Pressure

Differential pressure gauge

For the process industry, all-metal media chamber
Models 732.31, 733.31, 732.51 and 733.51
WIKA data sheet PM 07.05

k for further approvals,

see page 7

Applications

■ For gaseous and liquid aggressive media that are

not highly viscous or crystallising, also in aggressive
environments
■ Pump monitoring and control
■ Filter monitoring
■ Level measurement on closed vessels

Special features
■ Differential pressure measuring ranges from 0 ... 16 mbar
to 0 ... 40 bar [0 ... 0.23 to 0 ... 580 psi]
■ High working pressure (static pressure) up to 40 bar
[580 psi]
■ High overload safety up to 40 bar [580 psi]
■ Models 732.31 and 733.31: Case with safety level “S3” per
EN 837
■ All-welded media chamber

Differential pressure gauge model 732.51

Description
These differential pressure gauges are made of highly The low-temperature version POLARgauge® allows opera-
corrosion-resistant stainless steel and feature an all-metal tion with ambient temperatures down to -70 °C [-94 °F].
media chamber to ensure long-term leak tightness (no
elastomer sealing elements). Casings with safety level “S3” are fitted with a non-splintering
window, a solid baffle wall between measuring system and
A high overload safety is achieved by the all-metal construc- dial and a blow-out back. In the event of a failure, the operator
tion and the close-fitting design of the diaphragm measuring is protected at the front side, as media or components can
element. only be ejected via the back of the case.

The use of high-quality stainless steel materials and the Scale ranges of 0 ... 16 mbar to 0 ... 40 bar [0 ... 0.23 to
robust design are geared to applications in the chemical 0 ... 580 psi] ensure the measuring ranges required for a wide
and process engineering industries. Thus the instrument is variety of applications.
suitable for liquid and gaseous media, also in aggressive
environments.

WIKA data sheet PM 07.05 ∙ 09/2021 Page 1 of 10

Data sheets showing similar products:

Differential pressure gauge, high overload safety up to 40, 100 or 400 bar; model 732.14; see data sheet PM 07.13
Functionality

Case

Instrument pointer

Dial

Movement

Link

Media chamber, ⊖ side

Metal bellows, ⊖ side

Diaphragm element

Metal bellows, ⊕ side

14503426.01
Media chamber, ⊕ side

⊖ side ⊕ side

Design and operating principle

■ Media chambers of the ⊕ and ⊖ side are separated by the diaphragm element

■ Metal bellows isolate the media chambers from the atmosphere

■ The pressure difference between ⊕ and ⊖ side leads to an axial pressure element deflection

■ The deflection is transmitted to the movement via the link

■ The movement converts the deflection into a pointer rotation

Overload safety
Diaphragm elements have a relatively large actuating force and, due to the annular clamping of the element, they are less
sensitive to vibration in comparison with Bourdon tubes. Diaphragm elements can be subject to a higher overload of up to 10
times the full scale value, up to a max. of 40 bar, through load take-up points with metallic seating.

Overview of versions
Model Case design With case filling Low-temperature version
Safety level “S3” Safety level “S1” POLARgauge®
732.31 x Selectable
733.31 x x Selectable
732.51 x Selectable
733.51 x x Selectable

The above-mentioned versions can, optionally, be ordered with Ex approval.

→ For approvals and certificates, see page 7

WIKA data sheet PM 07.05 ∙ 09/2021 Page 2 of 10

Specifications

Basic information
Standard
Pressure measuring instruments for differential DIN 16003
pressure
→ For information on the “Selection, installation, handling and operation of pressure gauges”, see Technical information IN 00.05.
Nominal size (NS) ■ Ø 100 mm [4"]
■ Ø 160 mm [6"]

Window Laminated safety glass

Connection location Lower mount (radial)
Other connection locations on request
Case
Design ■ Safety level “S1” per EN 837-1: With blow-out device
■ Safety level “S3” per EN 837-1: With solid baffle wall and blow-out back

Material Stainless steel 1.4571 (316 Ti)

Case filling ■ Without
■ Silicone oil

Instruments with case filling with compensating valve to vent case.

