Project:

Roadway Location:

Cat.No:

Type:

Lamps: Qty:
RoadFocus Notes:

The Philips Lumec RoadFocus LED Cobra Head luminaires feature a sleek design that
72, 108 and 160W RFM provides seamless replacement of existing HID luminaires. RoadFocus is available
in three sizes, offers multiple lumen packages, and a complete array of optical
distributions, making it an outstanding solution for all types of roadway applications.

Ordering guide Example: RFM-72W32LED4K-T-R2S-UNIV-DMG-AST-FAWS-RCD-SP2-WC10-GY3

Luminaire LED Module Optical Voltage Driver and Dimming Wattage Twist-Lock Surge Warranty Finish
System Switch Receptacle Protection

RFM WC10

RFM 72W32LED4K-T R2S Type II UNIV Standard: FAWS5 Standard: SP28 WC101 BK Black
RoadFocus Short 120-277VAC DMG1,6  Field RCD1,3,7 20kV / 20kA 10-year Finish
or
Medium Dimmable driver 0-10V Adjustable Receptacle Surge Protector limited
R2M Type II HVU BR Bronze
108W32LED4K-T2,4 Wattage for twist-lock (optional) warranty
Medium 347-480VAC Optional: Finish
Selector photocell or (standard)
or AMPD2,4,5,6
R3S Type III (optional) shorting cap, GY3 Gray
Amplight Dimming
108W48LED4K-T Short 5-pin Finish
DynaDimmer
or R3M Type III (standard) WH White
Economy Profile
Medium CDMGE252,4,5,6 Optional: Finish
160W48LED4K-T2,4
5 Type V RCD73,7
CDMGE502,4,5,6
Receptacle for
CDMGE75 2,4,5,6
twist-lock
DynaDimmer photocell or
Median Profile shorting cap,
CDMGM252,4,5,6 7-pin
CDMGM502,4,5,6 (optional)
CDMGM752,4,5,6

DynaDimmer
Safety Profile
CDMGS252,4,5,6
CDMGS502,4,5,6
CDMGS752,4,5,6

DALI2,4,5,6
Digitally Adressable
Lighting Interface

DMG-AST*2,4
Adjustable Startup Time

DMG-CLO*2,4,5
Constant Light Output

DMG-OTL*2,4
Over The Life
*Includes 0-10v
Dimming

1. Please note these integrated features come standard with 3. Use of photoelectric cell or shorting cap is required 7. When RDC7 option is selected you will get 7-pin
RoadFocus luminaires. to ensure proper illumination. instead of standard RCD 5-pin.
2. Denotes programmable driver option. Not available with 4. Not available with HVU (347-480volt). 8. When SP2 option is selected you will get SP2 instead
HVU (347-480volt). Not available with 1050 mA versions 5. FAWS not available with AMPD, CDMG options, DALI or CLO. of standard SP1.
(108W32LED, 160W48LED). 6. Dimming choices: Select either DMG or AMPD or one
of the CDMG options or DALI.

RFM_Spec  12/14  page 1 of 4

RFM  RoadFocus LED Cobrahead, Medium
72, 108, and 160W

Accessories (must be ordered as separate line items - quickly and easily installed in the field)
ACC-RFS-RFM-RFL-PH99 ACC-RFS-RFM-RFL-UNIV-SPC9,10
Shorting cap Starsense twist-lock photoelectric cell & antenna
node, UNIV (120-277VAC).
ACC-RFS-RFM-RFL-HS
House side shield, 1 per 16 LED light engine. ACC-RFM-RFL-HVU-SPC9,10
Starsense twist-lock photoelectric cell & antenna
ACC-RFS-RFM-RFL-UNIV-PH89
node, HVU (347-480VAC).
Twist-lock Photoelectric Cell, UNIV (120-277VAC).
ACC-RFS-RFM-RFL-UNIV-SPCD9,10
ACC-RFM-RFL-PH8/3479
Starsense dimmable twist-lock photoelectric cell
Twist-lock Photoelectric Cell, HVU 347VAC.
& antenna node, UNIV (120-277VAC).
ACC-RFM-RFL-PH8/4809
Twist-lock Photoelectric Cell, HVU 480VAC.
ACC-RFS-RFM-RFL-UNIV-PH8XL9
Twist-lock Photoelectric Cell, extended life,
UNIV (120-277VAC).

9. Use of photoelectric cell or shorting cap is required to ensure proper illumination.

10. Please note that more hardware as well as software are required - please contact the quotations department for help with putting together the entire control system.

