BEAM DESIGN CALCULATION

Project Name : dsds

Client Name : sdsdsdsdd
Engineer Name : sdsds
Analysis File : C:\Users\ARNOLD\Desktop\mr and mrs castillo\staad\mr and mrs
castillo.STD
Analysis Last Modified : 06/07/2021 8:12:53 PM
Level Designed : 7.2 m

Sr.No. Symbol Definitions

1 α = Angle formed with horizontal line along length of Beam
Cross sectional area of structural member measures to the
2 Ach =
outside edge of transverse reinforcement in 'sqmm'
3 Ag = Cross sectional area of concrete in 'sqmm'
Total cross sectional area transverse reinforcement (including
4 Ash =
cross ties) within spacing S in 'sqmm'
5 Avd = Area of diagonal reinforcement in coupler beam in 'sqmm'
6 As = Area of Tension reinforcement required in 'sqmm'
7 As,min = Minimum area of flexural reinforcement in 'sqmm'
8 As,nominal = Nominal area of reinforcement in 'sqmm'
Area of longitudinal reinforcement required to resist torsion
9 Al =
in 'sqmm'
Area of longitudinal reinforcement required on each face to
10 Al,face =
resist torsion in 'sqmm'
11 At Torsion = Area of closed stirrups resisting torsion in 'sqmm'
Area of longitudinal reinforcement provided at given section
12 AstPrv =
in 'sqmm'
Area of shear reinforcement required per meter length in
13 Av =
'sqmm'
Minimum area of shear reinforcement in as per clause
14 Av,min =
411.4.6.1 in 'sqmm'
Minimum area of longitudinal torsional reinforcement as per
15 Al,min =
clause 411.5.5.3 in 'sqmm'
Total area of shear reinforcement required, including that for
16 Av Total Reqd =
torsion in 'sqmm'
Total area of shear reinforcement provided, including that for
17 Av Total Prv =
torsion in 'sqmm'
18 Ao = Gross area enclosed by shear flow path in 'sqmm'
Area enclosed by centerline of the outermost closed
19 Aoh = transverse torsional reinforcement as per clause 411.5.3.1 in
'sqmm'
Total area of longitudinal reinforcement calculated at a given
20 Ast =
section in 'sqmm'
Area of Skin reinforcement calculated for given section in
21 Asr =
'sqmm'
Area of Compression reinforcement required for doubly
22 Asc = reinforced section or if torsion exists in 'sqmm'
Area of shear reinforcement required for sway condition in
23 Asv Reqd Sway =
'sqmm'
24 b = Width of the Beam in 'mm'
25 bw = Width of Web ( For flanged Beam ) in 'mm'
C/C distance between longitudinal reinforcement along B in
26 b' =
'mm'
27 bc = Oustside dimension of transverse reinforcement in 'mm'
28 Cc = Effective Cover to tension reinforcement in 'mm'
29 Cmin = Clear cover in 'mm'
30 c' = Effective cover to reinforcement at compression face in 'mm'
31 d = Effective depth of Beam in 'mm'
C/C distance between longitudinal reinforcement along D in
32 d' =
'mm'
33 D = Depth of Beam in 'mm'
34 Es = Modulus of elasticity of steel in 'N/sqmm'
Specified compressive strength of concrete in cylinder in
35 f'c =
'N/sqmm'
Calculated tensile stress in reinforcement at service loads,
36 fs =
'N/sqmm'
37 Hf = Thickness of Flange in 'mm'
Maximum C/C horizontal spacing of hoops legs on all faces
38 hx =
in 'mm'
39 Icr = Moment Of Inertia Of concrete crack section
40 l = Effective Length Of Beam (Clear Span) in 'mm'
41 Legs = Number Of legs Of the shear reinforcement
42 Mcr = Cracking Moment
Hogging moments of resistance of member at the joint faces
43 Mh =
in 'kNm'
Hogging moments Of resistance Of member at the joint faces
44 Mpr1 =
in 'kNm'
Sagging moments Of resistance Of member at the joint faces
45 Mpr2 =
in 'kNm'
Sagging moments Of resistance Of member at the joint faces
46 Ms =
in 'kNm'
47 Mu = Factored Bending Moment at a section in 'kNm'
Nominal flexural strength Of Singly Reinforced Section At
48 Mubal =
Balance Neutral Axis in 'kNm'
49 Ptmin = Minimum percentage steel As per clause 410.5
50 PtPrv = Provided percentage steel
51 Stirrup = Bar mark representing shear stirrup
52 S = spacing Of confining links in 'mm'
53 SCalc = Stirrup spacing calculated As per Asv in 'mm'
54 Sprv = Stirrup spacing provided in 'mm'
55 Tcr = Cracking torque under pure Torsion in 'kNm'
56 Tu = Factored Torsional Moment at a section in 'kNm'
Shear due to Dead and Live load in Simply supported beam
57 VD+L =
in 'kN'
58 Ve = Earthquake induced shear in 'kNm'
59 φVc = Reduced Shear strength provided by concrete in 'kN'
Reduced Shear strength provided by concrete for sway
60 φVc sway =
condition in 'kN'
61 Vu = Factored Shear Force at a section in 'kN'
62 Vu-A1(sway Left) = VD+Lleft - (Mpr1left + Mpr2right / L ) in 'kN'

