Compact Enclosures AE Stainless Steel (304)

Material: Supply includes:

– Enclosure: Stainless steel – Enclosure with door(s)
– Door: Stainless steel, all-round foamed-in PU seal – Mounting plate
– Mounting plate: Sheet steel – Lock: 3mm double-bit
– Stainles steel 1.4301 (AISI 304) – 3-point lock system is included for enclosures ≥1200 high
– Lock insert: Die-cast zinc, nickel-plated Protection category IP to IEC 60 529:
Surface finish: – IP 66 (*IP 55)
– Enclosure and door: Brushed, grain 400, peak-to-valley height Protection category NEMA:
< 0.8µm – NEMA 4X (*NEMA 12)
– Mounting plate: Zinc-plated
IK Code:
– IK08

Stainless Steel 304

Rain Canopy
Model No. Width mm Height mm Depth mm Inner Door Door(s)
Stainless Steel
1001600 200 300 120 XAU10350199 - 1
1002600 200 300 155 XAUI10350199 2470000 1
1003600 300 300 210 XAU10330199 2361000 1
1005600 300 380 210 ON REQUEST 2361000 1
1004600 380 300 155 XAU10310199 2471000 1
1011600 380 300 210 XAU10310199 2472000 1
1006600 380 380 210 XAU13800199 2472000 1
1008600 380 600 210 XAU10380199 2472000 1
1015600 400 500 210 XAU10450199 - 1
1007600 500 500 210 XAU10500199 2362000 1
1013600 500 500 300 XAU10500199 - 1
1009600 600 380 210 XAU10390199 2473000 1
1010600 600 600 210 XAU10600199 2473000 1
1012600 600 760 210 XAU10760199 2473000 1
1014600 760 760 300 XAU10770199 2474000 1
1016600 800 1000 300 XAU11800199 2475000 1
1017600 800 1200 300 XAU12800199 2475000 1
*1018600 1000 1000 300 ON REQUEST 2363000 2
*1019600 1000 1200 300 ON REQUEST 2363000 2

18 1800 350 665 | [Link]

 Compact Enclosures AE Stainless Steel (316L)

Material: – Lock: 3mm double-bit

– Enclosure: Stainless steel – 3-point lock system is included for enclosures ≥1200 high
– Door: Stainless steel, all-round foamed-in PU seal – Nut-sert M8 to suit wall brackets
– Mounting plate: Sheet steel Protection category IP to IEC 60 529:
– Stainless steel 1.4404 (AISI 316L) – IP 66 (*IP 55)
– Lock insert: Stainless steel 1.4404 (AISI 316L)
Protection category NEMA:
Surface finish: – NEMA 4X (*NEMA 12)
– Enclosure and door: Brushed, grain 400, peak-to-valley height
< 0.8 µm IK Code:
– Mounting plate: Zinc-plated – IK08

Supply includes:
– Enclosure with door(s)
– Mounting plate

Stainless Steel 316L

Model No. Width mm Height mm Depth mm Inner Door Door(s)
XAU1001500 200 300 120 XAU10350199 1
XAU1002500 200 300 155 XAU10350199 1
XAU1003500 300 300 210 XAU10330199 1
XAU1005500 300 380 210 ON REQUEST 1
XAU1004500 380 300 155 XAU10310199 1
XAU1011500 380 300 210 XAU10310199 1
XAU1006500 380 380 210 XAU13800199 1
XAU1008500 380 600 210 XAU10380199 1
XAU1015500 400 500 210 XAU10450199 1
XAU1463999 400 600 320 ON REQUEST 1
XAU1007500 500 500 210 XAU10500199 1
XAU1013500 500 500 300 XAU10500199 1
XAU1009500 600 380 210 XAU10390199 1
XAU1010500 600 600 210 XAU10600199 1
XAU1663999 600 600 300 XAU10600199 1
XAU1664999 600 600 400 XAU10600199 1
XAU1012500 600 760 210 XAU10760199 1
XAU1068500 600 800 300 XAU10580199 1
XAU1684999 600 800 400 XAU10580199 1
XAU1063999 600 1000 300 XAU10900199 1
XAU1014500 760 760 300 XAU10770199 1
XAU1884999 800 800 400 ON REQUEST 1
XAU1016500 800 1000 300 XAU11800199 1
XAU1804999 800 1000 400 XAU11800199 1
XAU1017500 800 1200 300 XAU12800199 1
XAU1824999 800 1200 400 XAU12800199 1
*XAU1018500 1000 1000 300 ON REQUEST 2
*XAU1019500 1000 1200 300 ON REQUEST 2
*XAU1024999 1000 1200 400 ON REQUEST 2
*XAU1224999 1200 1200 400 ON REQUEST 2

