MCQ’s

1) What is the full form of AutoCAD?

a. Automatic Computer-Aided Design
b. Automated Computer Application Design
c. Automatic Computer-Aided Data
d. None of the Above

2) Which of the following workspaces are available in AutoCAD?

a. 3D basics
b. 3D modeling
c. Drafting and Annotation
d. All of the above

3) In which plane in AutoCAD, all objects are drawn?

a. YZ plane
b. XZ plane
c. XY plane
d. ZX plane

4) Which file format is used in the AutoCAD design?

a. .dwg
b. .kmz
c. .png
d. .jnp

5) What is an angular dimension?

a. Measures the angle between two lines
b. Measures the angle between two points
c. Measures distance between two points
d. Measures distance between two lines

12
6) ctrl+A command is used to?

a. Select object
b. Select all objects
c. Select a line
d. Delete object

7) Osnap mode is used to?

a. To draw horizontally
b. To draw vertically
c. To draw from particular line
d. All of above

8) Ortho mode is used to?

a. Draw vertical lines

b. Draw horizontal lines
c. All of above
d. None of above

9) Press C to?

1. Open object
2. Close the object
3. Delete object
4. All of above

10) Press U to?

a. Undo
b. Redo
c. Delete
d. All of above

13
 Multiple Choice Questions

1. What do the letters UCS

A. Uniform Calculator System
B. United CAD System
C. Universal CAD Settings
D. Universal Coordinate System
2. The primary purpose of the UCS (User Coordinate System) is?
A. Helps a user to calculate the area of an object.
B. To determine angles for isometric projections.
C. Allows a user to select the desired type of drawing units.
D. Allows a user to draw on a specified 2D Plane in 3D space.
3. All of the axes in the 3D coordinate system meet at
A. 60° angles.
B. 90° angles.
C. 120° angles.
D. 135° angles.
4. Where should you pay attention when you are working with AutoCad commands?
A. Drawing area
B. Status bar
C. Tool bars
D. Command window
5. Polar coordinates are used mostly for drawing_____
A. Arc
B. Ellipse
C. Angular lines
D. None of the above
6. Which command convert discrete objects in polyline
A. Union
B. Subtract
C. Join
D. Polyline

27
 7. When in absolute Cartesian coordinates have points A (10.8) and B (6.5), then to
make a line from A -> B with relative polar coordinates will write
A. @ -5 <36.88
B. @ 4 <30
C. @ 5 <216,88
D. @ 3 <60
8. How many points do you need to define for the rectangle command?
A. One
B. Two
C. Three
D. Four
9. How many SNAP points does an object have?
A. 1
B. 4
C. 5
D. Depend on object
10. The origin of a drawing is at
A. 0,0
B. 1,0
C. 0,1
D. 1,1
1 D 2 D 3 B 4 D 5 C
6 C 7 C 8 B 9 D 10 A

28
The drawing is now exploded and if you select it now, all its lines and arcs will be selected
separately:

Multiple Choice Questions

A. A Polyline can be broken into individual lines and arcs using which of the following
command?
A. Break
B. Trim
C. Explode
D. Overkill

B. A fillet command is used to produce

A. Sharp corners
B. Round corners
C. Both of the above
D. None of the above

C. The function of a polar array is to create object,

A. In a grid pattern
B. In a circular pattern
C. In a straight line
D. All the above

D. The command used to convert separate entities into a polyline,

A. Union
B. Subtract
C. Join
D. Polyline
E. Scale command can be access________
A. S

41
 B. C
C. Ss
D. Sc

F. A fillet surface is used to

A. Reshape a bicubic Coons patch with smooth curves.
B. Round the edges of a planar surface.
C. Blend two surfaces together.
D. Convert facets into smooth curves.

G. Shortcut for Trim command is,

A. T
B. TR
C. TI
D. X

H. Fillet in various corners can be created simultaneously using which command,

A. Loop
B. Chain
C. Multiple
D. Edge
I. AutoCAD commands can be accessed in,
A. Drawing area
B. Status bar
C. Tool bars
D. Command window

J. Various methods to access PAN command,

A. Right click and select PAN from contextual menu
B. PAN command
C. Press and hold middle mouse button
D. All of the above

Answer Key
1. C 2. C 3. B 4. C 5. D
6. C 7. B 8. A 9. D 10. D

42
 MCQS:-
[Link] does associative hatch?
A. Monitors the changes in shape that fills
B. Relates to the other hatch plan
C. Both of the above
D. None of the above

[Link] is the difference between command Plot and Print?