63 Vu-A2(sway Left) = VD+Lleft + (Mpr2left + Mpr1right / L ) in 'kN'

64 Vu-B1(sway Right) = VDLRight - (Mpr1left + Mpr2right / L ) in 'kN'

65 Vu-B2(sway Right) = VDLRight + (Mpr2left + Mpr1right / L ) in 'kN'

66 Vud = Design Shear Force due to sway in 'kN'
Nominal shear strength provided by shear reinforcement in
67 Vs =
'kN'
Nominal shear strength provided by shear reinforcement for
68 Vs Sway =
sway condition in 'kN'
69 Vu sway = Max (Vu-A1,Vu-A2) & (Vu-B1,Vu-B2) in 'kN'
70 y = Neutral axis depth.
71 Φ = Strength reduction factor

All Forces are in 'kN', 'kNm', Stress in 'N/sqmm' & Dimension are in 'mm'.

Code References
NSCP - 2015
Sr.No. Item Clause / Table
407.3.3.1, 408.3.3.1,
1. Ptmax :
409.3.3.1
2. As,min (flex) (B) : 409.6.1.1, 409.6.1.2
3. As,min : 409.6.1.3
4. Vc : 422.5
5. Asv : 422.5.10.5 & 422.6.7
6. Min Shear Reinf : 409.6.3.1
Max Stirrup
7. : 409.7.62
Spacing
Shear Reinf -
8. : 422.7.3.1
Torsion
Side Face
9. : 409.7.2.3
Reinforcement
10. Tcr : 409.5.4.1
11. fs,perm : 424.3.2.1
12. fc,perm : A.3.1 (ACI 318-99)

13. Wcr :
Eq 1-2 ( ACI 224R-
 01)
14. Ptmin : 418.6.3.1
15. Asmin : 418.6.3.1
16. Sclc : 418.6.4.1 & 418.6.4.4

Group : G1
Beam No : B1
7.2
Analysis Reference (Member) : 120
m
Beam Length : 3500 mm
Breadth (B) : 300 mm
Depth (D) : 200 mm
Effective Depth (d) : 150 mm
Design Code : NSCP - 2015
Beam Type : Ductile Beam (Special Frame)
Grade Of Concrete (f'c) : C21 N/sqmm
Grade Of Steel : Fy227 N/sqmm
Clear Cover (Cmin) : 40 mm
Es : 2x10^5 N/sqmm
Mubal : 35.35 kNm
As,min (flex) (B) : 277.53 sqmm
As,nominal (Bn) : 58.5 sqmm
As,min(user input)(B') : 58.5 sqmm

For Longitudinal Reinf

Beam Bottom Beam Top
Left Mid Right Left Mid Right
Critical L/C - Analysis 23 15 25 17 25 15
Critical L/C - RCDC 19 11 21 13 21 11
Mu (kNm) 1.64 2.52 1.47 6.52 1.39 5.95
As (flex) (sqmm) (C) 53.83 83.36 48.44 219.86 45.61 199.79
Asc (flex) (sqmm) (A) - - - - - -
Tu (kNm) 0.03 0.12 0.1 0.19 0.1 0.12
Tcr/4 (kNm) 1.02 1.02 1.02 1.02 1.02 1.02
Al, min(sqmm)(Tor.) (D) - - - - - -
Al (sqmm) (Tor.) (E) - - - - - -
Al (Dist) (sqmm) (D) - - - - - -
Ast (sqmm) 157.08 110.88 157.08 277.53 60.66 265.72
AstPrv (sqmm) 339.3 339.3 339.3 339.3 339.3 339.3
Reinforcement Provided 3-#12 3-#12 3-#12 3-#12 3-#12 3-#12