Venting of the media chambers
Span ≤ 0.25 bar [3.63 psi] With venting
Span > 0.25 bar [3.63 psi] ■ Without
■ With venting

Movement Stainless steel

1) Ingress protection IP65 for instruments with case filling

Measuring element
Type of measuring element Diaphragm element
Material
Span ≤ 0.25 bar [3.63 psi] Stainless steel 1.4571 (316 Ti)
Span > 0.25 bar [3.63 psi] NiCr alloy (Inconel)

Accuracy specifications
Accuracy class ■ 1.6
■ 1.0
■ 2.5

Zero point setting

Instruments with case filling 1) ■ Without
■ External setting

Instruments without case filling ■ Without

■ Setting by means of adjustable pointer

Influence of static pressure

Span ≤ 0.25 bar [3.63 psi] ±0.3 %/1 bar [14.5 psi]
Span > 0.25 bar [3.63 psi] ±0.04 %/1 bar [14.5 psi]
Temperature error On deviation from the reference conditions at the measuring system:
≤ ±0.5 % per 10 °C [≤ ±0.5 % per 18 °F] of full scale value
Reference conditions
Ambient temperature +20 °C [+68 °F]

1) Except for model 733.31, setting possible by means of adjustable pointer

WIKA data sheet PM 07.05 ∙ 09/2021 Page 3 of 10

Scale ranges

mbar psi
0 ... 16 1) 0 ... 400 0 ... 6 0 ... 100
0 ... 25 0 ... 600 0 ... 8 0 ... 150
0 ... 40 0 ... 1,000 0 ... 10 0 ... 160
0 ... 60 0 ... 1,100 0 ... 15 0 ... 200
0 ... 100 0 ... 1,200 0 ... 30 0 ... 250
0 ... 160 0 ... 1,600 0 ... 60 0 ... 300
0 ... 250 0 ... 2,500
0 ... 300 kPa
0 ... 1.6 1) 0 ... 160
bar 0 ... 2.5 0 ... 250
0 ... 0.25 0 ... 7 0 ... 4 0 ... 300
0 ... 0.4 0 ... 10 0 ... 6 0 ... 400
0 ... 0.6 0 ... 14 0 ... 10 0 ... 600
0 ... 1 0 ... 16 0 ... 16 0 ... 700
0 ... 1.6 0 ... 20 0 ... 25 0 ... 800
0 ... 2.5 0 ... 25 0 ... 30 0 ... 1,000
0 ... 4 0 ... 30 0 ... 40 0 ... 1,400
0 ... 6 0 ... 40 0 ... 60 0 ... 1,600
0 ... 100 0 ... 2,500

Vacuum and +/- scale ranges

mbar psi
-16 ... 0 1) -8 ... +8 -15 ... 0 inHg -30 inHg ... +100
-25 ... 0 -10 ... +15 -30 ... 0 inHg -30 inHg ... +160
-40 ... 0 -20 ... +20 -30 inHg ... +15 -30 inHg ... +200
-60 ... 0 -30 ... +30 -30 inHg ... +30 -30 inHg ... +300
-100 ... 0 -50 ... +50 -30 inHg ... +60
-160 ... 0 -80 ... +80
-250 ... 0 -125 ... +125 kPa
-400 ... 0 -200 ... +200 -60 ... 0 -100 ... +100
-600 ... 0 -300 ... +300 -100 ... 0 -100 ... +150
-1,000 ... 0 -500 ... +500 -2 ... +4 -100 ... +200
-1,100 ... 0 -600 ... +400 -4 ... +6 -100 ... +300
-1,200 ... 0 -1,000 ... +600 -6 ... +4 -100 ... +400
-6 ... +10 -100 ... +500
bar -10 ... +6 -100 ... +700
-0.6 ... 0 -1 ... +5 -10 ... +15 -100 ... +900
-1 ... 0 -1 ... +9 -15 ... +15 -100 ... +1,000
-1 ... +0.6 -1 ... +15 -20 ... +40 -100 ... +1,500
-1 ... +1.5 -1 ... +24 -100 ... +60 -100 ... +2,400
-1 ... +3

1) Scale angle approx. 180°, with all other scale ranges the scale angle is 270°.

