Salt Mist Test Report
This laboratory is accredited in accordance with the recognized International Standard
ISO/IEC 17025:2017. This accreditation demonstrates technical competence for a
defined scope and the operation of a laboratory quality management system (refer to the
joint ISO-ILAC-IAF Communiqué dated January 2009).
Standard Used： ASTM B117-19:
Standard Practice for Operating Salt Spray (Fog)
Apparatus
Date of Issue： October 7, 2020
Report Number： GO20082502
Reviewer：____________________________
1. The test results of this report relate only to the tested sample identified in this report.
2. This report shall not be reproduced, in full or in portion, except for having written approval from Great One
Global Certification Co. Ltd.
3. The data in report cannot be used for advertisement, publication and promotion.
4. Our laboratory is accredited to ISO 17025. It is our decision rule that the measurement uncertainty of the
test results will not be evaluated.
[Link]
Test Report
Applicant’s Name ....................... : AI Technology Inc
Address ...................................... : 70 Washington Rd, Princeton Junction, NJ 08550, USA
Manufacturer’s Name ................. : AI Technology Inc
Address ....................................... 70 Washington Rd, Princeton Junction, NJ 08550, USA
Testing Laboratory ..................... : Great One Global Certification Co., Ltd.
Address ...................................... : 7F-5, No.122, Qiaohe Rd., Zhonghe Dist., New Taipei
City 235, Taiwan (R.O.C.)
Tested by ................................... : Van Wang
Reported by ............................... : Van Wang
Approved by ............................... : David Yuan
Test specification:
Standard .................................... : ASTM B117-19: Standard Practice for Operating Salt
Spray (Fog) Apparatus
Test Item Description:
Product Name ............................. : Fluoroseal
TradeMark .................................. : Fluoroseal ®
Series model ............................. : SC7130-CC
Electrical Ratings ....................... : N/A
GO20082502 [Link] Page:1/7
Summary of testing:
Testing
Date of receipt of test item ........................... : September 18,2020
Date(s) of performance of test ...................... : September 18,2020 to September 28,2020
Description of model series: N/A
Remark
Thickness of the coating 25 μm
GO20082502 [Link] Page:2/7
Test Condition
Standard: ASTM B117-19 Results
Neutral salt solution spray
Test category Salt solution: 5±1% salt solution
concentration
Pre-test: Alcohol clean
Sample clean method
Post-test: water wash
Sample count. 1
Location angle Horizontally
Spray chamber temp 35 ± 2 ℃ See page 4 to page 6
Pressure air chamber temp. 47.0 ℃
Moisture spray condition 2.0 ml /80 cm²/ h
240 hours of salt fog exposure
Test procedure
Total : 240 hours
According to test result and
Test results based on standard, no corrosion
nor paint off on the samples
GO20082502 [Link] Page:3/7
Photo
Sample
GO20082502 [Link] Page:4/7
240 hours of salt fog exposure
GO20082502 [Link] Page:5/7
Test result(water wash)
GO20082502 [Link] Page:6/7
Equipment List
No. [Link] Equipment Type Manufacturer /Model Cal. Date Due data
Dongguan Pinsheng
1 L053 Salt spray tester Test Instruments Co., 2020-5-21 2021-5-20
Ltd. / PS-90
~ End of Report ~
GO20082502 [Link] Page:7/7