[Link] | 0800 748 825 19

Sloped Roof Enclosures AE Stainless Steel (316L)

Material: – Mounting plate

– Enclosure: Stainless steel – Lock: 3mm double-bit
– Door: Stainless steel, all-round foamed-in PU seal – Built in 30 degree sloped roof
– Mounting plate: Sheet steel, powder coated white – Additional dust / water proofing provided by rubber seal across
– Stainless steel 1.4404 (AISI 316) top of door
– Lock insert: Cam lock made entirely from stainless steel 1.4404 – Door set back underneath canopy
(AISI 316) – Nut-sert M8 to suit wall brackets
– Gland plate included
Surface finish:
– Enclosure and door: Brushed, grain 400, peak-to-valley height Protection category IP to IEC 60 529:
<0.8 µm – IP 66
– Mounting plate: Zinc-plated Protection category NEMA:
Supply includes: – NEMA 4X
– Enclosure with door(s) * Usable height

Stainless Steel 316L

Model No. Width mm Height mm* Depth mm

XAU1002590 200 *300 155
XAU1006590 380 *380 210
XAU1008590 380 *600 210
XAU1012590 600 *760 210
XAU1068590 600 *800 300

Not available in New Zealand

Rittal offers fast and reliable modifications working in con- Cut outs
junction with customers and end users to develop and
deliver a complete solution.
Rittal Modification Centre

Typical modifications include cut outs for:

■■ Cable gland entries

■■ Climate control options
■■ HMI and HIM panels
■■ Viewing windows
■■ Switches and push buttons

Contact your account manager for more information

20 1800 350 665 | [Link]

 Compact System Enclosures CM

Material: Option:
– Enclosure: Sheet steel 1.5mm – Gland plate sold seperately
– Door: Sheet steel, 2.0 mm, all-round foamed-in PU seal Colour:
– Mounting plate: Sheet steel 3.0mm – RAL 7035
Surface finish: Protection category IP to IEC 60 529:
– Enclosure and door: Dipcoat primed, powder-coated on the – IP 55
outside, textured paint
– Mounting plate: Zinc-plated Protection category NEMA:
– NEMA 12
Supply includes:
– Enclosure with hinged door(s) IK Code:
– 3-point locking system with double-bit insert – IK08
– Mounting plate
– Open base for individual cable entry

Mild Steel

W H D Base/Plinth 100mm Base/Plinth 200mm Internal Assembly Rails Punched Sections*

Model No. Door(s)
mm mm mm Front/Rear Side Front/Rear Side Vertical Horizontal Depth Width
5110500 600 800 400 8620002 8620031 8620022 8620041 5001051 5001050 8612140 8612060 1
5111500 600 1000 400 8620002 8620031 8620022 8620041 5001052 5001050 8612140 8612060 1
5112500 600 1200 300 8620002 8620030 8620022 8620040 5001053 5001050 8612130 8612060 1
5113500 600 1200 400 8620002 8620031 8620022 8620041 5001053 5001050 8612140 8612060 1
5114500 800 1000 300 8620003 8620030 8620023 8620040 5001052 5001051 8612130 8612080 1
5115500 800 1000 400 8620003 8620031 8620023 8620041 5001052 5001051 8612140 8612080 1
5116500 800 1200 300 8620003 8620030 8620023 8620040 5001053 5001051 8612130 8612080 1
5117500 800 1200 400 8620003 8620031 8620023 8620041 5001053 5001051 8612140 8612080 1
5118500 1000 1000 300 8620005 8620030 8620024 8620040 5001052 5001052 8612130 8612000 2
5119500 1000 1200 300 8620005 8620030 8620024 8620040 5001053 5001052 8612130 8612000 2
5120500 1000 1200 400 8620005 8620031 8620024 8620041 5001053 5001052 8612140 8612000 2
5121500 1000 1400 300 8620005 8620030 8620024 8620040 5001054 5001052 8612130 8612000 2
5122500 1000 1400 400 8620005 8620031 8620024 8620041 5001054 5001052 8612140 8612000 2
5123500 1200 1200 400 8620007 8620031 8620025 8620041 5001053 5001053 8612140 8612020 2