Other scale ranges on request

WIKA data sheet PM 07.05 ∙ 09/2021 Page 4 of 10

Further details on: Scale ranges
Unit ■ mbar
■ bar
■ psi
■ kPa
■ MPa
■ mmH2O
■ inH2O
■ kg/cm2
■ oz/cm2

Other units on request

Overload safety and max. working pressure The possibility of selection depends on the scale range.
(static pressure) → See separate table
Dial
Scale layout ■ Single scale
■ Dual scale

Scale colour Single scale Black

Dual scale Black/Red
Material Aluminium
Customer-specific version ■ Without
■ With special scale, e.g. linear pressure or square root incrementation

Other scales, e.g. with red mark, circular arcs or circular sectors, on request
→ Alternatively, adhesive label set for red and green circular arcs; see data sheet AC
08.03
Pointer
Instrument pointer With case filling Standard pointer, aluminium, black
Without case filling Adjustable pointer, aluminium, black
Mark pointer/drag pointer ■ Without
■ Mark pointer on bayonet ring, adjustable

Pointer stop pin ■ Without

■ At 6 o'clock

Overload safety and max. working pressure (static pressure)

Scale range Overload safety / max. working pressure (static)
Either side max.
0 ... 16 to 0 ... 40 mbar [0 ... 0.23 to 0 ... 0.58 psi] ■ 2.5 bar [36.3 psi] / 2.5 bar [36.3 psi]
■ 2.5 bar [36.3 psi] / 6 bar [87 psi] 1)

0 ... 60 to 0 ... 250 mbar [0 ... 0.87 to 0 ... 3.6 psi] ■ 2.5 bar [36.3 psi] / 6 bar [87 psi]
■ 6 bar [87 psi] / 10 bar [145 psi]

0 ... 400 mbar [0 ... 5.8 psi] ■ 4 bar [58 psi] / 25 bar [363 psi]
■ 40 bar [580 psi] / 40 bar [580 psi]

0 ... 0.6 bar [0 ... 8.7 psi] ■ 6 bar [87 psi] / 25 bar [363 psi]
■ 40 bar [580 psi] / 40 bar [580 psi]

0 ... 1 bar [0 ... 14.5 psi] ■ 10 bar [145 psi] / 25 bar [363 psi]
■ 40 bar [580 psi] / 40 bar [580 psi]

0 ... 1.6 bar [0 ... 23.2 psi] ■ 16 bar [232 psi] / 25 bar [363 psi]
■ 40 bar [580 psi] / 40 bar [580 psi]

0 ... 2.5 to 0 ... 40 bar [0 ... 36.3 to 0 ... 580 psi] ■ 25 bar [363 psi] / 25 bar [363 psi]
■ 40 bar [580 psi] / 40 bar [580 psi]

WIKA data sheet PM 07.05 ∙ 09/2021 Page 5 of 10

 Process connection
Standard ■ EN 837-1
■ ANSI/B1.20.1

→ Valve manifolds for an instrument hook-up, see “Accessories and spare parts”.
Size
EN 837-1 ■ 2 x G ¼, female thread
■ 2 x G ½ B, male thread

ANSI/B1.20.1 ■ 2 x ½ NPT, male thread

Restrictor ■ Without
■ ∅ 0.6 mm [0.024"], stainless steel
■ ∅ 0.3 mm [0.012"], stainless steel

Material (wetted)
Media chambers with process connection Stainless steel 1.4571 (316 Ti)
Venting of the media chambers Stainless steel 1.4571 (316 Ti)
Diaphragm element Span ≤ 0.25 bar [3.63 psi] Stainless steel 1.4571 (316 Ti)
Span > 0.25 bar [3.63 psi] NiCr alloy (Inconel)
Bellows Stainless steel 1.4571 (316 Ti)

