Data Sheet

Highlights
• High-end Wiring Closet Switches
• Agile support for Extreme
Fabric Connect
• Advanced IPv4 and IPv6 Routing
• Non-blocking, wire-speed
switching performance
• High-capacity Stackable

Ethernet Routing Switch 5900

Chassis architecture
• 24, 48, or 96 ports of Gigabit
Ethernet for access connectivity
• Support for 2.5 Gigabit Ethernet
Next-generation, high-performance, feature-rich Ethernet
high-speed access connectivity Switch platforms specifically optimized for the Wiring Closet
• 4 ports of 10 Gigabit Ethernet for demands of the high-performance Enterprise. Extreme
network uplink connectivity
Ethernet Routing Switch 5900 products deliver the agility
• Optional support for full-power PoE/
PoE+, and Four-Pair PoE to perform equally in conventional IP and Ethernet Fabric-
• Field-replaceable AC Power and based networking solutions.
Cooling, with flexible airflow
• MACsec support The Ethernet Routing Switch 5900 products leverage the latest advances in
network switching architecture design to maximize hardware performance and
Benefits
software capability. These products represent a clear evolutionary step for the
• Innovative, versatile, highly scalable
Ethernet Routing Switch 5000 Series, particularly in terms of value and future-
adds capacity and performance
ready flexibility.
• Advanced capabilities
ease deployments
The primary purpose of a network is to interconnect users with their
• High-performance, pay-as-you
applications, and the best networks do this reliably, efficiently, and with
-grow Stacking
a high degree of agility. Extreme’s Fabric-based architecture empowers
• Convergence-ready for
advanced communications
companies to extend the virtualized Ethernet Fabric beyond the Data
Center, to the very edge of the network, delivering powerful integration of
• Autonomic Edge dramatically
reduces the cost of change users, applications, and devices.

• Hands-free service automation The Ethernet Routing Switch 5900 (ERS 5900) products are an important
part of this strategy integrating Fabric Connect capabilities into a form-
Features and Capabilities
factor that is cost-effective, flexible, and reliable. The ERS 5900 products
• Non-blocking, wire-speed
can be deployed standalone, or configured as a Stackable Chassis system
• Integrated design
of up to eight units/416 ports, supported by up to 672Gbps of virtual
• Feature-rich backplane bandwidth.
• Extreme Stackable Chassis
• Extreme Fabric Connect Supporting modern Enterprise applications requires a flexible and
highly reliable infrastructure, and the ERS 5900 products deliver against
• Fabric Attach
this challenge. These are highly strategic products, fit-for-purpose for
• Advanced IPv4 and IPv6 Routing
conventional Routed IP connectivity requirements and future-ready for
• Field-replaceable Power and Fans
the evolving and emerging software-defined needs of tomorrow. Boasting
• Front-to-Back and Back-to-Front equal competency for both IP and Fabric-based networking give businesses
airflow options
the flexibility to satisfy all common deployment scenarios, with the added
advantage of an easy transitioning between the two.

WWW.EXTREMENETWORKS.COM 1
 Extreme brings unique differentiation to the high-end Wiring Closet role: with a
flexible, non-blocking “Stackable Chassis” architecture. The proprietary Extreme
“Flexible Advanced Stacking Technology” (FAST) protocol – implemented
over dedicated Quality-of-Service aware interfaces – enables a resilient, high-
performance solution that leverages a shortest path algorithm to minimizes
ERS 5900 Stackable Chassis
transit hops in a multi-device configuration by providing active-active bi-
directional traffic flows. The Extreme Stackable Chassis technology can offer the
same performance, resiliency, and ease of serviceability attributes of a traditional
Chassis solution, but at a lower, pay-as-you-grow price point. Notable is the
ability to swap-out an individual failed unit without the requirement to pre-or
post-stage operating system software or configuration; providing equivalency to
module replacement for a modular Chassis system.
Rear View
(highlighting Stackable
The ERS 5900 products are purpose-built to support the demands of today’s
Chassis cabling) dynamic Wiring Closet with high-density, full-featured Gigabit Ethernet. It
alleviates infrastructure complexity and reduces operational burden with a truly
scalable and strategic architecture; it is designed to deliver a high-performance
Enabled Edge solution that fully optimizes investments in next-generation
ERS 5928GTS application software.

