Scribd
Upload
297 views1 page

SAP2000 Steel Design Analysis Report

The document is a report from SAP2000 software summarizing the stress check results for frame 4307 with a section of GB-HW300X300X10X15. It finds the section meets all design limits for axial force, bending moments, shear, and torsion based on the specified load combinations and material properties. Forces and moments are calculated at location 8.000m and demand to capacity ratios are all below the limit of 1.000.

Uploaded by

chirathip vasuvattakul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
297 views1 page

SAP2000 Steel Design Analysis Report

The document is a report from SAP2000 software summarizing the stress check results for frame 4307 with a section of GB-HW300X300X10X15. It finds the section meets all design limits for axial force, bending moments, shear, and torsion based on the specified load combinations and material properties. Forces and moments are calculated at location 8.000m and demand to capacity ratios are all below the limit of 1.000.

Uploaded by

chirathip vasuvattakul
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

SAP2000 Steel Design Project

Job Number
Engineer

Eurocode 3-2005 STEEL SECTION CHECK


Combo : 1.35DL+1.5LL+0.9Wy+FhnY
Units : KN, m, C

Frame : 4307 Design Sect: GB-HW300X300X10X15


X Mid : 52.232 Design Type: Column
Y Mid : 16.232 Frame Type : Moment Resisting Frame
Z Mid : 13.919 Sect Class : Class 2
Length : 9.673 Major Axis : 0.000 degrees counterclockwise from local 3
Loc : 8.000 RLLF : 1.000

Area : 0.012 SMajor : 0.001 rMajor : 0.130 AVMajor: 0.003


IMajor : 2.050E-04 SMinor : 4.507E-04 rMinor : 0.075 AVMinor: 0.008
IMinor : 6.760E-05 ZMajor : 0.001 E : 200000000.00
Ixy : 0.000 ZMinor : 6.825E-04 Fy : 215000.000

STRESS CHECK FORCES & MOMENTS


Location P M33 M22 V2 V3 T
8.000 -110.172 6.759 -5.337 4.747 -3.190 0.000

PMM DEMAND/CAPACITY RATIO


Governing Total P MMajor MMinor Ratio Status
Equation Ratio Ratio Ratio Ratio Limit Check
(6.2) 0.110 = 0.047 + 0.024 + 0.040 1.000 OK

AXIAL FORCE DESIGN


Ned Nc,Rd Nt,Rd Nb33,Rd Nb22,Rd
Force Capacity Capacity Major Minor
Axial -110.172 2353.273 2353.273 2353.273 2353.273

MOMENT DESIGN
Med Mc,Rd Mv,Rd Mb,Rd
Moment Capacity Capacity Capacity
Major Moment 6.759 286.857 286.857 286.857
Minor Moment -5.337 133.398 133.398

K L k kzy kyz C1
Factor Factor Factor Factor Factor Factor
Major Moment 1.000 0.414 1.006 0.997 1.000
Minor Moment 1.000 0.414 1.024 0.614

SHEAR DESIGN
Ved Vc,Rd Stress Status Ted
Force Capacity Ratio Check Torsion
Major Shear 4.747 338.537 0.014 OK 0.000
Minor Shear 3.190 846.343 0.004 OK 0.000

SAP2000 v14.1.0 - Fil[Link]\PROJECT\SJM\Calc\161029_SJM_Calc_Shoring tower_Rev1\Bak data\SAP\161028_SJM_Dome-shoring


¸Ñ¹ÇÒ¤Á 24, 2559 11:47
tower -V3

You might also like