[Link] | 0800 748 825 21

Fibreglass Enclosures KS

Material: – Twin seal on the top and bottom edges of the door as integral rain
– Enclosure and door: Fibreglass-reinforced unsaturated polyester protection strip
– Door: All-round foamed-in PU seal – Press-fitted C sections at the sides for infinitely variable mounting
– Mounting plate: Sheet steel plate depth adjustment
– Viewing window: Glazed acrylic, 3.0 mm with all-round rubber – Viewing window in the door on selected models
cable clamp strip
Colour:
Surface finish: – Similar to RAL 7035
– Enclosure and door: Dyed plastic with no after-treatment
– Mounting plate: Zinc-plated Protection category IP to IEC 60 529:
– IP 56 (window) – IP 66 (standard) – *IP56 (standard)
Supply includes:
– Enclosure with hinged door, of all-round solid construction, 3mm Protection category NEMA:
double-bit lock – NEMA 12 (window) – NEMA 4X (standard)
– Mounting plate IK Code:
– IK08

Model No. Model No. Mounting Plate

Width mm Height mm Depth mm Door(s)
Standard With Window Adjustment
1423500 - 200 300 150 1481000 1
1432500 - 250 350 150 1481000 1
1434500 - 300 400 200 1481000 1
1444500 1448500 400 400 200 1481000 1
1446500 1449500 400 600 200 1481000 1
1453500 1454500 500 500 300 1491000 1
1466500 1467500 600 600 200 1481000 1
1468500 1469500 600 800 300 1491000 1
1480500 1479500 800 1000 300 1491000 1
*1400500 - 1000 1000 300 1491000 2

Top Accessories

Model No. Description Packs Of

2584000 Pole Clamp 2
1483010 Wall Mounting Bracket 4

22 1800 350 665 | [Link]

 Enclosure Systems

[Link] | 0800 748 825 23

System Enclosures SE 8

Material: – 2 TS punched rails 18 x 38 mm

– Enclosure: Sheet steel, 1.5 mm, – Rear panel, one piece
– Door: Sheet steel, 2.0 mm – Rear panel, two pieces*
– Rear panel: Sheet steel, 1.5 mm Colour:
– Gland plates: Sheet steel, 1.5 mm – RAL 7035
– Mounting plate: Sheet steel, 3.0 mm
Protection category IP to IEC 60 529:
Surface finish: – IP 55
– Enclosure, door and rear panel: dipcoat-primed, powder-coated
on the outside, textured paint Protection category NEMA:
– Mounting plate and gland plates: Zinc-plated – NEMA 12

Supply includes: IK Code:

– Enclosure, solid top and sides – IK10
– Door(s), right hand door hinge with single-door enclosures, may
be swapped to opposite side
– Mounting plate & gland plate
– Rear panel, detachable
– Lock: 3 mm double-bit

Mild Steel

Base/Plinth 100mm Base/Plinth 200mm

Model No. Width mm Height mm Depth mm Door(s)
Front/Rear Side Front/Rear Side
5830500 600 1800 400 8620002 8620031 8620022 8620041 1
5831500 800 1800 400 8620003 8620031 8620023 8620041 1
5832500 800 2000 400 8620003 8620031 8620023 8620041 1
5833500 800 2000 500 8620003 8620032 8620023 8620042 1
5834500 800 2000 600 8620003 8620033 8620023 8620043 1
5840500 1000 1800 400 8620005 8620031 8620025 8620041 2
5841500 1200 1800 400 8620007 8620031 8620027 8620041 2
*5842500 1600 1800 400 8620008 8620031 8620026 8620041 2
5843500 1200 2000 400 8620007 8620031 8620027 8620041 2
5844500 1200 2000 500 8620007 8620032 8620027 8620042 2
5845500 1200 2000 600 8620007 8620033 8620027 8620043 2
*5846500 1800 2000 500 8620009 8620032 8620029 8620042 2