Leveraging both next-generation hardware and software technology provides

a solution that is ready to support both today’s requirements and tomorrow’s
ERS 5928GTS-PWR+
emerging needs. The ERS 5900 products enable organizations to future-proof
with a highly software-definable network virtualization solution.

ERS 5928GTS-uPWR Product Overview

Broadly speaking, the Ethernet Routing Switch 5900 products provide a mix of
Gigabit Ethernet ports for edge access and multiple 10 Gigabit Ethernet ports
ERS 5928MTS-uPWR for network uplinks. Model variants that support Power-over-Ethernet are also
available, and all models support optional highly available AC power (up to
two field-replaceable Power Supplies, or up to four for the 59100 models) and
cooling (two field-replaceable Fan modules, or four for the 59100 models).
ERS 5952GTS
Three different port configurations are available: 28-port, 52-port, and 100-port
models, and each of the configurations is available in either a PoE or non-PoE
format. Additionally, there are 28-port versions that support the new Four-Pair
ERS 5952GTS-PWR+
(Universal) PoE capability. The product range includes the following models:
• ERS 5928GTS – 24 x 10/100/1000 Mbps RJ45, plus 4 x 10 Gigabit SFP+
• ERS 5928GTS-PWR+ – 24 x 10/100/1000 Mbps RJ45 with PoE/PoE+, plus 4
x 10 Gigabit SFP+
ERS 59100GTS
• ERS 5928GTS-uPWR – 24 x 10/100/1000 Mbps RJ45 with Universal PoE,
plus 4 x 10 Gigabit SFP+
• ERS 5928MTS-uPWR 24 x 10/100/1000 Mbps/2.5 Gbps RJ45 with Universal
PoE, plus 4 x 10 Gigabit SFP+1
ERS 59100GTS-PWR+ • ERS 5952GTS – 48 x 10/100/1000 Mbps RJ45, plus 4 x 10 Gigabit SFP+
• ERS 5952GTS-PWR+ – 48 x 10/100/1000 Mbps RJ45 with PoE/PoE+,
plus 4 x 10 Gigabit SFP+
• ERS 59100GTS – 96 x 10/100/1000 Mbps RJ45, plus 4 x 10 Gigabit SFP+
• ERS 59100GTS-PWR+ – 96 x 10/100/1000 Mbps RJ45 with PoE/PoE+,
plus 4 x 10 Gigabit SFP+
The 5928MTS-uPWR model supports only
1

Full-Duplex mode on access ports.

