Product Information
RENOLIT EP GREASES
High quality, multi-use EP greases
Description Advantages/Benefits
RENOLIT EP 1 and RENOLIT EP 2 greases are RENOLIT EP GREASES are lead-free
multi-purpose lubricants suitable for use in high Five grades available in the range allowing selection
pressure greasing equipment. Their pumpability of the appropriate grade for the equipment in use
ensures regular and easy flow through the fine bore RENOLIT EP GREASES contain extreme pressure
pipes used in automatic systems. RENOLIT EP 2 additives to allow use in heavy load conditions
may be used as a general industrial and automotive Formulated to contain anti-rust additives to protect
lubricant. It can be used for product rationalisation for against corrosion
many applications. RENOLIT EP 2 Complies with Anti-oxidants included to prolong product life
British Timken Recommendations 2891
RENOLIT EP 0 grease will provide for an efficient
level of pumpability in small bore systems, which NOTE
means that even when the point of application is
remote from the motive source there will be no RENOLIT EP GREASES are available in five
significant pressure differential to overcome. This NLGI consistencies 000, 00, 0,1 and 2. The structure
factor is critical when selecting the correct lubricant to of the products is based upon a conventional lithium
be supplied via conventional and modern automatic metallic soap, which will ensure compatibility with
lubrication systems. other lithium greases of a similar nature. RENOLIT
RENOLIT EP 00 is a semi-fluid grease also EP GREASES contain extreme pressure, anti-rust
recommended for automatic greasing units and as an and anti-oxidation additives.
alternative to industrial gear oils to prevent leakage.
RENOLIT EP 000 is a semi-fluid grease
recommended for the lubrication of commercial Shelf Life
vehicles and plant served by automatic greasing units.
It may also be recommended as an alternative to The minimum shelf life is 36 months if the product is
industrial gear oils in enclosed gearboxes where high properly stored between 0ºC and 40ºC in its
leakage rates are experienced. unopened original container in a dry place. The
indication of a minimum shelf life does not include any
guarantee of durability.
Application
RENOLIT EP GREASES are high specification,
general purpose greases suitable for many industrial
and automotive applications.
April 2013 GDUK Page 1 of 2
FUCHS LUBRICANTS (UK) PLC Tel +44-1782 -20 37 00
New Century Street, Hanley Fax +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU
[email protected]Health, Safety and Environment - information is provided for products in the relevant Safety Data Sheet. This provides guidance on potential hazards, precautions and first-aid
measures, together with environmental effects and disposal of used products.
While the information and figures given here are typical of current production and conform to specification, minor variations may occur. No warranty expressed or implied is given
concerning the accuracy of the information or the suitability of the products
Product Information
CHARACTERISTICS: RENOLIT EP GREASES
RENOLIT RENOLIT RENOLIT RENOLIT RENOLIT
EP 000 EP 00 EP 0 EP 1 EP 2
Characteristics Unit Test
Method
Colour Translucent brown
Texture Smooth
Thickening agent Lithium soap
Drop point ºC Not Applicable 177 min. 182 min. 177 min. ISO2176
Worked penetration 1/10 mm 445-475 400-430 355-385 310-340 265-295 ISO2137
DIN Classification KP 000 KP 00 KP 0 KP 1 KP 2 DIN 51 825
K-30 K-30 K-30 K-30 K-20
ISO Classification L-XBBEB L-XBBEB L-XCBEB L-XCCEB L-XBCEB ISO 6743-9
000 00 0 1 2
NLGI grade 000 00 0 1 2
Water content %wt 0.2 max. IP74
Acidity on base grease as oleic %wt 0.2 max. IP37
Alkalinity on base grease as LiOH %wt 0.2 max. IP37
Oil separation 7 days at 40ºC %wt Not Applicable 9.0 7.0 max. IP121
Oxidation stability maximum pressure drop IP142
100 hours bar 0.7
Dynamic anti-rust test distilled water Not Applicable 0,0 0,0 IP220
Copper corrosion 24 hr at 40ºC Passes IP112
4 ball weld load N 2453 IP239
Sphere of use ºC -30 to -30 to -30 to -30 to -25 to
+100 +100 +110 +120 +130
Fluid Component
Type Highly refined mineral oil
Kinematic viscosity ISO3104
at 40ºC mm2/s 230.0 230.0 230.0 230.0 230.0
at 100ºC mm2/s 17.50 17.50 17.50 17.50 17.50
April 2013 GDUK Page 2 of 2
FUCHS LUBRICANTS (UK) PLC Tel +44-1782 -20 37 00
New Century Street, Hanley Fax +44-1782 -20 20 73
GB-Stoke-on-Trent, Staffordshire, ST1 5HU
[email protected]Health, Safety and Environment - information is provided for products in the relevant Safety Data Sheet. This provides guidance on potential hazards, precautions and first-aid
measures, together with environmental effects and disposal of used products.
While the information and figures given here are typical of current production and conform to specification, minor variations may occur. No warranty expressed or implied is given
concerning the accuracy of the information or the suitability of the products