XAU86860199M Inner door to suit 600 x 1800 TS 8 & SE 8 System Enclosure Inner Doors
XAU86060199M Inner door to suit 600 x 2000 TS 8 & SE 8
Other sizes upon request
XAU88860199M Inner door to suit 800 x 1800 TS 8 & SE 8
New

XAU88060199M Inner door to suit 800 x 2000 TS 8 & SE 8 Also require 2 x 2420000 cam locks per inner door

24 1800 350 665 | [Link]

 System Enclosures SE 8 Stainless Steel (304)

Material: – Rear panel, detachable

– Enclosure: Stainless steel, 1.4301 (AISI 304), 1.5 mm, exterior – Mounting plate
brushed – Gland plates
– Door: Stainless steel, 1.4301 (AISI 304), 2 mm, exterior brushed – Lock: 3 mm double-bit
– Rear panel: Stainless steel, 1.4301 (AISI 304), 1.5 mm, exterior – 2 TS punched rails 18 x 38 mm
brushed Colour:
– Gland plates: Stainless steel, 1.4301 (AISI 304), 1.5 mm – RAL 7035
– Mounting plate: Sheet steel, 3.0 mm
Protection category IP to IEC 60 529:
Surface finish: – IP 55
– Enclosure, door and rear panel: Brushed, grain size 400
– Gland plates: Uncoated Protection category NEMA:
– Mounting plate: Zinc-plated – NEMA 12

Supply includes: IK Code:

– Enclosure, solid top and sides – IK10
– Door(s)
– Right hand door hinge with single-door enclosures, may be
swapped to opposite side

Stainless Steel 304

Base/Plinth 100mm Base/Plinth 200mm

Model No. Width mm Height mm Depth mm Door(s)
Front/Rear Side Front/Rear Side
5850500 600 1600 400 8701600 8701040 8702600 8702040 1
5851500 600 1800 500 8701600 8701050 8702600 8702050 1
5852500 800 1800 500 8701800 8701050 8702800 8702050 1
5853500 800 2000 600 8701800 8701060 8702800 8702060 1
5854500 1000 1800 400 8701000 8701040 8702000 8702040 1
5855500 1200 2000 500 8701200 8701050 8702200 8702050 2

[Link] | 0800 748 825 25

NEMA 4 System Enclosure SE 8

Material: – Mounting plate

– Enclosure frame: Sheet steel, 1.5 mm – Base, solid
– Door: Sheet steel, 2.0 mm – Rear panel, detachable
– Rear panel: Sheet steel, 1.5 mm – Lock: 3mm double-bit
– Base: Sheet steel, 1.5 mm – 2 TS punched rails 18 x 38 mm
– Mounting plate: Sheet steel, 3.0 mm Colour:
Surface finish: – RAL 7035
– Enclosure, door and rear panel: Dipcoated-primed, powder- Protection category IP to IEC 60 529:
coated on the outside, textured paint – IP 66
– Mounting plate: Zinc-plated
– Base: Dipcoat-primed and powder-coated, textured paint Protection category NEMA:
– NEMA 4
Supply includes:
– Enclosure, solid top and sides IK code:
– Door(s) – IK10
– Door hinged on the right, may be swapped to the left

Mild Steel

Mounting Plate Mounting Plate

Model No. Width mm Height mm Depth mm
Width mm Height mm
5830580 600 1800 400 499 1696
5831580 800 1800 400 699 1696
5834580 800 2000 600 699 1896

26 1800 350 665 | [Link]

 NEMA 4X System Enclosure SE 8 Stainless Steel (304)

