0% found this document useful (0 votes)
48 views1 page

Aisles and Passageways Safety Checklist

The document lists 12 points to check regarding aisles, walkways, and passageways. It checks that they are clear, marked appropriately, have non-slip surfaces if wet, holes are repaired or covered, there is safe clearance around equipment, materials won't interfere, spills are cleaned, changes in direction or elevation are identifiable, they are arranged safely near hazards, adequate headroom is provided, and guardrails or bridges are used for hazards.

Uploaded by

FAISAL RAZA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
48 views1 page

Aisles and Passageways Safety Checklist

The document lists 12 points to check regarding aisles, walkways, and passageways. It checks that they are clear, marked appropriately, have non-slip surfaces if wet, holes are repaired or covered, there is safe clearance around equipment, materials won't interfere, spills are cleaned, changes in direction or elevation are identifiable, they are arranged safely near hazards, adequate headroom is provided, and guardrails or bridges are used for hazards.

Uploaded by

FAISAL RAZA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

S.

No Points to be Checked No Yes N/A Remarks


1 Are aisles and passageways kept clear?            
2 Are aisles and walkways marked as appropriate?            
3 Are wet surfaces covered with non-slip materials?            
4 Are holes in the floor, sidewalk or other walking surface
repaired properly, covered or otherwise made safe?            

5 Is there safe clearance for walking in aisles where motorized or


mechanical handling equipment is operating?            

6 Are materials or equipment stored in such a way that sharp


projectives will not interfere with the walkway?            
7 Are spilled materials cleaned up immediately?            
8
Are changes of direction or elevations readily identifiable?            

9 Are aisles or walkways that pass near moving or operating


machines, welding operations or similar operations arranged so
employees will not be subjected to potential hazards?            
10 Is adequate headroom provided for the entire length of any
aisle or walkway?            

Are standard guardrails provided wherever aisle or walkway


11 surfaces are elevated more than 30 inches above any adjacent
floor or the ground?            
12 Are bridges provided over conveyors and similar hazards?            

You might also like