LED Wattage and Lumen Values

LED = Philips Lumileds LUXEON T, CRI = 70, CCT = 4000K (+/- 350K)
System (LED + driver) rated life = 100,000 hrs11

LED Module Typical Typical LED Typical System Current (A) @ Efficacy BUG Rating
Delivered System Current 120V 208V 240V 277V 347V 480V
(Lm/W)
Lumens Wattage (W)12 (mA)
72W32LED4K-T-R2S 8,330 73 700 0.62 0.36 0.31 0.28 0.21 0.15 114 B2-U0-G1
72W32LED4K-T-R2M 8,140 73 700 0.62 0.36 0.31 0.28 0.21 0.15 112 B2-U0-G2
72W32LED4K-T-R3S 8,085 73 700 0.62 0.36 0.31 0.28 0.21 0.15 111 B1-U0-G2
72W32LED4K-T-R3M 8,178 73 700 0.62 0.36 0.31 0.28 0.21 0.15 112 B2-U0-G2
108W32LED4K-T-R2S 11,169 108 1050 0.91 0.53 0.47 0.41 103 B2-U0-G2
108W32LED4K-T-R2M 10,914 108 1050 0.91 0.53 0.47 0.41 101 B2-U0-G2
N/A
108W32LED4K-T-R3S 10,841 108 1050 0.91 0.53 0.47 0.41 100 B1-U0-G1
108W32LED4K-T-R3M 10,965 108 1050 0.91 0.53 0.47 0.41 102 B2-U0-G2
108W48LED4K-T-R2S 12,507 106 700 0.93 0.53 0.46 0.40 0.32 0.23 118 B3-U0-G2
108W48LED4K-T-R2M 12,222 106 700 0.93 0.53 0.46 0.40 0.32 0.23 115 B2-U0-G2
108W48LED4K-T-R3S 12,140 106 700 0.93 0.53 0.46 0.40 0.32 0.23 115 B2-U0-G2
108W48LED4K-T-R3M 12,279 106 700 0.93 0.53 0.46 0.40 0.32 0.23 116 B2-U0-G2
160W48LED4K-T-R2S 16,778 161 1050 1.34 0.76 0.66 0.58 104 B3-U0-G2
160W48LED4K-T-R2M 16,396 161 1050 1.34 0.76 0.66 0.58 102 B3-U0-G3
N/A
160W48LED4K-T-R3S 16,285 161 1050 1.34 0.76 0.66 0.58 101 B2-U0-G3
160W48LED4K-T-R3M 16,472 161 1050 1.34 0.76 0.66 0.58 102 B3-U0-G3
Type V (5) IES files for all LED modules pending.

11. L70 >100,000 hrs (at ambient temperature = 25°C).

12. System wattage or total luminaire wattage includes the LED module and the LED driver.
Note: Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at the discretion of Philips.

RFM_Spec  12/14  page 2 of 4

RFM  RoadFocus LED Cobrahead, Medium
72, 108, and 160W

Field Adjustable Wattage (FAWS) Multiplier Chart

72W32LED4K-T or 108W48LED4K-T (700 mA) 108W32LED4K-T OR 160W48LED4K-T (1050mA)

Typical System
FAWS Typical Delivered Typical System wattage FAWS Typical Delivered
wattage and typical
Position Lumens Multiplier and typical current Position Lumens Multiplier
current
1 0.37 0.29 1 0.33 0.27
2 0.55 0.50 2 0.56 0.48
3 0.62 0.58 3 0.64 0.57
4 0.71 0.69 4 0.71 0.65
5 0.77 0.75 5 0.79 0.74
6 0.81 0.81 6 0.84 0.79
23.25”
7 0.84 0.87 7 0.89 591 mm 0.85
8 0.94 0.91 8 0.92 0.90
9 0.98 0.96 9 0.96 0.95
10 1.00 1.00 10 1.00 1.00
4.38”
111 mm

Dimensions
Side View Bottom View
23.25”
591 mm

4.38”
11”
279 mm
RFM
111 mm

Weight: 12.2 Lbs

EPA: 0.53 sq. ft.