Material: – Mounting plate

– Enclosure: Stainless steel, 1.4301 (AISI 304), 1.5 mm, exterior – Base, solid
brushed – Lock: 3mm double-bit
– Door: Stainless steel, 1.4301 (AISI 304), 2 mm, exterior brushed – 2 TS punched rails 18 x 38 mm
– Rear panel: Stainless steel, 1.4301 (AISI 304), 1.5 mm, exterior Protection category IP to IEC 60 529:
brushed – IP 66
– Gland plates: Stainless steel, 1.4301 (AISI 304), 1.5 mm
– Mounting plate: Sheet steel, 3.0 mm Protection category NEMA:
– NEMA 4X
Surface finish:
– Enclosure, door and rear panel: Brushed, grain size 400 IK code:
– Gland plates: Uncoated – IK10
– Mounting plate: Zinc-plated
Supply includes:
– Enclosure, solid top and sides
– Door(s)
– Door hinged on the right, may be swapped to the left
– Rear panel, detachable

Stainless Steel 304

Mounting Plate Width Mounting Plate Height

Model No. Width mm Height mm Depth mm
mm mm
5850580 600 1600 400 499 1496
5852580 800 1800 500 699 1696
5853580 800 2000 600 699 1896

Large Enclosure Configurator

Search for enclosures by size or part

number
Enclosures

Visit [Link] / [Link]

>> Support>>Software>>Configurators>>
Rittal Configurator System>>Start

[Link] | 0800 748 825 27

Innovative

New base/plinth system

Fully compatible with enclosure systems

TS 8, TS IT, SE 8, PC, IW, CM, TP

Replaces the Flex-Block base/plinth system

and the TS base/plinth

Converstion made easy

Base/plinth TS, Flex-Block, NEW: Sheet Base/plinth TS, Flex-Block, NEW: Sheet
Width sheet steel, plastic, Steel Depth sheet steel, plastic, Steel
RAL 7022 RAL 9005 RAL 9005 RAL 7022 RAL 9005 RAL 9005

100 base/ 100 base/

Base/plinth com- Trim Corner Base/plinth
plinth plinth trim
ponents panels pieces components
system panels
400 8601400 8100400 8620001 400 8601040 8100400 8620031
600 8601600 8100600 + 8620002
500 8601050 8100500 8620032
800 8601800 8100800 + 8100000 8620003
600 8601060 8100600 8620033
1000 8601000 8100010 + 8620005
1200 8601200 8100120 + 8620007 800 8601080 8100800 8620034

200 base/ 200 base/

plinth plinth trim
system panels
400 8602400 8200400 + 8620021 400 8602040 8200400 8620041
600 8602600 8200600 + 8620022
500 8602050 8200500 8620042
800 8602800 8200800 + 8200000 8620023
600 8602060 8200600 8620043
1000 8602000 8200010 + 8620024
1200 8602200 8200120 + 8620025 800 8602080 8200800 8620044

28 1800 350 665 | [Link]

 Freestanding Bayable Enclosures TS 8

Material: – Roof plate and rear panel

– Enclosure frame: Sheet steel, 1.5 mm – Roof: Sheet steel, 1.5 mm – Gland plates and Mounting plate
– Door: Sheet steel, 2.0 mm – Rear panel: Sheet steel, 1.5 mm – 2 TS punched rails 18 x 38 mm
– Gland plates: Sheet steel, 1.5 mm – 4 eyebolts
– Mounting plate: Sheet steel, 3.0 mm – Lock: 3mm double-bit
– 2 support strips fitted in the enclosure depth
Surface finish:
– Enclosure frame: Dipcoat-primed Colour:
– Door, roof and rear panel: Dipcoated-primed, powder-coated on – RAL 7035
the outside, textured paint Protection category IP to IEC 60 529:
– Mounting plate and gland plates: Zinc-plated – IP 55
Supply includes: Protection category NEMA:
– Enclosure frame – NEMA 12
– Door(s), right hand door hinge with single-door enclosures, may
be swapped to opposite side IK Code:
– IK09

