Scribd
Upload
170 views4 pages

CS2 H2S SO2 Analyzer Specs & Data

This document provides specifications for a heated sample line including input data, process tube specifications, and calculations of sample condensate accumulation. It lists the maintenance temperature, maximum product and ambient exposure temperatures, and safety value. It describes 4 process tubes with details on diameter, material, wall thickness, and type (heated, unheated, none). The document also shows the formula and calculations used to determine the total condensate accumulation of 5.11428316844039 ml/h based on the cooled air flow, sample dew point, moisture content, and accumulation per unit of cooled air.

Uploaded by

Kevin Pratyatama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
170 views4 pages

CS2 H2S SO2 Analyzer Specs & Data

This document provides specifications for a heated sample line including input data, process tube specifications, and calculations of sample condensate accumulation. It lists the maintenance temperature, maximum product and ambient exposure temperatures, and safety value. It describes 4 process tubes with details on diameter, material, wall thickness, and type (heated, unheated, none). The document also shows the formula and calculations used to determine the total condensate accumulation of 5.11428316844039 ml/h based on the cooled air flow, sample dew point, moisture content, and accumulation per unit of cooled air.

Uploaded by

Kevin Pratyatama
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

Weebz Mandiri

Heated Sample Line Indo Warehouse Blok C1


Jl. Kaliabang Tengah No. 22
Calculator Bekasi Utara 17125 – Indonesia
telp/fax. +62.21.8838.0008
CS2 H2S SO2 Analyzer - SPV - Lenzing

Input Data
Maintenance Temperature 55 degC Min. Ambient Temp 25 degC
Max. Product Temp. 65 degC Max. Ambient Temp 35 degC
Max. Exposure Temp. 40 degC Safety Value 20%

Process Tube Spec


Process Tube 1 Process Tube 3
Outer Diameter 1/4 inch Min. Ambient Temp - inch
Tube Material PFA Max. Ambient Temp -
Wall Thickness TBA inch Safety Value - inch
Type Heated Type None

Process Tube 2 Process Tube 4


Outer Diameter 1/4 inch Min. Ambient Temp - inch
Tube Material PFA Max. Ambient Temp -
Wall Thickness TBA inch Safety Value - inch
Type Unheated Type None

Calculation of Sample Condensate Accumulation Formula used:


Cooled Air flow: 240 Nl/h 𝑤_𝑡𝑡𝑙=𝐶𝑜𝑜𝑙𝑒𝑑 𝑎𝑖𝑟 𝑓𝑙𝑜𝑤 ×(𝑀𝑜𝑖𝑠𝑡𝑢𝑟𝑒 𝐴𝑐𝑐𝑢𝑚.)/((100 𝑁𝑙 𝑐𝑜𝑜𝑙𝑒𝑑 𝑎𝑖𝑟)/ℎ𝑟)
Sample Dew Point: 30 °C
Moisture Content: 4.25120084358225 %Vol
Moisture Accumulation: 2.13095132018349 ml/h per 100 Nl cooled air/h 𝑤_𝑡𝑡𝑙=𝑇𝑜𝑡𝑎𝑙 𝑐𝑜𝑛𝑑𝑒𝑛𝑠𝑎𝑡𝑒 𝑎𝑐𝑐𝑢𝑚𝑢𝑙𝑎𝑡𝑖𝑜𝑛
Condensate Accumulation: 5.11428316844039 ml/h
Convertion
Vol/Length Unit Constant to m3/m Length Unit Convertion Constant to m
m3/m 1 m 1
cc/ft 3.28E-06 ft 0.304785126485827
inch 0.0254
mm 1.00E-03
Flow Rate
Pressure Unit Convertion Constant to psia Time Unit Convertion Constant to Unit
psia 1 s 1 m3/s
bar 0.0689464975179261 minute 60 m3/h
atm 14.6959 cc/min
l/h
l/min
Convertio
Convertion Convertion n
Constant first Constant first Constant
unit Volume Unit unit Temperaturfirst unit
1 m3 1 degC 1
0.000277777778 cc 1.00E-06 degF x
1.66666667E-08 l 0.001
2.78E-07 ft3 0.0283168
1.67E-05

You might also like