Scribd
Upload
104 views5 pages

NX300 NX300 NX300 NX300 Firmware Upgrade Guide Firmware Upgrade Guide II HH ( (Ii - Launcher) Launcher)

The document provides instructions for upgrading the firmware on an NX300 camera. It outlines an easy method using the i-Launcher program to connect the camera to a computer and select the firmware upgrade menu. Alternately, users can download the firmware directly from Samsung's website and copy it to an SD card. The update process involves checking the current and new firmware versions, downloading and installing the update in two stages, and restarting the camera once complete. Users are warned not to interrupt power during the process to avoid damaging the camera.

Uploaded by

alit ramadani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
104 views5 pages

NX300 NX300 NX300 NX300 Firmware Upgrade Guide Firmware Upgrade Guide II HH ( (Ii - Launcher) Launcher)

The document provides instructions for upgrading the firmware on an NX300 camera. It outlines an easy method using the i-Launcher program to connect the camera to a computer and select the firmware upgrade menu. Alternately, users can download the firmware directly from Samsung's website and copy it to an SD card. The update process involves checking the current and new firmware versions, downloading and installing the update in two stages, and restarting the camera once complete. Users are warned not to interrupt power during the process to avoid damaging the camera.

Uploaded by

alit ramadani
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

NX300

Firmware Upgrade guide


(i-Launcher)
h

Digital Imaging Biz. CS Team


NX300 Firmware upgrade guide

● Easy
E Fi
Firmware upgrade:
d PlPlease use i-Launcher
iL h program

(You can install “i-Launcher” program using installation CD)

● If you download Firmware from [Link] homepage directly,

 refer to No.7(page 4)

※ Information

1) Use the full charged battery


2) Suggested memory card format before upgrade start
3) During the updating process:

Do not cut off the power / Do not remove the battery

 It causes the cannot power-on or the severe damage

4) Finish upgrade: all menu will be reset


Firmware Upgrade method

1. You can connect the camera to your computer 3. You can check precautions
2. Opening “Samsung i-Launcher”
 select “Firmware Upgrade” menu

4. Firmware download start


5. Once the transfer is complete, 8. Select the MENU → Setting
click
li k the
th Close
Cl button
b tt → Device Information

9. Select Firmware Update


→ Body Firmware Update

6. Terminate the USB cable connection

7. Turn the camera on


※ If you don’t use i-Launcher but download
Firmware from [Link] homepage directly
 unzip
p “zip”
p file & copy
py firmware file to SD card
10 Update will start follow below sequence
10.

Body Upgrade? Firmware check complete.


complete
Checking firmware...
Device will restart.
1.00 >1.10
Yes No

F/W Check Update(1/2) Update(2/2) Update Finish F/W Check Update(1/2) Update(2/2) Update Finish F/W Check Update(1/2) Update(2/2) Update Finish

① Firmware version checking ② checking firmware file ③ Device will restart after checking
Press “Yes”  Upgrade start firmware

UPDATING(1/2) UPDATING(2/2)
Body Firmware update completed
DO NOT POWER OFF It will reboot in 1 minute

F/W Check Update(1/2) Update(2/2) Update Finish F/W Check Update(1/2) Update(2/2) Update Finish F/W Check Update(1/2) Update(2/2) Update Finish

④ after restart  updating start ⑤ You can see the updating status ⑥ Finish upgrade
※ Do not cut off the power After finish updating(2/2)  You can see “Firmware update
Do not remove the battery Camera power-off & reboot completed” message
※ upgrade is not finished ※ If your camera stop or power
power-off
off
during upgrading
 Please retry upgrade

You might also like