Mild Steel

Width Height Depth Base/Plinth 100mm Base/Plinth 200 mm

Model No. Side Panels Door(s)
mm mm mm Front/Rear Side Front/Rear Side
8615500 600 1200 500 8115235 8620002 8620032 8620022 8620042 1
8645500 600 1400 500 8145235 8620002 8620032 8620022 8620042 1
8665500 600 1600 500 8165235 8620002 8620032 8620022 8620042 1
8684500 600 1800 400 8184235 8620002 8620031 8620022 8620041 1
8685500 600 1800 500 8185235 8620002 8620032 8620022 8620042 1
8686500 600 1800 600 8186235 8620002 8620033 8620022 8620043 1
8604500 600 2000 400 8104235 8620002 8620031 8620022 8620041 1
8605500 600 2000 500 8105235 8620002 8620032 8620022 8620042 1
8606500 600 2000 600 8106235 8620002 8620033 8620022 8620043 1
8608500 600 2000 800 8108235 8620002 8620034 8620022 8620044 1
8626500 600 2200 600 8126235 8620002 8620033 8620022 8620043 1
8815500 800 1200 500 8115235 8620003 8620032 8620023 8620042 1
8845500 800 1400 500 8145235 8620003 8620032 8620023 8620042 1
8865500 800 1600 500 8165235 8620003 8620032 8620023 8620042 1
8884500 800 1800 400 8184235 8620003 8620031 8620023 8620041 1
8885500 800 1800 500 8185235 8620003 8620032 8620023 8620042 1
8880500 800 1800 500 8185235 8620003 8620032 8620023 8620042 2
8886500 800 1800 600 8186235 8620003 8620033 8620023 8620043 1
8881500 800 1800 600 8186235 8620003 8620033 8620023 8620043 2
8804500 800 2000 400 8104235 8620003 8620031 8620023 8620041 1
8805500 800 2000 500 8105235 8620003 8620032 8620023 8620042 1
8806500 800 2000 600 8106235 8620003 8620033 8620023 8620043 1
8808500 800 2000 800 8108235 8620003 8620034 8620023 8620044 1
8826500 800 2200 600 8126235 8620003 8620033 8620023 8620043 1
8828500 800 2200 800 8128235 8620003 8620034 8620023 8620044 1
8084500 1000 1800 400 8184235 8620005 8620031 8620024 8620041 1

[Link] | 0800 748 825 29

Freestanding Bayable Enclosures TS 8

Material: – Roof plate and rear panel

– Enclosure frame: Sheet steel, 1.5 mm – Roof: Sheet steel, 1.5 mm – Gland plates and Mounting plate
– Door: Sheet steel, 2.0 mm – Rear panel: Sheet steel, 1.5 mm – 2 TS punched rails 18 x 38 mm
– Gland plates: Sheet steel, 1.5 mm – 4 eyebolts
– Mounting plate: Sheet steel, 3.0 mm – Lock: 3mm double-bit
– 2 support strips fitted in the enclosure depth
Surface finish:
– Enclosure frame: Dipcoat-primed Colour:
– Door, roof and rear panel: Dipcoated-primed, powder-coated on – RAL 7035
the outside, textured paint Protection category IP to IEC 60 529:
– Mounting plate and gland plates: Zinc-plated – IP 55
Supply includes: Protection category NEMA:
– Enclosure frame – NEMA 12
– Door(s), right hand door hinge with single-door enclosures, may
be swapped to opposite side IK Code:
– IK09

Mild Steel
Width Height Depth Base/Plinth 100mm Base/Plinth 200mm
Model No. Side Panels Door(s)
mm mm mm Front/Rear Side Front/Rear Side
8080500 1000 1800 400 8184235 8620005 8620031 8620024 8620041 2
8005500 1000 2000 500 8105235 8620005 8620032 8620024 8620042 2
8006500 1000 2000 600 8106235 8620005 8620033 8620024 8620043 2
8215500 1200 1200 500 8115235 8620007 8620032 8620025 8620042 2
8245500 1200 1400 500 8145235 8620007 8620032 8620025 8620042 2
8265500 1200 1600 500 8165235 8620007 8620032 8620025 8620042 2
8284500 1200 1800 400 8184235 8620007 8620031 8620025 8620041 2
8285500 1200 1800 500 8185235 8620007 8620032 8620025 8620042 2
8286500 1200 1800 600 8186235 8620007 8620033 8620025 8620043 2
8204500 1200 2000 400 8104235 8620007 8620031 8620025 8620041 2
8205500 1200 2000 500 8105235 8620007 8620032 8620025 8620042 2
8206500 1200 2000 600 8106235 8620007 8620033 8620025 8620043 2
8208500 1200 2000 800 8108235 8620007 8620034 8620025 8620044 2
8226500 1200 2200 600 8126235 8620007 8620033 8620025 8620043 2
8228500 1200 2200 800 8128235 8620007 8620034 8620025 8620044 2

