1 2 3 4 5 6 7 8

A A

B B

Total Actual Valve

Pressure Drop

C
Pressure Gauge C
Pressure Gauge Down Stream
Tank Capacity UP Stream Tank Capacity
10000 Ltr. P1 P2 8000 Ltr.

Pump 6" Sch.80 6" Sch.80

Valve
Flow Meter
D D

Q=6000 LPM
Min.

E E

t min
NOTE: APPROXIMATE WT: XXXX kg. UNMENTIONED DIMENSION SHALL BE AS PER IS2102 (PART-1) 1980 FOR BUTT WELDS
WELD QUALITY UNLESS OTHERWISE SPECIFIED
COMPLETE ADVANCED OILFIELD TECHNOLOGY COMPANY

a
MACHINING
TOLERANCE FOR SI SYSTEM PENETRATION
60°
WELDING-QUALITY: CLASS C
STEEL: ACCORDING TO ISO5817:2012
A TC MEMBER OF AL SULAIMI GROUP,
LINEAR - MM ALUMINIUM: ACCORDING TO ISO10042:2005 FOR FILLET WELDS
ADVANCED OILFIELD TECHNOLOGY COMPANY
COMMITTED TO EXCELLENCE PO BOX 223, RUSAYL,PO-124, SULTANATE OF OMAN
0.5 - 6 ± 0.1 FABRICATION a=0.7 X t min A GROUP OF TECHNICAL TRADING COMPANY LLC

6 - 30 ± 0.2 LINEAR - MM ANGULAR NAME SIGN DRG NO REV

30 - 120 ± 0.3 0 - 1000 ± 2 0° - 10° ± 1 2° BREAK SHARP EDGES - .25 MAX ALL DIMENSIONS IN MM [MILLIMETER]. III ANGLE PROJECTION
F 120 - 315 ± 0.5 1000 - 2500 ± 3 10° - 50° ± 1° CORNER RADII - .75 MIN DO NOT SCALE THIS DRAWING.
0 F
315 - 1000 ± 0.8 2500 - 7500 ± 5 50° - 120° ± 1.5° DWN MS
CONCENTRICITY - .25 T.I.R REMOVE BURR & SHARP CORNERS.
1000 - ABOVE ± 1.2 7500 - ABOVE ± 6 120° - 360° ± 2° CHK SM TITLE Schematic Diagram for Valve Test
SQUARENESS - .25 IN 250MM
TOLERANCE FOR IPS SYSTEM ASK IF ANY DOUBT.
PARALLELISM - .25 IN 250MM APP YJ DIAGRAM
FABRICATION MACHINING UNDIFINED SURFACE ALL FLANGES DRILLING MUST BE
.X - ± .25 .X - ± .30 FINISH - Ra 0.8um DATE - 29/09/2021
.XX - ± .125 .XX - ± .15 STRADDLE COMMON CENTER LINE.
0 FOR APPROVAL 29/09/21 NS .XXX - ± .060 .XXX - ± .005 PRJ- NA MATERIAL - NA
ANGLES - ± 3° .XXXX - ± .0010
ECN NO REV ECN DESCRIPTION DATE BY ANGLES - ± 12° THIS DRAWING BELONG TO AOTC AND SHALL NOT BE COPIED/MODIFIED ANYWAY WITHOUT THEIR PRIOR PERMISSION. SCALE: NTS SHEET NO. 1/1 A3

1 2 3 4 5 6 7 8