Note: Calculation of Ast

Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B)
Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B)
Ast = Bn (for Mu = 0)
Where,
Compression reinforcement required for
A = Asc (flex) =
bending moment
B = As,min (flex) = Min area of flexural reinforcement
Bn = As,nominal = Nominal area of reinforcement
Total area of longitudinal reinforcement
C = As (flex) =
calculated at a given section
Distributed longitudinal torsional
D = Al (Dist) =
reinforcement at section considered
Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B +
Ast (Dist) (sqmm) =
2D))

For Transverse Reinf

Left Mid Right
Critical L/C - RCDC 9 9 9
PtPrv (%) 0.754 0.754 0.754
Vu (kN) 5.03 3.72 4.89
Mu-Sect (kNm) 3.04 0.48 2.79
Φ Vc (kN) 0 0 0
Vs (kN) 8.38 6.19 22.74
Aoh (sqmm) - - -
At (sqmm/m) - - -
Av (sqmm/m) 462.56 462.56 667.73
Tu (kNm) 0.13 0.13 0.13
At Torsion (sqmm/m) 0 0 0
Av Total Reqd (sqmm/m) 462.56 462.56 667.73
Asv Reqd (sqmm/m) 462.56 462.56 462.56
For Sway Shear
VD+L (kN) 5.14 3.94 5.16
Mh (kNm) 13.58 0 13.58
Ms (kNm) 13.58 0 13.58
Sway-Right (kN) 3.34 12.42 13.64
Sway-Left (kN) 13.63 4.55 3.93
Vu-Sway (kN) 13.63 12.42 13.64
Vud (kN) 13.63 12.42 13.64
Φ Vc Sway(kN) 0 0 0
Vs Sway(kN) 22.71 20.7 22.74
Asv Reqd Sway(sqmm/m) 666.96 608.02 667.73
Asv Reqd Final = max (Asv 666.96 608.02 667.73
Reqd , Asv Reqd Sway )
(sqmm/m)
Legs 2 2 2
Stirrup Rebar 10 10 10
SCalc (mm) 75 75 75
SPrv (mm) 75 75 75
Av Total Prv (sqmm/m) 2094.4 2094.4 2094.4

Maximum Spacing Criteria

Basic
                Spc1 = 75 mm
                Spc2 = 300 mm
For Torsion
                (X1 = 230, Y1 = 130)
                Spc3 = 300 mm
                Spc4=(X1+Y1)/4 = 90 mm

For Ductility (Special Frames)

       Left Section,  Right Section

= 72 mm
Spc5 = 6 x Small Longitudinal Dia
              Spc6 = d / 4 = 38 mm
              Spc7 = 150 mm
             Provided Spacing = 75 mm

       Mid Section
              Provided Spacing = 75 mm

Skin reinforcement

Beam Width = 300 mm

Beam Depth = 200 mm
Depth = 200 <= 900,    Hence Skin Reinforcement is not required.

Group : G1
Beam No : B2
7.2
Analysis Reference (Member) : 121
m
Beam Length : 2000 mm
Breadth (B) : 300 mm
Depth (D) : 200 mm
Effective Depth (d) : 150 mm
Design Code : NSCP - 2015
Beam Type : Ductile Beam (Special Frame)
Grade Of Concrete (f'c) : C21 N/sqmm
Grade Of Steel : Fy227 N/sqmm
Clear Cover (Cmin) : 40 mm
Es : 2x10^5 N/sqmm
Mubal : 35.35 kNm
As,min (flex) (B) : 277.53 sqmm
As,nominal (Bn) : 58.5 sqmm
As,min(user input)(B') : 58.5 sqmm