XAU86860199M Inner door to suit 600 x 1800 TS 8 & SE 8 System Enclosure Inner Doors
XAU86060199M Inner door to suit 600 x 2000 TS 8 & SE 8
Other sizes upon request
XAU88860199M Inner door to suit 800 x 1800 TS 8 & SE 8
New

XAU88060199M Inner door to suit 800 x 2000 TS 8 & SE 8 Also require 2 x 2420000 cam locks per inner door

30 1800 350 665 | [Link]

 Freestanding Bayable Enclosures TS 8 Stainless Steel (304)

Material: – Door(s), right hand door hinge with single-door enclosures, may
– Enclosure frame: Stainless steel, 1.4301 (AISI 304), 1.5 mm be swapped to opposite side
– Roof: Stainless steel, 1.4301 (AISI 304), 1.5 mm, exterior brushed – Roof plate, rear panel, gland plates and mounting plate
– Door: Stainless steel, 1.4301 (AISI 304), 2 mm, exterior brushed – 4 eyebolts – Lock: 3mm double-bit
– Rear panel: Stainless steel, 1.4301 (AISI 304), 1.5 mm, exterior – 2 TS punched rails 18 x 38 mm
brushed – 2 support strips fitted in the enclosure depth
– Gland plates: Stainless steel, 1.4301 (AISI 304), 1.5 mm Protection category IP to IEC 60 529:
– Mounting plate: Sheet steel, 3.0 mm – IP 55
Surface finish: Protection category NEMA:
– Enclosure frame and gland plates: Exterior brushed, grain size 400 – NEMA 12
– Door, roof and rear panel: Exterior brushed, grain size 400
– Mounting plate: Zinc-plated IK Code:
– IK09
Supply includes:
– Enclosure frame Options:
– Models available in 316 Stainless Steel / Models available in NEMA
Stainless steel 304

Width Height Depth Base/Plinth 100mm Base/Plinth 200mm

Model No. Side Panels Door(s)
mm mm mm Front/Rear Side Front/Rear Side
8457600 600 1800 500 8700850 8701600 8701050 8702600 8702050 1
8452600 600 2000 600 8700060 8701600 8701060 8702600 8702060 1
8454600 800 1800 400 8700840 8701800 8701040 8702800 8702040 1
8455600 800 1800 500 8700850 8701800 8701050 8702800 8702050 1
8450600 800 2000 600 8700060 8701800 8701040 8702800 8702040 1
8453600 1200 1800 500 8700850 8701200 8701050 8702200 8702050 2
8456600 1200 1800 400 8700840 8701200 8701040 8702200 8702040 2
8451600 1200 2000 600 8700060 8701200 8701060 8702200 8702060 2

Stainless Steel 316L available on request

[Link] | 0800 748 825 31

NEMA 4 Baying Systems TS 8

Material: – 4 eyebolts
– Enclosure frame: Sheet steel, 1.5 mm – Roof: Sheet steel, 1.5 mm – Lock: 3mm double-bit
– Door: Sheet steel, 2.0 mm – Rear panel: Sheet steel, 1.5 mm – 2 TS punched rails 18 x 38 mm
– Base: Sheet steel, 1.5 mm – 2 support strips fitted in the enclosure depth
– Mounting plate: Sheet steel, 3.0 mm – Accessory kit for side panels for upgrading to IP 66

Surface finish: Colour:

– Enclosure frame, door, roof and rear panel: Dipcoated-primed, – RAL 7035
powder-coated, textured paint Protection category IP to IEC 60 529:
– Mounting plate: Zinc-plated – IP 66
Supply includes: Protection category NEMA:
– Enclosure frame – NEMA 4
– Door, hinged on the right, may be swapped to the left
– Roof plate and rear panel IK Code:
– Base, solid and Mounting plate – IK09

Mild Steel

Width Height Depth Mounting Plate

Model No. Door(s) Side Panels
mm mm mm Width mm Height mm
8806580 800 2000 600 699 1896 1 8106235

LED System Light

See page 35
New

Contact your account manager for more information

32 1800 350 665 | [Link]