WWW.EXTREMENETWORKS.COM 2
The product’s proven design leverages a sophisticated such as premium telepresence systems, multi-radio Wireless
chipset from the Industry’s leading supplier, featuring Access Points, VDI Thin Clients and monitors, trading
high-performance switching and frame forwarding. The turrets used in the financial vertical, downstream compact
switching core is designed to deliver wire-speed capabilities, Switches, and even PoE-power smart lighting systems.
with a fully integrated ASIC architecture that facilitates Four-Pair PoE is seen as a key enabling technology for the
hardware-assisted feature execution. Internet of Things. These models also support conventional
802.3af/802.3at PoE/PoE+.
The 28-port models – ERS 5928GTS, ERS 5928GTS-
PWR+, and ERS 5928GTS-uPWR – feature 24 1000BASE-T These PoE models utilize field-replaceable, hot-swappable
Gigabit Ethernet access ports with RJ45 interfaces; these power supplies that can each deliver up to 1,400W (or
ports also support 10/100Mbps connectivity. Four SFP+ 1,000W when connected to 110VAC), while the non-PoE
interfaces provide for network uplink connectivity, and models utilize a version that is rated at 450W. A portion of
these ports support both Gigabit and 10 Gigabit pluggable power is reserved for system operation: 200W for the 28
transceivers. The new ERS 5928MTS-uPWR model features and 52-port models, and 400W for the 96-port model.
24 1000BASE-T Gigabit/2.5 Gigabit Ethernet access
ports with RJ45 interfaces; these ports also support PoE power budgets are as follows:
100Mbps connectivity. As with all other ERS 5900 • ERS 5928GTS-PWR+ – 720W of PoE power with either
model, four SFP+ interfaces provide for network uplink 1 or 2 PSUs installed
connectivity, and these ports support both Gigabit and 10 • ERS 5928GTS-uPWR+, 5928MTS-uPWR, and 5952GTS-
Gigabit pluggable transceivers. PWR+ – 1,440W of PoE power with 2 PSUs installed,
and up to 1,200W with a single PSU
The 52-port models – ERS 5952GTS and ERS 5952GTS-
• ERS 59100GTS-uPWR+ – 2,880W of PoE power
PWR+ – feature 48 1000BASE-T Gigabit Ethernet access
with 4 PSUs installed, up to 2,880W with 3 PSUs, up
ports with RJ45 interfaces; these ports also support to 2,580W with 2 PSUs, and up to 1,200W with a
10/100Mbps connectivity. Four SFP+ interfaces provide for single PSU
network uplink connectivity, and these ports support both
Gigabit and 10 Gigabit pluggable transceivers.
Benefits
The 100-port models – ERS 59100GTS and ERS 59100GTS-
The ERS 5900 products add significant flexibility to
PWR+ – feature 96 1000BASE-T Gigabit Ethernet access
an Enterprise’s networking capability. Deployed with
ports with RJ45 interfaces; these ports also support
other Extreme or third-party Ethernet Switch devices,
10/100Mbps connectivity. Four SFP+ interfaces provide for
the ERS 5900 products provide high-capacity, high-
network uplink connectivity, and these ports support both
performance connectivity solution for high-end Wiring
Gigabit and 10 Gigabit pluggable transceivers.
Closet applications.
Importantly, all ERS 5900 models feature two dedicated
The ERS 5900 products deliver key Enterprise-class
Stackable Chassis interfaces on the rear; one a bi-
benefits, including:
directional uplink and the other a bi-directional downlink.
These QoS-aware high-speed connections enable a • Always-On – Stackable Chassis delivers a best-
resilient, high-performance hardware virtualization solution, in-class high-availability solution, featuring hot-
swappable unit replacement and integrated power and
leveraging a shortest path algorithm to minimizes transit
cooling redundancy.
hops in a multi-device configuration and supporting active-
active bi-directional traffic flows. • Convergence-Ready – flexible support for PoE/
PoE+, Universal PoE optimized for high-definition
The Power-over-Ethernet models – ERS 5928-PWR+, ERS video surveillance, true plug-and-play capabilities
5952GTS-PWR+, and ERS 59100GTS-PWR+ support full for communications, collaboration, and engagement
Standards-compliant IEEE 802.3af/802.3at PoE/PoE+ deployments, and advanced QoS capabilities.
delivering up to 30W per port to power IP Phones, Wireless • Powerful – wire-speed performance, truly scalable
Access Points, networked IP CCTV Cameras, and other virtual backplane capabilities, delivering up to 672Gbps
converged devices2. of throughput to support large-scale deployments.
• Highly Secure – Standards-based 802.1X Network
The ERS 5928GTS-uPWR and 5928MTS-uPWR models Access Control can also be integrated with Extreme
support the Four-Pair PoE initiative (a.k.a. Universal PoE), Management Center for centralized, policy-based
enabling up to 60 Watts of power on access ports. This authenticated network access. The ERS 5900 now also
capability can be used to support a greater range of high- supports MACsec for link layer encryption on both
power devices through a single standard Ethernet cable, Access and Uplink ports.

2
PoE+ Switch ports deliver up to 32.4 watts, with the “extra” 2.4W provided to compensate for potential line loss, and ensuring that a full 30W is available
to the Powered Device.