For Longitudinal Reinf

Beam Bottom Beam Top
Left Mid Right Left Mid Right
Critical L/C - Analysis 23 25 25 17 15 15
Critical L/C - RCDC 19 21 21 13 11 11
Mu (kNm) 3.6 2.07 3.68 5.28 2.2 5.33
As (flex) (sqmm) (C) 119.5 68.3 122.3 176.89 72.7 178.46
Asc (flex) (sqmm) (A) - - - - - -
Tu (kNm) 0.11 0.14 0.14 0.3 0.27 0.27
Tcr/4 (kNm) 1.02 1.02 1.02 1.02 1.02 1.02
Al, min(sqmm)(Tor.) (D) - - - - - -
Al (sqmm) (Tor.) (E) - - - - - -
Al (Dist) (sqmm) (D) - - - - - -
Ast (sqmm) 158.94 90.84 162.66 235.27 96.7 237.36
AstPrv (sqmm) 339.3 339.3 339.3 339.3 339.3 339.3
Reinforcement Provided 3-#12 3-#12 3-#12 3-#12 3-#12 3-#12

Note: Calculation of Ast

Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B)
Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B)
Ast = Bn (for Mu = 0)
Where,
Compression reinforcement required for
A = Asc (flex) =
bending moment
B = As,min (flex) = Min area of flexural reinforcement
Bn = As,nominal = Nominal area of reinforcement
Total area of longitudinal reinforcement
C = As (flex) =
calculated at a given section
Distributed longitudinal torsional
D = Al (Dist) =
reinforcement at section considered
Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B +
Ast (Dist) (sqmm) =
2D))

For Transverse Reinf

Left Mid Right
Critical L/C - RCDC 9 9 9
PtPrv (%) 0.754 0.754 0.754
Vu (kN) 2.49 1.38 2.46
Mu-Sect (kNm) 1.07 0.09 1.04
Φ Vc (kN) 0 0 0
Vs (kN) 4.16 2.3 30.66
Aoh (sqmm) - - -
At (sqmm/m) - - -
Av (sqmm/m) 462.56 462.56 900.41
Tu (kNm) 0.25 0.25 0.25
At Torsion (sqmm/m) 0 0 0
Av Total Reqd (sqmm/m) 462.56 462.56 900.41
Asv Reqd (sqmm/m) 462.56 462.56 462.56
For Sway Shear
VD+L (kN) 2.42 1.39 2.42
Mh (kNm) 13.58 0 13.58
Ms (kNm) 13.58 0 13.58
Sway-Right (kN) 13.55 17.37 18.4
Sway-Left (kN) 18.4 14.58 13.84
Vu-Sway (kN) 18.4 17.37 18.4
Vud (kN) 18.4 17.37 18.4
Φ Vc Sway(kN) 0 0 0
Vs Sway(kN) 30.66 28.94 30.66
Asv Reqd Sway(sqmm/m) 900.39 849.98 900.4
Asv Reqd Final = max (Asv 900.39 849.98 900.4
Reqd , Asv Reqd Sway )
(sqmm/m)
Legs 2 2 2
Stirrup Rebar 10 10 10
SCalc (mm) 75 75 75
SPrv (mm) 75 75 75
Av Total Prv (sqmm/m) 2094.4 2094.4 2094.4

Maximum Spacing Criteria

Basic
                Spc1 = 75 mm
                Spc2 = 300 mm
For Torsion
                (X1 = 230, Y1 = 130)
                Spc3 = 300 mm
                Spc4=(X1+Y1)/4 = 90 mm
 For Ductility (Special Frames)
       Left Section,  Right Section

= 72 mm
Spc5 = 6 x Small Longitudinal Dia
              Spc6 = d / 4 = 38 mm
              Spc7 = 150 mm
             Provided Spacing = 75 mm

       Mid Section
              Provided Spacing = 75 mm

Skin reinforcement

Beam Width = 300 mm

Beam Depth = 200 mm
Depth = 200 <= 900,    Hence Skin Reinforcement is not required.

Group : G1
Beam No : B3
7.2
Analysis Reference (Member) : 122
m
Beam Length : 3000 mm
Breadth (B) : 300 mm
Depth (D) : 200 mm
Effective Depth (d) : 150 mm
Design Code : NSCP - 2015
Beam Type : Ductile Beam (Special Frame)
Grade Of Concrete (f'c) : C21 N/sqmm
Grade Of Steel : Fy227 N/sqmm
Clear Cover (Cmin) : 40 mm
Es : 2x10^5 N/sqmm
Mubal : 35.35 kNm
As,min (flex) (B) : 277.53 sqmm
As,nominal (Bn) : 58.5 sqmm
As,min(user input)(B') : 58.5 sqmm

