FUTEK Model CSG110
General purpose 35mm DIN rail amplifier
module, DC powered, universal strain
gauge signal conditioner
NOTABLE FEATURES
• 1 kHz, 10 kHz, and 25 kHz bandwidth available
• DIP switches for easy setting adjustments
• Overvoltage protection
• Reduced noise from 100 mV to 15 mV (85%
improvement from previous version)
• Designed and manufactured in U.S.A.
SPECIFICATIONS
• Bipolar Output, Differential Input
• ±5 or ± 10 VDC DIP Switch Selectable Output, FUTEK’s newly improved CSG110 Strain Gauge Amplifier is an In-Line instru-
Unipolar Bidirectional Voltage (0-5-10 VDC) ment tooled for any full-bridge strain gauged sensor with a mV/V output. The
also available CSG110 Amplifier provides a Voltage and/or Current output via its built-in regu-
• 0–20 mA, 4–20 mA, 0–16 mA, 5–25 mA DIP lated bridge excitation source. With several models available, users are sure to find
Switch Selectable Output, Bidirectional Current an amplifier matching their specific requirements whether it calls for a bandwidth
(4-12-20 mA) also available of 1kHz, 10kHz or 25 kHz. FUTEK even manufactures an OEM version (FSH01447,
• Bridge Excitation Selectable: 5 or 10 VDC FSH01450) of this model. The CSG110 is both designed and manufactured in the USA.
• Ranges: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 4.0, 10.0
mV/V (DIP Switch Selectable)
• Interchangeable Socket Mounted 60.4K Shunt
Broadened Bandwidth
FUTEK has now broadened the bandwidth of their CSG110 by adding a 10kHz and 25kHz
Cal
version of the model to their repertoire. This allows the amplifier to cover a greater scale of
• Externally Accessible Shunt Cal Activation
applications, making the CSG110 the perfect one-stop-shop for your amplification needs.
Button
• Externally Accessible Span and Offset
potentiometers
Multiple Outputs
• Sensor Polarity Reversal DIP Switch Unlike many amplifiers, FUTEK’s CSG110 provides the user with multiple output variations
• Weight: 1.6 oz (45 g) giving the user the option to adjust the output per their application’s requirements. The
unit’s output options are: ±5 VDC, ±10 VDC, 0-20 mA, 4-20 mA, 0-16 mA, 5-25 mA, with
zero offset versions available upon request.
Sensor Solution Source
Load • Torque • Pressure • Multi Axis • Instruments • Software • Calibration ANSI ISO
[Link] Z540:1994 13485:2012
FUTEK Model CSG110 2
0.8 [21]
DIMENSIONS inches [mm]
1.7[42]
FEMALE
0.4 [11]
35MM DIN RAIL
2.5 [64]
3.1 [78]
MALE
FEMALE DB9 SENSOR SIDE MALE DB9 POWER SIDE
PIN # WIRING CODE PIN # WIRING CODE CABLE COLOR CODE
1 + EXCITATION 1 9 POWER SUPPLY RED
2 + SIGNAL 8 SIGNAL OUT (VOLTAGE) GREEN
3 – SIGNAL 7 GROUND ORANGE
4 – EXCITATION 1
6 GROUND BLACK
5 GROUND 5 GROUND N/A
6 GROUND 4 GROUND N/A
7 GROUND 3 GROUND N/A
8 GROUND 2 GROUND BLUE
9 GROUND 1 SIGNAL OUT (CURRENT) 2 WHITE
1
For 6 wire sensor connect +SENSE to +EXCITATION and –SENSE to –EXCITATION or Ground
2
Only available with current output option
A Current Switches
A B C D E
B Shunt Button
C Span Potentiometer
D Zero Potentiometer
MALE FEMALE
E Bandwidth Switch
F Excitation Switch
G Polarity Switch
H Gain Switch H G F
FUTEK Model CSG110 3
VERSIONS ENVIRONMENT