Predicted Lumen Depreciation Data14,15,16

11”
279 mm
RFM
Ambient Temperature °C Driver mA Calculated L70 Hours L70 per TM-21 Lumen Maintenance % at 60,000 hrs
25°C up to 1050 mA >100,000 hours >60,000 hours >96%

14. Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology.
Actual experience may vary due to field application conditions.
15. L70 is the predicted time when LED performance depreciates to 70% of initial lumen output.
16.Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours

Specifications
Housing Light Engine Optical System: Composed of high performance
Made of a low copper die cast Aluminum alloy (A360), Composed of 4 main components: LED Module / optical grade polymer refractor lenses to achieve
0.100" (2.5mm) minimum thickness. Fits on a 1.66" Optical System / Heat Sink / Driver desired distribution optimized to get maximum
(42mm) O.D. (1.25" NPS), 1.9" (48mm) O.D. (1.5" NPS) spacing, target lumens and a superior lighting
Electrical components are RoHS compliant, IP66 uniformity. System is rated IP66. Performance shall be
or 2 3/8" (60mm) O.D. (2" NPS) by 5 1/2" (140mm) sealed light engine equipped with Philips Lumileds tested per LM-63, LM-79 and TM-15 (IESNA) certifying
minimum long tenon. Comes with a zinc plated LUXEON T LEDs.LEDs tested by ISO 17025-2005 its photometric performance. Dark Sky compliant with
clamp fixed by 2 zinc plated hexagonal bolts 3/8 16 accredited lab in accordance with IESNA LM-80 0% uplight and U0 per IESNA TM-15.
UNC for ease of installation. Provides an easy step guidelines in compliance with EPA ENERGY STAR,
adjustment of +/- 5° tilt in 2.5º increments. Includes Heat Sink: Built in the housing, designed to ensure
extrapolations in accordance with IESNA TM-21. Metal
integral bubble level standard (always included). A high efficacy and superior cooling by natural vertical
core board ensures greater heat transfer and longer
quick release, tool less entry, single latch, hinged, convection air flow pattern always close to LEDs and
lifespan.
removable door opens downward to provide access driver optimising their efficiency and life. Product
to electronic components and to a terminal block. LED Module (Included), LED type Philips Lumileds does not use any cooling device with moving parts
Door is secured to prevent accidental dropping or LUXEON T. Composed of high performance white (only passive cooling). Wide openings enable natural
disengagement. A clearance of 13" (330mm) at the LEDs. Color temperature as per ANSI bin 4000 Kelvin cleaning and removal of dirt and debris. Entire lumi-
rear is required in order to remove the door. Complete nominal (3985K +/ 275K), CRI 70 Min. 75 Typical. naire is rated for operation in ambient temperature of
with a bird guard protecting against birds and similar -40°C / -40°F up to +40°C / +104°F.
intruders and an ANSI label to identify wattage and
source (both included in box). Housing (including
electrical compartment) rated IP54 per ANSI C136.37.

RFM_Spec  12/14  page 3 of 4

RFM  RoadFocus LED Cobrahead, Medium
72, 108, and 160W

Specifications (continued)

Driver: High power factor of 90% min. Electronic Safety Mode:

driver, operating range 50/60 Hz. Auto adjusting CDMGS25: 4 hours, 25% power dimming
universal voltage input from 120 to 277 or 347 to 480 CDMGS50: 4 hours 50% power dimming
VAC rated for both application line to line or line to CDMGS75: 4 hours 75% power dimming
neutral, Class I, THD of 20% max. Wiring
Median Mode: The connection of the luminaire is done using a
(DMG), Dimming compatible 0-10 volts.
CDMGM25: 6 hours 25% power dimming terminal block connector 600V, 85A for use with #2
The current supplying the LEDs will be reduced by the
CDMGM50: 6 hours 50% power dimming 14 AWG. wires from the primary circuit, located inside
driver if the driver experiences internal overheating
CDMGM75: 6 hours 75% power dimming the housing. Due to the inrush current that occurs with
as a protection to the LEDs and the electrical
components. Output is protected from short circuits, Economy Mode: electronic drivers, recommend using a time delay or
voltage overload and current overload. Automatic slow blow fuse to avoid unnecessary and unwanted
CDMGE25: 8 hours 25% power dimming
recovery after correction. Standard built in driver fuse blowing that can occur with fast acting fuses.
CDMGE50: 8 hours 50% power dimming
surge protection of 2.5kV (min). CDMGE75: 8 hours 75% power dimming Hardware
Integrated Features *Not available with HVU (347-480V) All exposed screws shall be stainless steel with
DMG: Dimmable driver 0-10V. Ceramic primer seal basecoat to reduce seizing of the
FAWS: Field Adjustable Wattage Selector, pre‑set
parts. All seals and sealing devices are made and/or
RCD*: Receptacle with 5 pins enabling dimming, can to the highest position, can be easily switched in
lined with EPDM and/or silicone and/or rubber.
be used with a twist lock Starsense or photoelectric the field to the required position. This reduces total
cell or a shorting cap. luminaire wattage consumption and reduces the light Finish
level – see the FAWS multiplier chart for more details. Color in accordance with the AAMA 2603 standard.
WC10: 10-year limited warranty from defects in NOTE: When using FAWS with dimming, set the switch
material and workmanship in its intended use, as well Application of polyester powder coat paint (4
to position 10 (maximum output) to enable dimming. mils/100 microns) with ± 1 mils/24 microns of
as coverage for finish. Visit website for more details.
SP2: 20kV / 20kA surge protection device that tolerance. The Thermosetting resins provides a
SP1: Surge protection device tested in accordance discoloration resistant finish in accordance with the
provides extra protection beyond the SP1
with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 ASTM D2244 standard, as well as luster retention in
10kV/10kA level.
Scenario I Category C High Exposure 10kV/10kA keeping with the ASTM D523 standard and humidity
waveforms for Line-Ground, Line-Neutral and RCD7*: Receptacle with 7 pins enabling dimming and proof in accordance with the ASTM D2247 standard.
Neutral-Ground, and in accordance with DOE MSSLC additional functionality (to be determined), can be
The surface treatment achieves a minimum of 2000
Model Specification for LED Roadway Luminaires used with a twist lock Starsense node or photoelectric
hours for salt spray resistant finish in accordance with
Appendix D Electrical Immunity High test level cell or a shorting cap.
testing performed and per ASTM B117 standard.
10kV/10kA. Please note: Additional hardware will be required to
Please note that these integrated features always utilize the additional 2 pins on this receptacle. LED products manufacturing standard
come with RoadFocus luminaire. The electronic components sensitive to electrostatic
* Use of photoelectric cell or shorting cap is required
discharge (ESD) such as light emitting diodes (LEDs)
* Use of photoelectric cell or shorting cap is required to ensure proper illumination.
are assembled in compliance with IEC61340-5-1 and
to ensure proper illumination.
Luminaire Useful Life ANSI/ESD S20.20 standards so as to eliminate ESD
Driver and Luminaire Options Refer to IES files for energy consumption and events that could decrease the useful life of
AMPD*: Driver pre-programmed for compatibility with delivered lumens for each option. Based on ISTMT the product.
Amplight control system. in situ thermal testing in accordance with UL1598
Vibration Resistance
and UL8750, Philips System Reliability Tool, Philips
AST*: Pre-set driver for progressive start-up of the The RFM meets the ANSI C136.31, American
Advance data and Philips Lumileds LM-80/TM-21
LED module(s) to optimize energy management and National Standard for Roadway Luminaire Vibration
data, expected to reach 100,000 + hours (72W32LED
enhance visual comfort at start-up. specifications for Bridge/overpass applications.
and 108W48LED at 700mA) or 94,500 hours
(Tested for 3G over 100,000 cycles by an independent
CLO*: Pre-set driver to manage the lumen (108W32LED and 160W48LED at 1050mA) with >L70
lab)
depreciation by adjusting the power given to the LEDs lumen maintenance @ 25°C. Luminaire Useful Life
offering the same lighting intensity during the entire accounts for LED lumen maintenance AND all of these Certifications and Compliance
lifespan of the LED module. additional factors including: LED life, driver life, PCB cULus Listed for Canada and USA. Luminaire meets
DALI*: Pre-set driver compatible with the DALI control substrate, solder joints, on/off cycles, burning hours DOE and MSSLC Model Specification for LED
system. and corrosion. Roadway Luminaires. RoadFocus LED Cobrahead
luminaires are DesignLights Consortium qualified.
OTL*: Pre-set driver to signal end of life of the LED
module(s) for better fixture management. Limited Warranty
CDMG*: Dynadimmer standard dimming 10-year limited warranty. See philips.com/luminaires
functionalities including pre-programmed scenarios for details and restrictions.
to suit many applications and needs from safety to Brackets/Arms
maximum energy savings

© 2014 Koninklijke Philips N.V.  All rights reserved. Philips Lighting, North America Corporation
Philips reserves the right to make changes in specifications 200 Franklin Square Drive, Somerset, NJ  08873
and/or to discontinue any product at any time without notice Tel. 855-486-2216
or obligation and will not be liable for any consequences
resulting from the use of this publication. Imported by: Philips Lighting,
philips.com/luminaires A division of Philips Electronics Ltd.
281 Hillmount Rd, Markham, ON, Canada L6C 2S3
RFM_Spec  12/14  page 4 of 4 Tel. 800-668-9008