For Longitudinal Reinf

Beam Bottom Beam Top
Left Mid Right Left Mid Right
Critical L/C - Analysis 23 15 25 17 23 15
Critical L/C - RCDC 19 11 21 13 19 11
Mu (kNm) 2.2 1.94 2.17 5.51 1.54 5.79
As (flex) (sqmm) (C) 72.68 64.02 71.56 184.61 50.65 194.27
Asc (flex) (sqmm) (A) - - - - - -
Tu (kNm) 0.07 0.15 0.05 0.12 0.07 0.15
Tcr/4 (kNm) 1.02 1.02 1.02 1.02 1.02 1.02
Al, min(sqmm)(Tor.) (D) - - - - - -
Al (sqmm) (Tor.) (E) - - - - - -
Al (Dist) (sqmm) (D) - - - - - -
Ast (sqmm) 96.67 85.14 157.08 245.53 67.37 258.37
AstPrv (sqmm) 339.3 339.3 339.3 339.3 339.3 339.3
Reinforcement Provided 3-#12 3-#12 3-#12 3-#12 3-#12 3-#12

Note: Calculation of Ast

Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B)
Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B)
Ast = Bn (for Mu = 0)
Where,
Compression reinforcement required for
A = Asc (flex) =
bending moment
B = As,min (flex) = Min area of flexural reinforcement
Bn = As,nominal = Nominal area of reinforcement
Total area of longitudinal reinforcement
C = As (flex) =
calculated at a given section
Distributed longitudinal torsional
D = Al (Dist) =
reinforcement at section considered
Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B +
Ast (Dist) (sqmm) =
2D))

For Transverse Reinf

Left Mid Right
Critical L/C - RCDC 9 9 9
PtPrv (%) 0.754 0.754 0.754
Vu (kN) 4.02 2.88 4.15
Mu-Sect (kNm) 2.07 0.33 2.26
Φ Vc (kN) 0 0 0
Vs (kN) 6.71 4.8 23.71
Aoh (sqmm) - - -
At (sqmm/m) - - -
Av (sqmm/m) 462.56 462.56 696.43
Tu (kNm) 0.12 0.12 0.12
At Torsion (sqmm/m) 0 0 0
Av Total Reqd (sqmm/m) 462.56 462.56 696.43
Asv Reqd (sqmm/m) 462.56 462.56 462.56
For Sway Shear
VD+L (kN) 4.19 3.11 4.17
Mh (kNm) 13.58 0 13.58
Ms (kNm) 13.58 0 13.58
Sway-Right (kN) 5.87 6.95 14.23
Sway-Left (kN) 14.24 13.17 6.33
Vu-Sway (kN) 14.24 13.17 14.23
Vud (kN) 14.24 13.17 14.23
Φ Vc Sway(kN) 0 0 0
Vs Sway(kN) 23.74 21.94 23.71
Asv Reqd Sway(sqmm/m) 697.21 644.43 696.43
Asv Reqd Final = max (Asv 697.21 644.43 696.43
Reqd , Asv Reqd Sway )
(sqmm/m)
Legs 2 2 2
Stirrup Rebar 10 10 10
SCalc (mm) 75 75 75
SPrv (mm) 75 75 75
Av Total Prv (sqmm/m) 2094.4 2094.4 2094.4

Maximum Spacing Criteria

Basic
                Spc1 = 75 mm
                Spc2 = 300 mm
For Torsion
                (X1 = 230, Y1 = 130)
                Spc3 = 300 mm
                Spc4=(X1+Y1)/4 = 90 mm

For Ductility (Special Frames)

       Left Section,  Right Section

= 72 mm
Spc5 = 6 x Small Longitudinal Dia
              Spc6 = d / 4 = 38 mm
              Spc7 = 150 mm
             Provided Spacing = 75 mm

       Mid Section
              Provided Spacing = 75 mm

Skin reinforcement

Beam Width = 300 mm

Beam Depth = 200 mm
Depth = 200 <= 900,    Hence Skin Reinforcement is not required.

