Scribd
Upload
51 views4 pages

94 Delica Fuel Filter Modification Guide

This document outlines a fuel filter modification for a 1994 Delica that has been successfully used for two years without issues. The process involves removing the battery, sensor plug, and fuel lines, then attaching an aluminum plate to secure the new fuel filter housing. The instructions include marking, cutting, and extending wires, as well as securing everything in place with zip ties.

Uploaded by

Llewellyn Oliver
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
51 views4 pages

94 Delica Fuel Filter Modification Guide

This document outlines a fuel filter modification for a 1994 Delica that has been successfully used for two years without issues. The process involves removing the battery, sensor plug, and fuel lines, then attaching an aluminum plate to secure the new fuel filter housing. The instructions include marking, cutting, and extending wires, as well as securing everything in place with zip ties.

Uploaded by

Llewellyn Oliver
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CHRIS FUEL FILTER MOD

this is my fuel filter mod for my 94 delica I have had it for two years and no problem at all

remove the battery


remove the sensor plug
undo the fuel lines ( i marked the pipe with a marker on the housing and the corresponding pipe
from tank so as not to put them on back to front )
i used a piece of aluminium 300mm x 25mm
i bolted it on to the bolt that holds the cable above the master cylinder
the other end is bolted to the bracket for the wiper arms
mark the holes from the original bracket onto the 300mm plate
you need to make to L shaped brackets to bolt the housing to the flat plate
cut the plug off the sensor and extend the wires and rejoin to the plug
run the two fuel lines across the firewall to the fuel pipes and [Link] it all up bleed the fuel
filter and that is it

the bleed valve is pointing to the back but it is still easy to get to

I used zip ties across the back to hold wires and fuel lines up

You might also like