WWW.EXTREMENETWORKS.COM 3
 • Flexibility and Agility – best-in-class pay-as-you-
grow scalability, versatile PoE/PoE+/Universal PoE
High Availability Power
support, multiple 1/10 Gigabit network uplinks and and Cooling
flexible airflow. • High-availability field-replaceable, hot-swappable AC
internal Power Supplies, available in 450W and 1,400
• Fabric-Enabled – supporting Extreme’s Fabric Connect
(1,000W for 100-120V) ratings for – respectively – non-
technologies to empower a seamless transition to an
PoE and PoE applications.
agile, software-defined virtualized networking solution.
• High-availability field-replaceable Fan Trays available in
• Energy Efficient – focusing on end-to-end energy
Front-to-Back or Back-to-Front airflow configuration to
efficiency, dynamic Energy Saver further reduces power
match PSUs.
consumption for both the Ethernet Switch and IP
Phones without impacting service availability.
Warranty
• Lifetime Hardware Warranty, providing Next Business
System Compatibility Day shipment of replacement hardware.
From an operating system software perspective, the • Lifetime Software Warranty, providing access to
ERS 5900 products were introduced via the 7.0 release; Updates and Upgrades.
therefore, this is the minimum level of system software
• Lifetime Basic Technical Support
required to operate the Switches3. As of the 7.1 release,
both the ERS 5900 and ERS 4900 Series products are • 90-Day Post-Purchase Advanced Technical Support
supported by the same BOSS software image. This delivers
harmonized feature availability – where applicable – across Software Licensing
both the mainstream and premium product lines. • Base Software License: included with hardware
purchase, enables most features with the exception of
The recent BOSS 7.5 release delivers the following those specifically noted and enabled by the Advanced
enhancements: Software License.
• Integration into Extreme Management Center • Base Software + MACsec License: enables
• Support for MACsec on both Access and Uplink ports MACsec to be enabled on Access and Uplink ports, in
addition to enabling Base features. This license is used
• Adding Egress Filters for IPv4/IPv6, and Ingress Filters
to police the available of MACsec and comply with
for IPv6
jurisdictional requirements.
• Support for NTPv4
• Advanced Software License: an optional accessory,
enables the following features: OSPF, VRRP, ECMP, PIM-
Product Details SM/PIM-SSM, IPv6 Routing, (IP Static Routing, RIPng)
and IP Shortcut Routing.
Features and Capabilities
• Non-blocking, wire-speed switching architecture. • Advanced Software + MACsec License: an optional
accessory, enables the following features: OSPF, VRRP,
• Integrated design that is optimized for low latency and ECMP, PIM-SM/PIM-SSM, IPv6 Routing, (IP Static
high Quality-of-Service (including QoS-aware Stackable Routing, RIPng) and IP Shortcut Routing. Enables
Chassis interfaces).
MACsec to be enabled on Access and Uplink ports.
• Feature-rich support for conventional VLAN, Private
VLAN, Multi-Link Trunking, Spanning Tree technologies.
Country of Origin
• Extreme Stackable Chassis technology supporting
scalability up to 8 units/416 ports, and Auto-Unit China (PRC) for all models with the exception of the
Replacement for Software Image and Configuration. 5928MTS-uPWR which is sourced from Taiwan (ROC).

• Extreme Fabric Connect technology supports L2

Virtual Service Networks (VSNs), IP Shortcut Routing, Additional Information
IP Multicast-over-Fabric Connect, ETREE, and For further information about Extreme Ethernet Switches,
Fabric Attach.
and the complete Extreme Networking portfolio, please
• IP Routing includes support for Static, RIP/RIPng, visit www.extremenetworks.com.
OSPF, ECMP, VRRP, Routing Polices and Source-based
Routing, and PIM-SM/PIM-SSM.

3
The ERS 5928MTS-uPWR model requires a minimum of BOSS 7.4 to operate, and the ERS 59100 models require a minimum of BOSS 7.3.

