Location:
®
MI-FISH FISH SCALE INTERCEPTOR
Specification: MIFAB ® Series MI-FISH sanitary powder epoxy coated inside and outside fabricated 10 gauge steel fish scale
interceptor. Unit shall include: Sediment bucket with perforated baffle near inlet (3/8” (9) holes), primary removable straining baffle
(1/2” (13) thick with 1/4” (6) holes), secondary removable straining baffle (1/2” (13) thick with 1/8” (3) holes), securing bolt(s),
removable cross bar, stainless steel calibrated orfice plate and steel powder epoxy coated non skid rectangular gasketed lid(s).
Function: Used in commercial fish processing facilities to receive wastewater with fish scales and sediment through the side
inlet. Primary and secondary straining removable baffles are designed to capture debris and prevent drain line clogging.
Electrostatically applied powder epoxy coating ensures extra long life.
SECURING BOLT(S) (5/8” (16) DIAMETER REMOVABLE NON SKID LID(S) DESIGNED
FOR IN FLOOR OR ABOVE GROUND
INSTALLATION USING THE SAME
CALIBRATED STAINLESS
INTERCEPTOR
STEEL ORFICE PLATE
OVERSIZE NEOPRENE
GASKET (1” x 1/2”) (25” x 13)
MJ (NO HUB)
INLET
SEDIMENT BUCKET WITH 1/2”(13) FEET ELEVATE
PERFORATED BAFFLE BESIDE THE BOTTOM OF THE
INLET 3/8” (9) HOLES. INTERCEPTOR FROM
THE WET GROUND
PRIMARY REMOVABLE STRAINING
BAFFLE (1/2” (13) THICK, 1/4” (6) HOLES)
SECONDARY REMOVABLE STRAINING MJ (NO-HUB) OUTLET
BAFFLE WITH HANDLE (1/2”(13) THICK, 1/8”
(3) HOLES).
Metric equivalents see chart below. (Dimension) Denotes Millimetres
Note: The “C” dimension detailed above is from either the middle of the inlet or the outlet to the top the interceptor.
The inlet and outlet dimensions are always the same.
MODEL US NO. OF NO. OF LIQUID HOLDING
NO. GPM A B C D E F LIDS BOLTS CAP. (U.S.G)
MI-FISH-1 50 29.5” (750) 20” (508) 3” (76) 17” (432) 20” (508) 2” (51) 1 4 34.29
MI-FISH-2 70 29.5” (750) 20.5” (520) 4” (102) 20” (508) 24” (610) 3” (76) 1 4 40.74
MI-FISH-3 100 33.5” (850) 26” (660) 4” (102) 26” (660) 30” (762) 3” (76) 2 4 80.18
MI-FISH-4 130 37.5” (952) 30” (762) 4” (102) 28” (711) 32” (813) 3” (76) 2 8 114.03
MI-FISH-5 150 55.5” (1 409) 26” (660) 6” (152) 30” (762) 36” (914) 4” (102) 2 8 155.64
MI-FISH-6 200 67.5” (1714) 28” (711) 8” (203) 32” (813) 40” (1016) 6” (152) 3 12 213.80
MI-FISH-7 300 67.5” (1 714) 28” (711) 10” (254) 44” (11 18) 54” (13 72) 6” (152) 3 12 302.21
MI-FISH-8 400 67.5” (1714) 30” (762) 12” (305) 54” (1372) 66” (1676) 6” (152) 3 12 404.91
MI-FISH-9 500 67.5” (1714) 40” (1016) 10” (254) 50” (1270) 60” (1524) 6” (152) 3 12 506.42
MI-FISH-10 700 91.5” (2324) 40” (1016) 8” (203) 54” (1372) 62” (1575) 6” (152) 4 16 868.60
MIFISH-11
- 700 98” (2489) 50” (12 70) 12” (305) 54” (13 72) 66” (16 76) 6” (152) 4 16 1018.39
MI-FISH-12 700 98” (2489) 50” (1270) 12” (305) 80” (2032) 92” (2337) 6” (152) 4 16 1536.90
Note: The “C” dimension detailed above is from either the middle of the inlet or the outlet to the top the interceptor.
The inlet and outlet dimensions are always the same.
SUFFIX OPTIONAL VARIATIONS: SUFFIX SUFFIX
-AL Aluminum lid(s) -FLM Anchor flange and membrane -SS Stainless steel interceptor
-AP Anode pack clamp -T F.I.P. female threaded inlet
-BA Buy American Act -HD Heavy Duty load rated lids and outlet
compliant product -HLA High level alarm -TL Lid(s) to receive tile or terrazzo
-C Extension “C” as required -RSSB Replacement stainless specify Special size inlet and outlet
-FL Anchor flange steel baffle
-FLC Flow control fitting
Job Name: Page No:
Section No: Contractor:
Schedule No: Purchase Order No:
MIFAB reserves the right to make changes in material and design without formal notice and obligation. USA: 1-800-465-2736 [Link] CAN: 1-800-387-3880
Page I29 2020-11-15