Other process connections on request

Operating conditions
Medium temperature range ■ -20 ... +100 °C [-4 ... +212 °F]
■ -20 ... +120 °C [-4 ... +248 °F]
■ -20 ... +150 °C [-4 ... +284 °F]

Ambient temperature range ■ -20 ... +60 °C [-4 ... +140 °F]
■ -40 ... +60 °C [-40 ... +140 °F] 1)
■ -70 ... +60 °C [-94 ... +140 °F] for low-temperature version POLARgauge®

Storage temperature range -20 ... +60 °C [-4 ... 140 °F]
Pressure limitation
Steady Full scale value
Fluctuating 0.9 x full scale value
Ingress protection per IEC/EN 60529 ■ IP54
■ IP65 2)

1) Only selectable in combination with silicone oil case filling

2) Ingress protection IP65 for instruments with case filling

Other versions
■ Oil- and grease-free
■ For oxygen, oil- and grease-free
■ Silicone-free
■ Per NACE 1) MR 0175 / ISO 15156, use in H₂S-containing environments in oil and gas production
■ Per NACE 1) MR 0103 / ISO 17945, metals resistant to sulfide stress cracking
■ With pre-volume deflagration flame arrester 2) for connection to zone 0 (EPL Ga); model 910.21; see data sheet AC 91.02

1) General information about NACE standards, see data sheet IN 00.21

2) Only for instruments with Ex approval

WIKA data sheet PM 07.05 ∙ 09/2021 Page 6 of 10

Approvals
Logo Description Region
EU declaration of conformity European Union
EMC directive
Low voltage directive
RoHS directive
- CRN Canada
Safety (e.g. electr. safety, overpressure, ...)

Optional approvals
Logo Description Region
EU declaration of conformity European Union
ATEX directive
Hazardous areas
Gas II 2G Ex h IIC T6 ... T1 Gb X
Dust II 2D Ex h IIIC T85 °C T450 °C Db X

EAC Eurasian Economic

Community
EMC directive
Low voltage directive
Hazardous areas
Ex Ukraine Ukraine
Hazardous areas
KCs Korea
Hazardous areas
PAC Russia Russia
Metrology, measurement technology
PAC Kazakhstan Kazakhstan
Metrology, measurement technology
- MChS Kazakhstan
Permission for commissioning
PAC Belarus Belarus
Metrology, measurement technology
PAC Ukraine Ukraine
Metrology, measurement technology
- PAC China China
Metrology, measurement technology

Certificates (option)
Certificates
Certificates ■ 2.2 test report per EN 10204 (e.g. state-of-the-art manufacturing, indication accuracy)
■ 3.1 inspection certificate per EN 10204 (e.g. material proof for wetted metal parts, indication
accuracy)
Recommended recalibration interval 1 year (dependent on conditions of use)

→ For approvals and certificates, see website

WIKA data sheet PM 07.05 ∙ 09/2021 Page 7 of 10

Dimensions in mm [in]
Process connection: 2 x G ¼, female thread

14503466.01
Mounting holes

Models 732.31 and 733.31

NS Span G Dimensions in mm [in] Weight in

a b D1 D2 d e h ±1 H kg [lb]

100 ≤ 0.25 bar [3.63 psi] G¼ 23.5 59 101 99 140 17.5 160 90 2.70
[4"] [0.96] [2.32] [3.98] [3.90] [5.51] [0.69] [6.30] [3.54] [5.95]
> 0.25 bar [3.63 psi] G¼ 23.5 59 101 99 78 17.5 170 87 1.90
[0.96] [2.32] [3.98] [3.90] [3.07] [0.69] [6.69] [3.43] [4.12]
160 ≤ 0.25 bar [3.63 psi] G¼ 23.5 59 161 159 140 17.5 190 120 3.40
[6"] [0.96] [2.32] [6.34] [6.26] [5.51] [0.69] [7.48] [4.72] [7.5]
> 0.25 bar [3.63 psi] G¼ 23.5 59 161 159 78 17.5 200 117 2.40
[0.96] [2.32] [6.34] [6.26] [3.07] [0.69] [7.87] [4.61] [5.29]

