#include <Wire.
h> // include Arduino wire library for I2C devices
#include <Adafruit_GFX.h> // include Adafruit graphics library
#include <Adafruit_SSD1306_STM32.h> // include Adafruit SSD1306 OLED display driver
#include <GravityTDS.h>
#define OLED_RESET 4 // define display reset pin
Adafruit_SSD1306 display(OLED_RESET);
#define DS18B20_PIN 2 // define DS18B20 data pin connection
#define TdsSensorPin 3 // define tds pin connection
GravityTDS gravityTds;
float tdsValue = 0; // assigning the tds value variable
void setup(void)
delay(1000); // wait a second
[Link](SSD1306_SWITCHCAPVCC, 0x3C); // initialize the SSD1306 OLED display with I2C address
0x3C
[Link](); // clear the display buffer.
[Link](); //updating our tds sensor for the value
tdsValue = [Link](); // getting tds vlaue from the sensor
[Link](2);
[Link](WHITE, BLACK);
[Link](34, 5);
[Link](1);
[Link](WHITE, BLACK);
[Link](29, 33);
[Link]("Temperature:");
[Link](2);
[Link](38,7);
[Link](TdsSensorPin);
[Link](5.0); //reference voltage on ADC, default 5.0V
[Link](1024); //1024 for 10bit ADC;4096 for 12bit ADC
[Link](); //initialization
[Link](40,9);
[Link](0, 0);
[Link]("TDS:");
[Link](tdsValue,0);
[Link]("PPM");
int ds18b20_temp;
char _buffer[11];
void loop()
{
[Link](1, 50);
if(ds18b20_read(&ds18b20_temp))
if (ds18b20_temp & 0x8000) // if temperature < 0
ds18b20_temp = ~ds18b20_temp + 1; // change temperature value to positive form
sprintf(_buffer, "-%02u.%04u C", (ds18b20_temp/16) % 100, (ds18b20_temp & 0x0F) * 625);
else
{ // otherwise (temperature >= 0)
if (ds18b20_temp/16 > 100) // if temperature >= 100 °C
sprintf(_buffer, "%03u.%04u C", ds18b20_temp/16, (ds18b20_temp & 0x0F) * 625);
else // otherwise ( 0 <= temperature < 100)
sprintf(_buffer, " %02u.%04u C", ds18b20_temp/16, (ds18b20_temp & 0x0F) * 625);
[Link](_buffer);
[Link](103, 52, 2, WHITE); // put degree symbol ( ° )
else{
[Link](" ERROR ");
[Link]();
delay(1000); // wait a second
[Link]();
tdsValue = [Link]()+2; // then get the value
bool ds18b20_start()
bool ret = 0;
digitalWrite(DS18B20_PIN, LOW); // send reset pulse to the DS18B20 sensor
pinMode(DS18B20_PIN, OUTPUT);
delayMicroseconds(500); // wait 500 us
pinMode(DS18B20_PIN, INPUT);
delayMicroseconds(100); // wait to read the DS18B20 sensor response
if (!digitalRead(DS18B20_PIN))
ret = 1; // DS18B20 sensor is present
delayMicroseconds(400); // wait 400 us
return(ret);
}
void ds18b20_write_bit(bool value)
digitalWrite(DS18B20_PIN, LOW);
pinMode(DS18B20_PIN, OUTPUT);
delayMicroseconds(2);
digitalWrite(DS18B20_PIN, value);
delayMicroseconds(80);
pinMode(DS18B20_PIN, INPUT);
delayMicroseconds(2);
void ds18b20_write_byte(byte value)
byte i;
for(i = 0; i < 8; i++)
ds18b20_write_bit(bitRead(value, i));
bool ds18b20_read_bit(void)
bool value;
digitalWrite(DS18B20_PIN, LOW);
pinMode(DS18B20_PIN, OUTPUT);
delayMicroseconds(2);
pinMode(DS18B20_PIN, INPUT);
delayMicroseconds(5);
value = digitalRead(DS18B20_PIN);
delayMicroseconds(100);
return value;
byte ds18b20_read_byte(void)
byte i, value;
for(i = 0; i < 8; i++)
bitWrite(value, i, ds18b20_read_bit());
return value;
bool ds18b20_read(int *raw_temp_value)
if (!ds18b20_start()) // send start pulse
return(0);
ds18b20_write_byte(0xCC); // send skip ROM command
ds18b20_write_byte(0x44); // send start conversion command
while(ds18b20_read_byte() == 0); // wait for conversion complete
if (!ds18b20_start()) // send start pulse
return(0); // return 0 if error
ds18b20_write_byte(0xCC); // send skip ROM command
ds18b20_write_byte(0xBE); // send read command
*raw_temp_value = ds18b20_read_byte(); // read temperature LSB byte and store it on
raw_temp_value LSB byte
*raw_temp_value |= (unsigned int)(ds18b20_read_byte() << 8); // read temperature MSB byte and store
it on raw_temp_value MSB byte
return(1);