A. plot command prints only big plans
B. The plot command for CNC (CAMplan)
C. No difference
D. Print command can print up to A3 size paper
[Link] you change the scale list a project that I have started from 1:50 1:10 then.
A. You will have to start over
B. You should not raise the objects already exist (scale) by 5
C. You will not need to change anything in hitherto methodology
D. Should be converted into new items that will add based on the new scale

[Link] of the following is NOT a unit of length measurement?

A. Yards
B. Parsecs
C. Microns
D. Grads

[Link] does the command Wblock ?

A. Warp-speed block
B. Write block
C. Window block
D. Wide-area block

[Link] 330 degrees same as -30 degrees in a drawing?

A. True
B. False

[Link] should you pay attention when you are working with autocad commands?
A. Drawing area

46
 B. Status bar
C. Tool bars
D. Command window
[Link] coordinates are used mostly for drawing ?
A. Arc
B. Ellipse
C. Angular lines
D. None of the above

[Link] many SNAP points does an object have?

A. 1
B. 4
C. .5
D. Depend on object

[Link] many points do you need to define for the rectangle command?
A. One
B. Two
C. Three
D. Four

MCQS KEY
1 2 3 4 5 6 7 8 9 10
A C D D B A D C D B

47
 MCQS:-

[Link] methods to access PAN command,

A. Right click and select PAN from contextual menu
B. PAN command
C. Press and hold middle mouse button
D. All of the above

[Link] file extension that cannot be accessed by AutoCAD,

A. Dwg
B. Dxf
C. Doc
D. Dws
[Link] AutoCAD, polar coordinate is used for creating,
A. Arc
B. Ellipse
C. Angular lines
D. None of the above

[Link] hatch pattern used to fil a closed area,

A. ANSI31
B. ANGLE
C. SOLID
D. Filled area can’t be made with hatch command
[Link] state grid is used to design perspective?
A. Parametric
B. Isometric
C. Pro-optic
D. Rectangular
[Link] is the highest value of layer transparency?
A. 100
B. 30
C. 90
D. 4
[Link] number of ways a circle can be created in AutoCAD.
A. 5
B. 6
C. 8

59
 D. 9
[Link] factor of hatch command you will change to correct the spacing between hatch lines
or pattern?
A. Angle
B. Pattern
C. Scale
D. Layer
[Link] AutoCAD, scaling function is used for making an object,
A. Smaller
B. Bigger
C. Either smaller or bigger
D. None of the above
[Link] of the following tool cannot be used to make 2D views from 3D drawing?
A. Flatten
B. Flat shot
C. Layout Views
D. Section Plane

MCQS KEYS:

1 2 3 4 5 6 7 8 9 10
D C A C B D B C C D

60
 MCQS:
[Link] of mouse can perform which following action?
A. Zoom in/zoom out
B. Pan & scan
C. Extents/all
D. Scale

[Link] there any difference between Command Plot and Print?

A. Plot command prints only big plans
B. The plot command for CNC (CAM)
C. No difference
D. Print command can print up to A3 size paper
[Link] the false statement in regards with “If an array is made associative”.
A. You can’t use Boolean operations on the array elements
B. To make the array non associative you need to use explode command on it
C. The array can be edited again by selecting it
D. The array can’t be modified in any way once it is made associative
[Link] open area can be filled with which of the following gradient:
A. Gap
B. Tolerance
C. Transparency
D. Open
[Link] shortcut to start a table is,
A. T
B. TA
C. TBL
D. TABLE
[Link] is the shortcut for zoom command?
A. Z Command
B. Rotate mouse wheel
C. ZOOM Command
D. All of the above
7.A line shows its dimension as 14.52. What is the precision of this line?
A. 10.0]
B. 10.00]
C. [0.000]
D. Display of length has nothing to do with precision

62
[Link] key for Multileader in AutoCAD 2022,
A. ML
B. MLN
C. MLEADER
D. MULTI
9.A Boolean operation that is used to select interfering region between solids,
A. Union
B. Intersect
C. Subtract
D. None of the above
[Link] symbol that shows snap point to the closet point,
A. With circles and dots in the centre
B. With two triangles
C. With three orthogonal
D. With Diamond

MCQS KEYS
1 2 3 4 5 6 7 8 9 10
C C D B D D B C B C

63
 MCQ
[Link] is part of commands in AutoCAD?
A. Draw commands
B. Modify commands
C. Annotation commands.
D. None

[Link] is the use of mirror command in AutoCAD?

