Scribd
Upload
140 views1 page

Temasil Blue Technical Specs

Temasil Blue is a superior quality compressed non-asbestos jointing sheet made from heat resistant fibers and NBR rubber. It can withstand high pressures and temperatures for sealing steam, oils, gases, and chemicals. Temasil Blue has a density of 1.7-2.0 g/cm3, can compress 5-15%, and recover at least 50% according to standard tests. It is blue in color with a one-sided print and is recommended for sealing systems operating at 10 MPa and up to 250°C.

Uploaded by

alkjgh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
140 views1 page

Temasil Blue Technical Specs

Temasil Blue is a superior quality compressed non-asbestos jointing sheet made from heat resistant fibers and NBR rubber. It can withstand high pressures and temperatures for sealing steam, oils, gases, and chemicals. Temasil Blue has a density of 1.7-2.0 g/cm3, can compress 5-15%, and recover at least 50% according to standard tests. It is blue in color with a one-sided print and is recommended for sealing systems operating at 10 MPa and up to 250°C.

Uploaded by

alkjgh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Technical Specification - Temasil Blue

Temasil Non Asbestos Sheet Blue (Compressed Non Asbestos Jointing sheet) is a superior quality
compressed fibre jointing, manufactured from a blend of special heat resistant fibres with a high quality
NBR rubber binder. Recommended for sealing steam, oils, condensate, fuels, hydrocarbons, gases,
most dilute acids and alkalis. Conforms to BS 7531 Grade X.

Also available with wire reinforcement, complete with graphite coating.

Technical Specification

Technical Data
Highest working overpressure MPa 10
permanently 250 (steam
Highest allowed working temperature °C
short-term 400 200)
Use: Tested to Corresponding
Water, water steam, gases, oils, basic chemicals standard
Permanently Checked
DENSITY [Link]-3 1,7 - 2,0 TP 62-71-01 DIN 28 090 - 2
HEAT LOSS max. % 27 TP 62-71-01 ASTM F 495
RESIDUAL STRESS 16 h/175 °C +/≈ MPa 30 TP 62-71-01 DIN 52913
RESISTANCE IN FLUIDS
- THICKNESS CHANGE
DISTILLED WATER 4 TP 62-71-01 ASTM F 146
5 h/boiling point max.
FLUID B, CSN ISO 1817 5 TP 62-71-01 ASTM F 146
%
5 h/23°C max.
OIL IRM 903, CSN ISO 1817 4 TP 62-71-01 ASTM F 146
%
5 h/150 °C max.
TOLUENE 20 TP 62-71-01 ASTM F 146
%
5h/23°C max.
COOLING LIQUID 5 TP 62-71-01 ASTM F 146
%
5h/boiling point max.
COMPRESSIBILITY % 5 - 15 TP 62-71-01 ASTM F 36
RECOVERY min. % 50 TP 62-71-01 ASTM F 36
SPEC. AMOUNT OF 0,04 TP 62-71-01 DIN 3535-6/99
mg/(s.m)
LEAKAGE max.
must not show TP 62-71-01 -
FLEXURE RESISTANCE
cracks and breaks
BLUE – with one sided print TEMASIL
COLOUR AND PRINT DIN 28 091-2 FA-MA 1-0
ASTM F 104 – F 712 111 M5
NOTE:
a) parameters are obtained from sheets testing of thickness 2,0 mm
b) +/value valid for thickness of 1,5 mm

As the function and durability of the products depend upon a number of factors, the data may not be used to support any warranty
claims.

Talus Technical Services Inc.


111, Huntington Avenue, Scarborough, Ontario ON M16 4L4, Canada
[Link]

You might also like