Frequently Asked Questions about the FE Exam

Disclaimer: The responses/opinions below are based on the experiences of Dr. Chris Pascual.
Please refer to the California Board for Professional Engineers and Land Surveyors
([Link] for the most current information.

General Information and Application Questions

1. What is the Fundamentals of Engineering (FE) Exam?

This is an 8-hour exam that reviews basic math and engineering knowledge. After your
pass the FE exam, you are certified as an Engineer-in-Training (EIT). This certification is
the first step required under California law towards becoming licensed as a professional
engineer.

2. Why should I take the exam?

Many mechanical engineering jobs do not require you to be a licensed professional

engineer. However, small companies particularly in the construction industry do require
you to have a license. Also, if you wish to start your own company or pursue consulting,
a license is needed. Since you are best prepared for the FE exam while a student, there is
no harm in taking the exam while a student (except financial cost of the exam). At some
later date, if you need to get your license, you have already completed this first hurdle.

3. Should I take the exam as a student or wait until I am a practicing engineer?

You will never be as prepared for the exam as when you are a student. The exam tests
your basic knowledge on a large number of subjects. Once you start working, you will
forget much of the information in many of these subjects; therefore, you would need to
study more if you take the exam after you graduate.

4. When should I take the exam?

I recommend taking the exam as close to graduation as possible because you will have
been exposed to more topics by that time. For example, engineering economics is not
covered for mechanical engineering students until ME 440 which is taken in your last
year.

5. When am I eligible to take the exam?

Applicants must have completed three years of course work in a Board-approved

engineering curriculum (any curriculum approved by the Engineering Accreditation
Commission [EAC] of the Accreditation Board for Engineering and Technology
[ABET]). The mechanical engineering program is ABET accredited at Cal Poly (all Cal
 Poly engineering programs are accredited except for Biomedical and General
engineering).

6. Does the application have to be received by the deadline?

No. The application must be post marked by the application deadline.

7. Can the application fee be waived?

No. The current fee is $100 and there is no aid available to offset the cost.

8. When is the FE Exam offered?

The FE exam is given in April and October of each year. Refer to the Board website for a
current examination schedule: [Link]

Studying for the Exam

9. Are there review sessions offered?

There are review sessions offered. The most economical are the ones offered by Chi
Epsilon ([Link] These review sessions sell out
therefore I recommend buying your ticket as soon as they are available. Please check the
Chi Epsilon website for more information.

10. Should I take the review sessions?

That is your decision. Most students have found them useful. Remember the review
sessions are just that, “review”. You will not learn the subject material at these sessions.
They will only refresh your memory.

11. How much should I study?

The more the better; but it is a large time commitment. By taking the exam as a student,
most of the material is relatively fresh in your mind. I find that many students just attend
the review sessions for their studying. Your goal should be to answer all the easy
questions in every subject and the more in-depth questions in your particular major. See
the exam specifications at [Link] for a list of
subjects covered on the FE exam.

12. Should I take the general or mechanical exam?

The vast majority of the mechanical engineering students take the general exam in the
afternoon instead of the mechanical exam. The general exam covers more non-ME topics
but at a more basic level. Overall, I feel that the general exam is easier. With that
comment, the pass rate on the mechanical exam is the same (or higher) than the general
 exam. Please review [Link] for the exam
specifications for each exam.

13. Can I get a FE Reference Manual to study from?

All mechanical engineering students will be given a free copy of the FE Reference
Manual in senior project class (ME 428). If you are registered for senior project class and
do not have a copy, ask your instructor.

Exam Day Questions

14. Is the test location listed on the admission ticket?

If taking the test at Cal Poly, the location is not listed (except to say Cal Poly). The
building and room locations will be published via email and word of mouth at the Chi
Epsilon review sessions. Ask your friends!

15. What calculator are you allowed to use?

Please visit [Link] or read the examinee

instructions carefully. Your calculator will be checked for compliance at the exam site.

16. Where is the help desk?

The help desk will generally be one of the exam rooms and it is open the afternoon prior
to the exam. The exact location and hours will be published via email (or at the Chi
Epsilon review sessions) when it is available.

17. What if I am missing my admission ticket?

Go to the help desk the day prior to the exam (see previous question). You can also call
the California Board toll free at 866-780-5370.

18. How important is the Examinee Instructions?

Please review these instructions carefully. The instructions give detailed descriptions
about what you can and cannot bring to the exam. You think the TSA is strict! Just wait
and see!

19. What if I have a question or problem not discussed here? Where can I get answers?

Call the California Board at 866-780-5370. They are administrators of the exam and have
the final say.