WWW.EXTREMENETWORKS.COM 4
Selected Specifications
General • IPv6 Management Tunnels: 4
• Physical Connectivity • IPv6 Data Tunnels: 8
• 1000BASE-T Access Ports (supporting both Half and Full-Duplex)4 • IPv4/IPv6 Dual Stack
• 10GBASE-SFP+ Network Uplink Ports • Router Advertisement Guard
• Switching Fabric (Full-Duplex) • DHCPv6 Guard
• 212Gbps for 28-port models (except 5928MTS-uPWR) • MLDv1/v2 Snooping
• 284Gbps for 5928MTS-uPWR model • Duplicate Address Detection and Snooping
• 260Gbps for 52-port models • Neighbor Unreachability Detection and Filtering
• 356Gbps for 100-port models
• Frame Forwarding (Full Duplex) Multicast
• 190.5Mpps for 28-port models (except 5928MTS-uPWR) • IGMP Enabled VLANs: 256
• 298Mpps for 5928MTS-uPWR model • PIM Passive Interface: 60
• 262Mpps for 52-port models • IP Multicast Groups: 1,024
• 405Mpps for 100-port models • PIM Active Interfaces: 4
• Nominal Latency: 3.5 microseconds for 64 Byte packets • PIM-SSM Static Channels: 512
• Nominal Jitter: 0.84 microseconds for 64 Byte packets
Fabric Connect
• Frame Length: 64 to 1518 Bytes (Untagged), 64 to 1522 Bytes (Tagged)
• IEEE 802.1aq/RFC 6329 Shortest Path Bridging with custom extensions
• Jumbo Frame: up to 9,216 Bytes (802.1Q Tagged)
• MAC Addresses: 32,000
• Stackable Chassis Throughput: 84Gbps (Full-Duplex) per Switch, up
• IS-IS Adjacencies: 4
to 672Gbps
• Fabric Attach modes: Server, Proxy, and Standalone Proxy
Layer 2 • BCB/BEB Nodes per Region: 1,000
• MAC Address: up to 32,000 • BEB Nodes per VSN: up to 750 (soft ceiling)
• Port-based VLANs: 1,024 • L2 Virtual Service Networks: 1,000
• MSTP Instances: 8 • IP Shortcut Routes: 2,000
• MLT/LACP Groups: 32
• Links per MLT/LACP Group: 8 QoS and Filtering
• DHCP Snooping Entries: up to 1,024 • Priority Queues: 8
• 802.1X Clients: up to 768 • Ingress and Egress ACLs: up to 256 per Precedence, up to 16
Precedence instances
• LLDP Neighbors: up to 800
• ACL Filters: up to 4,096
• Extreme SLPP Instances: 128
Operations and Management
Layer 3 IPv4 Routing Services
• Port and VLAN-based Mirroring IPFIX Sampled Flows: up to 100,000
• ARP Entries: 4,096
Enterprise Device Manager GUI, on-box
• Static ARP Entries: 256
• Mirroring Instances: 4 sFlow Flow Sampling and off-box
• IP Interfaces: 256
• Auto-MDIX Detection4
• CLIP Interfaces: 16
• Time-Domain Reflectometry4
• IP Routes: to up 4,096
• SSHv2 with AES128
• IP Static Routes: 512
• RIP Interfaces: up to 64 Support Transceivers5
• RIP Routes: up to 4,096 • 10GBASE-T SFP+, up to 100m over
• OSPF Interfaces: up to 64 • CAT6a UTP
• OSPF Routes: up to 4,096 • 10GBASE-LRM SFP+, up to 220m
• OSPF Areas: 4 • over FDDI-grade MMF
• ECMP Groups: 256 • 10GBASE-SR/SW SFP+, up to 300m
• Paths per ECMP Group: 4 • over MMF
• VRRP Interfaces: 64 • 10GBASE-LR/LW SFP+, up to 10km over SMF
• IP Route Policies: 128 • 10GBASE-BX10 SFP+, up to 10km over SMF
• 10GBASE-ER/EW SFP+, up to 40km over SMF
Layer 3 IPv6 Routing Services
• 10GBASE-ZR/ZW SFP+, up to 80km over SMF
• IPv6 Interfaces: 256
• 10GBASE-CX Direct-Attach Cable, up to 3m over Twinax
• IPv6 Routes: up to 2,048
• 10GBASE-CX Direct-Attach Cable, up to 5m over Twinax
• IPv6 Static Neighbors: 256
• 10GBASE-CX Direct Direct-Attach Cable, up to 10m over Twinax
• CLIP Interfaces: 16

