS and result found within Limits specified
therein for Protection Class CTS.

Customer ;

Cuslomer order No. :

Wo*s order No. : hrq2t,

This is to cerlii/ lhat above Transformers has been Tested by us.

FoT AUTOMATIC ELECTRICAL LIMITED

Date: pQ ro( r zo >cl

 Autornatic
AE Electric Ltd.
366, Near Suraiya Bunglow, Suraiya Road, Lonavala - 410401.

CURRENT TRANSFORMERS TEST CERTIFICATE

L/'
CT TESTED Measuring / Protection
CT TYPE Ring Tape Insulation CT
Resin Cast (-
SPECIFICATION :

Syslem Voltage 660 V ?-

Frequencry 50 Hz l--
Ratio
20o. t5^
Burden sitonl'tzotzs
d-ol5.0/0.5 /5P10/ ps/ 10p10/5p20l0.5s
Serial No.
nlt9Ior2#21 tos- oLtto
Quantity 3xes'' 6: poj,
This is to certify that Current Transformers bearing Serial Nos. given
above have been manufactured strictly in accordance with Specification : ISS : 2705-1992 to
which they confirm and following are the routine tests performed

1, POLARIry TEST : Checked as per terminal marking.

2. HIGH VOLTAGE POWER FREQUENCY ONE MINUTE WITHSTAND TEST :

1) Wthstood 3 Kv betlveen Pdmary to Secondary and earlh

2) Wthstood 3 Kv between Secondary to Primary to earth

INTER-TURN INSULATION TEST Conducted as per ISS/BSS and test was satisfactory

4. MTION & PHASE ANGLE ERROR TEST Tested as per ISS/BSS and result found
within limits specified therein.
COMPOSITE ERRr:rR TEST TEsted as per tSS/BSS and rosutr rouhd wtthrh Llfirt6 Ep6drtr€d
therein for Protection Class CTS.

Customer :

Customer order No. : z",rt

\}
worksorderNo.: OlZe
=Z :t.q
This is to cerliryfial above Transformers has been Tested by us. "rK
For AUT0MATIC ELECTRICAL LIMITED

oate:69 t6\ t zo2-6

 Autornatic
AE Electric Ltd.
366, Near Suraiya Bunglow, Suraiya Road, Lonavala - 410401.

CURRENT TRANSFORMERS TEST CERTIFICATE

CT TESTED Measuring / Protection

CT ryPE Ring Tape Insulation CT

Resin Cast L./
SPECIFICATION :
System Vollage 660V r./'
Frequency 50 Hz v-
Ratio
/50 rsx
Burden sircn{notzs
Accuracy Class J_0 / 5.0 /0.5 / 5P10 / pS / 10p10 / 5p20 / 0.5s
SedalNo.
061,-6)|qrsSllnt
/-'
k nt
Quantily -:+l"s (doS
This is to cedify that Current Transformers bearing Serial Nos. given
above have been manufactured skictly in accordance with Specification i ISS : 2705-1992 to
which they confirm and following are the routine tests performed

1. POLARITY TEST : Checked as per terminal marking.

2. HIGH VOLTAGE POWER FREQUENCY ONE MINUTE WITHSTAND TES'I :

1) Withstood 3 Kv between Primary to Secondary and earth

2) Wthstood 3 Kv between Secondary to Primary to eadh

[Link] INSULATION TEST Conducted es per |SS/BSS and test was satisfactory

4. MTION & PHASE ANGLE ERROR TEST Tested as per ISS/BSS and resutt found
within limite rpccifi.d thersin.
COMPOIITE ERROR TEgT Toctod o0 por tnri/Brfti ond rcoult tQund wtthin Limits sDcclflcd
therein for Protection Ciass CTS.

Customer :

Cuslomer order No.

wo*s oroertlo. : 0
:

991-Jl ffitfr#
this is lo certiry that above Transformers has been Tesled by us.

FoT AUTOMATIC ELECTRICAL LIMITED

Date:o, I0f I2o2-O

 Autornatic
AE Electric Ltd.
366, Near Suraiya Bunglow, Suraiya Road, Lonavata - 410401.

CURRENT TRANSFORMERS TEST CERTIFICATE

OT TECTED Mcasuffi / Fruler.;tiurr

CT WPE Ring Tape Insulation cT

Resin Cast L-
SPECIFICATION :
System Vollage 66OV v-
Frequency 50 Hz 9z
Ratio

Eurden
ljwo t25
5 t 10 t15 t20
Accuracy Class ;m/5.0/0.5 /5P10/ PS | 1OP1O | 5P2O | 0.55
Sedal No.
ilf t9)or2cazf tt h*
Ouanljty :+os.- ( t-Ssf
This is to certiry that Current Transformers bearing Serial Nos. given
above have been manufactured strictly in accordance with Specification : ISS : 2705-1992 to
which they confirm and following are the routine tests performed

'1. POLARITY TEST : Checked as per terminal marking.

2. HIGH VOLTAGE POWER FREQUENCY ONE MINUTE WITHSTAND TEST :

1) Wthstood 3 Kv between Pdmary to Secondary and earth

2) Wthstood 3 Kv between Secondary to Primary to earth

INTER-TURN INSULATION TEST Conducted as per ISS/BSS and test was satisfactory

4. RATION & PHASE ANGLE ERROR TEST Tested as oer ISS/BSS and result found
within limits specified therein.
5. COMPOSITE ERROR TEST Tested as per ISS/BSS and result found within Limits specified
therein for Protection Class CTS.

Customer

*$
:

Cuslomer Order No. :

wo*s orderNo.: 0 L12 63 2- fi,E

This is to certit lhat above Transformers has been Tested by us.
{,/
Testing Engineer
FoT AUTOMATIC ELECTRICAL LIMITED

Date:Orrtltzo2o
 Automatic
AE Electric Ltd.
366, Near Suraiya Bunglow Suraiya Road, Lonavala - 410401 .

CURRENT TRANSFORMERS TEST CERTIFICATE

CT TESTED Measuring / Protectlon
CT ryPE Ring Tape Insulation CT
Resin Cast r
SPECIFICATION :
System Voltage 660 V |/_
Frequency 50Hz "
Ralio

Burden 5|10t15t20t25
J-0l 5.0/ 0.5 /5p10/ ps / 10p10/5p20l0.5s
Sedal No. ,ovzq
//
6vq 8?( / t"6 h / f(
euantiry , axo*. )?tlog
This is to certiry that Curent Transformers bearing Serial Nos. given
above have been manufactured stricfly in accordance with Specification : ISS : 2705-1992 to
which they confirm and following are the routine tests performed

1. POLARITY TEST i Checked as per terminat marking.

2. HIGH VOLTAGE POWER FREQUENCY ONE MINUTE WTHSTAND TEST :

1) Withstood 3 Kv between primary to Secondary and earth

2) WllNtood 3 Kv between Secondary to ptirnary to earth

[Link] INgULATION TEST Co [Link] as per ISS/BSS ahd test Was sattstactory.

4, RATION & PHASE ANGLE ERROR TEST Tested as per ISS/BSS and resutt found
within limits specified therein.
COMPOSITE ERROR TEST Tested as per ISS/BSS and result found within Limjts soecified
therein for Protection Class CTS.

Customer :

Cuslomer Order No. :

lsi
Works order No. : hq\ t?( al( $)
This is to cedify that above Transformers has been Tested by us.

Testing Engineer
For AUT0MATIC ELECTRICAL LIMtTED

Date: 09 t0( r zo 2-o