ITEM # BANDWIDTH OUTPUT PARAMETER MIN MAX UNIT
±5 VDC, ±10 VDC, 0–20 mA, Operating Temperature 32 158 °F
FSH01449 1 kHz
4–20 mA, 0–16 mA , 5–25 mA
0 70 °C
FSH035463 1 kHz ±5 VDC, ±10 VDC
Storage Temperature –40 185 °F
±5 VDC, ±10 VDC, 0–20 mA,
QSH006024 10 kHz
4–20 mA, 0–16 mA , 5–25 mA –40 85 °C
±5 VDC, ±10 VDC, 0–20 mA,
QSH014985 25 kHz Relative Humidity: 95% at 100°F (39°C)
4–20 mA, 0–16 mA , 5–25 mA
IP Rating: IP31
0–2.5-5 VDC , 0–5–10 VDC,
FSH03676 1 kHz
4–12–20 mA
OEM Version Available — Contact Factory
3
For FSH03546: Min. Power Supply is 12.5 VDC
4
Only for sensitivity of 1 mV/V or greater
5
Only for sensitivity of 1.5 mV/V or greater
ELECTRICAL SPECIFICATIONS
PARAMETER MIN TYPICAL MAX UNIT
Power Supply 6 14 26 VDC
Current Draw7 30 mA
Output Impedance (voltage) < 1 Ohms Ohms
Output Impedance (current) 700 Ohms
Sensor Impedance 100 Ohms
Bandwidth 1000 25000 Hz
Common Mode Rejection Ratio 120 dB
Noise 15 mV p-p
Output Span Range –10 10 % of Rated Output
Output Zero Range –10 10 % of Rated Output
Gain Drift with Temperature PPM of FSR per
–25 X 25
degree Celsius
Gain Non-Linearity (Better than) –0.01 X 0.01 % of FSR
Zero Drift with Temperature PPM of FSR per
–25 X 25
degree Celsius
6
Minimum power supply varies for OEM models
7
No load applied (input or output)
NOTES
• Adjusting zero will not affect calibration • Power supply must source 150 mA minimum WARNING: DO NOT CONNECT DEVICE
• Adjusting span will affect calibration • Carefully remove cover to access DIP TO POWER SUPPLY WHEN POWER
switches SUPPLY IS ALREADY ON
FUTEK Model CSG110 4
RELATED ACCESSORIES
The following accessories are readily available with our CSG110 Strain Gauge Amplifier. Please visit [Link] for full details on these items.
YELLOW MOLDED DB9 FEMALE DB9 MALE WITH HOUSING SCREW TERMINAL (FEMALE) SCREW TERMINAL (MALE)
CABLE ASSEMBLY (INCLUDED) (INCLUDED)
Item Number: FSH03219 Item Number: FSH01075 Item Number: FSH02237 Item Number: FSH02236
DB9 Female, Yellow Molded Boot, IAC150, Screw Terminal to DB9 IAC150, Screw Terminal to DB9
to 26 Awg 6 Conductor Poly Cable, Board, DB9 Female, Standard, Board, DB9 Male, Standard, Sensor
5 ft Long, CSG110 Power/Output Side Side of CSG110
Power Side of CSG110
DB9 MALE CABLE ASSEMBLY POWER SUPPLY KIT FOR CSG110 SHUNT RESISTOR
AMPLIFIER
Item Number: FSH01129 Item Number: FSH03088 Item Number: Visit Website
ZCC960, 5 ft Long, DB9 Male to Multiple Shunt Resistors are
IAC180 , Power Supply Kit for
Cable Assembly, Standard, Material available for our CSG110 series.
CSG110 , w/ Female IAC150 Screw
- PVC, 28 Awg 4 Conductors, Please visit our website for further
Terminal Adaptor & 5 ft Long ,
Braided Shielded details.
Standard , Includes 90-264 VAC
Input/15 VDC Output Power Supply
TECHNICAL SUPPORT
To access the CSG110 manual and gain setting instructions, visit our support page for detailed instructions: [Link]
Drawing Number: FI1045-Q
FUTEK reserves the right to modify its design and specifications without notice.
Please visit [Link] for complete terms and conditions.
10 Thomas, Irvine, CA 92618 USA
Tel: (949) 465-0900
Fax: (949) 465-0905 ANSI ISO
[Link] Z540:1994 13485:2012