Models 732.51 and 733.51

NS Span G Dimensions in mm [in] Weight in

a b D1 D2 d e h ±1 H kg [lb]

100 ≤ 0.25 bar [3.63 psi] G¼ 15.5 49.5 101 99 140 17.5 160 90 2.70
[4"] [0.61] [1.95] [3.98] [3.90] [5.51] [0.69] [6.30] [3.54] [5.95]
> 0.25 bar [3.63 psi] G¼ 15.5 49.5 101 99 78 17.5 170 87 1.90
[0.61] [1.95] [3.98] [3.90] [3.07] [0.69] [6.69] [3.43] [4.12]
160 ≤ 0.25 bar [3.63 psi] G¼ 15.5 49.5 161 159 140 17.5 190 120 3.40
[6"] [0.61] [1.95] [6.34] [6.26] [5.51] [0.69] [7.48] [4.72] [7.5]
> 0.25 bar [3.63 psi] G¼ 15.5 49.5 161 159 78 17.5 200 117 2.40
[0.61] [1.95] [6.34] [6.26] [3.07] [0.69] [7.87] [4.61] [5.29]

WIKA data sheet PM 07.05 ∙ 09/2021 Page 8 of 10

Accessories and spare parts

Model Description Order number

910.33 Adhesive label set for red and green circular arcs -
→ See data sheet AC 08.03
NS 100 [4"] 14238945
NS 160 [6"] 14228352

910.17 Sealings On request

→ See data sheet AC 09.08

IV304 3-valve manifold 37105018

Process connection / instrument connection:
2 x G ½, male thread / 2 x G ¼, pressure screw
3-valve manifold 48752900
Process connection / instrument connection:
2 x ½ NPT, male thread / 2 x G ¼, pressure screw
IV504 5-valve manifold 2020389
Process connection / instrument connection:
2 x G ½, male thread / 2 x G ¼, pressure screw
5-valve manifold 81640336
Process connection / instrument connection:
2 x ½ NPT, male thread / 2 x G ¼, pressure screw
Valve manifolds for differential pressure measuring instruments On request
→ See data sheet AC 09.23
- Instrument mounting bracket for wall or pipe mounting 1282999
Steel, silver painted
Instrument mounting bracket for wall or pipe mounting 1473700
Stainless steel

WIKA data sheet PM 07.05 ∙ 09/2021 Page 9 of 10

 Accessories

Dimensions in mm [in]

Representation with mounting bracket for wall or pipe mounting and fitted 5-valve manifold

14503466.01
≤

NS Scale range Dimensions in mm [in]

F C1 C2
100 [4"] ≤ 0.25 bar [3.63 psi] 114 [4.49] 96 [3.78] 118 [4.65]
> 0.25 bar [3.63 psi] 114 [4.49] 66 [2.60] 88 [3.46]
160 [6"] ≤ 0.25 bar [3.63 psi] 144 [5.67] 96 [3.78] 118 [4.65]
> 0.25 bar [3.63 psi] 144 [5.67] 66 [2.60] 88 [3.46]

Ordering information
Model / Nominal size / Scale range / Scale layout (linear pressure or square root incrementation) / Max. working pressure
(static pressure) ... bar / Process connection / Connection location / Options

© 10/2008 WIKA Alexander Wiegand SE & Co. KG, all rights reserved.
The specifications given in this document represent the state of engineering at the time of publishing.
We reserve the right to make modifications to the specifications and materials.
09/2021 EN

WIKA data sheet PM 07.05 ∙ 09/2021 Page 10 of 10

WIKA Alexander Wiegand SE & Co. KG

Alexander-Wiegand-Straße 30
63911 Klingenberg/Germany
Tel. +49 9372 132-0
Fax +49 9372 132-406
[email protected]
www.wika.de