A. Create a copy selected object
B. Cut selected object
C. Trim selected object
D. Create mirror object of selected object

[Link]’s the use of group command in AutoCAD?

A. To combine a drawing element
B. To separate drawing element
C. A and B both
D. None

[Link] is the default file format for drawing in AutoCAD?

A. .Kmz
B. .png
C. .dwg
D. .Jpg

[Link] is the use of polar tracking in AutoCAD?

A. To specify end points
B. To specify angles
C. To specify midpoint
D. None

[Link] are annotation objects in AutoCAD?

A. Dimensions,
B. Notes
C. Explanatory symbols
D. All of above

66
[Link] produces drawings with help of?
A. Lines
B. Shape tools
C. Arcs
D. All of above

[Link] is the use of AutoCAD drawing template?

A. Store default settings,
B. Store styles, and
C. Stom additional date
D. All of above

[Link] cut key of polyline in AutoCAD?

A. PL
B. LN
C. DL
D. LP

[Link] of the following tools have one key shortcut key in AutoCAD?
A. Saves the current drawing
B. Arc
C. Zoom
D. All of above

MCQS Key:-
1 2 3 4 5 6 7 8 9 10
C D A C B D D D A D

67
 MCQS:

[Link] print the entire project, you will choose to regulate what to plot.
A. Display
B. Extends
C. Limits
D. Window

[Link] layer that can be deleted from the layer property manager,
A. Layer
B. Defpoints
C. Layer containing objects
D. Frozen layer not containing objects

[Link] maximum number of layers that a drawing can have?

A. 1
B. 2
C. As many as depending on the complexity
D. None of the above

[Link] hatch pattern used to fil a closed area,

A. ANSI31
B. ANGLE
C. SOLID
D. Filled area can’t be made with hatch command

[Link] state grid is used to design perspective?

A. Parametric
B. Isometric
C. Pro-optic
D. Rectangular
[Link] position of the camera can be tuned accurately using.
A. Pan
B. Zoom
C. Orbit
D. Navigation Wheel

[Link] is the highest value of layer transparency?

81
 A. 100
B. 50
C. 30
D. 90

[Link] inclined angle can be produced using which command.

A. <
B. >
C. @
D. #

[Link] command that is not suitable to start print command,

A. PRINT
B. PR
C. PLOT
D. Ctrl+P

[Link] function of a polar array is to create object,

A. In a grid pattern
B. In a circular pattern
C. In a straight line
D. All the above

MCQ’S KEYS
1 2 3 4 5 6 7 8 9 10
A D C C B D D A B B

82
 Practical NO #10

MCQS:
1. An object can be obtained from a block by using
A. EXPLODE
B. OVERKILL
C. REDEFINE
D. UNGROUP

[Link] symbol that shows snap point to the closet point.

A. With circles and dots in the centre
B. With two triangles
C. With three orthogonal
D. With Diamond
E.
[Link] order to measure the dimensions of a land, the surveyor uses which of the following
system.
A. No one method
B. Related Cartesian coordinates
C. Absolute polar coordinates
D. None of the above

[Link] command that is used to convert a block into a drawing object.

A. EXPLODE
B. OVERKILL
C. REDEFINE
D. UNGROUP

5. Which of the following options cannot be used to represent a line?

A. Yards
B. Parsecs
C. Microns
D. Grads

6. A fillet command is used to produce.

A. Sharp corners
B. Round corners
C. Both of the above

83
 D. None of the above
7. Which one of the following is not a property of an object?
A. Line weight
B. Measure
C. Hyperlink
D. Elevation

8. In MLine tool editor, symbol tool can be found on which panel?

A. Tools
B. Insert
C. Options
D. Formatting

9. Shortcut for Trim command is.

A. T
B. TR
C. TI
D. X

10. What command allows us to select objects based on some status?

A. Properties
B. Qselect
C. Pselect
D. Attributes

MCQ’S KEYS
1 2 3 4 5 6 7 8 9 10
A C A C D C B B B B

84