Physical Specifications
(Weights include Base Unit with single Power Supply)
Model Height Width Depth Weight

1 RU Models 44 mm 442 mm 488 mm 7.6-8.6 kg

2 RU Models 88.5 mm 442 mm 488 mm 11.9 12.9 kg

4
The ERS 5928MTS-uPWR model supports 100Mbps/1000Mbps/2.5Gbps and Full-Duplex operation on access ports; 10Mbps and/or Half-Duplex
are not supported. Additionally, the ERS 5928MTS-uPWR does not support TDR.
5
A mix of both conventional and DDI Transceivers are supported. Additionally, SFP+ sockets are also capable of supporting a wide range of 1 Gigabit
Ethernet Transceivers. Please refer to the product documentation for full details and a complete listing of all specifications and compliance.

WWW.EXTREMENETWORKS.COM 5
Power Specifications
(Base Unit fully Equipped with Power Supplies)
ERS 5928GTS ERS 5952GTS
• Up to 77.2W, up to 0.43A, and up to 263.4BTU/hr @ 200-240VAC • Up to 88.6W, up to 0.46A, and up to 302.3BTU/hr @ 200-240VAC
• Up to 77.4W, up to 0.7A, and up to 264.0BTU/hr @ 100-110VAC • Up to 90.0W, up to 0.78A, and up to 307.1BTU/hr @ 100-110VAC
• 52.2W power consumption at idle, and 56.7W under typical traffic load • 60.4W power consumption at idle, and 69.0W under typical traffic load

ERS 5928GTS-PWR+ ERS 5952GTS-PWR+

• Up to 846.0W, up to 3.77A, and up to 429.9BTU/hr @ 200-240VAC • Up to 1,662.0W, up to 7.12A, and up to 600.5BTU/hr @ 200-240VAC
• Up to 858.0W, up to 7.52A, and up to 467.4BTU/hr @ 100-110VAC • Up to 1,665.0W, up to 14.58A, and up to 754.1BTU/hr @ 100-110VAC
• 47.8W power consumption at idle, and 52.0W under typical traffic load • 56.5W power consumption at idle, and 65.6W under typical traffic load
(excluding PoE draw) (excluding PoE draw)

ERS 5928GTS-uPWR ERS 59100GTS

• Up to 1,616.0W, up to 7.1A, and up to 588.0BTU/hr @ 200-240VAC • Up to 182.6W, up to 1.0A, and up to 623.1BTU/hr @200-240VAC
• Up to 1,662.0W, up to 14.5A, and up to 744.0BTU/hr @ 100-110VAC • Up to 183.9W, up to 1.6A, and up to 627.5BTU/hr @100-110VAC
• 46.0W power consumption at idle, and 50.7W under typical traffic load • 92.0W power consumption at idle, and 111.0W under typical traffic load
(excluding PoE draw)
ERS 59100GTS-PWR+
ERS 5928MTS-uPWR • Up to 3,218.9W, up to 14.1A, and up to 1,099.0BTU/hr @200-240VAC
• Up to 1,693.3W, up to 8.0A, and up to 872.4BTU/hr @200-240VAC • Up to 3,327.2W, up to 29.0A, and up to 1,473.9BTU/hr @100-110VAC
• Up to 1,810.2W up to 15.8A, and up to 1,237.5BTU/hr @100-110VAC • 97.1W power consumption at idle, and 117.7W under typical traffic load
• 114.49W power consumption at idle, and 119.0W under typical traffic load (excluding PoE draw)Storage Humidity:
(excluding PoE draw)

Environmental Specifications
Operating Temperature 0°C to 50°C (32°F to 122°F); the 5928MTS-uPWR model supports 0°C to 45°C in Back-to-Front airflow configuration

Storage Temperature -40°C to 85°C (-40°F to 185°F)

Operating Humidity 0 to 95% maximum relative humidity, non-condensing; 0 to 85% for the 5928MTS-uPWR

Storage Humidity 10 to 90% maximum relative humidity, non-condensing; 10 to 85% for the 5928MTS-uPWR

Operating Altitude 0 to 3,048m (0 to 10,000ft) maximum Storage altitude: 0 to 12,192m (0 to 40,000ft) maximum

