Scribd
Upload
263 views1 page

Ankral R1

This document provides information on Ankral R1, a burned magnesia spinel brick made from synthetic sintered magnesia and in situ spinel. It lists the chemical analysis and physical properties of the brick, including its bulk density, apparent porosity, cold crushing strength, refractoriness under load, and resistance to thermal shocks. It also provides the thermal conductivity and linear thermal expansion of the brick at different temperatures, as well as the recommended mortar for use with the brick.

Uploaded by

gabrielelq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
263 views1 page

Ankral R1

This document provides information on Ankral R1, a burned magnesia spinel brick made from synthetic sintered magnesia and in situ spinel. It lists the chemical analysis and physical properties of the brick, including its bulk density, apparent porosity, cold crushing strength, refractoriness under load, and resistance to thermal shocks. It also provides the thermal conductivity and linear thermal expansion of the brick at different temperatures, as well as the recommended mortar for use with the brick.

Uploaded by

gabrielelq
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

RHI AG

Wienerbergstrasse 11, A-1100 Vienna


Postfach 143, A-1011 Wien, Austria
Tel.: +43/1/50213-0
Fax: +43/1/50213-213
E-mail: cement_lime@[Link]
Internet: [Link]

ANKRAL R1
Burned magnesia spinel brick made from synthetic sintered magnesia and in situ spinel. This product
combines good mechanical flexibility, high hot strength, corrosion resistance and good coatability.

Chemical Analysis

MgO 91,5 %
Cr2O3 -- %
Al2O3 7,0 %
Fe2O3 0,5 %
CaO 0,8 %
SiO2 0,3 %
MnO -- %

Physical Properties

Bulk Density 2,96 g/cm³ EN 993-1

Apparent Porosity 15,00 % EN 993-1

Cold Crushing Strength 60,00 N/mm² EN 993-5

Refractoriness under Load


ta > 1700 °C DIN 51064
t0,5 > 1700 °C EN 993-8

Resistance to Thermal Shocks (air) > 100 Cycles ENV 993-11

Temperature °C 500 750 1000


Thermal Conductivity W/mK 4,50 3,50 3,00
Linear Thermal Expansion % 0,52 0,86 1,21

Mortar RUBIMUR M2
approx. 1,5 - 4 % of brick weight (rotary kiln bricks)

The indicated values are standard values, i.e. values taken over a longer representative period of time according to either valid test standards or
internal test methods of the company. They may not be regarded as committed specifications and therefore not as guaranteed properties. We
reserve the right to further technical developments and new editions of technical product information.

Rev. No.: 3 Date: 01.11.04

You might also like