Provisional Technical Datasheet
Polypropylene Impact Co Polymer Injection Molding
Product Description: PP Block Co Polymer MI03 is recommended for
PP Block Co polymer MI03 is a heterophasic natural
Injection Molding applications such as:
colored high impact resistance grade produced
Industrial Moldings
with the latest Ineos Gas Phase polymerization
Furniture
Technology exhibiting following features:
Automotive components
High Impact Strength.
Good Stiffness
Medium flow for easy processing.
Typical Properties:
Sr. No. Properties Test Method Units Values*
Physical Properties
o
1 Melt Flow Index ( 230 C & 2.16 kg) ASTM D1238 g / 10 min 3.5
0 3
2 Density (23 C) ASTM D 1505 Gm/cm 0.90
Mechanical Properties
3 Tensile Strength @ Yield (50mm / min) ASTM D 638 MPa 28
4 Elongation @ Break (50mm / min) ASTM D 638 % 200
5 Flexural Modulus (1.3 mm/min) ASTM D790A MPa 1200
o
6 Notch Izod Impact Strength ( @ 23 C) ASTM D 256 J/m 150
7 Hardness (Rockwell) ASTM D 785 R Scale 75
Thermal Properties
o
8 Heat Deflection Temperature (0.46N/m2) ASTM D648 C 90
* Mechanical Properties tested on Injection molded specimen prepared in accordance with ASTM D 4101 and conditioned as per ASTM D 618
* Typical Values and not to be taken as specifications, values may change without any prior notice.
Recommended Processing Temperature: 180 – 230 0C
Disclaimer: OPaL assumes no liability whatsoever in respect of application, processing or any use made of the afore - mentioned information or products, or any consequence thereof.
The user undertakes all liability in respect of the application, processing or use of the afore - mentioned information or product, whose quality and other properties he shall verify, or any
consequence thereof. No liability whatsoever shall attached to any of the OPaL companies for any infringement of the rights owned or controlled by a third party in intellectual, industrial or
other property by reason of application, processing or use of the afore-mentioned information or products by the user.
Contact: ONGC Petro Additions Ltd., Polymer Marketing Group: 1st Floor, Omkara Complex, Sai Chowkdi, Manjalpur, Vadodara 390011, Gujarat,India
Telephone: +91 265 6192600, Fax: +91 265 6192666, Corporate Site: www.opalindia.in PARC/2016/03 - 00
Provisional Technical Datasheet
Regulatory Requirements:
PP Co Polymer grade MI03 shall meet the requirements stipulated in IS 10910 on 'Specification for Polypropylene and its
Copolymers for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated
in this grade shall meet the positive list of constituents as prescribed in IS 10909. The Grade and the additives incorporated
in it will also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers.
Storage & Handling:
Prevent PP Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be
o
dry, dust free and the Storage temperature should not exceed 50 C. Non - compliance to these precautionary measures can
lead to degradation of the product causing Color changes, Odor & inadequate product performance.
Health and Safety Information:
The product described herein may require precautions in handling and use because of toxicity, flammability, o
or other
consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this
material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for
the product
roduct under consideration for use.
Disclaimer: OPaL assumes no liability whatsoever in respect of application, processing or any use made of the afore - mentioned information or products, or any consequence thereof.
The user undertakes all liability in respect of the application, processing or use of the afore - mentioned information or product, whose quality and other properties he shall verify, or any
consequence thereof. No liability whatsoever shall attached to any of the OPaL companies for any infringement of the rights owned or controlled by a third party in intellectual, industrial or
other property by reason of application, processing or use of the afore-mentioned information or products by the user.
Contact: ONGC Petro Additions Ltd., Polymer Marketing Group: 1st Floor, Omkara Complex, Sai Chowkdi, Manjalpur, Vadodara 390011, Gujarat,India
Telephone: +91 265 6192600, Fax: +91 265 6192666, Corporate Site: www.opalindia.in PARC/2016/03 - 00