• Less than 52dbA at 25°C

Acoustic Noise
• Less than 60dbA at 50°C

Safety Agency Approvals

• IEC 60950 International CB Certification • EN 55022 Class A, CISPR 22 European EMC Emissions (CE)
• EN 60950-1 Europe Safety (CE): CB Scheme Certification with • EN 55024, CISPR 24 including EN 61000-4-2, 4-3, 4-4, 4-5, 4-6, 4-8 and
Member Deviations 4-11 European EMC Immunity (CE)
• UL 60950-1 USA Safety • ACMA-RCM Mark
• CSA-C22.2, #60950-1 Canada Safety • Australia EMC Emissions
• NOM Mexico Safety • Anatel Brazilian EMC Certification
• EN 60950-1 Japan Safety • Customs Union/EAC EMC Certification
• Anatel Brazilian Safety • CCC and MIIT China EMC Certification
• ACMA-RCM Australia Safety • KC mark: EMI and EMS Korean EMC Certification
• Customs Union/EAC Safety of Low-Voltage Equipment Certification • CNS 13438 Taiwan BSMI EMC
• CCC and MIIT China Safety
• CNS 14336-1 Taiwan BSMI Safety MTBF Values
• UL 1069 Hospital Signaling and Nurse Call Equipment (relevant to PWR
units only) (Base Unit with Single Power Supply)
• ERS 5928GTS – up to 248,756 hours (28.40 years)
Electromagnetic Emissions • ERS 5928GTS-PWR+ – up to 246,741 hours (28.12 years)

and Immunity • ERS

• ERS
5928GTS-uPWR – up to 254,165 (29.01 years)
5928MTS-uPWR up to 243,895 (27.84 years)
• CISPR 22 International EMC Emissions • ERS 5952GTS – up to 241,078 hours (27.52 years)
• CIRPR 24 International EMC Immunity • ERS 5952GTS-PWR+ – up to 239,731 hours (27.37 years)
• FCC part 15B, Class A USA EMC Emissions • ERS 59100GTS up to 150,386 hours (17.67 years)
• ICES-003 Class A Canadian EMC Emissions • ERS 59100GTS-PWR+ up to 145,094 hours (16.56 years)
• VCCI Japan EMC Emissions

WWW.EXTREMENETWORKS.COM 6
Ordering Information - ERS 5900 Switching Hardware
Part Number Description

ERS 5928GTS 28-port Ethernet Switch, supporting 24 x 1000BASE-T and 4 x 10GBASE-SFP+ ports. Includes single 450W AC Power
AL5900A1*-E6
Supply, Fan Trays, and Base Software License.

ERS 5952GTS 52-port Ethernet Switch, supporting 48 x 1000BASE-T and 4 x 10GBASE-SFP+ ports. Includes single 450W AC Power
AL5900A3*-E6
Supply, Fan Trays, and Base Software License.

ERS 5952GTS-PWR+ 52-port Ethernet Switch, supporting 48 x 1000BASE-T PoE/PoE+ and 4 x 10GBASE-SFP+ ports. Includes single
AL5900A4*-E6
1,400W AC Power Supply, Fan Trays, and Base Software License.

ERS 59100GTS 100-port Ethernet Switch, supporting 96 x 1000BASE-T and 4 x 10GBASE-SFP+ ports. Includes single 450W AC
AL5900A5*-E6
Power Supply, Fan Trays, and Base Software License.

ERS 59100GTS-PWR+ 100-port Ethernet Switch, supporting 96 x 1000BASE-T PoE/PoE+ and 4 x 10GBASE-SFP+ ports. Includes
AL5900A6*-E6
single 1,400W AC Power Supply, Fan Trays, and Base Software License.

ERS 5928GTS-uPWR 28-port Ethernet Switch, supporting 24 x 1000BASE-T Universal PoE ports and 4 x 10GBASE-SFP+ ports.
AL5900A7*-E6
Includes single 1,400W AC Power Supply, Fan Trays, and Base Software License.