Group : G1
Beam No : B4
7.2
Analysis Reference (Member) : 123
m
Beam Length : 3000 mm
Breadth (B) : 300 mm
Depth (D) : 200 mm
Effective Depth (d) : 150 mm
Design Code : NSCP - 2015
Beam Type : Ductile Beam (Special Frame)
Grade Of Concrete (f'c) : C21 N/sqmm
Grade Of Steel : Fy227 N/sqmm
Clear Cover (Cmin) : 40 mm
Es : 2x10^5 N/sqmm
Mubal : 35.35 kNm
As,min (flex) (B) : 277.53 sqmm
As,nominal (Bn) : 58.5 sqmm
As,min(user input)(B') : 58.5 sqmm

For Longitudinal Reinf

Beam Bottom Beam Top
Left Mid Right Left Mid Right
Critical L/C - Analysis 23 17 25 17 23 15
Critical L/C - RCDC 19 13 21 13 19 11
Mu (kNm) 2.36 2.23 2.62 5.64 1.66 5.74
As (flex) (sqmm) (C) 77.8 73.4 86.62 189.26 54.58 192.48
Asc (flex) (sqmm) (A) - - - - - -
Tu (kNm) - 0.05 0.03 0.05 - 0.02
Tcr/4 (kNm) 1.02 1.02 1.02 1.02 1.02 1.02
Al, min(sqmm)(Tor.) (D) - - - - - -
Al (sqmm) (Tor.) (E) - - - - - -
Al (Dist) (sqmm) (D) - - - - - -
Ast (sqmm) 157.08 97.62 157.08 251.71 72.6 256
AstPrv (sqmm) 339.3 339.3 339.3 339.3 339.3 314.16
Reinforcement Provided 3-#12 3-#12 3-#12 3-#12 3-#12 4-#10

Note: Calculation of Ast

Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B)
Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B)
Ast = Bn (for Mu = 0)
Where,
Compression reinforcement required for
A = Asc (flex) =
bending moment
B = As,min (flex) = Min area of flexural reinforcement
Bn = As,nominal = Nominal area of reinforcement
Total area of longitudinal reinforcement
C = As (flex) =
calculated at a given section
Distributed longitudinal torsional
D = Al (Dist) =
reinforcement at section considered
Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B +
Ast (Dist) (sqmm) =
2D))

For Transverse Reinf

Left Mid Right
Critical L/C - RCDC 9 9 9
PtPrv (%) 0.754 0.754 0.698
Vu (kN) 4.01 2.89 3.92
Mu-Sect (kNm) 2.07 0.34 1.95
Φ Vc (kN) 0 0 0
Vs (kN) 6.68 4.82 22.84
Aoh (sqmm) - - -
At (sqmm/m) - - -
Av (sqmm/m) 462.56 462.56 670.92
Tu (kNm) 0.03 0.03 0.03
At Torsion (sqmm/m) 0 0 0
Av Total Reqd (sqmm/m) 462.56 462.56 670.92
Asv Reqd (sqmm/m) 462.56 462.56 462.56
For Sway Shear
VD+L (kN) 4 2.97 4
Mh (kNm) 13.58 0 12.63
Ms (kNm) 13.58 0 13.58
Sway-Right (kN) 5.71 6.74 13.71
Sway-Left (kN) 14.05 13.02 6.52
Vu-Sway (kN) 14.05 13.02 13.71
Vud (kN) 14.05 13.02 13.71
Φ Vc Sway(kN) 0 0 0
Vs Sway(kN) 23.42 21.7 22.84
Asv Reqd Sway(sqmm/m) 687.8 637.37 670.92
Asv Reqd Final = max (Asv 687.8 637.37 670.92
Reqd , Asv Reqd Sway )
(sqmm/m)
Legs 2 2 2
Stirrup Rebar 10 10 10
SCalc (mm) 75 75 75
SPrv (mm) 75 75 75
Av Total Prv (sqmm/m) 2094.4 2094.4 2094.4

Maximum Spacing Criteria

Basic
                Spc1 = 75 mm
                Spc2 = 300 mm
For Torsion
                (X1 = 230, Y1 = 130)
                Spc3 = 300 mm
                Spc4=(X1+Y1)/4 = 90 mm

For Ductility (Special Frames)

       Left Section,  Right Section

= 72 mm
Spc5 = 6 x Small Longitudinal Dia
              Spc6 = d / 4 = 38 mm
              Spc7 = 150 mm
             Provided Spacing = 75 mm

       Mid Section
              Provided Spacing = 75 mm

Skin reinforcement

Beam Width = 300 mm

Beam Depth = 200 mm
Depth = 200 <= 900,    Hence Skin Reinforcement is not required.