ERS 5928MTS-uPWR 28-port Ethernet Switch, supporting 24 x 1000BASE-T/2.5GBASE-T Universal PoE ports and 4 x 10GBASE-SFP+
AL5900A9*-E6GS6
ports. Includes single 1,400W AC Power Supply, Fan Trays, and Base Software License.

Notes: Power cord is not included and must be ordered separately for switches and power supplies. For a list of available power cords, please refer to
"Lifecycle Notification on ERS Power Cord Models" at: http://bit.ly/2Gz2csk.

TAA-compliant models are also available worldwide for all ERS 5900 models. To order, add "GS" to the end of the part number when placing your order.

Due to supply chain constraints, the following ERS 5900 models come with a a North American (NA) power cord: AL5900E1B-E6GS,
AL5900E1F-E6GS, AL5900E3B-E6GS, AL5900E3F-E6GS, AL5900E4B-E6GS, AL5900E4F-E6GS, AL5900E4F-E6. Power cords for regions other than NA
must be ordered separately.

6
The 5928MTS-uPWR is offered only in TAA-compliant “GS” format.

WWW.EXTREMENETWORKS.COM 7
Ordering Information - ERS 5900 Accessories
Part Number Description

AL7000A0B-E6 450W 100-240V AC Power Supply for ERS 5900, Back-to-Front Airflow.

AL7000A0F-E6 450W 100-240V AC Power Supply for ERS 5900, Front-to-Back Airflow.

AL1905A3B-E6 1,000-1,400W 100-240V AC Power Supply for ERS 5900 PoE, Back-to-Front Airflow.

AL1905A3F-E6 1,000-1,400W 100-240V AC Power Supply for ERS 5900 PoE, Front-to-Back Airflow.

AL190506B-E6 450W DC Power Supply for ERS 5900, Back-to-Front Airflow.

AL190506F-E6 450W DC Power Supply for ERS 5900, Front-to-Back Airflow.

AA1404037-E6 ERS 5900 Series Stacking Cable, 0.5 metre.

AA1404029-E6 ERS 5900 Series Stacking Cable, 1.0 metre.

AA1404031-E6 ERS 5900 Series Stacking Cable, 3.0 metre.

AA1404032-E6 ERS 5900 Series Stacking Cable, 5.0 metre.

AA1403011-E6 10GBASE-LR/LW SFP+ up to 10km over SMF

AA1403013-E6 10GBASE-ER/EW SFP+ up to 40km over SMF

AA1403015-E6 10GBASE-SR/SW SFP+ up to 300m over MMF

AA1403016-E6 10GBASE-ZR/ZW SFP+ up to 80km over SMF

AA1403017-E6 10GBASE-LRM SFP+ up to 220m over FDDI-grade MMF

AA1403019-E6 10GBASE-CX Dual-Attach Cable, up to 3m over Twinax

AA1403020-E6 10GBASE-CX Dual-Attach Cable, up to 5m over Twinax

AA1403018-E6 10GBASE-CX Dual-Attach Cable, up to 10m over Twinax

AA1403169-E6 10G-BX 10km SFP+, TX/RX pair AA1403170

AA1403170-E6 10G-BX 10km SFP+, RX/TX pair AA1403169

ERS 5900 Advanced Software License. Enables additional functionality, including: OSPF, VRRP, ECMP, PIM-SM/PIM-SSM, IPv6 Routing,
380221
and IP Shortcut Routing.

ERS 5900 Advanced Software + MACsec License. Enables additional functionality, including: OSPF, VRRP, ECMP, PIM-SM/PIM-SSM,
383770
IPv6 Routing, and IP Shortcut Routing. Enables MACsec to be enabled on Access and Uplink ports.

383168 ERS 5900 MACsec License. Enables MACsec to be enabled on Access and Uplink ports with Base Software feature set.

Note: SFP+ sockets are also capable of supporting a wide range of 1 Gigabit Ethernet Transceivers; refer to the product documentation for complete details.

http://www.extremenetworks.com/contact Phone +1-408-579-2800

©2018 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in
the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks please
see http://www.extremenetworks.com/company/legal/trademarks. Specifications and product availability are subject to change without notice. 11961-1018-03

WWW.EXTREMENETWORKS.COM 8